5th generation AE extension network keeps disconnecting

Similar Questions

• Cable network keeps disconnecting after a period of time

  Hello

  I just bought a new Lenovo Z510 and I have serious problems with the network Ethernet cable. When I turn on the laptop and plug in the cable, it works for about 5 minutes. Then it suddenly disconnects (with software) while physically he is still connected. When I restart the computer, it works again for 5 minutes that follow. It's really annoying.

  1. I have not installed new software to date.
  2. it is not the problem of the cable (works fine on other laptops).
  3. Windows 8.1 diagnosis only says that the cable is diaconnected.
  4. I tried to reinstall the driver so I have the latest version of the web page from lenovo.
  5. There is not BIOS problem because it works fine first - then disconnects.

  I have really no idea of what it can cause. Does anyone have a similar experience? I suspect that maybe some Powermanagement kills service or something? But have no idea how to solve. Thanks for any advice.

  Ondrej

  Hi thanks for the reply. I tried everything above. Without success.

  Then I googled many repairs possible and, finally, the problem ceased when I
  uninstalled McAfee security. I have no idea what caused the problem but now
  It works perfectly.

  If the solution of the problem of Ethernet connection: uninstall McAfee!

  I have no idea why Lenovo should deliver so many third-party with software
  their products. And even if it causes problems. I have no idea if its only
  me, but I really suggest it first uninstall all the ballast that comes with
  the laptop. Its only 30 same day trial. Not good in it. Money for
  Lenovo ads. And a lot of nerves to its customers!

  Best regards and I hope this helps someone.

• Network keeps disconnecting Fix, Intermittent.

  I noticed a lot of people having problems with intermittent disconnection problems. I had this problem for a very long time since getting the office. I was in my mind ends when I finally called support and they wanted to charge me for a PC that was only 5 months old my issuue was a software problem in which it was not.

  I have to note for this fix to work your "network card" must be PCIe to be newer models. To confirm this, go into Device Manager and look for your network adapter and right click. While in there, go to the "Power management" tab and uncheck the box that says "allow the computer to turn off this device to save power". After doing so, go to 'control panel' and select power options. Regardless of which box is checked, go to the far right and click on "Change Plan settings". This takes you to another screen called "Change Plan settings". You will notice two options under "put the computer to Sleep.  Select "change power avancΘs." This opens the 'Power Options' tab, once here, select the PCI Express card and expand. Select the link "State Power Management", and then expand. Set the "Link State Power Management" to off. You won't have to restart, make sure that you apply the setting and select ok. I did it just the other day and it resolved my intermittent disconnection. I have not had a problem since. Under the default Dell system, the powers of the PC down the PCIe link causing the disconnection. When you run the network troubleshooter utility, it brings the PCIe link off mode 'sleep' and reconnects to the internet. I guess that this same rule can be followed for the setting USB under power as Options, but which does not apply to me, so I never tried.

  By the way, thanks for nothing Dell. Just inform the technicians of your phone to troubleshoot your past and perhaps future customers not to recommend the update and reinstall an OS when it is clearly not the issue here. Believe me when I say that you are not the only manufacturer to hear complaints. HP also hates me because their networking has major flaws. Good luck to all, Focker outside.

  Since a few years I posted this fix with link state power management settings. I just wanted to check the reason for which it can become a problem by simply changing when the desktop or laptop computer goes to sleep or Hibernates.This is not a defect of the operating system. If you want to check this condition without the tweak mentioned above for LSPM parameters. Simply go to the Panel and select hardware and sound then power options. Click on change settings for already marked feeding management and set the display forever and value sleep ever. If you do not drop your connection use the tweak above to customize settings for network adapters in the Device Manager. I did this tweak many laptops and desktop computers because I found the problem with LSPM and it works. This tweak can be applied to any manufacturer that uses the windows-based operating system. Good luck to all.

• Why my 5th generation ipod can not send or receive messages from other apple devices?  My ipad works great, but my Ipod touch keeps giving me the exclamation with message not delivered?

  Why is not my Ipod 5th generation touch send or receive messages from other users of apple more on wifi devices? My ipad mini still send and received messages on the thin wifi but ipod guard give me exclamation red with the message not handed over.  I'm happy to send to my habit a few contacts that I always send to apple devices have.  I don't know why she would suddenly leave the sending and receiving.  I did the last update, it still does not.

  Have you tried

  If you can't send or receive messages on your iPhone, iPad or iPod touch

• Why Outlook keep disconnection with V33.1? Works fine in IE 9

  Since I updated to Firefox V33.1 Outlook keeps disconnecting from the server. I have no problem when you use Outlook in IE 9

  You can try the following steps in case of problems with web pages:

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• iPod 5th generation is frozen and won't cut it

  Plugged my iPod (5th generation) to my MacBook, and where it would normally synchronizes, it froze just to screen 'do not disconnect '. Now, I can't turn it off or restart in any way... Please HEL

  Have you tried this link - Learn how to reset your iPod - Apple Support

  It may be useful

• iPod Touch 5th generation stuck in recovery mode

  I don't see anything on this topic anywhere. However, I "brick" my iPod 5th generation Touch while implementing the update to the 9.2.x the 9.3.1. I held 9.3 as people around me ran into a similar problem with their iPhones, but they were able to recover their phones - just with wiped data.

  My experience:

  1. Received the notice that 9.3.1 was available.
  2. Plug it to my PC and backed up with iTunes.
  3. Downloaded the update via iTunes and begun the process of updating.
  4. Entered my PIN to unlock the device and allow the update.
  5. Update started a few minutes later, I received a notice that it failed and the unit would need to be restored. (Error code was 3014 in my case).
  6. The restoration is only an option "restore and update".

  No matter what you do, the device fails to restore ever.

  The link they send you is useless: https://support.apple.com/en-us/HT201210

  In my case everything was up to date. I restarted the system – several times. Forced on the device reboots. Put it in recovery mode, etc. (https://support.apple.com/en-us/HT201263)

  There is no problem with my hosts (https://support.apple.com/en-us/HT201442) file. I completely disabled my firewall and AV. I had plugged nothing else than the KB and mouse... I even tried from another computer - nothing.

  In fact I never get a real 'Restore' option - always started with restoration, but the next screen has been updated and the restoration.

  I saw a post were actually downgrade iTunes to an older version (for a first generation iPod Touch) solved the issue but I have not yet tried.

  Fix network errors

  Errors: 17, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, 3200. You can also see these alert messages:

  • There was a problem downloading the software.
  • The device is not eligible for the requested build.

  These alerts mean that your computer is either having difficulty contact the Apple update server or connect with your iPhone, iPad or iPod touch. Search your computer for the software or settings that might cause problems of communication between your computer and Apple or between your computer and your device.

  If you still see the error message, check your security software.

  Check your security software

  Errors: 2, 4, 6, 9, 1611, 9006: sometimes security software may prevent your computer to communicate either with the server up to date with your iPhone, iPad or iPod touch or Apple. Check your security software and settings to ensure that they are not blocking a connection to Apple servers.

  If you still see the error message, locate the USB connection problems.

  Check your USB connections

  Errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014. You can also see a message that includes "invalid response". If a USB connection between your iPhone, iPad or iPod touch and your computer is interrupted, you will not be able to update or restore.

  To narrow the problem, try different equipment:

  • Use the USB cable supplied with your device, or another cable USB Apple.
  • Plug your cable into another USB port on your computer. Do not connect on your keyboard.
  • Try another computer.
  • The other problems with the USB connection, then with your security software.

  If you still see the error message, search for hardware problems.

• 5th generation I pod Nano play no music charge from computer

  New iPod Nano plays no music loaded MacBook Pro. When connected by USB, all songs appear on the computer screen in the folder of the Nano, but nothing shows up on Nano when it is disconnected from the computer. Why songs are not displayed on the Nano?

  You load the songs on the iPod using iTunes?  "Record to Nano" sounds like you use Finder to copy the files of songs from iPod directly, rather than using iTunes.  You need to run iTunes and iTunes allows you to manage songs on the iPod.  iTunes stores the files of the song in a special way (when it "syncs" iPod), to optimize the performance of the iPod on its embedded software.

  Just reply to clarify your current situation.  In addition, a 5th generation iPod nano is not NEW.  The current model iPod nano is 7th gen.  What is the model you have?

• AirPort Extreme A1408 (5th generation) low flow on both WiFi and wired

  Hi all

  I have an extreme A1408 Airport (5th generation), which is connected to the internet via a cable UTP (wall plug, the internet provider has its routers in the basement of the apartment building). My plan is to 1000 / 200 MB (down / up - Romanian RCS & RDS, Fib), however, I'm getting averages of 90 / 80 MB speeds on speedtest.net. The best I've ever had was about 180 / 200 Mbps, but that happened once.

  The low speed produce on both WiFi and wired (I have an iMac, a MBP, a 6s iPhone and an iPad Mini that connect through WiFi, on the 5 GHz network and a Mac Mini that is connected to the router), with my wireless devices to full signal strength and connection to 450 Mbps. Since low speeds correspond to the cable wire / WiFi (I expected to the Mac mini to outdo the other, since its on gigabit ethernet), this is not a discussion on how to choose the best channel (I tried auto or manual installation, with it on different channels) or change its placement (this corresponds with the MBP even right next to the router) to get the best reception.

  I tested the connection directly paste the cable in the MBP (via the adapter ethernet of love at first sight) and got 850 / 200 Mbps, then my provider connection works as expected.

  I also changed all cables UTP CAT 5, in order to support gigabit speeds to.

  My AirPort Extreme is on firmware 7.6.4, set up as follows:

  • PPPoE: always on
  • IPv6: link-local
  • Wireless:
    • WPA2 Personal (faster)
    • No network comments
    • the radio 802 mode value. 11A / n - 802.11b/g/n (self)
    • country of Romania
    • tried auto and manual selection of channels 2.4 Ghz and 5 GHz (by analyzing other autour networks)
  • Router mode: DHCP and NAT (NAT Port Mapping Protocol active)

  All iDevices I use are updated to their latest version of the OS.

  Is there something that I am missing? Any ideas?

  Thanks in advance for your time!

  Most likely the problem you see is that Apple has not designed the more practical to work with fiber Internet airport base stations. Although, the 5th generation 802.11n AirPort Extreme can manage, at best, 400 - 500 Mbps of throughput (in bridged mode) via its WAN - LAN interface, you will see about half of this when it is enabled as a router (as yours is.) In addition, if your ISP has their router activated ahead of yours, you can also receive a "Double NAT" error as well.

• Internet keeps disconnect and reconnect every 3 minutes

  Original title: network programs network networking Internet Web site Site Web Web Site URL

  Internet keeps disconnect and reconnect every 3 minutes approximately. I changed the computer so its near the door (the router is in the room) but I never had this problem with my laptop.

  Hello

  1. which version of the Windows operating system is installed on the computer?

  2 did you a recent software or changes to the material on the computer?

  You can go through the steps mentioned in the link and the Coachman.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Linksys AC1900 Smart Wireless keep disconnecting?

  Hello

  • I installed 2 routers AC1900 Linksys and E1200, my Local network is running on AC1900 at least 50-75 devices on the same time.
  • I checked the Modem (Internet connection 24 Mbit/sec dedicated fibre) and works very well, but the AC1900 router keep disconnecting Internet and thanks to my users suffer.
  • I checked all the circumstances of the failure, but not luck. Please guide me.

  The following services are disabled on the router:

  1. Guest access
  2. Parental control
  3. Prioritization of media
  4. Wi - Fi Protected Setup (previously it was ON, but the problem exsits).
  5. MAC filtering
  6. DMZ
  7. DDNS

  The firewall is on, with default rules.

  NOTE: I have 2 connections separate intenert (24 Mbps) for each of the routers.

  Thanks in advance

  for the two of you, which version is your hardware and what version is your firmware? If they are material ver 1.0 so make sure that you use the older version of the firmware that ends with 156465 and not the version which is 158863. This version is only for version 1.1 of the material. You can get the 1.0 version of the linksys web page but remember to select hw 1.0 in order to see it. Once download you the install from the browser page and your abandonment should be better

  You can also disable cut through redirection on the login tab admin page and see if that helps. If please post back and let me know. I want to talk this problem to their guys of dev

• Laptop keeps disconnecting the connection but not others

  I have two laptop computers Toshiba Satellite A300D and A500-13F and a new Linksys WRT120N router. A300D has an Atheros AR9281 wireless network adapter, while A500 has Intel(r) WiFi Link 5100 AGN, and both have Vista 32. It's the A500 which keeps disconnect the connection, it's as if it keeps restarting from the router. It will do this every few minutes and I can't do anything normally on the internet.

  I tried to do something but nothing works. Updating the drivers for the adapter on the A500 does not resolve the issue, although A300D works normally without updates, so there must be something wrong with the adapter on the A500. I also have sellected maximum performance in Power Options > change plan settings > change advanced power settings > wireless card settings, because I read somewhere that energy-efficient settings can interfere with the adapter. I thought that this solution worked until he started to lose and by restoring the link again. Everyone guess what else could be wrong? I generally know how to fix things, but the wifi is a new thing for me and don't know much.

  Yes, in this scenario, this could be the problem with the adapter. Then I suggest that you contact the hardware vendor.

• Why my cable network keep disappearing?

  My network keeps disappearing.

  It works very well for several days, then suddenly it disconnects.

  The network itself works fine and accessible with the help of other computers. The router is OK and works correctly.

  On the Windows 7 computer, however, the network turns off without warning.

  Run the troubleshooter network leads to "no connection is available. But Wired etherenet is available and functioning OK. There is no problem if I remove the cable and plug it into another PC.

  Something on the Windows 7 machine is clearly at fault - but what?

  Hello

  I had already tried in safe mode and the problem persists.

  I have, I think, discovered the issue.

  Automatic update Windows 7 is activated and updated the driver for the network adapter to the latest version.

  When I restore the old version, there is no problem.

  There is clearly an error in the driver for the NIC - a card Realtek PCIe FF. The new driver is the problem - with the old driver, everything is OK.

• I want to install Illustrator on my second computer and it keeps disconnecting. My first computer is turned off

  I want to install Illustrator on my second computer and it keeps disconnecting. My first computer is turned off. I pay package the student since April 2014 and for a year, and I understand that I can get Adobe in two computers at home.

  Thanks for your reply. I pay $ 22 a month package for a year. I just spoke with the help of Adobe, and I solved it they problem. I'm on my second computer. Magali helped me, service excellent customer!

  You are now chatting with 'Magali.

  Magali: Hello. Welcome to Adobe Technical Support.

  Magali: Hi there.

  Magali: Could you please develop your question?

  Magali: Are we still connected?

  Maria V Abreu Valarino: Hi. I want to install Illustrator and some other applications adobe on my second computer and it keeps disconnecting. My first computer is turned off. I registered until I turned it off. I have already downloaded creative cloud, I introduce my user and password and it tells me "you have been disconnected. I pay the student since April 2014 Kit and I'll do it for a year, and I understand that I can get Adobe in up to two computers at home. What should I do?

  Magali: If I understand correctly, you can not connect to the desktop CC application. Is this correct?

  Maria V Abreu Valarino: Yes, in my second computer

  Magali: Thanks for confirming.

  Magali: I'll be happy to help you with this problem.

  Maria V Abreu Valarino: Thanks a lot.

  Magali: Close all adobe applications running including the CC desktop application.

  Magali: You're welcome.

  Maria v Valarino Abreu:

  Magali: Place you C drive and type %LocalAppData% in the address bar and press ENTER.

  Maria v Valarino Abreu:

  Magali: Go to adobe.

  Magali: Go to the OOBE.

  Maria V Valarino Abreu: I don't have a folder under that name.

  Magali: Appointment to the Local and then go to Adobe.

  Maria V Abreu Valarino: ok, I'm in OOBE

  Magali: Then go to opm and remove the opm.

  Magali: May I ask if you are finished?

  Maria V Abreu Valarino: it says that the file is currently in use, does not want to remove it, and CC Office App is not open

  Magali: Launch the Task Manager and click on the "processes" tab and put an end to all the processes associated with adobe, creative cloud and synchronization of the base.

  Maria V Abreu Valarino: done, I deleted the opm

  Magali: Okay.

  Magali: Launch the CC desktop app and try to connect.

  Magali: And tell me if you still get the error?

  Maria V Abreu Valarino: ok, give a second

  Magali: sure.

  Maria V Abreu Valarino: nop, I don't sign

  Magali: I know the error message you get?

  Maria V Valarino Abreu: "logged out".

  Magali: Okay.

  Maria V Valarino Abreu: "you have been disconnected".

  Magali: Can I know if you are in home network or office network?

  Maria V Valarino Abreu: I am a student

  Magali: Okay.

  Maria V Valarino Abreu: I have two computers at home

  Magali: Okay.

  Magali: If please browse the computer and then go to the c drive.

  Magali: Go to windows.

  Maria v Valarino Abreu:

  Magali: Go to System 32

  Magali: Go to drivers.

  Maria V Valarino Abreu: I'm here

  Magali: Then go to etc and find the Hosts file in the etc folder and copy it to the desktop computer.

  Magali: and then open it with Notepad and copy the content and paste it on the chat window.

  Maria V Abreu Valarino: # Copyright (c) 1993-2009 Microsoft Corp. # This is a sample HOSTS file used by Microsoft TCP/IP for Windows. # This file contains the mappings of IP addresses to host names. Each entry # should be kept on an individual line. The IP # must be placed in the first column followed by the corresponding host name. # The IP address and the host name should be separated by at least one space of #. # Additionally, comments (such as these) may be inserted on lines # individual or follows the name of the computer that is designated by a symbol "#". # Example: # 102.54.94.97 rhino.acme.com # source server # 38.25.63.10 x.acme.com # x client name resolution host # localhost is handled within DNS itself. # 127.0.0.1 localhost #: 1 localhost

  Magali: Thanks a lot.

  Magali: Close the hosts file.

  Magali: Launch the internet browser explorer.

  Magali: I know if it is launched?

  Maria V Abreu Valarino: ok

  Magali: Open Internet Explorer > options Internet, click on the tab "connections". In the tab 'Connections', 'LAN' selection settings, you will be able to display the Local network settings. In the LAN settings box, select the checkbox "automatically detect settings".

  Maria v Valarino Abreu:

  Magali: Then "uncheck" all the other boxes as "configuration Script auto use", "Use a proxy server," proxy server "." Click on the ok button and then close the Internet options.

  Maria v Valarino Abreu:

  Magali: Launch the creative Cloud desktop application, try to connect using Adobe ID and password.

  Magali: I know the status?

  Maria V Abreu Valarino: it seems that it is me signing in, yet the blue circle of uoloading

  Magali: Okay.

  Maria V Abreu Valarino: Yes! I'm registered!

  Magali: great!

  Magali: Now, you can go ahead and the CC desktop application allows to install the CC apps.

  Maria V Valarino Abreu: John, you're the best! Thank you very much!!!

  Magali: You're welcome.

  Magali: I'm so happy to hear this from you.

  Magali: Is there anything else I can help you?

  Maria V Abreu Valarino: can I do a survey of your service?

  Magali: You receive an email that will contain a link to complete a survey in option to provide your comments on the experience of the support. Your comments are much appreciated.

  Magali: Her makes me happy to help you.

  Maria V Abreu Valarino: Yes I'll do without a doubt! Thanks again, have a nice day!

  Magali: You're welcome.

  Magali: take care.

  Magali: Please contact Adobe.  We are available 7 days a week, 24 hours a day. Good bye!

  --

  The chat session is over.

  Please contact Adobe.

  This chat session is over.
  Please contact Adobe

• A 2 month old iPod Touch 5th generation began to lose its charge the battery overnight.  East - the developer of a battery issue?

  A "renovated" old 2 months iPod Touch 5th generation just recently started losing its charge the battery during the night.  East - the developer of a battery issue?

  Perhaps. Where did you buy this device?