Need help for printing layers

Similar Questions

• need driver for printer epson action laser 1000 operating system windows 7

  Need driver for printer epson action laser 1000 windows operating system 7. driver not in the updates of the victory or in support of epson

  Thanks for any help

  If there is no Vista 32 or 64 bit drivers on Epson site, there will be none. Unless Epson make some. You will need to buy another printer that supports Win7

• Need help for optical safety circuit.

  I buy these parts and prototype with real components, but since I multisim, I thought it would be nice to create the circuit and maybe work through issues I can practically.

  I need a circuit that takes 120 VCA, generates 5 VDC and 1.5Vdc power of optical transmitter and receiver.  I actually use a data port because he has great range and is pretty cheap.  Rather than send the binary code well I just send a light stead that is broken or not broken through doors and windows in my house.  Then the receiver sees this as an entry and order a relay.

  I tried several voltage regulators that come with multisim, but I get an error of execution of my circuit.  Really I can't the 120 VAC to power levels necessary for the functioning of the optics.

  Otherwise I might want to run on a system 120Vdc with battery backup, so throw a 120Vdc up to 20 v DC switching power supply - but I have not found a SMP in the library which takes 120 as input and as output 20.

  Basic plan: 120VAC source-> transform to 24Vac-> Full bridge rectifier to ~ 20 v DC-> voltage capacitor filter on the input of two voltage regulators (1 to 5 VDC, 1 to 1.5Vdc) - then circuit since the two power supply of the transmitter and the receiver.

  I just need help for 5V and 1.5V, from there, I know that the real world circuit will work component tests already carried out.  Thanks for reading.

  I didn't Multism so I can't advise you on the compatible models. I ran the model on semiconductors with slight modifications of format on my SPICE simulator based on Berkeley Spice 3f5. I had to change the format of model resistance semiconductors appeal but has not changed any values.

  The output of your power supply circuit 3 (with 5 V, not the 1.5 V regulator regulator) was 4.99995 V.

  There are a few messages about changing templates published for compatibility Multisim woth. You can search those to see if there are any suggestions on what you'll need to fix in the model.

  Lynn

• I need help for the upgrade of my current system.

  I need help for the upgrade of my current system.

  I have SBS 2008 with (Exch 2007, SQL 2005, Sharepoint, backupexec 2010 for sbs) licenses.

  I want to make the larger environment using the following:

  (1) apply Virtualization

  (2) apply to the failover process (clustering)

  "(3) the environment must support adding server terminal server, ERP server, exchange server, domain controller, backup manager.

  Storage 4) that supports Raid (1 and 5)

  UTM excellent 6) that supports (SSL VPN, VPN Global)

  suitable backup solution 7)

  (8) good antivirus for clients

  my questions:

  (1) can you provide me with a good design for this environment

  (2) should I choose what operating system:

  Microsoft datacenter or company

  I know datacenter provide us the unlimited VM but needs per processor license

  so if I have two Grouped servers I want to buy 4 licenses

  and just 4 VMs per company license... to say that we have two servers and maintain 8 vms so wat happened if 1 goes down... How can I migrate the 4 virtual machines on the server failed to another server group... ? should I buy enterprise license?

  (3) if I get the SAN storage for data... How can I save this storage... should I get another SAN?

  (4) how can I upgrade SBS stad single server (windows standrad) without losing the licenses as Exch 2007, SQL 2005, sharepoint.is it a must to buy an edition full std server or there is a way to upgrade (license wise, I mean)?

  (5) what about win2k8 license for VM:

  lets say we have physical that has windows license so that enough to have windows for VM or should I buy windows for VM licenses?

  (6) can I use backExec license for SBS with windows 2008 standard

  (7) who better to virtualization AMD or INTEL

  (8) hyper V or VMware?

  (9) what of Microsoft data protection Manager... is this good?

  (10) what virtual machine manager? What are the benefites keys

  Thanks in advance

  Hello AnasAI,

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• I need help for activation of the real administrator account.

  I have a problem with Adobe reader 9 standard, Adobe customer service asked the unhide real administrator account before you can continue to help me.

  I need help for that.

  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  http://www.howtogeek.com/HOWTO/Windows-Vista/enable-the-hidden-administrator-account-on-Windows-Vista/

  Read the above info.

  See you soon. Mick Murphy - Microsoft partner

• Need driver for printer Samsung ML-1520 on Windows 7 Ultimate

  Need driver for printer Samsung ML-1520 on Windows 7 Ultimate

  Is your Google broken?

  http://www.Samsung.com/UK/support/model/ml-1520/XST

  Unlike a PCL or PostScript driver, a GDI printer driver based on Windows to do the printing.  See http://malta.oki.com/support/printer/troubleshooting/detail.aspx?id=tcm:179 - 140786-16

  A "universal printer driver" is often provided by printer manufacturers when they do not want a printer driver for specific printers.  It allows printing in a variety of printers from the manufacturer, but perhaps not all of the features that includes a driver specific to the model.

• I need help for my reader to USB drive on my windows 10 ACER?

  I need help for my reader to USB stick on my chrome windows 10 plug ins acer. Can you help me?

  What Adobe application that you use?

  This is the Adobe Media Encoder forum, and you did not mention anything on this subject. If you can let us know what Adobe application, you need help, we can help you make the right forum.

  Thank you

  Regalo

• Hello, I need help for cancel the payment on my adobe account.

  Hello, I need help for cancel the payment on my adobe account. I'm from Peru, Im paying a monthly fee as a student. Help, please...

  Cancel your membership creative cloud

• Hello, need help for Adobe Reader DC playing animation files that are specified in the pdf output by script Latex Beamer. My Adobe Reader DC refuse to open any format that I gave him.  Thank you very much

  Hello, need help for Adobe Reader DC playing animation files that are specified in the pdf output by script Latex Beamer. My Adobe Reader DC refuse to open any format that I gave him.  Thank you very much

  Hey ihorl18351266,

  Please note that you can open PDF files using only the CD player. Any other format will not be supported by the software.

  Kind regards

  Ana Maria

• I need help for my printer/scanner/copier to work with my computer

  I have a problem for my computer to connect with my printer/scanner/copier.  I need help!

  Hi GraceEverts,

  ·         What exactly happens when you try to connect printer/scanner/copier to work with my computer?

  ·         You receive an error message?

  ·         What is the brand and model of the printer/scanner/copier?

  I suggest to check the following items and check if it helps.

  To add a printer attached to your computer

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_setup_indirect_printer.mspx?mfr=true

   

  To install new or updated printer drivers to update

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_drivers_install_updatew.mspx?mfr=true

   

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

   

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

   

  To install a scanner or digital camera

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/scanner_camera_add.mspx?mfr=true

  Hope this information helps.

• Help with print layers

  I bought several reasons for sewing of pdf that are made so that you can print the layer with the size you need. I followed all the directions, but I can't make the layers appear. I use my iMac with OS El Capitan Office and upgrade to the latest version of Acrobat Reader. Other people can see the layers and select/deselect them for printing. The first picture is what I see. The second is another person with the same boss sees on his Mac. Can someone help me get the layers appears? Thank you!

  

  

  Well, I solved my problem. I downloaded another model with layers of a different website and it worked. I went back to the original and downloaded it again and this time it worked. Yes, problem solved! I have no idea why it wouldn't work the first time.

• Tecra R840 - need help for installing the SSD

  Hello

  Sorry, again, but I really need help with that?
  My new ssd (arriving in a few days) is a Plextor M5P which is 7 mm thick! My Tecra R840-16J have a thickness 9.5 mm HDD and what I've seen is no caddy!
  I would be grateful all the tricks for installing the ssd drive in my Tecra!

  Thanks for your time,

  Paulo

  Hello Paulo

  As far as I know that some models are available with drive HARD and some with SSD these models with SSD have small SSD support. SSD is fixed by 4 screws in this medium.

  I put t really know how to help you now. Maybe you should contact the nearest Toshiba service provider and ask for help. I think they can check the part number of this door - or maybe order one for you.

• Re: Need help for the restoration of the system

  Hi, I need help!

  I recently bought a Toshiba Satellite. I had some problems when trying to install some programs, some seem to fail. I wanted to clean the computer with system restore disc, only to find a record of 32-bit to a 64-bit computer.
  There is a repair of the setting system installed on the computer but it does not work, when I put it on disk, files, it cannot be opened.

  I can restore the system somehow repair; It must have been damaged by a virus. It should come with a big warning that the disk is not compatible!

  I have burned one day drive the first if I d just so you know! Any advice?

  Hello

  At first, I must say that you should tell us what model of laptop you have exactly.

  I put t know what cell phone you have and what you have with her, but in fact, it's that many laptops come with preinstalled OS 64-bit and 32-bit version on DVD.

  In this case, you must create own 64 bit preinstalled use Toshiba recovery media creator recovery DVDs. Alternatively, you can install 64-bit without DVD disk with HARD drive recovery option > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm
  Of course, this will not work if you didn't change the factory settings.
  Try if it will work for you.

  At the end I would say that what I wrote is detailed described in the document s user manuals but I presume that you didn t read it, right?

• Need help for reading in parallel on the same interface and writing XNET

  Hello. I need help to configure CAN interface to write and read from the same interface.

  I use NI PXI-8513/2. I use CAN1 as interface.

  My had TO send status messages CAN every 100ms. I have to read in order to return akntoowlege to keep DUT CAN interface happy and not make mistakes.

  So, I want to open Strim Session and readall frames in the loop. At the same time, I need to be able to write in a frame HAD at the time...

  I only need to read one picture at a time too, but since I know the ID, I can pull it from the stream.

  What I'm confusing all is how to put in place the same CAN1 interface to be able to write and read in parallel.

  I think I would get errors that interface is already in use.

  Since I'm new to CAN, I was read and write only when necessary. But, sometimes I was getting errors on my messages. Sometimes I get message, sometimes miss me. But, when I run CAN test criminal as sniffer he sends and written every time. I was told it's because it recognizes all messages.

  I opened to suggestions of how best to implement the interface.

  I guess I can use CAN2 and separator to work around this problem, but I would use an interface if possible.

  Thank you

  Hi Rus,

  The XNET hadrware takes care of most of the low level of detials for you. The reading and writing of the circuits are both connected to the bus at any time. When you write to the hardware it will try to put a frame on the bus at the first opportunity he can. If the frame loses arbitration material re - will attempt to send the frame up is successful. Reception equipment monitor activity on the bus, regardless of what it conveys. The material received will usually throw a framework that was sent by communication equipment, but there is an Echo property pass to circumvent this behavior too.

  Take a look at the example of the expedition: MAY-> NI - XNET-> Sessions-> multiple Sessions Intro-> CAN even exit entry framework Port unique Point.vi. Keep in mind that this example you will need to use a second CAN interface to recognize frames, it transmits. I would recoment against the example CAN output Frame Single Point which would mimic your ECU if you choose a type of cyclic frame running this example.

• I Iconia Tab A500, running 3.0, need help for upgrade by using a microsd card, got Acer download update

  I Iconia Tab A500 running 3.0, need help update, I downloaded the entire updaes list in the supprt of acer, all versions, 3.0, 3.1, 3.2 and 4., I read on the acer support somewhere I can use a microSD card to update my device, as acer provides automatically, when I try it says 'poor network connection '. moving instead of anthoer. ", I have to update all the updates that are listed, or can I only update, using the 4. 0? to get the last known update. I also downloaded, 'Documents, applications, drivers, patches and O.S... How do I intsaller all these updates, I think that running the lowest version available, please help me... Thank you in advance.

  There are some instructions step by step on the site, but basically you check out the file "update.zip" download, copy to the root of a FAT32 formatted microSD card, then start in recovery mode (press one of the volume buttons [which it depends if you are landscape or portrait mode] and hold, then the power press and hold). From there, you can choose to update in the zip file it finds on the map.

  It is important before you have the correct version of the update, it's different for different regions of the world, and you will not be able to upgrade the (for example) Brazil version from the US site.