Network keeps disconnecting Fix, Intermittent.

Similar Questions

• 5th generation AE extension network keeps disconnecting

  My WiFi network consists of two extremes of the Airport (the two 5th generation).  One is connected by Ethernet to a modem cable in my house.  The 2nd is located in my studio, a separate building; the two AEs are about 75 feet apart with a couple of walls between them.  The 2nd unit in the studio is implemented to expand my network.   I have several macs on the network, all running El Capitan; also, a couple of iPad and an iPhone, several printers, etc.

  For a long time, everything worked fine; but for the last month or two, the AE in the studio which extends the network disconnects and to blink yellow.  I found that the only way to fix is to pull the plug, then go to the House and pull the plug on the main AE and the modem cable.  Then I plug the cable modem back, then the main AE and finally the 2nd AE extending into the studio.   This restores all for a day or two, and then the studio AE stops again.

  The main AE and internet connection in the home is always very good. Sometimes, indeed, my wi - fi devices on in the workshop will always have an internet connection even when the AE there disconnects, because they are still in the range of the main EI in the House.  The problem is, I have an ethernet switch connected to the AE in the studio with several hanging devices, and I lost all these connections when the problem occurs.

  Can anyone help diagnose this?  The only thing I've tried is to restore the default settings on the 2nd AE in the studio and then re-setting up to expand my network again.  It seems to work for awhile, but the same problem will occur later.  I'd appreciate any help anyone could offer.

  My experience is about the same. I was actually very happy with the Setup program for a long time... It was necessary the occasional blow to wake up but who said a week. In terms of reliability wireless on household appliances, all right. But as time passed, it slowly grew worse and I couldn't solve the problem. I have now stopped doing this way and went to a different brand Repeater that is much more reliable.

  IMHO... you need something better than the wireless extension. Seriously for your configuration to run ethernet. Separate the building, you will need to check your local regulations for the grounding of issues. The authorities may insist on the use of the fibers, but if you can bury the ethernet or run a catenary so I always this way.

  If your studio is run from home without a counter power, you can also use EOP (homeplug) adapters that can be very successful. Once the power is measured so you have no common circuit so it won't work... It is always an experience if they will work.

  So, how to solve the problem... If you are not able to use ethernet, fiber, or EOP or not in a situation where they can work, so let me recommend you run a dedicated wireless link. You need a pair of appropriate external units, e.g. ubiquiti 5 GHz WAP where we're connected in your home via ethernet to the outside wall or in a window where you can see the studio and the other is also the same... facing windows is ok, you can use face to face... If not, they must be installed outside under the eaves.

  For now... Let me make some suggestions for your pair of AE. This might work better in the short term, but not in the long term.

  1. use 7.6.1 firmware. It of always better for me than to use 7.6.4 and was reproducible...

  To change the firmware, do appear on the summary page, click the version number with the down option. You will see a list of possible versions.

  

  Simply choose 7.6.1 (nobody else)

  Do a factory reset once it degrades and start over. Do it now while both are available. Studio first that she still has the connection lower.

  2. There are too many auto in the installation program. Set specific channels and name the bands differently. It is of course in your main AE.

  for example, by using very short names, without spaces and pure alphanumeric characters. Even for the passwords but characters 8-20...

  2.4 ghz to say the value... Set of 5 GHz to say AE5ghz and AE24ghz.

  Put the string in 2.4 ghz 9 and 5 GHz 36 or what is the lowest channel available.

  3. now install the studio one and are trying to use 5 GHz. It may not work, as the range might be too big... but even with the bad signal, you should be able to see a clear improvement in stability with 5 GHz. If it doesn't work, well, you must use the 2.4 ghz... and now a few funny things will happen as the 5 GHz in the studio will get 5 GHz named AE24ghz... don't worry about this... all part of the fun.

  4. keep track of signal and the speed of the link. Utility v6, you can hover your mouse over the link where it is said well. (Don't even bother if the link says not as good).

  

  Notice the link is located on 5 GHz... as suggested I forced to one, the signal level is low, - 79dBm is much lower than I like, but the connection speed is far superior to any link 2.4 GHz and was much more stable.

  Now, let me suggest as the best way to keep track of what happens is to install a utility airport v5 somewhere on your network... even in a windows or machine dual boot a parallels... There are tricks to install even in El Capo. The reason is that you can get a graphical view of the binding of the two ends.

  

  This is the screenshot of the link... and by using the MAC address of the two units I can follow what is happening.

  But in the end, it became too unreliable... I think that the AE (mix with equivalent TC in my case) just wore out. Wireless signal in routers seem to be deteriorating over time...

  My new Setup is complete one until I run ethernet. I got the hand on a cheap AC router that makes universal Repeater... and it works very well.

  Much more poor in a perspective of network... but better reliability point of view.

• Cable network keeps disconnecting after a period of time

  Hello

  I just bought a new Lenovo Z510 and I have serious problems with the network Ethernet cable. When I turn on the laptop and plug in the cable, it works for about 5 minutes. Then it suddenly disconnects (with software) while physically he is still connected. When I restart the computer, it works again for 5 minutes that follow. It's really annoying.

  1. I have not installed new software to date.
  2. it is not the problem of the cable (works fine on other laptops).
  3. Windows 8.1 diagnosis only says that the cable is diaconnected.
  4. I tried to reinstall the driver so I have the latest version of the web page from lenovo.
  5. There is not BIOS problem because it works fine first - then disconnects.

  I have really no idea of what it can cause. Does anyone have a similar experience? I suspect that maybe some Powermanagement kills service or something? But have no idea how to solve. Thanks for any advice.

  Ondrej

  Hi thanks for the reply. I tried everything above. Without success.

  Then I googled many repairs possible and, finally, the problem ceased when I
  uninstalled McAfee security. I have no idea what caused the problem but now
  It works perfectly.

  If the solution of the problem of Ethernet connection: uninstall McAfee!

  I have no idea why Lenovo should deliver so many third-party with software
  their products. And even if it causes problems. I have no idea if its only
  me, but I really suggest it first uninstall all the ballast that comes with
  the laptop. Its only 30 same day trial. Not good in it. Money for
  Lenovo ads. And a lot of nerves to its customers!

  Best regards and I hope this helps someone.

• Laptop keeps disconnecting the connection but not others

  I have two laptop computers Toshiba Satellite A300D and A500-13F and a new Linksys WRT120N router. A300D has an Atheros AR9281 wireless network adapter, while A500 has Intel(r) WiFi Link 5100 AGN, and both have Vista 32. It's the A500 which keeps disconnect the connection, it's as if it keeps restarting from the router. It will do this every few minutes and I can't do anything normally on the internet.

  I tried to do something but nothing works. Updating the drivers for the adapter on the A500 does not resolve the issue, although A300D works normally without updates, so there must be something wrong with the adapter on the A500. I also have sellected maximum performance in Power Options > change plan settings > change advanced power settings > wireless card settings, because I read somewhere that energy-efficient settings can interfere with the adapter. I thought that this solution worked until he started to lose and by restoring the link again. Everyone guess what else could be wrong? I generally know how to fix things, but the wifi is a new thing for me and don't know much.

  Yes, in this scenario, this could be the problem with the adapter. Then I suggest that you contact the hardware vendor.

• Why Outlook keep disconnection with V33.1? Works fine in IE 9

  Since I updated to Firefox V33.1 Outlook keeps disconnecting from the server. I have no problem when you use Outlook in IE 9

  You can try the following steps in case of problems with web pages:

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• My Satellite L350 keeps disconnecting and then restart.

  Satellite L350 keeps disconnecting and then restart.
  The fan is free from dust. I have reinstalled Windows
  There is a new battery for 1 year

  If the laptop is turned off, the battery can be charged. The laptop runs normally on the battery.
  As soon as the power adapter is connected, the computer turns off.
  When I use the computer without a battery but with the AC adapter, the computer shuts down. Test with a different AC adapter, the computer turns off.

  If the cable between the motherboard and the CC is originally the problem whether it is unlikely?

  Someone has an idea to help me with this problem?

  > From the moment when the AC adapter is connected, the computer turns off.
  There must be some kind of electronic problem of power on the motherboard.
  I put t think that the AC adapter is affected since you have already tested another (good job?) Power adapter.
  I think in case of malfunction of the motherboard, the laptop fix can be a costly affair
  The motherboard is one of the expensive parts for laptop and I think that that's not worth buying a new part for this old model of laptop.

• Internet keeps disconnect and reconnect every 3 minutes

  Original title: network programs network networking Internet Web site Site Web Web Site URL

  Internet keeps disconnect and reconnect every 3 minutes approximately. I changed the computer so its near the door (the router is in the room) but I never had this problem with my laptop.

  Hello

  1. which version of the Windows operating system is installed on the computer?

  2 did you a recent software or changes to the material on the computer?

  You can go through the steps mentioned in the link and the Coachman.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Cannot logon - if I try to login, it keeps disconnecting themselves.

  After my computer starts to the logon screen, but I can't log on to the office. If I try to login, it keeps disconnecting. I tried to start in safe mode, but it was still disconnecting when I try to disconnect it. Please help it is urgent

  The "loop of logon / logoff" is usually caused by malicious software.
  See if any of these items will help you:

  «How to fix the log / close the loop in Windows XP»
    <>http://www.ehow.com/how_4527843_onlog-off-loop-Windows-XP.html >

  The following article uses the resolution of this problem as an example for editing the registry using Bart PE:

  "How to edit the registry offline using BartPE boot CD"
    <>http://WindowsXP.MVPs.org/peboot.htm >

  HTH,
  JW

• Linksys AC1900 Smart Wireless keep disconnecting?

  Hello

  • I installed 2 routers AC1900 Linksys and E1200, my Local network is running on AC1900 at least 50-75 devices on the same time.
  • I checked the Modem (Internet connection 24 Mbit/sec dedicated fibre) and works very well, but the AC1900 router keep disconnecting Internet and thanks to my users suffer.
  • I checked all the circumstances of the failure, but not luck. Please guide me.

  The following services are disabled on the router:

  1. Guest access
  2. Parental control
  3. Prioritization of media
  4. Wi - Fi Protected Setup (previously it was ON, but the problem exsits).
  5. MAC filtering
  6. DMZ
  7. DDNS

  The firewall is on, with default rules.

  NOTE: I have 2 connections separate intenert (24 Mbps) for each of the routers.

  Thanks in advance

  for the two of you, which version is your hardware and what version is your firmware? If they are material ver 1.0 so make sure that you use the older version of the firmware that ends with 156465 and not the version which is 158863. This version is only for version 1.1 of the material. You can get the 1.0 version of the linksys web page but remember to select hw 1.0 in order to see it. Once download you the install from the browser page and your abandonment should be better

  You can also disable cut through redirection on the login tab admin page and see if that helps. If please post back and let me know. I want to talk this problem to their guys of dev

• Micro adapter USB keeps disconnecting when I try to copy the files.

  1 messages
   
   
  Micro adapter USB keeps disconnecting when I try to copy the files.

  Hello

  I have a Micro SD card reader, when I insert my memory card into the reader, he comes and stays there until I try to transfer files to the memory card, or if I run a h2testw test it disconnects.

  Its getting boring, I bought another card reader, but the same problem persists. I tried the drive in my computer and it seems to have worked here, but just on my laptop, I'm having problems.

  Any help will be appreciated, thanks in advance!

  Hello

  1 did you change on your computer?

  2 did you receive an error message?

  I suggest you to check with the other USB port.

  Method 1:

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Method 2:

  I suggest you to remove and reinstall all USB controllers

  To remove and reinstall all USB controllers, follow these steps:

  (a) click Start, click Run, type sysdm.cpl in the Open box, and then click OK.

  (b) click on the Hardware tab.

  (c) click the Device Manager button.

  (d) expand Bus USB controllers.

  (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  (f) restart the computer and reinstall the USB controllers.

  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.

• Why my cable network keep disappearing?

  My network keeps disappearing.

  It works very well for several days, then suddenly it disconnects.

  The network itself works fine and accessible with the help of other computers. The router is OK and works correctly.

  On the Windows 7 computer, however, the network turns off without warning.

  Run the troubleshooter network leads to "no connection is available. But Wired etherenet is available and functioning OK. There is no problem if I remove the cable and plug it into another PC.

  Something on the Windows 7 machine is clearly at fault - but what?

  Hello

  I had already tried in safe mode and the problem persists.

  I have, I think, discovered the issue.

  Automatic update Windows 7 is activated and updated the driver for the network adapter to the latest version.

  When I restore the old version, there is no problem.

  There is clearly an error in the driver for the NIC - a card Realtek PCIe FF. The new driver is the problem - with the old driver, everything is OK.

• I want to install Illustrator on my second computer and it keeps disconnecting. My first computer is turned off

  I want to install Illustrator on my second computer and it keeps disconnecting. My first computer is turned off. I pay package the student since April 2014 and for a year, and I understand that I can get Adobe in two computers at home.

  Thanks for your reply. I pay $ 22 a month package for a year. I just spoke with the help of Adobe, and I solved it they problem. I'm on my second computer. Magali helped me, service excellent customer!

  You are now chatting with 'Magali.

  Magali: Hello. Welcome to Adobe Technical Support.

  Magali: Hi there.

  Magali: Could you please develop your question?

  Magali: Are we still connected?

  Maria V Abreu Valarino: Hi. I want to install Illustrator and some other applications adobe on my second computer and it keeps disconnecting. My first computer is turned off. I registered until I turned it off. I have already downloaded creative cloud, I introduce my user and password and it tells me "you have been disconnected. I pay the student since April 2014 Kit and I'll do it for a year, and I understand that I can get Adobe in up to two computers at home. What should I do?

  Magali: If I understand correctly, you can not connect to the desktop CC application. Is this correct?

  Maria V Abreu Valarino: Yes, in my second computer

  Magali: Thanks for confirming.

  Magali: I'll be happy to help you with this problem.

  Maria V Abreu Valarino: Thanks a lot.

  Magali: Close all adobe applications running including the CC desktop application.

  Magali: You're welcome.

  Maria v Valarino Abreu:

  Magali: Place you C drive and type %LocalAppData% in the address bar and press ENTER.

  Maria v Valarino Abreu:

  Magali: Go to adobe.

  Magali: Go to the OOBE.

  Maria V Valarino Abreu: I don't have a folder under that name.

  Magali: Appointment to the Local and then go to Adobe.

  Maria V Abreu Valarino: ok, I'm in OOBE

  Magali: Then go to opm and remove the opm.

  Magali: May I ask if you are finished?

  Maria V Abreu Valarino: it says that the file is currently in use, does not want to remove it, and CC Office App is not open

  Magali: Launch the Task Manager and click on the "processes" tab and put an end to all the processes associated with adobe, creative cloud and synchronization of the base.

  Maria V Abreu Valarino: done, I deleted the opm

  Magali: Okay.

  Magali: Launch the CC desktop app and try to connect.

  Magali: And tell me if you still get the error?

  Maria V Abreu Valarino: ok, give a second

  Magali: sure.

  Maria V Abreu Valarino: nop, I don't sign

  Magali: I know the error message you get?

  Maria V Valarino Abreu: "logged out".

  Magali: Okay.

  Maria V Valarino Abreu: "you have been disconnected".

  Magali: Can I know if you are in home network or office network?

  Maria V Valarino Abreu: I am a student

  Magali: Okay.

  Maria V Valarino Abreu: I have two computers at home

  Magali: Okay.

  Magali: If please browse the computer and then go to the c drive.

  Magali: Go to windows.

  Maria v Valarino Abreu:

  Magali: Go to System 32

  Magali: Go to drivers.

  Maria V Valarino Abreu: I'm here

  Magali: Then go to etc and find the Hosts file in the etc folder and copy it to the desktop computer.

  Magali: and then open it with Notepad and copy the content and paste it on the chat window.

  Maria V Abreu Valarino: # Copyright (c) 1993-2009 Microsoft Corp. # This is a sample HOSTS file used by Microsoft TCP/IP for Windows. # This file contains the mappings of IP addresses to host names. Each entry # should be kept on an individual line. The IP # must be placed in the first column followed by the corresponding host name. # The IP address and the host name should be separated by at least one space of #. # Additionally, comments (such as these) may be inserted on lines # individual or follows the name of the computer that is designated by a symbol "#". # Example: # 102.54.94.97 rhino.acme.com # source server # 38.25.63.10 x.acme.com # x client name resolution host # localhost is handled within DNS itself. # 127.0.0.1 localhost #: 1 localhost

  Magali: Thanks a lot.

  Magali: Close the hosts file.

  Magali: Launch the internet browser explorer.

  Magali: I know if it is launched?

  Maria V Abreu Valarino: ok

  Magali: Open Internet Explorer > options Internet, click on the tab "connections". In the tab 'Connections', 'LAN' selection settings, you will be able to display the Local network settings. In the LAN settings box, select the checkbox "automatically detect settings".

  Maria v Valarino Abreu:

  Magali: Then "uncheck" all the other boxes as "configuration Script auto use", "Use a proxy server," proxy server "." Click on the ok button and then close the Internet options.

  Maria v Valarino Abreu:

  Magali: Launch the creative Cloud desktop application, try to connect using Adobe ID and password.

  Magali: I know the status?

  Maria V Abreu Valarino: it seems that it is me signing in, yet the blue circle of uoloading

  Magali: Okay.

  Maria V Abreu Valarino: Yes! I'm registered!

  Magali: great!

  Magali: Now, you can go ahead and the CC desktop application allows to install the CC apps.

  Maria V Valarino Abreu: John, you're the best! Thank you very much!!!

  Magali: You're welcome.

  Magali: I'm so happy to hear this from you.

  Magali: Is there anything else I can help you?

  Maria V Abreu Valarino: can I do a survey of your service?

  Magali: You receive an email that will contain a link to complete a survey in option to provide your comments on the experience of the support. Your comments are much appreciated.

  Magali: Her makes me happy to help you.

  Maria V Abreu Valarino: Yes I'll do without a doubt! Thanks again, have a nice day!

  Magali: You're welcome.

  Magali: take care.

  Magali: Please contact Adobe.  We are available 7 days a week, 24 hours a day. Good bye!

  --

  The chat session is over.

  Please contact Adobe.

  This chat session is over.
  Please contact Adobe

• El Capitan to 10.11.6 now airport Time Machine keeps disconnecting update

  I've just updated El Capitan to 10.11.6.  Now the airport Time Machine keeps disconnecting. Any suggestions?

  Time Machine is a software on your Mac, which is used to save the contents of your Mac (s) at an airport Time Capsule.

  An Airport Time Capsule is a wireless router with a hard drive built-in, designed to store backups Time Machine of your Mac (s).

  With this in mind, could you give more details about the problem you are having?  Disconnection from the airport Time Capsule or disconnecting from Time Machine?

  Do you get any error messages? If so, what exactly is the message that you receive?

• the magic mouse keeps disconnect

  Since I upgrade 10.11.5 OS, (iMac, retina-1 years material) my magic mouse keeps disconnect in the middle of my work - installed new batteries. And, when my computer is asleep, it is not wake up. Everything freezes. Any thoughts?

  The index is with your comment "of the new batteries installed.    Once you have upgraded to 10,11 El Capitan, there is a mouse specially designed for this OS.   It is not really spoken aloud, but the box for the Magic Mouse 2 has a clear statement to be for OS 10.11 (+).   As operating systems go for ever higher, it may make sense to buy new mouse because all subsequent operating systems will need the facilities of this new creature.    The old mouse will work to some extent, but not, it seems, 100%.

• Wireless connection keeps disconnecting - Satellite C650 16U

  Hello

  My wireless connection keeps disconnecting frequently and I have to reconnect manually. I don't think that it is a router problem, that this does not happen with the other laptop which is used in my house. Any ideas why this is?

  Thank you

  Hi mate

  I recommend you in Win 7 the power management of the energy saving settings.
  There you can change (disable) WLan Card to save energy.
  It helped in my case.

  Please also check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59177

  As I have said; power management setting is the key, you must also update the WLan driver!