New printer problems

Similar Questions

• laptop computer new printing problems

  My new laptop will not print in color when you use a network - any ideas on how to fix printer Xerox Phaser 6250 DP

  Hello

  1. What is the operating system installed on the computer?

  2 are you facing issue to print a document from the internet or all documents?

  Method 1 : install printer drivers and check whether the problem is resolved

  http://www.support.Xerox.com/support/Phaser-6250/downloads/enus.html?OperatingSystem=Win7

  Method 2 : perform the steps in the article and check if the problem is solved or not.

  I can't print or preview before printing a Web page in Internet Explorer

  Method 3 : run the troubleshooter and check if the problem is solved or not.

  Open the printer Troubleshooter

  Method 4 : check the following article

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Method 5 : install the drivers

  Updated a hardware driver that is not working properly

  Hope that helps.

• New printing problems 2540 - lack of lines

  Hello

  I just bought a printer 2540 and installed, but it lacks at least all other lines when printing and I get horizontal stripes.  I went through the process of alignment and cleaning the heads, but it's actually got worse not better.

  I am running Windows 7

  Hello Johanna2014,

  Welcome to the HP Forums.

  I see that you have a problem with the lines and scratches on your print jobs.  I would like to make a few steps, we can go to solve this problem.

  First of all, please make sure that you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  I also find a document called the streaks of ink, fixing faded prints and other common print quality problems.

  Please feel free to write back if you have any questions or concerns.

  See you soon,.

• OfficeJet 4630: Install new printer - ink cartridge problem

  I'll put up a new HP Officejet 4630. I installed two cartridges of HP61 that came with the new printer. The menu of the poster printer "ink cartridge problem, the following ink cartridge needs to be replaced" followed by a black circle. How a new cartridge would be acceptable?

  Follow-up of your steps. Cartridges still a problem in the printer display.  Took printer at Staples. The store manager confirmed my status then loaded 2 new cartridges (free) the sales basket - printer worked.  Staples deals custormers good!

• HP Office Jet Pro 8720: Problem set up and launch the new printer & ink cartridge installation

  Two questions:
  First... it takes a LONG time for the computer to open itself.
  Then, when he did initiate... I opened the section of ink cartridge
  to install the ink & transport of ink would not come to the Center.
  SO... I stopped the printer to start again... and now, the
  screen has a spinning wheel indicating "cartridges controls."
  It lasts for more than half an hour.
  HELP... This is a new printer & I can't open.
  Thank you kindly.

  Hi @paulallah,

  Thanks for joining the Forums of HP Support for a solution to your printer problem.

  I understand that you have a printer of HP all-in-one OfficeJet Pro 8720 which took a long time to initialize and is now stuck in a mode 'check' cartridges after the reboot it because transport would not move to the Center. I would like to help with that.

  I would start by doing a Reset of the power on the printer.

  

  If that fails to solve the problem, you might want to speak with HP Technical Support as there may be a hardware problem.

  You mentioned that you are using a Mac running OS X 10.5 Leopard or more. The HP all-in-one OfficeJet Pro 8720 printer is only compatible with Mac OS X 10.7 Lion or later.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• I am trying to install a new printer, but I get "due to an unidentified problem, Windows cannot display Windows Firewall settings? Can anyone help?

  I am trying to install a new printer, and to do that I know I have to disable firewall settings. I try, but I get "due to an unidentified problem, Windows cannot display Windows Firewall settings? Can anyone help?

  I tried to go into Windows and change the settings of the firewall, but I get the same message.

  I also tried to run an update of the Windows security updates, but same message.

  I use Windows XP Professional Service Pack 3

  Any help would be greatly appreciated?

  Thank you

  M

  HI Maria/Winston.Not, trying to be coy but. I've never had close the firewall to load anything. It will be, or at least should invite you to make a choice to leave the program to run or not? Nevertheless.If you have windows activation hurt you firewall can reactivate manually without going through the bugs that you can not. If you click Start and choose the runtime application. Type cmd, and then press ENTER. When the command prompt box appears type "netsh winsock reset" without the quotes. He'll say firewall reactivated and ask for a reboot. Restart the computer and it will be active again. Just trying to help.

  Hi Winston/Hewlit,

  Thank you both for your advice.
  While waiting for your answers, I pushed all sorts of buttons and downloaded all kinds of programs in the hope that I could break the firewall (Hewlit the printer I tried to install says to disable the firewall to install the printer, and then turn it back on?).
  After a reboot, the message 'corrupt windows\system32 etc' file came and asked me to put in the original disc of Windows XP, I did not.
  Cut a long story short, I have now booked for a technician to come out as I'm totally lost.
  Thanks again for your help,
  M

• Old IMAC and new HP printer problem

  I have an IMAC 10.6.8 who I am trying to download and install the software for a new printer HP Officejet pro 8710.  He said that it is only compatible with 10.7 and upward.  Is there a way to get around this? or do I need to get a new IMAC or other printer?

  You need to contact HP for an older driver if they are available.

• HP Envy 5540: problem installing new printer

  I just plugged the new printer and turned on. The blinksslowly wireless light and the printer is just below my modum.

  Go into devices and printers t appear not at all.

  Help

  And did you follow the instructions to connect your printer to your router? You load the software and follow the installation instructions?

• I have a problem installing my new printer, it says that the printer is not compatible with XP, I can do to fix this? Are suggestions?

  It's a printer Epson SX130.

  Hello

  1. What is the exact error message?

  2. you have Windows XP Service Pack 3 installed on your computer?

  Method 1:

  See the link below:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_setup_indirect_printer.mspx?mfr=true

  Method 2:

  Download the latest drivers for your printer:

  http://www.Epson.co.uk/store/Printers-and-All-in-Ones/Epson-Stylus-SX130/drivers-support#.

  For reference, you can check the links below:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  http://support.Microsoft.com/kb/308028

  Hope this information is useful.

• Problem with the new printer print only some word from the quarterdeck documents

  I hope someone can help. I have a Dell Vostro and had 8 happy years print on a Canon printer. I just upgraded to a Canon Pixma iP4600 printer. I think that with some (not all) MS word documents it prints the rear tray (mean't for photo paper) by opposition to the tape before (designated for plain paper), for which I set the properties of the printer.

  Canon tech support say there is a Windows problem. I already reinstalled the printer driver but sill the same problem. Hope someone can advise.
  Happy Days!
  Bryan

  Hello
   
  This phenomenon only occurs with word documents?
  Have you checked if this happens with any other application?
   
  As you have already defined the properties of the printer and the problem is only with a few word documents. The first step would be to check if the word printing settings are defined in law.
  To fix printing on word problems, see the steps mentioned in this link:
  http://Office.Microsoft.com/en-us/Word/HP051887411033.aspx
   
  Sometimes this also happens if the printer settings are ignored when you print a Word document. To check if these settings are correct, try the steps mentioned in this article: http://support.microsoft.com/kb/904805
   
  If you still find difficulties in printing, run the Microsoft Fix it to reset the settings: http://windows.microsoft.com/en-us/windows-vista/Troubleshoot-printer-problems
   
  Post back with the results, so that we can help you better.
   
  I hope this helps.
   
  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.

• My new printer does not appear in the list of printers

  I bought a new HP Officejet Pro 8715 and I had great difficulty it is set up to use. It seems the method to print and scan drivers has changed dramatically since my last new printer. HP supplies over a CD with the software, but rather is supposed to happen automatically via the Apple software when I plug in the printer. This was not the case.

  At this point, I have the printer (4 hours) work, but I can't get the software "Readiris' of scanning to work. Yet once again, I am told that if I just plug the printer via the USB port and turn it on, then the OS knows what software to load. In reality, he doesn't "know" or "do" something.

  I tried to configure manually by going to System Preferences > Print & Scan and then by clicking on the sign more to add the printer software. This will show you a huge list of printers, but the list ends with "Officejet Pro 8660." My printer is a 8715, so there is nothing for my printer. Installation of the software for 8660 did not help to solve the problem.

  Two questions:

  1. why list of Apple printers does not have my printer?

  2. How can I get the Apple software to see the drivers for my printer?

  Thanks in advance for any help or advice!

  1. If the printer is a new model and HP did not provide Apple with the driver software, Apple would not list.

  2. go to the HP site to find and download the driver software.

  http://www.printerdriverforwindows.com/HP-OfficeJet-Pro-8660-driver-download

• Printer problems connects to the laptop

  Hi I just bought a new Epson XP320, and I get an error message saying "printer not responding" or "cannot find the printer."

  I had this problem with the previous one printer Canon and the store offered me a refund or a new printer, I chose the new printer (different brand) and now have the same issue.

  What is the Apple mac? I'm under El Capitan 10.11

  It seems to work very well then stops halfway through a job and sometimes not even start a job?

  I've updated all the drivers etc, removed the printer and he added a few times, it works via cable? but no good wifi sold as active WIFI.

  This problem is driving me crazy, I have a daughter in college and she needs to print things every day?

  Open system preferences > printers and Scanners and select the characters tab then control or right on the printer Epson on the left then click on: reset the printing system

• Print problems with the recent update to Version 10.11.5

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Roger 510 wrote:

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Have you checked with Epson for an updated printer driver?

• printing problem after upgrade to el capitan

  I just had to El Capitan installed on my MacbookPro 2011 13. I had had no problems printing up to now on my Canon Pixma MX320 primter.  Now, I get an error message 2 raster asking if I want to send the error msg to Apple. So I downloaded the new printer drivers for Canon recognizing my OS is El Capitan, but still no luck. I tried Word, Excel, jpg, and pdf print with no luck.

  Make sure that you have the latest driver from Canon. Go to their support site for the latest version of the driver.

  Printer & scanner software download for your Mac

  Printers not behave? Reset them and start from scratch. MacIssues

• From updateing to 8.1 WIndows printer problems

  Until I updated to Windows 8.1 other months everything was going well on my new laptop, then I went to something of my HP Photosmart B109n scan and it did not work because the pilot was now missing and the application that replace the HP printer driver HP is useless.

  On the advice of the HP site, I tried to download the new driver, but it wouldn't go, he said I had to remove the exsisting installation but when I try it just reboots the computer, but is still there afterwards. It turns out the uninstall has disappeared from the current and installation does not appear in the installer I downloaded.

  As a last resort, I used the system restore but has not only the printer has not changed but now some pre-loaded apps will not work and ask to renew the license of developers.

  I'm a lost what to do next - please help!

  Your laptop is not known to me, but in the case of update 8.1 Win, you should check this update from Toshiba to win 8.1 page: http://www.toshiba.eu/innovation/gen...ws8_1-message/

  There you can check if the Win 8.1 is supported on your laptop and how to perform the Update step by step for Windows 8.1
  Some drivers must be uninstalled and updated after installation of update 8.1 to win!

  Regarding your printer problem:
  Each manufacturer of the printer contains own drivers for the Windows System.
  We don't know me if HP released Win 8.1 compatible drivers for the printer Photosmart B109n clean, but to be honest, this problem is not related to the Toshiba laptop. If you have problems using HP printer under 8.1 to win, you should visit the support page of the printer manufacturer for troubleshooting tips and workaround solutions.