Network adapter not working and unable to connect to WiFi

Original title: WiFi

I have an acer aspire with wifi problems. the wireless network adapter will not accept a command to turn it on.  It seems to be stuck on disable or not connected. I went through each one theing can not be repaired.  any help is appreciated.

Hi Tarek,

  1. What is the exact model of your PC Acer laptop?
  2. Did you recent hardware or changes to the software to the computer before the show?

You could deal with the issue due to several reasons such as problems of NIC driver problems, hardware problems, or software.

You can refer to the suggestion that I have provided from the following link and check if it helps.

http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-networking/unable-to-connect-to-Internet-in-Windows-8/675d0f63-DCC1-436C-b49a-9863c22caa4c

Please post back if you have problems related to Windows and we will be happy to help you further.

 

Tags: Windows

Similar Questions

  • I have a Microsoft ISATAP compaq6715b #4 adapter not work and can not get on the internet about this updated driver

    I have a Microsoft ISATAP compaq6715b #4 adapter not work and can not get on the internet about this updated driver

    See the following article:
     
    On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
    http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 932520

    Make sure your network connection is working and properly configured.

    You can try to uninstall and reinstall the Microsoft ISATAP adapters using the following steps:
     
    In Device Manager, this adapter under network adapters and are hidden so you need to click the view menu, "Show hidden devices".
     
    1. in the Device Manager, right click on the element of Microsoft ISATAP adapter #4 and choose uninstall.
     
    2. in Device Manager, click on the "Actions" menu and select "Add legacy hardware.
     
    3. click Next, then select "Install the hardware that I manually select from the list (user)", click Next.
     
    4. Select "Network adapters" under common hardware types, and then click Next.
     
    5. Select "Microsoft" to the title of manufacturer and "Microsoft ISATAP Adapter" in the title of the network card.
     
    6. click Next and follow the remaining instructions.

  • Once I changed my ISP my computer network does not work and does not recognize my router lynsys

    Once I changed my ISP my computer network does not work and does not recognize my router lynsys

    Hi George,.
    Please go to the Microsoft Community Forums.
     
    1. do you get an error message?
    2. do you have the internet connection wired or wireless?
    3. What is the brand and model of the computer?
     
    I suggest to refer to the links and follow the steps in the articles:
     
    Wireless and wired network problems
     
    Resources for the resolution of the problems of modem in Windows XP
     
    How to troubleshoot wireless network connections in Windows XP Service Pack 2
     
    How to reset the Protocol Internet (TCP/IP)
     
    If the problem persists, contact the Internet service provider for assistance.
     
    I hope this helps.
  • Wireless network adapter not working not not for HP Pavilion dv4 - 2020ca

    Hello

    My wireless network adapter does not work after my computer crashed. Here are the details:

    The product name and number:

    HP Pavilion dv4 - 2020ca Notebook PC

    Operating system installed:

    Windows 7 64 bit

    Error message:

    After the accident, there is a message saying that there was an error where a file is not found (unfortunately I did not record the name of file that I felt something time... even the message said if this is the first time my computer crashed I should just restart...)

    Changes to the system:

    I was updating my AVG antivirus software. I left the computer for maybe 10 minutes, and after his return to him, I found that a crashed and showed the message above

    Any help would be appreciated.

    Hello

    Before I got your answer, I restored my computer to an earlier time and now my wireless adapter seems to work very well. I don't know if this computer recovery solution is temporary or permanent, so I always keep an eye on the installations and updates that I do. and if the same problem occurs, I will try the suggestions you have made.

    Thanks for the help

  • Satellite A60 - adapter not work and make a beep

    Hello

    Hope this is the right forum.

    I have a laptop Toshiba A60 series, I don't know if his satelliate or A60 Equium, but it is.

    In any case this week adapter does not work. I had plugged and initially it seemed that he was not charging the laptop, even if the light on the adapter on and now the lights and all I can hear is a beep - even when it is not plugged into the laptop.

    My laptop is now to zero battery so I can not even turn on, it's just flashing orange all the time.

    I guess that the adapter just does not? Do I have to get a new adapter? Please tell me I don't have a new laptop of geta - I have some stuff I want to keep.

    Thank you very much

    > My laptop is now to zero battery so I can not even turn on, it's just flashing orange all the time.
    In my opinion, this isn't a problem with AC adapter
    If computers laptops just flashing orange LED power then it means that a (possible motherboard) error has been detected.
    The flashing provides an error code and it can be read by a technician for laptop.

    In your case I would not buy a new AC adapter because you are not 100% sure what case this question. I think the laptop must be checked to see what could be the problem and then you could decide on the further handling.

  • Atheros AR5007EG Wireless network adapter not working do not after Windows 7 installation

    After a clean install of windows 7, Driver atheros wireless AR5007EG network card button no longer works. As a result not able to connect wirelessly. I first upgraded to vista, but did not uninstall norman antivirus, which gave me a few problems. Impossible to uninstall or update any longer, so I decided to install win from scratch. Anyone know how to get my wireless to work. PC is Fujitsu Siemens, about 2 years.

    The driver has been updated and status is installed, the problem might be that the wireless button no longer works, so I'm not able to turn it on. Is there a separate driver / settings to do this, or is it included in the wireless driver.

    You can find a better driver for your Atheros AR5007 at http://www.station-drivers.com/page/atheros.htm

  • Satellite P200 P3PB3E: Network adapter not working after installing XP

    I have a Satellite P200-p3pb3e running xp - sp2 inder. I downloaded the drivers on the Toshiba site and everything is working fine except for one element: the Ethernet controller is marked yellow in the Device Manager.
    I don't know where I can get the driver.

    A strange point that may or may not have an impact: Atheros network card is displayed as AR5006X with EVEREST, while Device Manager displays AR5007EG.

    I used the driver from the Web from Toshiba site.

    Hello

    Satellite p200-1dy seems to be equipped with chip Realtek 10/100 Base-TX Ethernet.
    Therefore, it would be desirable to search for on the site Web of Realtek Lan XP compatible driver.

    :) See you soon

  • ExplorerFrame.dll is not working and unable to solve the problem of other similar positions. Who can help me?

    Windows Vista Edition Home Premium. I can't looking for photos, Control Panel, computer etc... He said: "class not registered" when I click on any folder. I googled the error and solutions must go to cmd.exe and type regsvr32 ExplorerFrame.dll. Do that and it doesn't work. I get a response that says: "ExplorerFrame.dll" module is not compatible with the version of Windows that you are running. Check if the module is compatible with a x 86 (32 bit) or x 64 (64-bit) version of regsvr32.exe. »

    I also tried sfc/scannow and that crosses and said errors were found and he was not able to fix all the. It's that I got. I hope that someone who has had this problem can help me find a solution.

    Kevin

    Hi Kevin, welcome Microsoft answers forum! You did changes to the computer? Have you installed the latest windows updates? Step 1: Check if windows is enabled, if not, go ahead and activate windows how to activate Windows Vista http://support.microsoft.com/kb/940315 step 2: install the latest windows updates.

    Step 3: Check with a different user profile

    If you do not have a different user account, you will need to create a.  If everything works fine with a different user profile, you can infer that the user profile is damaged, click on the link to find out how to solve this problem.

    Difficulty of a corrupted user profile

    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

    Step 4: Online a scanner for any threat and try to correct

    http://OneCare.live.com/site/en-us/Center/cleanup.htm

    You can check the link that addresses a similar issue and try to install the hotfix mentioned in KB 935855 http://social.technet.microsoft.com/Forums/en-US/itprovistadesktopui/thread/1480f05f-f2a5-4e43-9c78-39ddf9193d93

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I lose my internet connection, reset network adapter internet works for a few moments and everything happens again

    Hello

    OVET the past 2 weeks, my internet connection crashes. I'm going to dianose and the repair center and get a message 'reset with network adapter' and I press OK. In a few minutes, the internet comes back on that lose the connection again in time. Sometimes, when this happens, I get a message that says "there may be a problem with your DNS" and that windows cannot automatically resolve the problem and communicate with my admin or ISP provider. I contacted my ISP everything is good at the end and I even bought a new router but still lose the connection.

    I updated the driver for the network adapter, reset it and also clicked the 'allow PC turns off to save power"in the Device Manager field. I also unplugged the router and went directly from my modem to the computer.

    I have a s 530 Dell Inspiron and am using a cable ethernet to the modem/router.

    IM losing my mind here...

    Any help?

    Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

    Do you have these drivers directly from Dell?

    http://support.Dell.com/support/downloads/index.aspx?s=BSD&c=IQ&l=en

    Reference Dell Drivers, manuals, etc. is at the link above.

    Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

    Troubleshoot network adapter problems to Microsoft link above.

    Try without commitment TCP/IPv6:

    If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

    http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

    See you soon.

    Mick Murphy - Microsoft partner

  • WIFI adapter does not work and can not be detected

    Hi guys,.

    I use HP Pavilion Dv4 3106tx. I don't know what happened, but out of no where my wifi sort adapter stopped working. whenever I have activate my wifi button, bluetooth doesn't work and does not display the icon of wifi which usually shows at the bottom right of the taskbar. I also checked Device Manager > network adapters, the wifi card is not there. I also tried "Search the hardware changes", but still there is not Wifi adapter appears.

    Right now I'm just connect via ethernet for internet connection because my wifi does not work.

    Can you help me out here guys...

    Thank you!

    Hi @pooroontong

    Welcome to the Forums of HP Support!

    I understand that your wireless network is most obvious in your systray or in Device Manager. I'm happy to help you.

    The first thing to do is to take a look at this page which deals with the problem you describe. Try it and let me know if you need help most.

    Universal solution WLAN, Wireless and Wi - Fi errors

  • Someone in the building uses Apple can 790-795 network this person hack me and who is? Berlin writes. Very often, I notice that my network does not work as it should.

    Someone in the building uses Apple can 790-795 network this person hack me and who is? Berlin writes. Very often, I notice that my network does not work as it should. Thank you. I'm really not sure if it's true that Apple can´t be hackend? First because I use Google and Google mail on the same computer.

    Someone in the building uses Apple can 790-795 network this person hack me and who is?

    Wi - Fi networks will be displayed in the menu OS X Wi - Fi, including those created by other Apple routers. It's normal. It does not necessarily indicate that users connected to these networks can connect to yours. In particular, if you use a wireless password and change it often.

  • I can connect to my home network, but all the other networks do not work...

    I can connect to my home network, but all the other networks do not work... Error window says:

    Windows could not connect to the (X)? network name?

    [Link] Solve problems

    [Link] Learn more about Internet connection problems

    I gave security, uninstalled reinstalled wireless - uninstall security firewall reinstall and not go...

    Windows 7

    Hello

     
    1. What network are you trying to connect to?
    2. You are not able to connect to the Internet?
    3. Are you able to connect to the other network with wired network?
     
    Try the methods provided and check.
     
    Method 1:
    Check out the link and follow the steps.
    What is network discovery?
    http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discovery
     
    Method 2:
    Check out the link and run the troubleshooter.
    Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
     
    Method 3:
    Reset the TCP/IP and check. Check out the link and follow the steps.
    How to reset the Protocol Internet (TCP/IP)
    http://support.Microsoft.com/kb/299357
    Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows
     
    Method 4:
    Check out the links and check out them.
  • My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

    My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

    Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.

    Where do you have the phone first?

  • can't connect to my home internet income james ashley forgot it the link password does not work and the password I was given does not fit into the password box

    can't connect to my home internet income james ashley forgot it the link password does not work and the password I was given does not fit into the password box

    Are you sure that you do not have to register on this site through the usual way and what you should be used elsewhere on the site?

    Have you tried to contact them to help this topic or to check if they have a FAQ on this subject?

    I found this in another thread that you created [*]:

    I'm not sure do I bought a home income internet james ashley program and I copied the login info I was given and the password does not fit into the window of password and I forgot the link password does not work I sent emails, but do not receive an answer im don't know what to do is anyway you can help me to recover my info or help me change the password?

    I assume that you have downloaded and installed this program and need to use this password in this program or only you can use these data to download the program from the site james ashley?

  • I have re installed the operating system on my Dell Studio 15 for Windows Vista 32-bit. But now the network controller is not working and I can't use wireless internet

    I have re installed the operating system on my Dell Studio 15 for Windows Vista 32-bit.  But now the network controller is not working and I can't use wireless internet, but I can plug a cable ethernet in there and get online.  What can I do?

    I have reinstalled the operating system on my Dell Studio 15 for Windows Vista 32-bit.  But now the network controller is not working and I can't use wireless internet, but I can plug a cable ethernet in there and get online.  What can I do?

    Install the appropriate network device drivers and software from the Dell downloads web site for your particular model, or better yet, tag Service...

Maybe you are looking for

  • iMac is painfully slow startup

    Hello It is has been a problem for a while, but seems to have slightly worsened with El Capitan. After start-up or a restart, it is a good 6-8 minutes - without exaggeration - until my computer can begin to open programs without huge lag. About 10 mi

  • Satellite L350 - access code for the router

    Dear Sirs I have a Toshiba Satellite L350 under Windows 7 Ultimate. For the first 5 months, he remembered the wireless to the router access code. I then installed a BT Home Hub which I subsequently removed and then the Windows 7 machine will remember

  • How to remove downloaded games

    My boys have downloaded mincraft of many times, they keep on forget passwords. I would like to remove all the downloads of this game they can't play as passwords and not right incorrect username. need to start over costs.

  • HELP PLEASE! WUSB100 ver. 2 and WUSB54GC worm. 3 and Windows 7 64 bit

    So I got both of these cards and can not get either to work with Windows 7 64 bit installation. The WUSB100 presents on the compatibility list as being compatible with 32-bit and 64 - bit Windows 7. The worm shows. 3 WUSB54GC is compatibile with Wind

  • Who is ALERTSOFT?

    I received a phone call from a company called ALERTSOFT. They want to talk to me of unnecessary files that may be harmful to my computer and my private life. Part of the ALERTSOFT of the center of Windows services and safe is to help me?