network set up

Similar Questions

• Which network setting is better and safer. private or public?

  original title: network settimg

  which network setting is better and safer. private or public?

  HI Margaret,.

  You can read the following article to learn more.

  Choose a network location

  See also:

  Setting up a network home

  Setting up a wireless network

• Operation error 0 x 00000709 might not be compled, check the name of the printer and make sure printer connect to network - set the default printer

  PRINTER IS SHARED ON THE NETWORK AND YOU WANT TO SET AS THE DEFAULT PRINTER...

  My Hp Deskjet 3550 Printer I have server with Windows 7 32-bit, 64-bit client

  I was first installed the printer in my client and work and shared what this wireless client PC...

  more later connected (shifted) this printer to the server and shared and want to access the client, now client pc has two settings of the printer, 1 direct connect 1 network share and I want to set default network setting... but displays error 0 x 00000709 as above. (successful print test)

  Print network image printer is displayed,

  but print the word, excel, pdf just placed directly the visible with fax and xps viewer.

  -default even impossible to define to the xps Viewer or by fax.

  Please suggest me the way out?

  Hi Amit,

  I suggest you to send your request in the TechNet Forums to improve assistance in this regard. Here is the link: http://social.technet.microsoft.com/Forums/en-US/home?category=w7itpro&filter=alltypes&sort=lastpostdesc

  It will be useful.

• Wath is real network setting for webscan with crossover cable?

  Hello everyone

  I have a problem with webscan.

  I have two desktop who are networked with a "crossover" cable one of these computers have two network port I connect my hp 6500 all-in-on with another "crossover cable" to a different port on this computer network.

  my setup ip in computer "1" with the port of two networks:

  192.168.0.1 ===> to connect to another computer

  169.254.199.1 ===> to connect to hp 6500

  my setting ip to the '2' with a single port network computer:

  192.168.0.2

  my hp 6500 ip setting:

  169.254.199.140

  computer 1 can find computer 2 and hp 6500. and 2 computer will find computer 1 but the problem here is that 'the computer '2' is not hp 6500 ".

  Help, please.

  If we don't want my network setting, that is - that's right.

  Note: both my os is windows xp.

  I apologize for my bad English.

  Have you tried to manually configure the IP 192.168.0.3 printer?

  You must also put the printer subnet mask to 255.255.255.0

  Which should allow the computer 1 routes IP printer to computer 2 packets (as computer 1 is turned on and the computer 1 provides routing between ethernet ports).

  It's worth a try.

• Domestic network setting issue

  I have 3 computers in my home dell, two laptops and a desktop computer.  The communication Portal is in my office where I have ethernet connected to the router, and the other two PCs to communicate wirelessly.  All computers connect to the internet, no problem.  Thus, connectivity is very good.

  I'm trying to these computers to share files and network printers and can't seem to get this to work.  All machines are running XP and I've run the Network Setup Wizard.  I tried several options, but none of the machines recognize each other.  I look at the router and see the connected devices and IP addresses, but machines can only ping their own address.

  I set up the network with a residential gateway and all machines show that on network connections.  But, not finding what I'm doing wrong here in getting these machines to talk to each other.  Anyone have any ideas?

  
  

• printer hp officejet pro 8610: new HP Officejet Pro 8610 Plus router network setting locked by admin impossible to reconfigure

  need to change the network settings on officejet pro 8610 more printer but locked by admin settings. Also, I have printed the network configuration page but could not open http://192.168.223.1with browser, connection has expired.  Help, please.

  Hi kimvb,

  Thanks for joining the forum to Support HP for a solution to your problem.

  I understand that you have a HP Officejet Pro 8610 e-all-in-one printer you need to change the network settings on but you can't because it has locked by admin and also, you can not access the Servicer (EWS) Web embedded with the IP address of the printer. I would like to help with that.

  There is a stain on the integrated Web server that you can join the admin settings, but if you are unable to access the built-in Web server with the IP address of the printer there is another way may work around this problem.

  I'll send you a (PM) private Message with reset information that can help. If you are unsure how to check your PMs, click here.

  Please click the "accept as Solution" and the "thumbs up" button up on top of my first response above and other similar issues may find the easiest solution.

• Why the window asking if I want to make my new network domestic or public when I already a network set up. My original network now has a 2 square brackets also.

  I left my computer for my magic jack so I can receive calls.   When I woke in the morning, there were two open windows.   One was the new network

  window and the other was the window asking if I wanted to do a home network or public.   Does that mean someone hacked my computer?

  The fact that my network connection now has a (2) beside it means I have now two netowrk connections runinning.

  The system seems much slower and takes about 10 seconds to respond to the movements of the mouse if it has been sitting for awhile.

  Help, please

  Computer illiterate fool

  2 hooks would duplicate and feel safe to remove.

  If this is not the case, of course, run a spyware scan online TrendMicro Housecalls.

  http://housecall.trendmicro.com/

  I would contact Magic Jack support with this issue

  http://www.magicjacksupport.com/

• Updates destroy virtual network setting

  When will stop destroying my definitions of virtual network, whenever I update VMware Workstation? I have four physical interfaces on 3 physically different networks. Whenever I update the workstation, I have to rebuild my virtual network EVERY TIME!

  I would like to talk to the idiot in charge of this design decision making.

  Brian Nelson

  the only parameters that are preserved during an upgrade are the beaches of network for vmnet1 and vmnet8.

  If you want to keep the settings more - as the gateways, bridge-settings or so now you need to do it yourself

  You will store bridge-the key export settings

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\VMnetBridge\Parameters\Adapters

  To keep the walkways, the parameters for the vmnets use netshell commands

  ___________________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• 50 Sage accountants network set up

  Program was installed by Team Member Support of wise after the connection to my computer after putting in place failed. While I was absent the installation has been completed but the Sage icon has not been installed and now program does not open. I need to work to program, but may not work because it does not open.

  Rashmi Patel

  Hello

  Sage 50 not being a Microsoft product, you should seek the assistance of Sage 50 or the employee, team, contractor who installed the program.

  Don

• WIndows 7 and Server 2008 machines won't remember preferences of network discovery, needs to set every time you start up or wake up.

  Hello

  I was wondering if anyone here could be kind enough to help me solve this situation

  I have two machines Windows 7 and Server 2008 machines remember preferences of network discovery.

  I use the software on the windows server that collects data and information to two windows 7 machines and discover the network is necessary for this purpose

  These machines are set up in an autonomous local network set up as a working group the only other points on the network are none based on PC hardware that fortunately, the server communicates with and reads the data of

  Once network discovery is defined for the network, the system works as expected, but on each startup (or wake up) network discovery is lost and need to be authorized. This is the case at the time windows server 20008 r2 and windows 7

  How can I make these permanent preferences. for that it restarts and re establish communication its self without intervention

  am I missing a setting or if not is there a way I can script the selection preference on each start (/wake) upwards.

  the end user must be able to turn on the system / restart and use it with needing to have any IT / networking of knowledge to the outside to get the system running.

  Thank you for taking the time to read my request

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Try to set up a home network on XP but the router has no USB to connect to.

  I went to set up a home network and immediately floored that the network set up wizard asks me a USB port in my router and my router does not have one.
  Can someone help me with this you problem?
  I also have a PC, main one running W7 so how possibly configure it as well please?

  Hi DerekJudd,

  1. What is the exact error message you are getting?

  You can view the following items and see if it helps.

  How to troubleshoot a network home in Windows XP

  http://support.Microsoft.com/kb/813936

  You can also read the following article and see if it helps:

  How to set up a small network with Windows XP Home Edition (PART 1)

  Hope this information is useful.

• Set the network settings on Coredump PowerCLI problem

  I want to use PowerCLI to set my 5.0 vSphere hosts so that they make a coredump on my server vCenter. I have a vCenter server with the installed Dump ESXi collector installation. I am familiar with the help of the CLI and the local RCLI to set these parameters, but I want to use PowerCLI.

  I have a variable called $esxcli. $esxcli = get-EsxCli - VMHost host1

  Then $esxcli.system.coredump.network , we get the following:

  PowerCLI C:\ > $esxcli.system.coredump.network

  ===============================
  EsxCliElement: coredump.network

  Methods:
  --------
  NetworkCoredump get()
  the Boolean (Boolean enable, string interfacename, string serveripv4, long serverport)

  If I try to use the set command I get a 500 error internal server error. See the following topics:

  PowerCLI C:\ > $esxcli.system.coredump.network.set(1,"vmk0","192.168.1.220",6500)
  The remote server returned an error: (500) internal server error.
  On line: 1 char: 36
  + $esxcli.system.coredump.network.set < < < < (1, 'vmk0', "192.168.1.220", 6500)
  + CategoryInfo: InvalidOperation: (:)) [], RuntimeException)
  + FullyQualifiedErrorId: MethodInvocationException

  I tried to put the port number quoted as citations in withdrawal of all fields, and it always returns the same error.

  I gave in and used the vMA to set the parameters on the hosts. When I run the command $esxcli.system.coredump.network.get () I see the parameters as I entered. I am also able to use $esxcli.system.coredump.network.set (1) or $esxcli.system.coredump.network.set (0) which turns on or off the coredump of network function. However, I wish I could use PowerCLI to set all settings and activate the function.

  This definition with the local esxcli command syntax is listed here at the following link. There first we define the interface, the server IP and port number. Once these parameters are defined, then we use another command to activate the function.

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC & docType = kc & docTypeID = DT_KB_1_1 & externalId = 2002955

  To set up using ESXCLI:
  1. Open a console on the ESXi, the vMA host or another session where the vCLI is installed.
     
  2. Consider the current configuration using this command:
     esxcli system coredump network get
     Specify the VMkernel network interface to use for outbound traffic and the IP address and the port number the coredump remote network by using this command server UDP:
     esxcli system coredump network set --interface-name <VMkernelInterface> --server-ipv4 <IPAddress> --server-port PortNumber
     
     Example:
     esxcli system coredump network set --interface-name vmk0 --server-ipv4 10.11.12.13 --server-port 6500
     
  3. Activate the coredump of network configuration by using this command:
     esxcli system coredump network set --enable true
     
  4. Review and confirm the configuration by using this command:
     esxcli system coredump network get
     

  Any help with this would be greatly appreciated. I love using PowerCLI doing automated generation and keep my consitent configurations. Many of my clients do not use Enterprise + if we cannot use the host profiles.

  Thanks again.

  Andrew

  Hello.

  This work of code for me:

  $esxcli.system.coredump.network.set ($null, 'vmk0', '192.168.22.250', 6500)
  $esxcli.system.coredump.network.set (1)
  $esxcli.system.coredump.network.get)

• iPADs repeat network WPA2 Enterprise authentication

  Hi all

  I have the following problem with our network wireless company. We are able to connect to our network wireless with iPad and iPhone successfully.

  But with the iPad when you leave the office and come back a few hours later he asks for to re-authenticate to having to type your user name and password again. But with the iPhone it will automatically reconnect to the wireless network. Is there a difference between the iPad and the iPhone on that are used for example ms-chapV2 or PEAP authentication methods?

  If you get out of the office for about 20 minutes and then the IPADS don't ask no username and password it auto connects, it would seem that there is a time limit, or something.

  We use the controller wireless AP and cisco with radius server 2012R Server

  Any help would be greatly appreciated.

  The Unit requests access to the network when a user selects an available wireless network or the device detects a network set up previously. 2 when the access point receives the request, it forwards the request to the RADIUS authentication for the authentication server. 3 the RADIUS server uses directory services to validate the user account. 4 once the user is authenticated, the access point provides access network with policies and permissions, as shown by the RADIUS server

  Training of AWS in Chennai | Formation of Informatica in Chennai | Training for Hadoop in Chennai

• Airport Extreme network orientation parameters

  Here is our network (diagram below) configuration:

  Internet is available through a pass by modem cable to the Sonic Wall set with a static IP address. The wall of sound, we have a port to a point of cradle that is not with a static IP and gives on a totally different range of the IPS via DHCP to our POS. Another port of the Sonic Wall, I had going to the WAN port on our new airport extreme. I have a switch with some control machines connected to the Airport extreme via an ethernet cable. All devices connected via wifi or hard cable with Airport extreme are placed for IPS via DHCP.

  I am trying to configure parameters on a new device extreme airport our Wi - Fi to my company. We recently had some problems of internet connectivity for a minute or two at a time and I wonder if it could be some sort of conflict of IP address or if it was just a failure of the internet that did not affect the status of the modem lights cable (all were green = connected). Brief history: the most extreme airport on a port of our Sonic wall with the airport extreme is default DHCP and NAT (he gave me the orange light, and he suggested that I put it in Bridge mode). Internet in all of our network seemed to work very well, so I just left it alone.

  30 days later we have a brief interruption in internet connectivity with our credit card processing POS two days in a row for a minute or two of. After the second case, we shut down the extreme airport just in case that was causing our problem. I had a technician COMPUTER down and he suggested I put the airport with a static IP (x.x.7.80) outside the range of IP addresses of our wall router Sonic DHCP-range (let's say it was x.x.7.100 - x.x.7.252) he has been giving and then configured the network settings for DHCP LAN only Airport (I used x.x.7.10 - x.x.7.70) with a range that doesn't overlap the IP of the Sonic Wall range. Part of the confusion, I had during the configuration of the airport was if I needed to plug in our Sonic Wall static IP address in the 'router' address and if I needed to use the DNS servers that appeared in the Sonic Wall settings (I thought he was shooting at those of the cable company). After you make these changes, I got a green light on the airport and the connection was working fine when tested. The next day, we had another interruption of connectivity where our treatment card and internet from WIFI got interrupted. I unplugged the power of WIFI and it seemed that our POS network has begun to process cards normally again.

  The point side cradle of the network is to grasp what IP the sonic wall gives him and give the address on a completely different system that is used in the other part of the network. Another question would be if I can just put the Airport extreme to DHCP mode under the 'Internet' parameter and go to the bridge on "Network" setting Mode I don't know how the bridge Mode would affect our network. I'm not wanting to do anything on the side POS (point of cradle) which is rather difficult with someone like me who is not an expert. Any thoughts are appreciated to help me resolve this issue.

  

  Brief history: the most extreme airport on a port of our Sonic wall with the airport extreme is default DHCP and NAT (he gave me the orange light, and he suggested that I put it in Bridge mode). Internet in all of our network seemed to work very well, so I just left it alone.

  There are two schools of thought on this.  The traditional method (better, in my opinion) would have the AirPort Extreme, put in place in Bridge Mode... Since you already have another router... (the Sonic Wall device which is upstream of your network)... providing routing services.

  Although you might be able to make a network work well with two different devices acting both as of the routers on the network, it complicates things, adds another firewall to the network, and also produces a base called Double NAT network error.

  Sometimes you can get away with a Double NAT error on a simple network, but the double layers of NAT may cause some unpredictable problems. The usual problem is slower navigation, or you will not be able to access some Web sites.  Network devices may not communicate reliably, or communicate at all in some cases.

  This is why Apple software configuration you advise to set up AirPort Extreme in bridge... Mode to fix the Double NAT error. This type of configuration simplifies your network... Since one device will put a router... not two.

  In recent years in particular, we have seen some tips on forums that goes against the rules of traditional networking.  These people that it is OK to have two devices both try to act as routers to the same network... and to 'ignore' the Double NAT error on the network.

  It's interesting tips, since the Apple software advises you avoid having a Double NAT on the network... and some advanced features like Back to My Mac specifically Apple advise to avoid a Double NAT error on the network.  If you have a console online game and you want to play interactively on Internet, you already know that a Double NAT error will not allow this.

  My suggestion would be so... If you have not already tried it... to set up the AirPort Extreme in Bridge Mode.  Apple calls this setting off (Bridge Mode)... which simply means that routing services are turned 'Off' Mode bridge.

  You can still assign a static to AirPort Extreme IP address, if you want, but the devices that are connected to the AirPort Extreme will receive the Sonic Wall router network IP addresses... Since the airport acts as a simple device to "go" when he returns and in Bridge Mode.

• Impossible to extend the AirPort Extreme wireless network

  I have a wireless network set up with a time Capsule airport 4th generation.  I'm trying to take my old AirPort Extreme wireless 3rd generation. I have double. Kettle has implemented, but I get the status message on the extreme that it cannot extend the network.  I can get a strong signal on my iPhone from the point that I have placed extreme itching so I'm close enough to the time Capsule.

  Could I use a connection by current bearer through my home wiring to the extreme and extend it like that?

  Does anyone have any suggestions?

  Please follow these steps closely and report on your results.

  Power off time Capsule airport.

  Wait 10 to 15 seconds

  Power up Time Capsule airport

  Reset the AirPort Extreme back to default factory

  Set up AirPort Extreme still extend wireless signal of the time Capsule

  Report on the results