Network out of range for my HP photosmart C4780

Similar Questions

• "Error 0xBFF69012 attribute value is out of range" for Point Grey Grasshopper2 GS2-GE-50S5M

  Try to get the camera above to work at MAX. Running on LabView 2010 SP1 with Vision Acquisition software August 2010.

  Errors illustrated: error 0xBFF69012 attribute value is out of range

  Camera works perfectly well on the supplied software advanced Grey. Point Grey Image Filter Driver installed. Turned off the Windows Firewall. Card (http://www.sonnettech.com/product/prestogigproec34.html) Ethernet supports Jumbo Frame.

  Read through the following measures without result:

  http://digital.NI.com/public.nsf/allkb/FCE7506A3AF7636C862576240072716D

  http://digital.NI.com/public.nsf/allkb/A0A1CE4704265BF2862578CA007A4CF8

  How will I know if there is a problem with the XML file?

  What are the possibilities that this device is not compatible with IMAQdx?

  Thank you.

  Problem solved in new firmware version 1.25.3 - 00.

  Contact Gray Point to this firmware.

• Photosmart C4780 - prints extra page even after update HP driver

  With the Mavericks (OS X 10.9.4) installed, I noticed that completed print jobs remain in the queue for my HP Photosmart C4780 Safari printing and preview.  If I want to print another (another page), I usually have to remove the previous work (100% full) of the queue so that the printer will print (I think remember that sometimes, with a Google Chrome browser, it is not necessary).  If I close the lid of my MacBook Pro (which goes to sleep) with a completed print job stays in queue HP, it will be then print again for a second time.

  Today, I installed the updated driver, but the problem has not disappeared when I tried to print from Safari and overview.

  HP Print Driver Update critical for printing a foreign page address - 2014-01-31, Version1.0.0, 10.56 M

  Any ideas of how to solve my problem?

  You have an old HP software in your Applications folder, which was the Mavericks before OS?

  In the meantime, download and install this: http://support.apple.com/kb/DL907
  
  Restart your Mac.

  Reset the printing system:
  
  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• HP Photosmart C4780: problems to reinstall my printer.

  My computer (Windows 7, 64-bit) showed that I had a major update for my printer (Photosmart C4780) HP. I installed the update, but it failed near the end. Thus, the Installer removed all printer software because it has not ended.

  I tried to re - install this printer all day, but no matter what it will fail because no driver was found, even if I download it directly from the Web site: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3794...

  After that, I get a "fatal error", which causes the interruption of installation, then uninstall all the software again.

  I followed the advice on the support pages and remain to be resolved this problem. I've also included pictures of mistakes just in case it is useful:

  No driver found: http://i.imgur.com/t5suTFj.png

  Fatal error: http://i.imgur.com/3wblqLe.png

  If anyone has any suggestions, it would be greatly appreciated.

  I don't know what I did differently this time, but I finally got this printer to install. I wish I could give a better solution in case others are facing a similar problem. However, I honestly have nothing to say apart from all uninstall and install and then again using the HP printer Installation Wizard.

• Error Unc.Exception for blackBerry 8310 Curve Smartphones: string index out of range: 0

  I get the following error message: "Eception Exception: string index out of range: 0" and no way to clear the message.

  Could someone help me to fix it? In fact, the only way to get the BB 8310 back to work is the battery.

  Thanks adavance

  You continue to misinterpret the contractual agreement for the support that YOU are bound to. You should contact your mobile service provider who can escalate your case RIM, how the ability to submit the report could well exist.

  All this debate aside courses... 9 times out of 10 if people just try some things in my first response, it solves their problems... normally a clean OS Reload did the trick as a "worst case"... that or update the operating system to something more current.

• Photosmart C4780 installation fails to Select network

  Printer model: Photosmart C4780

  Operating systems: Mac OS 10.5 and 10.6

  Method of connection: USB

  Wireless network: Time Capsule from Apple (802.11b/g/n) and Apple AirPort Extreme (802. 11 b / g) with WPA/WPA2 Personal security and local access control (MAC filtering)

  Problem: Try to set up a new C4780, I installed the software on three computers HP run two versions of Mac OS X.  I placed the C4780 next to two different base in the AirPort network stations.  I have the MAC address of the C4780 in each base in white list stations.  I tried also turn off all the access control and all the network wireless encryption/security (briefly).  I even tried to connect to my neighbor networks.  In all cases, the C4780 was connected to the computer via the USB port and the HP installation wizard has been run.  'Select Network' page, the list shows both of my base stations (with the same SSID) as well as two networks in neighbouring houses.  Any network is selected, the process "in search for the network" succeeds forever.  On some attempts, a dialog box shows the network is out of range (even if the base station is the printer inches), but most of the time the "network search" process runs indefinitely.  I looked in the newspapers of the two my network of base stations and found no attempt to connect from the MAC address of the C4780.  Light on the C4780 Control Panel indicates that the wi - fi radio is on.

  I don't see any explanation other than a faulty radio in the C4780.  Any other ideas?  Thank you.

  I don't know why you have two airports and if they are configured to play well with each other, but...

  We will use the WPS from your printer and 8 function:

  Start the WPS process from the front panel of your printer (network menu). Then:

  Open Apple Airport utility
  Select your wireless router
  Select Manual Configuration
  choose Add Wireless Clients... in the menu of the Base Station
  Select the first attempt, and then press to continue.
  You must begin the process of Apple Add Wireless customer within 2 minutes of starting the printer WPS push button method. In fact, the order doesn't matter... you can start the process of adding on the Apple start router Wireless Clients then method push-button WPS printer.

  Your printer will now be connected to your router. Now all you have to do is install the printer in System Preferences, Print & Fax by clicking on the button «+» Find the instance of your printer with "Hello" next to it and click "Add" when it becomes available. "

• Once I connect my Photosmart C4780 to my wireless network, I lose everything internet.

  My router is a Netgear WNDR3700v3 with firmware version V1.0.0.22_1.0.17.  I can get internet to work on my HP pavilion dv7 with windows 7 64 bit, my smart sony TV, my xbox 360 and a phone that I connect to my wireless router.  The second, I configured my HP Photosmart C4780 wireless router I lose internet on all devices.  I can connect to the router again but can't get out to the internet. What would be the printer could prevent me from accessing internet?

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Monitors flicker and "Input Signal Out of Range"

  Hello!

  I have a Mac Mini (end 2012) 2.3 GHz Intel core i7 running up-to-date El Capitan, with two HP monitors 2071d.

  These monitors have DVI connections. It is connected with Mini DisplayPort to DVI adapter, and the other with HDMI to DVI adapter (provided with the Mac Mini).

  Everything has been fine for a year until this week. Two monitors are:

  (1) intermitantly began flickering of the scrambled images

  (2) flickering intermittently at black or white noise

  (3) intermittently flickering white noise

  (4) the message of the form 'input out of range Signal. 1600 x 900 at 60 Hz settings."

  How is this problem go and come, but rather continues today.

  After research, I tried to start safe mode, but the problem persists.

  I read that put the computer to sleep and then wake up could solve this problem... it worked a

  couple of times, but the issue soon returned.

  I tried to reset several times VRAM/LANDAU and SMC.

  I doubled checked all the connections.

  Under the system of preferences > display (when the image is stable long enough for me to see) everything looks OK. Under the screen of the 'Default display' tab is selected. On the color tab, there are three HP2071d listed (with a selected) in the window display profiles. I've linked by selecting one of the other "HP2071d" listed without noticeable change.

  I also reset both monitors to factory settings via the menu screen of the monitors.

  I also came across this mini Mac EFI Firmware Update 1.7 for flickering on end of 2012 Mac Minis, but when I tried to run I got "this software don't is not supported on your system. Ugh. It turns out that my Mac Mini is already updated to MM61.0106.B0A (2015-002)

  My Information System > Hardware > graphics/display info is:

  Graphics Intel HD 4000:

  Chipset model: Intel HD Graphics 4000

  Type: GPU

  Bus: integrated

  VRAM (dynamic, Max): 1536 MB

  Seller: Intel (0 x 8086)

  Device ID: 0 x 0166

  Revision ID: 0 x 0009

  Exhibition:

  HP W2071d:

  Resolution: 1600 x 900 at 60 Hz

  Per pixel: 32-bit color (ARGB8888)

  Display serial number: 6CM3171PFF

  Mirror: on

  State of the mirror: mirror material

  Online: Yes

  Rotation: support

  HP W2071d:

  Resolution: 1600 x 900 at 60 Hz

  Per pixel: 32-bit color (ARGB8888)

  Display serial number: 6CM3170P31

  Main screen: Yes

  Mirror: on

  State of the mirror: mirror of Master

  Online: Yes

  Rotation: support

  I am of the ideas of what else to check/try.

  Thanks for any assistance that anyone can provide.

  bdcs64 wrote:

  Hello!

  I have a Mac Mini (end 2012) 2.3 GHz Intel core i7 running up-to-date El Capitan, with two HP monitors 2071d.

  These monitors have DVI connections. It is connected with Mini DisplayPort to DVI adapter, and the other with HDMI to DVI adapter (provided with the Mac Mini).

  Quite the same configuration except here, with 2 Samsung S22B310 DVI monitors on an i5 2.5 GHz in late 2012.

  Everything has been fine for a year until this week. Two monitors are:

  (1) intermitantly began flickering of the scrambled images

  (2) flickering intermittently at black or white noise

  (3) intermittently flickering white noise

  (4) the message of the form 'input out of range Signal. 1600 x 900 at 60 Hz settings."

  How is this problem go and come, but rather continues today.

  Both monitors isn't good. Which would lead us to think that the Intel HD 4000 is overheating and the problem is not with any of the adapters or cables. Although, if one of the cards was not internally, it could put additional heat stress on the graphics chip.

  Personally, I will try a few things.

  1. turn off, unplug everything, open the bottom cover and give it a good cleaning to make sure it cools properly.

  https://www.iFixit.com/device/Mac_Mini_Late_2012

  2. try each monitor individually for awhile configurations see if the problem follows the monitor cable adapter installation.

  (I know he'll be a brake after obtaining used monitors to double)

  3. try using > MacFanControl to monitor and help control the temperature of the GPU ITPP.

  http://www.CrystalIDEA.com/Macs-fan-control

  FWIW, I do not use screensavers, but I do a lot of videos as well as some games of light on both my 2010 and 2012 of the Mini and I really believe that MacFanControl has really helped to extend the life of graphics on these two systems.

  I use the control based on the sensors on the sensor of GPU ITPP and configured so that it starts slowly rise in power of the fan above 129' F

  

• HP 2509 b monitor guard displaying "Input Signal Out of Range" and then go to sleep.

  I went on vacation and shutdown my computer for 2 weeks.  My monitor worked great for a month before.  I came home last night and turned on my system this morning.  Now I get a white message in the middle of the screen with "input out of range Signal. Change the settings for 1920 x 1080 at 60 Hz"and then the screen goes to sleep.  I can turn the monitor off, wait a moment and then turn it back on again, but continues to repeat the same thing.  I checked and the screen is already set to 1920 x 1080 at 60 Hz.  I use VGA and have the default positioned like this.  I followed the guide to troubleshooting online for this error, but it did not help.  Can someone tell me please how to fix this?

  Finally, I got this figured out!  Here's what I did.

  Control Panel

  Display

  Parameters

  Advanced

  Intel(r) Graphics Media Accelerator Driver

  Graphics properties

  Display settings

  Expansion of the display

  Chosen at this stage full screen (no border) instead of "maintain proportions"

  As soon as I put this the error screen disappeared!  Can someone explain to me why this adjustment has been around?  I would like to know.

  Thank you all for your help.

• Unable to connect PS 2 to tToshiba 19W330DB TV - "out of range" msg

  PlayStation 2 for as much as I know only need the ypbpr lead to connect to the TV.
  I have connected the audio cables very well, but when it comes to connecting the video cable (yellow), it seems to be wrong.

  When you turn the console on the initial screen for playstation comes in black and white.
  The screen flashes then a little and the message 'out of range' appears.

  Someone at - it ideas on how to connect?

  Hello Laura

  Please don't be crazy on me, but this is the support forum for the Toshiba COMPUTER system. If you have connection problems Playstation 2 I recommend you contact the manufacturer of the Playstation support. They know how to manage with own product.

• The IVI Drivers: RangeCheck of initialization option set to true: failed to get an out-of-range error

  Hello

  I'm new to IVI drivers (started using them last week) and I have a problem with the option of initializing RangeCheck.

  So get used to the IVI drivers, I used the example provided with the AgilentE36xx IVI - COM driver (on my computer, it is located in C:\Program Files\IVI Foundation\IVI\Drivers\AgE36xx\Examples\VS.NET\Cpp\Example1).

  I could do everything I wanted except get an error out-of-range, during the passage of an out-of-range value to a function. I put the RangeCheck init option to true, but I don't have any error in the simulation, nor with the connected equipment.

  Attached is the code (from the example of Agilent) but modified so that it should throw an out-of-range error when adjusting the tension on the following line: spOutput1-> VoltageLevel = 1000; ... why no error.

  Still, it runs correctly. Can someone tell me what I'm not doing correctly.

  Kind regards

  Roman

  Hello

  I posted the question on the Forum of Agilent.

  Here is the link to the post: http://www.home.agilent.com/owc_discussions/thread.jspa?threadID=33348&tstart=0

  The problem is now resolved. Thank you for your help.

  Kind regards

  Roman

• Cannot connect my Photosmart C4780 to my network wireless (home)

  Hello

  I searched this forum and tried to solve my problem, but none of the elaborate suggestions.

  I have a Photosmart C4780 and am under OSX10.8

  Recently, our internet provider changed our wireless router and our SSID. As a result, the printer that is connected to the original network and properly functioning has stopped working. I tried to connect the printer to the new network, but failed. He said now that the printer is connected to the hp network (something) and I can't change it for the new SSID.

  Could you please tell me what to do? I have installed the software mentioned in the HP website, plugged the USB cable into the printer to try to set it up, but it says that the printer cannot find any existing network (although I'm next to the printer and connected to the intended network wireless)

  Fact a little kind of hard-reset on the printer can be a good strategy? How can he do?

  Thanks in advance

  Pedro

  PS: The printer works correctly when printing via USB

  PS2: It is not an option to return the SSID of the router to the previous

  Hi @pedroa

  You say "I have installed the software mentioned in the HP website", but there is no software for the compatible with 10.8 c4780. Mountain V10.8 OS X Lion: installing and using the printer on a Mac with the Mountain Lion.

  As you know, this printer has not a wizard wireless version in the front panel instead us would typically connect the USB cable from the printer to the computer and run the installation wizard.

  Because you have 10.8 on Mac, and it there is no full feature software and drivers, you won't be the configuration wizard, to configure the printer. You may be wondering now, well how can I set up then?  Good question, we will restore the default network printers and the printer will have its own IP address designed for whats called an Ad-Hoc connection (wireless router). We will put the computer on the network printer and then print a report to get the printers IP address. At this point, we can access the built-in web server (EWS) and run the wireless from there. Once the printer on the network with the router, we can put the computer on the network and vuala that the printer and the computer will be on your network.

  To restore the default network settings - since you have done this before I guess you know how, but for others who can see the message, here are the steps

  1. Press the wireless button
  2. Select wireless settings
  3. Scroll and select default network.  Press Yes to recognize
  4. The radio turns off (the blue LED turns off).  You may need to press the wireless button to turn on wireless

  Put the computer on the network printer (temporary)

  1. click on the symbol of the airport on the upper left side of the screen Mac
  2. choose the network looking compared to the printer (we could say a variant of the name of your printer or HP setup) - it may take a few minutes to make it appear

  Print the wireless network test - wait a few minutes to make sure the computer have established an ad hoc connection, otherwise the report will not have an IP address

  1. Press the Scan button (it also the wireless menu button)
  2. Select wireless settings
  3. Testing wireless access, then select.

  The wireless network Test prints, search and note the IP address.

  Open a browser (Safari) and enter the IP address in the URL (address bar).

  Click on the network, on the left tab, click on wireless or 802.11.

  At this point, we are looking at fore 'start the wizard' should be on the right side.

  

  As soon as we will have to set up the printer to your network, you can put your computer on your own network.

  Now you can add the printer in system preferences and print

  Please let me know if that fixes the problem, thanks.

• Prosilica GigE GC650C error 0xBFF69012 attribute value is out of range

  Hi all

  I had been using a GigE Prosilica GC650 of camera on a target real time with no problems. Today I tried to connect the camera to the MAX and I get the above error. I have read every thread I could find about this error and have tried the following with no luck...

  -Deletion of files xml, iid and CIM with the camera disconnected and non-powered

  -Update the firmware of the device to 1.36

  -Repair OR-IMAQ 4.3 installation

  -OR-IMAQdx 3.4 repair facility

  The Prosilica camera viewer works very well. Another oddity, it's the same device works fine in the same version of MAX on another computer with hardware counterpart. This computer has versions of the same software (Labview 2009, IMAQ, etc.) to the problem machine.

  I have not installed software or updated between the time when the camera was working and now (about 1 week).

  Any ideas would be greatly appreciated!

  Chris

  Hi Chris,

  The only thing I can think of is to check the link speed. I think that some of the attributes on the Prosilicas go out of range, when they are connected to 100Mbit instead of 1 Gbit. Check that the interface of the camera card and the network show a gigabit link. Maybe you have a bad cable which is originally the link down to speed.

  If this does not help, let me know and I can try suggesting other things we can try.

  Eric

• "Frequency out of range".

  After launching a game, my computer has been changed, (I think) 1600 x 1200. Of course, it's too much for my monitor to manage, so the screen becomes black, and it is written in a blue box "frequency out of range". (and the box bounces around the screen making fun of me.) If I try to restart windows, it won't happen again, so I have to restart in safe mode. I can't change my resolution in safe mode, and if I try to switch to normal mode to change it I get ""frequency out of range,"and I don't see what buttons press.»

  BTW, sorry for the bad grammar

  --------------------

• input out of range with HDMI to VGA LE1901w

  Hello!

  Recently, I acquired a LE1901w monitor as a second screen. I'm trying to connect it to my Toshiba u925 using adapters HDMI / VGA (because neither the monitor has an HDMI port, or the laptop has a VGA output).

  I get the message "input out of range signal" requesting a change to 1440 x 920 @ 60 Hz and continues to display until the monitor going to sleep even when I change the settings according to demand.

  I have an integrated Intel HD Graphics 4000 and I use the default Windows for Windows 8.1 monitor drivers

  Any comments will be useful

  Thank you

  Hello @fbinim,

  I understand that you get the message "Input Signal Out Of Range" and it asks you to change at 1440 x 920 @ 60 Hz. I suspect it's a driver problem and you need to make sure that your drivers are up to date on your computer. Just to be safe, I recommend if you could to move the HP LE1901W monitor to another computer and make sure you do not have the problem. If you have it on a different computer the problem you are experiencing seems to be a physical problem. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.

  I want to thank you for display on the HP Forums. Have a great day!