Need help with corrections of order import

Similar Questions

• need help with correction QVC to duplication on regular basis

  Hello
  
  I use Oracle 10.2.0.4 on Win 2008 R2. We have Archive mode and no catalog rman is used. I have a requirement where I have to reproduce prod weaned on a regular basis to the development server.
  I created the batch a few files so that the entire process automatically. Stored all the scripts in Directory of c:\script\clone\. +.
  
  I took the backup copy of the password and spfile Server prod and copied on the development at the same server.
  
  Here are the scripts that I have performed in the order:
  
  * 1_clone.bat*
  
  Set ORACLE_SID = orcl
  sqlplus / as sysdba @c:\script\clone\2_test.bat
  
  
  * 2_test.bat*
  
  immediate stop
  startup nomount
  rman target sys/oracle@live nocatalog auxiliary host / @c:\script\clone\3_rman.rcv
  
  
  * 3_rman. RRS *.
  Run {}
  allot of drive type d1 track auxiliary;
  double-target database ORCL NOFILENAMECHECK;
  }
  output
  
  
  When the duplication process in about in the end, I get error below:
  
  content of script memory:
  {
  clone of judgment;
  startup nomount clone;
  }
  execution of Script memory
  RMAN-03002: failure of dual DB at 31/07/2012 08:02:21
  RMAN-03015: an error has occurred in the memory stored script script
  RMAN-06136: the auxiliary database Oracle error: ORA-01013: user has requested the cancellation of the current operation
  
  Complete recovery manager
  
  SQL >
  
  
  When I press exit, this window closes and I can run the alter database open resetlogs; -command with a new sql command prompt. I check online and some suggest that there could be a window with system user. Please suggest changes in the script.
  
  Best regards

  Hello;

  Have another session with the user of the system will cause rman raise this error. For example another session is used to start the database in nomount is always active mode.

  During the cloning process the rman session must be exclusively connected to the instance auxiliary (no other sessions are allowed).

  Double post

  request for assistance with rman cloning script

  Best regards

  mseberg

  Published by: mseberg on July 31, 2012 05:02

• Need help with this gallery of xml!

  I have build a gallery but its very simple... There are pictures of the xml file.

  I have attached all the zip files.

  I just want two things if anyone can help.

  first of all when I press the next button, he's going to the next image, but without effect. It just displays the following image... I want to incorporate the effect of dragging when the image is changed to another.

  and secondly, I want to use the AutoPlay feature.

  Once swf starts images came one by one with a vertical drop of a few seconds.

  Thanks in advance... I really need help with this..!

  For the look of sliding effect using the actionscript class Tween.  Allows you to create motion tweens using the code.  The example below will be tween property _x of the instance named anObject from 0 to 300 in 3 seconds...

  import classes before using

  Import mx.transitions.Tween;
  Import mx.transitions.easing.Regular;

  TW var = new Tween (anObject, "_x", Regular.easeIn, 0, 300, 3, true);

  To implement an enforcement function auto you need to import all the images first, in the order, then you will need to use form any controlled timer, such as setInterval (with clearInterval not to need) in order to have things turn on automatically by some part-time

• Need help with the port forwarding for a XBox remote Streaming

  I have a router R6200v2 and need help with port forwarding.

  I came across this set of instructions for setting up stream port forwarding XBox remotely from anywhere

  http://kinkeadtech.com/2015/07/how-to-stream-Xbox-one-to-Windows-10-from-anywhere-with-Internet/

  I have no idea when it comes to such things and I want to make sure I do it correctly without messing up my existing home network.

  Port Forwarding and triggering Port pages setup look very different from what the guy uses. Can someone walk me through what I do to set up please?

  Hi @varxtis,

  You must enter them in the field for a start external Port and external completion Port. You will need to send individually except for the range of 49000-65000. The steps are as follows.

  1. create a Service name (it could be something else that you cannot use the same service name twice. Ex. XBOX1, XBOX2 and so forth.)

  2. Select the type of service (TCP, UDP or both)

  3 entry 5050 times a start external Port and external endpoints.

  4. Select the IP address of your XBOX.

  5. Select apply.

  6 do the same for other port numbers. To the beach, use 49000 for the external departure Port and for the external completion Port 65000.

  Kind regards

  Dexter

  The community team

• Need help with network home using Airport extreme

  I need help with my home network.  I'm not very aware when it comes to all things network.  Here's how my network is currently set up.

  Cable modem to Airport Extreme for Gigabit Switch.  Cables come out of the switch to all areas of the House.  I have 2 other extreme airport connected in other rooms of the House directly on the wall that dates back to the switch.  I hope I am explaining that properly.

  My problem is that this seems to have caused some of my connections cable does not work.  When everything is configured, it has worked well.  All connections in the House worked.  Then we have disconnected one of the extreme airport and moved to another location in the House to have the best wifi coverage.  Since that time, a lot of the ethernet wall plugs are not working.  For example, when I plug in my Macbook Pro in making ethernet in my kitchen, it says connected but it has an assigned ip address and cannot connect to the internet.

  Any help you can provide would be great.

  I would like to get the return tech to help you to...

  But it is likely that something (or someone) has tampered with the settings.

  The layout is fine... but you can cause problems with the network by creating a loop.

  This can happen because the AE you moved is connected wrongly... somewhere in the network it is connected to the switch again.

  Or AE is set to expand wireless... It's FAKE... It will loop the network on the back main EI wireless.

  Unplug the two AE you have that function as extensions...

  Turning off everything else... then it works again...

  Do it in this order.

  Modem... Wait 2 min

  AE... Wait 2 min

  Switch.

  Now check that the network is working properly... power of customers in various locations and make sure everything is good.

  If so, then manually reset the two AE of factory and redo their installation.

• I have a mess of error. about microsoft Isatap adapter... plug and play id root\ * Isatap\0002 error tv-configmgrerr31 need help with drivers

  need help with this.is there a link for the drivers. The only changes to my system is a new modom.netgear wireless g54.thank you

  Hello

  (1) what is the complete error message you receive?

  (2) when exactly you get this error message?

  (3) how long have you been faced with this problem?

  You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.

  See the article below

  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/kb/932520

• Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI".

  Hello

  Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI". Y at - it solution or another method?

  Hi ErikLee,

  Do you have MS Outlook installed on your computer?

  Windows mail import and export opportunities are limited to an Outlook .pst file or an Exchange Server mailbox. They are available only if MS Outlook is installed.
  If MS Outlook is not installed and you start an import or export action, the necessary support files are not present for Windows mail complete the operation. Then I suggest you to install Outlook temporarily and see if the problem is resolved.

  Follow the instructions below and check if the problem is resolved.

  1. reboot your computer, and then start Windows Mail.
  2. on the Tools menu, click Options.
  3. in the connection tab, click on edit to open the Internet Properties dialog box.
  4. in the tab programs, click on an application other than Windows mail e-mail in the e-mail list. Click on apply and then click OK.
  5. click OK again to close the Options dialog box.
  6. exit Windows mail and restart Windows mail.

  If this does not work, I suggest you upgrade to Windows Live Mail to import or export messages that may help you resolve the issue.

  To download Windows Live Mail, visit the following Microsoft Web site:
  http://get.live.com/wlmail/overview

  For more information about Windows Live Mail, see the Microsoft Web site at the following address:
  http://windowshelp.Microsoft.com/Windows/en-us/help/4b30d3d6-abe2-46d1-a5fd-4a1ba786a1381033.mspx

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  I don't know why vista windows no longer charge, or when the files and folders disappeared

  How Windows Defender is on this problem?

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Need help with a Hp Papvilion Dv7-1270US, from vista to xp 64

  Well, I noticed that a lot of guys are useful here with installing XP on Vista and yes I'm another unhappy Vista user, I am a graphic designer and let me tell you programs and performance is not very good on my laptop HP that I am ready to go back to XP.

  I have an extra HD a seagate sata 80 GB of my PS3 that I drag never used, so I'll use it to install XP on my laptop

  Its what I need help with drivers, man what a pain. I can install drivers left and right that I know how to do this, but Nlite, manual, unzip its so confusing...

  good so I use Nlite to wake my sata drivers and my installation of Windows XP on my HP I would add something in there like {video card driver} {driver Chipset} etc, what should I put in the wake? and once the wake is done and winxp is installed in what order should I start to install stuff, please guys Im confused and need help if someone can point me in the right direction of the dv7-1270 drivers I would appreciate...

  If I happen to screw up my 80 GB hard drive, not a big deal, blue screen, can not load, etc etc... can I just put my original 320 GB hard drive and back to Vista the way it was. ??? is it possible, which would ease my mind, thank you for your responses and assistance.

  Drivers:

  Chipset Intel, (install and reboot before other drivers) here

  Intel Matrix Storage Manager here

  MS-UAA fo SP2 (required with a reboot before the graphic and Audio driver) here

  MS-UAA fo SP3 (required with a reboot before the graphic and Audio driver) here

  NVIDIA GeForce 9600GT here

   

  Intel Wireless 5100 here

  Bluetooth here

  Realtek RTL8168C Family PCI - E Fast Ethernet NIC here

  Please check first that link written by Joshua Wood and concentrate on problems that may appear when you install the sound card in it.

  IDT High-Definition Audio CODEC Pilot,

  1 sp41693, pilot, work reported in XP here view

  2 SP39671, driver, jobs reported in XP here or here view

  3 sp41698, vista, work reported in here XP driver

  High-Definition Audio (HDA) Modem Installer and driver here

  .NET framework (required before HP Quick Lunch Buttons) here

  HP Quick Launch buttons here

  Synaptic Touchpad here S

  ENE CIR (infrared receiver) here (your Vista driver)

  JMB38X card reader Host Controller Driver here

  HP 3D DriveGuard 1.10 has here

  If you had for 7 unknown devices (buttons drivers), here

  Do a manual installation

  Go to Device Manager, right click on the unknown device,

  Choose update driver, not to communicate.

  Choose the install from a list or a specific location, not search, have-disk,

  Navigate to the location of machine.inf.

  Do it for the rest of the unknown devices

• Need help with configuration on cisco vpn client settings 1941

  Hey all,.

  I just bought a new router 1941 SRI and need help with the configuration of the parameters of the VPN client. Orders aspect a little different here, as I'm used to the configuration of ASA and PIX for vpn, routers not...

  If anyone can help with orders?

  I need the installation:

  user names, authentication group etc.

  Thank you!

  Take a peek inside has the below examples of config - everything you need: -.

  http://www.Cisco.com/en/us/products/ps5854/prod_configuration_examples_list.html

  HTH >

  Andrew.

• Need help with screen Blus of death (BSOD) on my computer toshiba laptop

  Hello all, Ive had a little last week, or problems with my laptop. While playing a game (minecraft), I would randomly have a BSOD error and my laptop will re-start. Initially, I gave it no thought, but when it happened again, I decided to try to do a little research, but I'm not terrible with technology and other then I'm neither the case with my own research.

  If someone could point me in the direction of a few possible ways to get this problem.

  guys do you propose I make to the store and see if they can check it out, what would I need if I did.

  I got a program to read some sort of file "dump" made when occurs a BSOD, I publish what this program here says? the program is BlueScreenView, if yes, what I have post the spectator thing? There are has 2 main screens on it, SDO as Sho different dump files (which is on the top) and on the bottom, it lists the names of different files for each dump file I think that some of them highlighted.

  im not this product with tech so I don't know much but I need to post anything on my laptop or any information of the dumpfile and would have this info help in any way to determine the problem? just tell me what I have to post and ill get the information displayed in a response, thank you.

  -leoknighted

  PS: I don't think that playing minecraft is the cause of the BSOD and crashing, but I only get it when playing minecraft, so I don't know if minecraft is causing accidents and others. I watch videos and this all the time and I never have an accident. I'll try and play a different game and see if this causes my laptop down and the cause is perhaps high usuage to my laptop, as I've said games require a lot of power of a laptop/computer, if they are not the 'best' laptop for games. but yh, if someone thinks they can help me and need some information please tell me so I can get it for you. If you guys think it would be best to get a professional to look just mylaptop say, however im save as a last resort.

  Hello

  I suggest you to refer to this article to check if this help.

   

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

   

  Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

   

  Custom installation WARNING: If you format the hard disk during the installation, the data files are saved in a Windows.old folder on the partition you installed Windows 7.  However, you should always back up the files. If you have encrypted data files, you may not be able to access them after installing Windows 7. If you have backed up your data files and then restored after Windows 7 is installed, you can delete the Windows.old folder.

  Let us know if you need help with this question, we will be happy to offer you our help.

• Need help with the IP configuration on vm ware for the installation of 11 GR 2 on linux vmware 6 on win7

  Need help with the ip configuration on/etc/hosts for the installation of 11 GR 2 on linux vmware 6 on win7.

  Let me know if you need more info... in fact I have a setting error while installation said

  -(/ etc/hosts has no correct entry for the host name)

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Thank you...

  (host computer)

  Win7 64 bit

  (vmware)

  Oracle Linux Server 6.3 version

  Release of Red Hat Enterprise Linux Server 6.3 (Santiago)

  Oracle Linux Server 6.3 version

  -(/ etc/hosts has no correct entry for the host name)

  Then post your/etc/hosts.

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Why 85? have you tried 192.168.1.100?

• Need help with a query result

  Oracle Version: 11.2.0.2.0

  I need assistance with the output of the query. Here is the table.

  With Tbl_Nm as

  (

  Select 'ABC1' SYSTEM_ID, REGION 'US', 'CHI' SUB_REGION 4000 BALANCE, to_date('1-JUN-2012 10:45:00 am', 'dd-mon-yyyy hh:mi:ss am') LAST_UPD_TIME, 'A' FLAG of union double all the

  Select 'PQR2', 'UK', 'LN', 2000, To_Date('1-JUL-2012 10:46:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' starting from dual Union All

  Select 'ABC1', 'IND","MAMA", 3500, To_Date('1-AUG-2012 11:47:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select "LMN3", "US", "NJ", 2500, To_Date('1-SEP-2012 09:49:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select "PQR2", "UK", "MC", 2600, To_Date('1-OCT-2012 04:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select 'ABC1', 'US', 'NY', 3200, To_Date('1-OCT-2012 06:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' starting from dual Union All

  Select "LMN3", "UK", "BT", 2400, To_Date('1-NOV-2012 07:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' From Dual

  )

  Select * from tbl_nm

  I need the output below.

  PQR2 UK MC 2600 1 OCTOBER 2012 04:45

  ABC1 US NY 3500 October 1, 2012 06:45

  LMN3 UK BT 2500 November 1, 2012 07:45

  The need the disc according to this system_id flagged as "A". But if the last disc of 'd' then it must show that the amount, but the file should be displayed in 'A '.

  I've tried a few and got stuck. Help, please. Not able to get a balance '.

  This question is a bit similar to needing help with a query result

  With Tbl_Nm as

  (

  Select 'ABC1' System_Id, region 'US', 'CHI' Sub_Region, 4000 balance, To_Date('1-JUN-2012 10:45:00 am', 'dd-mon-yyyy hh:mi:ss am') Last_Upd_Time, 'A' flag of double Union All

  Select 'PQR2', 'UK', 'LN', 2000, To_Date('1-JUL-2012 10:46:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' starting from dual Union All

  Select 'ABC1', 'IND","MAMA", 3500, To_Date('1-AUG-2012 11:47:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select "LMN3", "US", "NJ", 2500, To_Date('1-SEP-2012 09:49:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select "PQR2", "UK", "MC", 2600, To_Date('1-OCT-2012 04:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select 'ABC1', 'US', 'NY', 3200, To_Date('1-OCT-2012 06:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' starting from dual Union All

  Select "LMN3", "UK", "BT", 2400, To_Date('1-NOV-2012 07:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' From Dual

  )

  Select System_Id, region, Sub_Region, Balance, Last_Upd_Time of Tbl_Nm T1

  where t1. Last_Upd_Time = (select max (Last_Upd_Time) in the Tbl_Nm T2 where T1.) SYSTEM_ID = T2. SYSTEM_ID)

  So maybe you'd then

  ORDER BY DECODE(flag,'D',9,1) ASC...

  to get the Ds at the end of the list.

  or

  ORDER BY CASE WHAT flag = has ' (your other filters) AND then 9 or 1 end CSA,...

  HTH

• Hello all, I need help with creating a dynamic region in jdeveloper 11.1.2.3 version

  . Hello everyone, I need help with creating a dynamic region in jdeveloper 11.1.2.3 version

  What JDK you are using?

  You are probably using an old version of the JDK, that class while compiled under JDK 1.7.0

  http://java67.blogspot.com/2012/10/how-to-fix-javalangunsupportedclassversionerror-major-minor-version-49-50-51.html

  For example, work with the correct version, and it will be fine...

• Need help with a SQL query

  Hello

  I have a data in table (raj_table) with columns (char11) raj_id, raj_number (varchar2 (15)), raj_format (NUMBER), Primary_ID (identity with the values of the primary key column)

  Primary_ID raj_id Raj_number Raj_format

  1                            raj                 rajvend                      1

  2                            raj                 rajvend                      1

  3                            raj                 rajvendor1                 2

  4                            raj                 rajvendor1                 2

  5                            raj                 rajvendor1                 2

  6                            raj                 rajvendor2                 3

  I used under SQL to get query output as below, but has not achieved the required result:

  Select client_id vendor_number, vendor_format, primary_id, row_number() on sl_no (client_id partition, primary_id, vendor_format order of client_id primary_id, vendor_format, vendor_number, vendor_number)

  from raj_table by sl_no asc

  SL_NO raj_id raj_number raj_format primary_id

  1                   1                   raj              rajvendor                 1

  1                   2                  raj              rajvendor                 1

  2                   3                   raj              rajvendor1                2

  2                   4                   raj              rajvendor1                2

  2                   5                  raj               rajvendor1                2

  3                   6                    raj              rajvendor2                3

  I need help with a SQL query to get the result as above without using the group by clause. I want to bring together the combination of separate line of the three columns (raj_id, raj_number, raj_format) and add a unique serial number for each online game (SL_NO column below). So, above there are 3 unique set of (raj_id, raj_number, raj_format) I can get in a group by clause, but I can not add prmiary_id, SL_NO values if I group by clause. I used the analytical functions like row_number() but no luck. Need solution for this.

  with t as)

  Select 'raj' raj_id, 'rajvend' raj_number, 1 raj_format, 1 primary_id Union double all the

  Select option 2, 'raj', 'rajvend', 1 double Union all

  Select 3, 'raj', 'rajvendor1', 2 double Union all

  Select 4, 'raj', 'rajvendor1', 2 double Union all

  Select 5, 'raj', 'rajvendor1', 2 double Union all

  Select 6, 'raj', 'rajvendor2', 3 double

  )

  Select dense_rank() over (order of raj_id, raj_number, raj_format) sl_no,

  t.*

  t

  order by primary_id

  /

  PRIMARY_ID RAJ RAJ_NUMBER RAJ_FORMAT SL_NO
  ---------- ---------- --- ---------- ----------
  1 1 raj rajvend 1
  1 2 raj rajvend 1
  2 3 raj rajvendor1 2
  2 4 raj rajvendor1 2
  2 5 raj rajvendor1 2
  3 6 raj rajvendor2 3

  6 selected lines.

  SQL >

  SY.