NETGEAR d7800 modem

Similar Questions

• Connection WRT54GL router Netgear modem.

  I am trying to connect a TV to the internet using a WRT54GL router and a NETGEAR DG834GT modem. I have configured the router by using the wizard, and I can connect to the router with my i phone or laptop. However the router does not appear in the available on Setup Netgear wireless networks, and it is not connecting to the lan either cable modem. Any help would be really appreciated.

  Thanks for the quick response. I'll do

• NETGEAR CM600 speed

  What is the speed of the processor (SoC) in the Netgear CM600 Modem cable 24 x 8? I know that the Netgear CM500 16 x 4 and Arris SB6183 16 x 4 modems use Broadcom chips that have the processing power of the double thread of 600 MHz. The Arris SB6190 uses a chip Intel dual-core that offers 1.2 GHz of processing power for the modem. Offers the Netgear CM600?

  Same Core 600 MHz DT.

  on a simple bridged modem, the processor speed is not very relevant. 600 MHz is always good, that we could get the full range of speeds in the lab tests.

  have a processor of 1.2 GHz on a bridged modem won't give additional benefits. (of course having 32 channels is nice if ISP/MSO is willing to allow 32 channels on the soles of the RF)

• ORBI replace DSL Modem and router Nighthawk?

  I have a Nighthawk AC1900 R7000 router and a Netgear DM111PSPv2 Modem and I was wondering if the system ORBI would replace both of them and give me greater coverage. Anyone?

  Thanks for the reply. Think I'll stick to what I have.

• Need to know the features of the Modem/routers San

  NETGEAR has modem/wifi router which can also act as a Repeater?

  It is not quite unique, but it is one of a few routers Netgear who chose to work on the development community open source. There is work underway with the R8000, but is not as far along. The R7000 was long enough that the firmware gone 3 is relatively stable.

  WARNING: There is always some risk involved with the installation of 3rd party firmware, including the risk of bricking your router and void warranty. Carefully follow the installation instructions.

• Should I buy a Base Station for my Apple products to use Time Machine?

  Should I buy a Base Station for my Apple products? I have a Netgear CG3000D-RG gateway and also use Windows with this modem/router. I'm not able to backup using time machine and bought an external hard drive PassPort but I find it pretty annoying having to plug it in to my MBP whenever I want to do a backup. I would like to use the most convenient airport on my MBP feature, however, it seems pointless unless I have connected to my Netgear router/Modem base station. If I have to buy a base station to make the backup of my MBP easier? I also use 6s and iPad Air iPhone. I would be able to save these features too? Thank you!

  1. you must either have a Time Capsule or connect the drive to your computer when you perform a backup.

  2. Time Machine isn't back from iOS devices directly; they should be stored on a computer and the computer saved Time machine.

  (144712)

• I have 2 routers.  Both can have time capsule for wifi?

  I have a Netgear C3000 Modem/Router, where my internet comes from the wall.  I also have a router VPN Sonicwall for work.  My sonicwall going through my Time Capsule for wifi.  Recently, I upgraded my internet speed with my ISP to 150.  When the internet is channeled through two routers, the speed is quite slow (about what it was before the upgrade).  When I get wifi directly from my Netgear, the speed is much faster.  Can I have 2 sources on the internet through my Time Capsule?  1 for the work (slower wifi) and 1 for home (faster wifi)?

  Can I have 2 sources on the internet through my Time Capsule?

  Unfortunately, the time Capsule cannot handle this... because it would need to have two WAN ports to be able to handle two Internet connections. Since then she has only one, you will need to decide which source you want to use with time Capsule.

• Satellite P10 554 LAN wireless connection

  Hello people,

  I have a laptop Satellite P10 554. I'm not able to get the wireless LAN. I have a Netgear wireless modem and a Netgear USB wireless "receiver". I have configured the entire setup and switched 'on' switch wireless on the left side of the laptop. Nothing happened. The light on the left side on the laptop that shows the availability of the wireless network never radiated.

  I have installed and inserted into the mobile network.

  Please advise on how should I proceed to get the wireless LAN working.

  Thank you in advance.
  Matel

  Hello

  As far as I know that the Wireless LAN is optional on this unit. This means that the appliance has been delivered without wireless card, but it s can put the card in the laptop.
  Are you sure that your device has a wireless card? You can check in the Device Manager. In addition, must be on the wireless network by using the switch on the side of the laptop and the key combination FN + F8.

  Please check these options.

  Good bye

• Equium M50-164 wireless issue

  Hello

  I have an Equium M50 - 164 and a router and a Netgear wireless modem. When you use the wireless internet and navigation to various web pages, my browser tells me often that the "server not found". My wireless signal is "Excellent" and it does not physically lose the connection, as it is still showing as connected in the system tray. I also had the latest firmware for my modem/router and the last driver for the Intel PRO Wireless card. Someone at - it ideas on what could be the problem?

  Thank you.

  Hello

  I put t know what Intel WLAN card you have, but I presume that is 2200 B/G. If so try please install the latest version of the driver in the list on the Intel site.

  You can find it under http://downloadfinder.intel.com/scripts-df-external/Product_Filter.aspx?ProductID=1637&lang=eng

  Very interesting content, you will find under http://support.intel.com/support/wireless/wlan/pro2200bg/

  Good luck!

• Satellite A300 - unable to connect to my router

  Hi all

  I have a Satellite A300 and a Satellite A300D. Since a year im dealing with a problem and eat my heart. I have problems to connect to my router, for the moment I have a Netgear ADSL modem router wireless. When I am looking for a wireless network it seems to find the network, but when I want to connect I get the message network is no longer in the area.

  The distance between my modem and laptops are 3 meters in an apartment, even when im sitting on my router :-) this is not not possible to connect to the wlan. Tried to connect without any wep/wpa encryption, no effect. Played with communication channels @ the properties of the wireless network adapter and the router, but this isn't a solution.

  Before I got the Netgear, I had a Linksys / Sweex / Cisco pro / router Wlan from HP. I tried all brands of wlan, with all routers routers of this I had the same problem.

  Frustrating him of is that I can connect to my neighbors without any problem, but not my own network.

  Anyone having the same problem or know a solution?

  Have you tried to update the WLAN driver on two laptops? You can find it on the Toshiba site and I would update the BIOS too:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  What operating system do you use? If you use Vista, you must disable the WLAN to save energy card. You can do it in Vista Power Options.

  You use the same standard WiFi on your laptop as on the router? For example I mean project. G check this!

  At the moment it is not easy to say what is the reason for this, but I hope that I could help you a little. :)

• WiFi seems to block certain websites on Satellite A100

  I have a Satellite A100 laptop with an Intel pro/wireless 3954ABG card. I connect to a Netgear DG834N modem-router. No problem with the connection, but some sites, including Google, will never connect. I say never, but actually just occasionally, rarely, they connect.

  If I connect to the router by cable, no problem at all. The laptop connected to the other routers and found all the sites with no problem.

  I tried to enter DNS servers directly on the laptop, but that did not help.

  Any ideas, anyone?

  Hello

  > The laptop was connected to other routers and found all the sites without problem

  According to this information, I can't believe that there could be something wrong with the laptop.
  Did you check the configuration of the router? I put t you know router configurations but on my router, I can enable and disable the firewall and change many settings for security.
  I think you should check it out.

  PS: If you can try to update the WLan card driver. For them, visit the Intel Web or Toshiba.

• Course of time disconnected from the Internet

  Course of time is a/c model with hard disk of 2 TB, clinging to the Netgear CM500 Modem and ISP is Cox Phoenix. Connected devices include 3 iPhones, iPad 1 Air, 1 Macbook Pro, an Xbox, Nintendo DS, Wii U, Apple TV 4gen, 3rd - party transmitter Airplay, Vizio TV

  Internet and backup will fall completely on a daily basis - Green Airport fire watch utility in the time capsule but a yellow light in Internet (says it is disconnected). The real physical lights are all green on Time capsule and the modem. To resolve this problem, I have to restart the time capsule in the menu bar and as soon as it restarts, the yellow light on the Internet turns green and shows connected. I tried to separate 5 Hz to 2.4 Hz network but disconnection remains the same. It's very frustrating when you have to go to the Airport utility to restart time cap every day. Can someone help me with this?

  The last AC version TC and the airport has problems with a number of modems... CM500 has not figured prominently, but the problem certainly exists.

  Do a search you will find that it appears often enough to show that you are not alone. Some offer solutions... YMMV. I think that a lot of these corrections is to restart.

  TWC NETGEAR CM500 connectivity problem

  Cox also began to implement IPv6 which creates problems.

  Loss of internet connection?

  I don't think that there is only one size of the entire solution.

  You can do a reset of the TC... redo the installation... Use names short of all the... APPLE NOT RECOMMENDED NAMES.

  Installed IPv6 in the TC to one of the parameters... and if it falls to try another.

  We recommend that usually people use the link-Local only which is actually turn it off.

  Look through the second link I gave you for some alternatives.

  Unfortunately people may experience daily abandonment with all right. It's just not very well with the latest operating system.

  My recommendation is to replace it as the main router... you can use something cheap, is a TP-Link WR1043ND v2<$50 on="" amazon..="" and="" works="" great="" especially="" for="" 3rd="" party="" firmware..="" bridge="" the="" tc="" to="" it="" and="" use="" it="" for="" wireless="" and="" backup..="" not="">

• Channel bonding c3000

  Hello

  This is regarding the C3000 Netgear wireless modem

  I had the slow connectivity for a few days through comcast. I wonder if it has to do with the liaison channel. I checked the wires, did reset, did a reset. When I looked at the settings that I didn't notice that one channel was locked is there a fix to this or this that would be my next step until I go to troubleshooting cable and possibly having to have a comcast tech out.

  Thank you for your help.

  Here's my current data

  Channel Lock status Modulation The channel ID Frequency Power SNR Correctables Uncorrectables 1 Locked QAM256 9 705000000 Hz -22.9 dBmV 26.8 dB 9779432 524181 2 Not locked Unknown 7 693000000 Hz dBmV 0.0 0.0 dB 0 0 3 Not locked Unknown 10 711000000 Hz dBmV 0.0 0.0 dB 0 0 4 Not locked Unknown 12 723000000 Hz dBmV 0.0 0.0 dB 0 0 5 Not locked Unknown 13 729000000 Hz dBmV 0.0 0.0 dB 0 0 6 Not locked Unknown 14 735000000 Hz dBmV 0.0 0.0 dB 0 0 7 Not locked Unknown 15 741000000 Hz dBmV 0.0 0.0 dB 0 0 8 Not locked Unknown 16 747000000 Hz dBmV 0.0 0.0 dB 0 0

  -22.9 is a problem, I suspect water in a separator or the connector on the outside or a bad House amp. You should call Comcast for a service call.

• internet connection Wi - Fi suddenly waste

  I am with AOL, we used to have very fast internet speeds with our netgear wireless modem, but now the internet has gone garbage signal is "very low", but I don't know why this is? nothing has changed? and all the other gadgets that uses that the internet has not been made please help!

  Hello

  Wireless is sensitive to the environment, it might be that a noisy electric signal was introduced recently at the entourage.

  Read this for example, http://www.ezlan.net/wbars.html
  Try to put the computer 3 pi the wireless router and see how he reacts.

  You can also try to connect on the menu of the router and try to change the channel. Maybe that one channel would produce better transmission than others (read the manual of the router wireless for how-to).

• SPA3102 NEED HELP

  I am trying to configure my Voip using the following equipment...

  Gateway Linksys SPA3102

  Standard switch (12 ports)

  NETGEAR ADSL Modem Router DG632

  4 switch

  First of all, I need more than 1 land line? because my adsl modem requires an and the fact SPA3102 box too...

  How am I supposed to put in place? with ADSL, go into the internet port on the SPA3102 and and ethernet port through a switch with 4 computers it...?

  Do I need all ADSL filters?

  Is it still possible?

  you will need the filters for this.

  you have router ADSL. and you have a regular phone connected to the DSL with adsl filter.

  unplugged the phone and connect the rj11 port on the SPA3102 and phonetic regualr the fxs fxo.

  You can then configure the TABS of the PSTN LINE and the line of the device.