need help with working capital

Similar Questions

• Need help with work flow problem: a single e-mail notification non-stop.

  Hello
  
  We have created an approval Workflow custom PO based on the standard PO approval workflow and we had it for awhile now. Last week, we had a problem where the notification keeps on sending e-mail to suppliers and buyers. We discovered that the notification_id given in table WF_NOTIFICATIONS keeps having updated by the minute affecting the MAIL_STATUS Invalid then SENT back, then back to INVALID again and so on. We think that what is updated in this table is the cause, but so far we have not found what is updated. Here are a few of our instance.
  
  Oracle Applications: 11.5.10.2
  Database: 10.2.0.4 64bits
  OPERATING SYSTEM: AIX
  Custom workflow based on the 115.127.11510.16 review
  
  Customizations:
  -Created in custom notification that xx_email_po_pdf_supp based on EMAIL_PO_PDF_SUPP.
  -Creation of custom message XX_EMAIL_PO_PDF based on EMAIL_PO_PDF.
  -Added #WFM_CC to XX_EMAIL_PO_PDF.
  -Creating custom attribute XX_PO_WF_EMAIL_PERFORMER and set as an interpreter to the XX_EMAIL_PO_PDF_SUPP notification.
  -Created the custom XX_ADDTL_STARTUP_VAL function right after "Set Workflow start values of service." This function sets the #WFM_CC attribute and the XX_PO_WF_EMAIL_PERFORMER attribute.
  
  Not sure if the customizations have nothing to do with the question since not all POs have this problem. Anyone have this experience? Appreciate help with this.
  
  Thank you
  Allen

  Just to review this thread, can help you
  Workflow Notification Mailer is Spamming accounts of e-mail users [1293792.1 ID]
  Thank you

• Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

  Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

  Hello

  The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

  http://support.HP.com/us-en/document/c01700855

  Kind regards

  DP - K

• I need help with an installation failure to interpret and troubleshoot a Setup log.

  Background: A few years ago, many editors of cinema used Final Cut Pro 6 (also contained in Final Cut Studio 2) for their editing projects.  Shared Apple Final Cut X uses a different format that is not compatible with FCP6.  Sometimes, these editors are called to work on a few historical projects that have been published in FCP6 and need this version to run now.

  Starting with OS X Lion, FCP6 would install not in Lion and thereafter.

  According research by Jeremy Johnston as noted on his blog, he discovered that Apple has inserted a file in the folder CoreServices in the Library folder of the system folder that causes versions the version Final Cut Pro X (and other older Apple programs in the same situation) do not settle.  He suggested changes to this file that would seek to prevent interfering with the installation of FCP6 in Lion, many users of final cut PRO 6 were successful in their efforts to install in Lion and work with it.

  Later in a discussion update on installing FCP6 in Mavericks, HawaiianHippie determined that the simplest way to perform the installation of FCP6 was simply copy this file and remove it from the system folder, install FCP6 and then restore the copied file:

  https://discussions.Apple.com/message/26309669#26309669

  I used this method with success to install FCS2 in Yosemite:

  

  [click on images to enlarge]

  However, in my attempts to install FCS2 in El Capitan, it fails in the last 5% to install the first DVD:

  

  

  First of all, I need advice on how to display an extremely large Setup log in this thread (on MacRumors, it is a method to insert a 'code' in a small box that can be the object of a scrollbar if necessary to read all along).  I am unable to find such a method to post here.

  Then once approved, I need help to determine which component is causing the installation to fail and perhaps this element can be omitted from the installation:

  

  If this element is not required, then maybe FCP6 can be installed successfully without it.  And if that omitted element is necessary, perhaps a manual method to install it can be determined by pacifists.

  It is my goal to help those who need to install and use FCP6 on their new Macs running El Capitan.

  Here is the post on MacRumors with pre-installed Setup log:

  http://forums.MacRumors.com/threads/i-need-help-with-an-installation-failure-to-interpret-and-troubleshoot-an-Installer-log.1954786/#post-22541389

• Need help with network home using Airport extreme

  I need help with my home network.  I'm not very aware when it comes to all things network.  Here's how my network is currently set up.

  Cable modem to Airport Extreme for Gigabit Switch.  Cables come out of the switch to all areas of the House.  I have 2 other extreme airport connected in other rooms of the House directly on the wall that dates back to the switch.  I hope I am explaining that properly.

  My problem is that this seems to have caused some of my connections cable does not work.  When everything is configured, it has worked well.  All connections in the House worked.  Then we have disconnected one of the extreme airport and moved to another location in the House to have the best wifi coverage.  Since that time, a lot of the ethernet wall plugs are not working.  For example, when I plug in my Macbook Pro in making ethernet in my kitchen, it says connected but it has an assigned ip address and cannot connect to the internet.

  Any help you can provide would be great.

  I would like to get the return tech to help you to...

  But it is likely that something (or someone) has tampered with the settings.

  The layout is fine... but you can cause problems with the network by creating a loop.

  This can happen because the AE you moved is connected wrongly... somewhere in the network it is connected to the switch again.

  Or AE is set to expand wireless... It's FAKE... It will loop the network on the back main EI wireless.

  Unplug the two AE you have that function as extensions...

  Turning off everything else... then it works again...

  Do it in this order.

  Modem... Wait 2 min

  AE... Wait 2 min

  Switch.

  Now check that the network is working properly... power of customers in various locations and make sure everything is good.

  If so, then manually reset the two AE of factory and redo their installation.

• Need help with the launching track pack for forza code 4

  Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.
  
  This is the help I get when the cat to an Ambassador xbox on xbox.com
  
  Terry wrote:
  Need help with the launching track pack for forza code 4
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
  The Xbox Ambassador says:
  Hello
  Terry wrote:
  Hello
  The Xbox Ambassador says:
  Hey
  Terry wrote:
  just to be on the phone to xbox live support and was told to come here
  The Xbox Ambassador says:
  ok\
  The Xbox Ambassador says:
  What is your problem?
  Terry wrote:
  I bought the 4 for forza ansd 360 new sealed Christmas...
  Terry wrote:
  has got 2 codes that accompanies the game but the pack track code does not work
  The Xbox Ambassador says:
  Wow good
  Terry wrote:
  whenever I put in the code it says code redeemed
  The Xbox Ambassador says:
  I think the code is used. You must return to the retailer
  Terry wrote:
  I tried to, but since I already opened the case they will not accept
  The Xbox Ambassador says:
  Oh. No,
  Terry wrote:
  the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
  The Xbox Ambassador says:
  Maybe it was auto bought?
  Terry wrote:
  so, how do I get another code generated track Pack if defective?
  The Xbox Ambassador says:
  I do not know.
  Terry wrote:
  bought the game new, so I get the track pack
  The Xbox Ambassador says:
  Oh. It's bad.
  The Xbox Ambassador says:
  I think that if you Exchange 1 code it will buy it
  Terry wrote:
  car pack code worked, starter pack did not work
  The Xbox Ambassador says:
  Oh.
  The Xbox Ambassador says:
  It's a bad
  The Xbox Ambassador says:
  BTW you have an evolution of the tests?
  Terry wrote:
  Yes, I want to? but more anxious to get a code object generated for this pack
  The Xbox Ambassador says:
  Hey if I help can u give me this game too?
  Terry wrote:
  ?????????????????
  Terry wrote:
  So is it possible to get a code for that time?
  The Xbox Ambassador says:
  Hey
  The Xbox Ambassador says:
  Yes.
  The Xbox Ambassador says:
  you need to contact them
  The Xbox Ambassador says:
  and tell them that the code is used.
  Terry wrote:
  I was told to come here? where can I go to get the code?

  Hi Terryg76,

  ·         What version of the operating system is installed on the computer?

  I suggest you to contact the game manufacturer for more help and information.

• Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI".

  Hello

  Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI". Y at - it solution or another method?

  Hi ErikLee,

  Do you have MS Outlook installed on your computer?

  Windows mail import and export opportunities are limited to an Outlook .pst file or an Exchange Server mailbox. They are available only if MS Outlook is installed.
  If MS Outlook is not installed and you start an import or export action, the necessary support files are not present for Windows mail complete the operation. Then I suggest you to install Outlook temporarily and see if the problem is resolved.

  Follow the instructions below and check if the problem is resolved.

  1. reboot your computer, and then start Windows Mail.
  2. on the Tools menu, click Options.
  3. in the connection tab, click on edit to open the Internet Properties dialog box.
  4. in the tab programs, click on an application other than Windows mail e-mail in the e-mail list. Click on apply and then click OK.
  5. click OK again to close the Options dialog box.
  6. exit Windows mail and restart Windows mail.

  If this does not work, I suggest you upgrade to Windows Live Mail to import or export messages that may help you resolve the issue.

  To download Windows Live Mail, visit the following Microsoft Web site:
  http://get.live.com/wlmail/overview

  For more information about Windows Live Mail, see the Microsoft Web site at the following address:
  http://windowshelp.Microsoft.com/Windows/en-us/help/4b30d3d6-abe2-46d1-a5fd-4a1ba786a1381033.mspx

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  I don't know why vista windows no longer charge, or when the files and folders disappeared

  How Windows Defender is on this problem?

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Need help with Windows 7 key.

  I have a laptop that I had to change the HARD drive due to a complete failure.  I had a Windows 7 key I know has been good and have never used, purchased as part of a package of pc 3.   Now the installation tells me that this is not a valid key.  I paid almost $150.00 for this set of 3 installs for Windows 7, about 5 years ago.

  The old HDD is dead, I tried to connect with a USB key and nothing.   The laptop was working fine with WIndows 10, then the portable HARD drive is simply dead.  I need help with a new key, or at least the one I have to work.  The new drive HARD won't have not all partitions or any attached former windows key.  I can't get past the check of Windows screen.

  Need help please.

  You must use the product key located on the COA sticker (at the bottom of the laptop, sometimes inside the battery cover or access. Once you have located the product key, and then follow the instructions below to change the key of the key from the factory to the key on the sticker.

  

  How to change Windows 7 product key

  http://www.windowsvalley.com/how-to-change-product-key-in-Windows-7-and-Windows-Vista/

• Need help with a Hp Papvilion Dv7-1270US, from vista to xp 64

  Well, I noticed that a lot of guys are useful here with installing XP on Vista and yes I'm another unhappy Vista user, I am a graphic designer and let me tell you programs and performance is not very good on my laptop HP that I am ready to go back to XP.

  I have an extra HD a seagate sata 80 GB of my PS3 that I drag never used, so I'll use it to install XP on my laptop

  Its what I need help with drivers, man what a pain. I can install drivers left and right that I know how to do this, but Nlite, manual, unzip its so confusing...

  good so I use Nlite to wake my sata drivers and my installation of Windows XP on my HP I would add something in there like {video card driver} {driver Chipset} etc, what should I put in the wake? and once the wake is done and winxp is installed in what order should I start to install stuff, please guys Im confused and need help if someone can point me in the right direction of the dv7-1270 drivers I would appreciate...

  If I happen to screw up my 80 GB hard drive, not a big deal, blue screen, can not load, etc etc... can I just put my original 320 GB hard drive and back to Vista the way it was. ??? is it possible, which would ease my mind, thank you for your responses and assistance.

  Drivers:

  Chipset Intel, (install and reboot before other drivers) here

  Intel Matrix Storage Manager here

  MS-UAA fo SP2 (required with a reboot before the graphic and Audio driver) here

  MS-UAA fo SP3 (required with a reboot before the graphic and Audio driver) here

  NVIDIA GeForce 9600GT here

   

  Intel Wireless 5100 here

  Bluetooth here

  Realtek RTL8168C Family PCI - E Fast Ethernet NIC here

  Please check first that link written by Joshua Wood and concentrate on problems that may appear when you install the sound card in it.

  IDT High-Definition Audio CODEC Pilot,

  1 sp41693, pilot, work reported in XP here view

  2 SP39671, driver, jobs reported in XP here or here view

  3 sp41698, vista, work reported in here XP driver

  High-Definition Audio (HDA) Modem Installer and driver here

  .NET framework (required before HP Quick Lunch Buttons) here

  HP Quick Launch buttons here

  Synaptic Touchpad here S

  ENE CIR (infrared receiver) here (your Vista driver)

  JMB38X card reader Host Controller Driver here

  HP 3D DriveGuard 1.10 has here

  If you had for 7 unknown devices (buttons drivers), here

  Do a manual installation

  Go to Device Manager, right click on the unknown device,

  Choose update driver, not to communicate.

  Choose the install from a list or a specific location, not search, have-disk,

  Navigate to the location of machine.inf.

  Do it for the rest of the unknown devices

• Need help with the error of connection Internet "Reset local connection adapter".

  Original title: Need help with Internet connection.

  Hi, sometimes when I go to my office (HP 2009 m) I get a message that I am not connected to the internet (although I have no problem with the connection on my IPad).  When I click on solve internet connection Windows Network Diagnostics freezes when it gets to solve problems "the local connection adapter reset."   I have to turn off my computer by unplugging and then it works normally when she returns to the top. (Sorry if my explanation is difficult to decipher, I'm not very tech savvy) This could be the cause and how to fix it?  Thanks in advance.

  Well, I expected more of a response, but I'll wing it from here: your cable goes into a modem.  This modem can be a wireless modem/router, or simply a modem cable to your computer.

  Connection problem you might start by connecting the cable into the modem.  Ensure that it is well defined.  If everything looks good, then it is possible that there is a decline in cable service before he gets to the modem.  For example, the interface side of the House can be affected by a bad connection, for example water intrusion, or poor soil.  So you may want to check into that.  Then, there is always the possibility that your cable provider has lost his momentaily of transmission, and that the modem needs to be reset.  If this happens often, you must contact the cable provider.

  Modem, your computer can be connected by cable, so you will need to check how firmly the connection is.  Then, there is always the possibility that the modem is wrong.

  But if your connection is through a wireless modem/router, your connection may have lost because of a bad signal.  Once more..., the modem/router could go wrong.

  Edit has added:

  Looking back on what you said about the Ipad, I feel that you have a wireless modem/router.  It is possible that your connection to the desktop must be after you have used the Ipad.  For example, you may need to right-click on the monitor icon in the Systray to your desktop and open your network sharing Center.  Even if you can say that you are connected to the Internet, you may not.  Then... just ... simplement cliquer click on 'connect or disconnect', then find your network connection appropriate, right click on that and select disconnect, then immediately right-click the same but select Connect.

  
  

  Will be a new connection to the Internet.

• Need help with the settings of the firewall for Firefox

  My wireless connection is fine, but all of a sudden my mozilla firefox browser cannot connect to Web sites. I can connect using another browser. Looks like I need to change the firewall settings, but I don't know how. How can I distribute my browser to work again? Don't know what happened to start blocking it, but it just happened some time this morning.

  Hi Tara,

  You can check the link and follow the steps and check if this may help;

  Configure the firewall so that Firefox can access the Internet

  http://support.Mozilla.org/en-us/KB/configure-firewalls-so-Firefox-can-access-Internet

  Is has problems, I suggest you to contact the Mozilla Firefox support,.

  http://support.Mozilla.org/en-us/products/Firefox

  If you need help with Windows, please do not hesitate to post. We will be happy to help you.

• Need help with mobile layout

  Hello. Need help with my layout sensitive, using straight lines only html5 and css3 that I can understand and explain a novice level please - without any restart. Desktop and mobile are in a single html doc. The desktop version is 'ok '.

  current version (6_2)

  Try to match these mobile Office layouts

  On the mobile version:

  -Impossible to get the buttons nav blocks, vertical text button Align, and align the image of the product (square pictures) to the Center. (margin: auto; does not work)

  I used heights in the header because I'll have code for desktop, mobile and tablet in the CSS so it changes (and do not know how to support better). Also need to Add a link to the logo image background in header.

  Thanks in advance!

  TheOriginal150mph wrote:

  Hello. Need help with my layout sensitive, using straight lines only html5 and css3 that I can understand and explain a novice level please - without any restart. Desktop and mobile are in a single html doc. The desktop version is 'ok '.

  current version (6_2)

  Try to match thesemobile Officelayouts     

  On the mobile version:

  -Impossible to get the buttons nav blocks, vertical text button Align, and align the image of the product (square pictures) to the Center. (margin: auto; does not work)

  Commenting on just a habit of property changing the css if you have defined it for the desktop version. Your nav elements are not vertically Center because you have a bottom padding set on them for the office, there are only changes for mobile in your css media query.

  .main-nav a {}

  display: block;

  text-decoration: none;

  / * padding-bottom: 15px;   */

  Padding: 12px 0;

  }

  Change the properties for the .product-images for mobile boxes: you have float attached to them for the desktop version and which cascade down to the mobile version, unless you change in the media query:

  .product-image {}

  float: none;

  Width: 50%;

  margin: 0 auto 20px auto;

  }

  As I mentioned in one of my posts related to your project, you will probably have to make your product images a bit larger. They fill the area once they form a column to width of 768px screen or you could resist transform them to one column until a little more by using a media query extra set at a narrow screen width to evoke this action

• Hello all, I need help with creating a dynamic region in jdeveloper 11.1.2.3 version

  . Hello everyone, I need help with creating a dynamic region in jdeveloper 11.1.2.3 version

  What JDK you are using?

  You are probably using an old version of the JDK, that class while compiled under JDK 1.7.0

  http://java67.blogspot.com/2012/10/how-to-fix-javalangunsupportedclassversionerror-major-minor-version-49-50-51.html

  For example, work with the correct version, and it will be fine...

• Need help with sizing and save files in batches

  Hi need help with a project.

  I have thousands of vector files that I need size of 350px X 350px, and then place it on a work plan x 600px-600px.

  Then I need to save it to the web as a PNG with a transparent background.

  Could I do a script for? or is there another way to do it in batches?

  I wouldn't have to open them one by one and resize the work plan then the image and save it one by one as that would take forever.

  Any help some suggestions would be greatly appreciated.

  ID do as a series of actions photoshop if the end result is png,

  pro image processor can help you make automatically, if you must resize batch additional... >

  https://sourceforge.NET/projects/PS-scripts/files/image%20Processor%20PRO/v3_2%20betas/

  I think that your work can run in a few steps, but for simplicity, I would like to start / test with a new photoshop action recording

  Open a file, change the size of the image to 350 x 350

  Change the canvas size,

  then save under...