Need help to share a hard drive in vista

Similar Questions

• Need help with a new hard drive in pavillion wiring elite M9400

  Hello fellow owners HP,.

  I recently bought a 1 TB hard drive for my Pavilion Elite M9400T.  I done my share of reading about installing to a new hard drive to another former post office and know how to physically install the disk in the slot, but my question starts with the wiring.

  I have a M9400T and saw the video of the installation here in this post.  I read to the bottom when he talks about the installation of additional hard disks into the empty Bay and had questions about the son in photo 5 on the photo below. I realized that I needed a Sata cable, so I bought one today, but I wonder if I can use other cables inside the case already for power. And who will be all I have to do to get this properly installed disc? I took pictures so that it would be easier for me to ask for help.

  

  

  A and B belong to my main hard drive and I want to know if I can use D (unused but looks like B) and a Sata cable bought my 2nd hard drive. I also noticed that B is related to C, which leads to the motherboard, so I didn't know if I needed to do the same for the 2nd drive.

  

  Connectors SATA 1 and 6 are taken by my hard drive and DVD drive (I think) cannot so I just put my 2nd hard drive on one of the remaining of the caps of 2-5?

  Thanks in advance for any and all tips and suggestions.

  BTW, I I was able to install the sticks of memory 2x2gb today without any problems for a total of 6 GB today but no matter what slots? I added the 2 slots of the fan and it seems to work very well.

  SO, Yes, you can use power connector would be ' for your new hard drive.  If you look closely at the image of a ' and follow the Red wire, it runs directly on the white molex (P4) beside the PSU connector.  He doesn't have to go to the motherboard.  Is not feed all the other components.

  Message edited by old_geekster on 11/13/2009 10:50

• DV7-7333 CL. : need help formatting has replaced hard drive in my laptop

  Greetings,

  I received instructions from HP another volunteer on a bad hard drive replacement. I replaced the hard drive with a new and need someoe to please guide me how to format my new drive hard back to the WIN 10 I had installed on the former. I also buy a 22 pin adapter usb to SATA.

  Another agent said that Windows 10 can be reinstalled on a new drive hard if your installation has been activated before. The activation servers Microsoft just know your computer and will be reactive. You must Access the media creation tool and have it make a bootable DVD player or you need a usb thumb drive at least 4 GB.

  I am in Germany but still do not know the language well enough and could not find a tool for creating Windows Media version in English free repacement.

  I don't know what to do to format my new hard drive... Please help!

  Thank you.

  Wes

  PROBLEM SOLVED (FINALLY)! I just wanted you to know that we have finally understood why the data on the computer with the media to WIN creation tool not was not download on thumb drive = Firewall! Not sure if everyone will have this problem but in collaboration with Windows agent, I happened to see a pop-up window saying something on the analysis of data not allowing not to download. It is therefore sometimes necessary to temporarily disable all firewalls and Web titles before starting the download.

  Follow the instructions of man Las Vegas thread above to create a bootable USB Thumb Drive to replace newly hard drive with OS Windows 10. HOWEVER, the following was not mentioned in his instructions, and not all computers can do this extra step so keep the following in mind if your USB key does not complete the upload.

  Again, to download data, I downloaded on the work computer, a USB key, I had to we need to temporarily disable all the security features on the work computer until you have completed the download of the WIN Media Creation Tool on the thumb drive process (this includes your private web anti-virus, we can use AND/OR the WIN Firewall and other security features available on the led computer. )

  I hope this helps those who have similar problems.

  Thanks again for all your help man Las Vegas thread!

  Kind regards

  Wes

• I need help to retrieve my hard drive using the recovery of Neosmart disk (it takes days)

  To get a better perspective, I'll tell you the history of what has gone wrong.

  What happened is that the computer has a virus and it changed some coding on the computer. When this happened to that my computer wouldn't let me enter my account and the only account that I could go on was the administrator account. I tried on a few websites and the other microsoft Web sites told me to do something with the command userinit or something like that, which led to the black screen of death that I managed to fix it on my own.

  Another website told me to use the recovery disk but like a lot of people that I don't have a recovery disk, I only had a reinstallation disk that said I could fix the computer, but it would delete all hard disk that I didn't, I need the intact files because they are important to my family.

  Then I discovered on the recovery disk that you can buy from Neosmart.com and this disc is made like the original Vista recovery disk. Anyway I bought it and I clicked on "Automatic repair" and it comes up with 2 dives eligible for recovery (it says at the top) a player is 10 GB and the other is 288 GB (it says active is the 288 GB we) I clicked on repair automated on one of them, but I don't remember. Apparently fixed it (coding I guess) and I restarted but no consideration was there. He says "Please wait" for a long time, then it comes up with a single account that says "User" I click it and it says user name and password you will need to connect to a computer at school or something. I put my username and password anyway and it does not of course and it comes up with "the specified domain does not exist or could not be contacted.

  So, I went back on the recovery disk and I so I click on system restore to get my stuff back and I can put it on a previous date until the virus has arrived and I click on it, then it is said that his recovery, files, but just like that, I let him recover and he was recovering for 3 days before I came on this site and tried something but it did not work. Like I said before it is 288 GB so I guessed it would take a long time to recover only the amount of data, but it seems just silly.

  Could someone please help me with this with words that I can identify the disk recovery Neosmart.com please

  Important additional information

  I said before that I don't remember what I have fixed drive, the thing is that there might be I have set the wrong drive, but to be honest at this point, I feel like if I do a movement without knowing what it will do, im going to lose what's on that hard drive

  Important files are not for work, they are files containing family photos of many years we couldn't print on paper of good quality printing. There is no other copy of these pictures and I really want to keep them, even with my parents.

  The recovery of Neosmart disk contains the following options

  • Auto repair
  • Score editor
  • Browse/Backup of files
  • Internet browser
  • Launch the command line

  Within the Automated repair is where you can get the system restore. The others you can kind of guess, if you want to know so just ask.

  Help, please

  Thank you

  To recover the photos, you can remove the drive and it slave on another computer (you can get very cheap external envelopes) and remove your data (you have just learned an important lesson in why you need to have backups).

  Once you have saved your data, your best bet would probably be to reinstall. A good Web site for the removal of malicious software is that one.
  http://www.selectrealsecurity.com/malware-removal-Guide/

  Good luck!

• Need help to choose a hard drive of my iMac desktop backup

  need a recommendation for at least a desktop hard drive 3 TB to use with Time Machine.  with Thunderbolt 2 or 3 USB my iMac is 10.10.5 Core i5, 16 GB of memory. In view of the Weston Digital my passport Pro 4 TB or LaCie2 6 to

  There are many choices, and they are all good for use with Time Machine or may even come with their own such as My Passport templates backup software. You will also find very competitive prices on amazon.com.

  If you plan to use Time Machine, so be sure that your backup disk is 2 or 3 times more capacity than the drive on your computer. Time Machine can use the space quickly.

  Time Machine deletes the old files if they have been deleted from the source when he needs space on the backup to a new incremental backup drive. Time Machine "Jules Destrooper" its backups. over 24 hours, old backups, except the first of the day; These "dailies", old more 30-day backups, except the first day of the week. The weeklies are kept as long as there is room.

  How long a backup rest file depends on how long it was on your Mac before you deleted, assuming that you do at least one backup per day. If she was there for less than 24 hours, it will be maintained for at least a month. If she was there at least a week, it will be maintained as long as there is room. By default, Time Machine backs up every hour. This can not be changed in Time Machine. There are third-party utilities that will modify the as Editor of Time Machinebackup interval.

  Time Capsule sparsebundle grows in size as needed, but not descended. So, from the point of view of the user of the time Capsule, it seems that no space was released, although there may be space in the sparsebundle.

  Once Time Machine finds he can't free up enough space for new backup it reports the disk is full. You can erase the backup disk and start over or get a larger drive.

• Need help to remove the hard drive from a Satellite Pro M10

  Hi, a good will would point me in the right direction. I am trying to remove the HD from a satellite pro M10.
  I discovered the net without success.

  A diagram with being usefully etc.

  kind regards J

  Hello

  I can't give you a diagram or something, but I can give an indication to take a look on the front left side of your machine. On this corner of the left side under the volume control is a small blanket where the HARD drive is in. You need only to unscrew the 2 screws that are accessible when you turn on your machine and and look at the bottom of your machine. Do you know what I mean?

  When you remove these 2 screws, you need to remove the HARD drive by taking some screwdriver flat-blade and paste between the disc cover and HARD case. Then carefully remove the cover of the HARD drive and you can recover the HARD drive with the cover and exchange it.

  Voila, your hard drive West. It s is not difficult at all.

  But if you still have some questions then request.

  Welcome them

• Need help in choosing external hard drive encryption tool (Windows Bitlocker)

  Hello friends,

  I have an external hard drive (model capacity - STBU1000303, - 1 TB Seagate) and I'm looking for a disk security tool so I can encrypt my external drive and protect the password.

  I found a tool Microsoft Bitlocker, so please suggest can make the backup encryption and password for this external hard drive? Or should I try another third party tool?

  Thanks in advance!

  Hello friends,

  I have an external hard drive (model capacity - STBU1000303, - 1 TB Seagate) and I'm looking for a disk security tool so I can encrypt my external drive and protect the password.

  I found a tool Microsoft Bitlocker, so please suggest can make the backup encryption and password for this external hard drive? Or should I try another third party tool?

  Thanks in advance!

  See the following link.

  Getting started with BitLocker Drive Encryption:

  http://TechNet.Microsoft.com/en-us/library/dd875544 (v = WS.10) .aspx

  "You can use BitLocker to encrypt fixed data (such as internal hard drives) drives and removable data (such as USB and external hard drives, flash drives) drives. To encrypt a data drive, it must be formatted by using the FAT, FAT16, FAT32, or NTFS file system and must be at least 64 MB in size. »

  Use the menu on the left side of this page to view other items all the information on the use of Bitlocker.

  Concerning

• Reinstallation of Windows 7 download needed after the replacement of hard drive and Vista restore

  I replaced a hard drive crashed and restored the original Vista 32bits.  I have the product key for the upgrade of Windows 7 that I bought a year or two ago.  I now need to find the download for my relocation (without paying again).  Where should I go for the download?

  I replaced a hard drive crashed and restored the original Vista 32bits.  I have the product key for the upgrade of Windows 7 that I bought a year or two ago.  I now need to find the download for my relocation (without paying again).  Where should I go for the download?

  If you purchased Windows from the Microsoft Store, you can log on to your account and select the correct level of bit for download, then download.

  http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102

  How to order the replacement drive:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/replacement-CD/fb8230d4-000F-4ee7-b732-c9f8fff28bfd

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• I need to reinstall Adobe Acrobat 11.0 I bought in 2014. I lost my hard drive and need to install the new hard drive.  No idea what I'm doing!  Thank you!

  I need to reinstall Adobe Acrobat 11.0 I bought in 2014. I lost my hard drive and need to install the new hard drive.  No idea what I'm doing!  Thank you!

  http://trials2.adobe.com/AdobeProducts/Acro/11/Win32/AcrobatStd_11_Web_WWMUI.exe

  This is the file I download - but when I go to the Setup process, I bought for the installation program Adobe Acrocat Pro XI (11.0.07).  When I insert my serial number, he wanders as invalid.  I am running Win 7 Pro.  It worked fine on my old hard drive.   I think I maybe win64.  Does it matter?

• I don't see the entire hard drive under Vista. When I try to shrink a volume, I seem to lose space.

  Original title: I see all the hard drive under Vista

  I see on the C drive properties
  "space used = 143 GB ', and"
  "494GB of free space.   But, when I try to do a third partition to install windows 7, using the disk management tool, after I click on
  shrink the volume on drive c, I don't see that: ' available shrink space: 79, 917 MB ' and I also see 'total size after shrink in MB = 573891'.  I expect all the free space 494 GB available shrink.  I'm wrong.    Why all the 494GBs are not available to reduce or at least half of it, I guess that instead of only available to shrink 79Gs!
  In addition, currently, I have three partitions.  For vista, office and other programs and data, C D like Factory Image of HP, a 11.3 GB and yesterday I made a partition for windows 7 with 48.83GBs and installed windows 7 Professional there.  Then I realize, I need more space to install office and other programs and data.  This is when I tried to shrink the c drive and encountered this problem.
  Can you please help me
  Thank you

  Hello

  you do not shrink the C: drive and then expand the E: drive back in the space that you did

  You cannot extend a drive backward

  and I gave you a link to read and use on the problems of shrinkage

  If as a result of the information on how vista disk management work does not fit what you want to do, you may need to buy 3rd party partition software

• My users will not be displayed when I slave my hard drive with Vista on a computer running Windows 7.

  How can I solve this problem and have my admin and my user appear in the directory?  My hard drive went out on me on my other computer, so I tried to slaves in the top of the tower.  All other folders appear in my directory, but not users.  There are default user on this subject.  Can I use a data recovery software, but it will take a day and a half to get the files.  I ran the program of restoration of data for a few hours and it has recovered some of the pictures I want.  So I try to see if I'm doing something wrong, before investing in the recovery of the entire file.  Thank you.

  Steve

  Hello

  see this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/hard-drive-with-Vista-installation-not-showing-up/8c810028-96c2-4d89-B918-a2a6712aa315

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-files/help-cant-see-all-the-files-from-my-old-hard-drive/bd3a9873-d871-4ef6-8b55-50292e7e0105

  I hope this helps.

• Satellite X 200-15 k - how can I activate the advanced buffer HARD drive under vista?

  How can I turn on buffer advanced performance HARD drive under vista? This option is not available for this drive?

  * Check this box: *.

  1. right click on the computer in the Start Menu, then select Options.
  2. click on advanced on the left system settings.
  3 select the Hardware tab in the System Properties window.
  4. click on the Device Manager button.
  5 expand disk drives.
  6 right-click on a hard drive under disk drives, and then select Properties.
  7. Select the policies tab in the Properties window for the device.
  8. check Enable advanced performance.
  9. click OK to save the changes and reboot your computer.

  If this is not possible then the buffer of advanced performance is not possible with this HARD drive.

  Hey Buddy

• With the help of Windows Easy Transfer - need to transfer the old HARD drive to new computer - old HDD attached as external drive for the new usb port of the computer - help

  New computer installed Windows 7 and gave me an option to use Windows easy transfer to transfer files, data, programs, etc. from my old computer.  All I have from the old computer's hard drive; a lightning strike fried either food or his mother by car.  I have attached the hard as a disk to the new computer using the usb cable provided with the external hard drive case.  It is recognized as drive E: on the new computer.

  Trying to follow the instructions given by the Windows Easy Transfer software.  Get the software/folder from the old hard drive (drive E), but trying to run the software that I can't seem to do anything on the old disk.  When asked what is the former or the new computer - I respond to old, but no new file is created for the transfer.  When I answer again, a new file is created on the new computer (rather than the old HDD) and then he transferred again to new.  I can't create a file of whatever it is I want to transfer from the old HDD.

  I can't use an easy transfer cable because the old computer does not only the hard drive.  I can't connect to a network for the same reason.  I only have the hard that I can attach to the new computer.  But I can't get the new computer to process the old hard drive separately for transfer purposes.  The only other option I can think of is to attach the old HDD to another computer, and then try to run the software in this way, but I don't want just the stuff on the old hard drive a copy to the other computer.

  Can anyone help?  Suggest how to get the old hard drive files, data, transferred etc. to the new computer.  What are the steps?

  Thank you.

  Do yourself a favor, with the old drive connected externally, in the browser, simply copy the data files to the location of Documents of the PC win7. You can not copy programs, they need to be reinstalled from media origonal. You can copy all the downloaded files instalation

  You may need to take possession of your old documents folders - see win help to find out how

• Re: Need to format an internal hard drive in FAT32, how?

  OK, this is no playstation forum but bear with me.

  I bought a new samsung 1 TB drive HARD internal to my playstation 3 but it can't recognize him, probably because it is not formatted in FAT32. I need to format this drive. I tried to put in an old laptop and do it, but the connections are different. I put in my Satellite A500-12W and thought using an old windows XP cd and find a 'format' instead of the installation option. However, the computer would not boot from the CD with the new drive in. I got the error message:

  "PXE - E61: media test failure, check cable for.
  "PXE - MOF: exit Pxe rom.

  The drive is new and should not be defective. I had created satellite before recovery discs so I put the number 1 and then I reached the installation process, but it seemed that I had no choice but to install all of the thing which is 4 DVD and when I did it before that I remember it being a working day (formatting often is with all OK that must be pressed) and I work a lot these days , I would like to avoid making a complete installation just to be able to felete it again and format it to FAT32. Since we are talking about the internal drive I can't do it just Windows because there is no windows on it...

  The user manual has nothing useful to contribute, I looked through the installer looking for a 'format' option but does.

  Can someone help me? For example can I enter in MS-DOS without an OS istalled and do it from there? What I want is a FAT32 HDD is empty...

  If possible, connect the new HARD drive to a computer as a external HARD drive and try to change it to FAT 32.
  PartitionMagic application of best and powerful enough to do this.

  Googling around you will find NTFS to FAT32 converter. Something like Aomei NTFS to FAT32 Converter. Check it out.

• need a laptop keyboard and hard drive HP product number

  Hi all!!!

  My laptop keyboard and hard drive does not properly and I need to replace the two points. but I do not know the exact number of the product of the keyboard and the disk hard drive.  A knowledge of the product number please help me.

  Product model: HP Pavilion g6 - 1011TU Notebook

  Product number: LQ893PA

  Thank you

  Migas

  You will find figures for the product here in the service of maintenance & guide for the laptop G6.  As far the hard drive will I highly recommend that you use SATA instead of SATA2 or SATA3 for the best compatibility with the interface of disk on the system board controller.