New printing problems 2540 - lack of lines

Similar Questions

• laptop computer new printing problems

  My new laptop will not print in color when you use a network - any ideas on how to fix printer Xerox Phaser 6250 DP

  Hello

  1. What is the operating system installed on the computer?

  2 are you facing issue to print a document from the internet or all documents?

  Method 1 : install printer drivers and check whether the problem is resolved

  http://www.support.Xerox.com/support/Phaser-6250/downloads/enus.html?OperatingSystem=Win7

  Method 2 : perform the steps in the article and check if the problem is solved or not.

  I can't print or preview before printing a Web page in Internet Explorer

  Method 3 : run the troubleshooter and check if the problem is solved or not.

  Open the printer Troubleshooter

  Method 4 : check the following article

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Method 5 : install the drivers

  Updated a hardware driver that is not working properly

  Hope that helps.

• New printer problems

  Use Windows 7 and am in a residential wireless group.  New HP printer installed and runs on the pc but have lost the connection on my laptop.  I can add the printer to my laptop, or do I have to do this on the computer - and how?

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem, you are ready to install the new HP printer wireless on your homegroup. I suggest you to return the article mentioned below and see if it helps you to fix and install the printer.

  Install a printer

  Install a printer on a home network

  HP printers - installing the printer wireless (Windows)

  Your wireless printer connection

  Please let us know the results. Do not hesitate to write back for any further assistance with Windows, we will be happy to help you.

  Kind regards

• THE PRINTER HP 2540

  I'll put up my new printer HP 2540 and have inserted cartridges HP supplied with the printer - all in a sealed box.  The color cartridge is OK, however, I thought that the black cartridge is not HP.  Help

  Thanks for your suggestions, however, I sent this printer to the store and got a replacement.  This one works very well.

• Yellow vertical line displayed on the touch screen of new printer Photosmart 7510.

  I have a vertical yellow line on the touch screen of my new printer Photosmart 7510.  The yellow line is part of the screen (pixels).  Install my printer on my XP Windows last night.  This is a new printer, right out of the box.

  This problem can be solved, or should I get a replacement?

  To help you better, if the printer is within the return period, you can contact the store you purchased at or if the printer is in warranty period for HP, you can contact HP phone support(1-800-474-6836) for a replacement.

• OfficeJet 4630: Install new printer - ink cartridge problem

  I'll put up a new HP Officejet 4630. I installed two cartridges of HP61 that came with the new printer. The menu of the poster printer "ink cartridge problem, the following ink cartridge needs to be replaced" followed by a black circle. How a new cartridge would be acceptable?

  Follow-up of your steps. Cartridges still a problem in the printer display.  Took printer at Staples. The store manager confirmed my status then loaded 2 new cartridges (free) the sales basket - printer worked.  Staples deals custormers good!

• HP Office Jet Pro 8720: Problem set up and launch the new printer & ink cartridge installation

  Two questions:
  First... it takes a LONG time for the computer to open itself.
  Then, when he did initiate... I opened the section of ink cartridge
  to install the ink & transport of ink would not come to the Center.
  SO... I stopped the printer to start again... and now, the
  screen has a spinning wheel indicating "cartridges controls."
  It lasts for more than half an hour.
  HELP... This is a new printer & I can't open.
  Thank you kindly.

  Hi @paulallah,

  Thanks for joining the Forums of HP Support for a solution to your printer problem.

  I understand that you have a printer of HP all-in-one OfficeJet Pro 8720 which took a long time to initialize and is now stuck in a mode 'check' cartridges after the reboot it because transport would not move to the Center. I would like to help with that.

  I would start by doing a Reset of the power on the printer.

  

  If that fails to solve the problem, you might want to speak with HP Technical Support as there may be a hardware problem.

  You mentioned that you are using a Mac running OS X 10.5 Leopard or more. The HP all-in-one OfficeJet Pro 8720 printer is only compatible with Mac OS X 10.7 Lion or later.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• I am trying to install a new printer, but I get "due to an unidentified problem, Windows cannot display Windows Firewall settings? Can anyone help?

  I am trying to install a new printer, and to do that I know I have to disable firewall settings. I try, but I get "due to an unidentified problem, Windows cannot display Windows Firewall settings? Can anyone help?

  I tried to go into Windows and change the settings of the firewall, but I get the same message.

  I also tried to run an update of the Windows security updates, but same message.

  I use Windows XP Professional Service Pack 3

  Any help would be greatly appreciated?

  Thank you

  M

  HI Maria/Winston.Not, trying to be coy but. I've never had close the firewall to load anything. It will be, or at least should invite you to make a choice to leave the program to run or not? Nevertheless.If you have windows activation hurt you firewall can reactivate manually without going through the bugs that you can not. If you click Start and choose the runtime application. Type cmd, and then press ENTER. When the command prompt box appears type "netsh winsock reset" without the quotes. He'll say firewall reactivated and ask for a reboot. Restart the computer and it will be active again. Just trying to help.

  Hi Winston/Hewlit,

  Thank you both for your advice.
  While waiting for your answers, I pushed all sorts of buttons and downloaded all kinds of programs in the hope that I could break the firewall (Hewlit the printer I tried to install says to disable the firewall to install the printer, and then turn it back on?).
  After a reboot, the message 'corrupt windows\system32 etc' file came and asked me to put in the original disc of Windows XP, I did not.
  Cut a long story short, I have now booked for a technician to come out as I'm totally lost.
  Thanks again for your help,
  M

• Printing problem with OE - 6 format since the upgrade to IE - 8: no space between the body and the subject line text.

  My computer is configured with XP SP3 and IE - 8. I've been using Outlook Express 6.0 (update of MS according to needs). Messages are always printed correctly. Lately, however, the body of the message printed directly below the object without line - the space between them. This happens on my Brother laser printer and my HP inkjet printer. I have not changed my settings of the printer. I've recently updated to IE - 7 to IE - 8; However, I see nothing in the settings of IE - 8 to explain this change in print. I recently installed "MobileMe" Panel Apple configuration, which has installed a separate set of folders in the list of folders in OE - 6. I did a clean (with Revo Uninstaller) uninstalling the MobileMe Control Panel, removed the extra e-mail account/folders and rebooted. Yet the printing problem.

  How to restore the space of line between the subject and the message body?

  Hello

  1. How is like print preview?
  2. don't you make changes to the footer settings?

  Method 1.
  If that doesn't help you can not save the file wmp.dll
  a. log on as an administrator.
  b. Click Start, type cmd.exe in the Run dialog box right click on cmd.exe, click Run as administrator and then click on continue.
  c. at the command prompt, type regsvr32 oled32.dll and press enter and then click OK.

  Method 2.
  If this problem started occurring recently, you can restore the computer to a previous state. You lose Internet Explorer 8 and return to Internet Explorer 7. In this way, we can check whether or not the root cause of the problem is installation of Internet Explorer 8.
  Reference:
  How to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/306084

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My fairly new Epson WF-2540 is nothing prints on the page, although it pulls the paper and it looks like it's printing, producing a blank page

  The properties show the levels ink because at least half full and I tried to realign the print heads, but still gets the same result.

  This was a new printer and printed a dozen pages before printing, it stopped.

  Hi Anita,.

  Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer. To resolve this problem, use the following methods in the order in which they are presented. If method 1 does not resolve your problem, go to the next method.

  Method 1
  Try the printer troubleshooter, which will attempt to diagnose and solve your problem automatically.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2
  Clear printer spooler files and activate the spooler service
  Step 1
  a. Click Start, type "Services.msc" (without the quotation marks) in the Open box and click OK.
  b. double click on "Printer Spooler" in the Services list.
  c. click on stop, and then click OK.
  d. Click Start, type "% WINDIR%\system32\spool\printers" in the opened window and delete all the files in this folder.

  Step 2

  You must be logged on as administrator to perform these steps.
  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. right-click on Print Spooler serviceand then click Properties.
  d. on the general tab, next to startup type, make sure that automatic is selected.
  f. e. the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, refer to the article below.

  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Method 3

  To identify and fix common printer problems in Windows, including print errors, errors of spooler for printing and other issues that could prevent you from printing, see the article help.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Old IMAC and new HP printer problem

  I have an IMAC 10.6.8 who I am trying to download and install the software for a new printer HP Officejet pro 8710.  He said that it is only compatible with 10.7 and upward.  Is there a way to get around this? or do I need to get a new IMAC or other printer?

  You need to contact HP for an older driver if they are available.

• HP Deskjet 2540: I can't find password wireless for the new printer!

  Hello

  I am very confused because I bought this new printer and I have downloaded the software application in my I touch, I went in wi - if parameters and found the printer but it requires a password I can't find it anywhere.  The manual says I have a find the password on the 'use printer wireless without router page' but I can't find it anywhere.

  can someone please help as soon as possible

  Thank you

  Hello and welcome to the HP support community!

  The information you are looking for is on page 53 of the User Guide:

  Connect to the printer without a wireless router

  HP wireless direct allows your wireless devices such as computers, smart phones, tablets and other

  Wireless, to connect to your printer directly over the wireless network, using the method you

  currently use to connect your wireless for hot spots and new wireless networks. With HP

  Wireless direct, you can print directly to the printer wireless, a wireless router, of your

  wireless device activated.

  To connect to the printer without a wireless router, press the button wireless directly from the printer

  Control Panel. If this is the first time you turn on the HP direct wireless, how Connect information

  page will be printed. Follow the instructures on printed information page.

  NOTE: HP direct wireless with security is enabled by default when you turn it on. The HP wireless

  direct password can be found by printing information page.

  NOTE: The information page are not available in all languages. It can only be printed

  automatically when you first activate wireless HP direct.

  To print information page, press in and hold the button wireless live for more than 3 seconds.

  If direct HP wireless is enabled, the Direct wireless status light is solid on.

  WyreNut

• HP Envy 5540: problem installing new printer

  I just plugged the new printer and turned on. The blinksslowly wireless light and the printer is just below my modum.

  Go into devices and printers t appear not at all.

  Help

  And did you follow the instructions to connect your printer to your router? You load the software and follow the installation instructions?

• I have a problem installing my new printer, it says that the printer is not compatible with XP, I can do to fix this? Are suggestions?

  It's a printer Epson SX130.

  Hello

  1. What is the exact error message?

  2. you have Windows XP Service Pack 3 installed on your computer?

  Method 1:

  See the link below:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_setup_indirect_printer.mspx?mfr=true

  Method 2:

  Download the latest drivers for your printer:

  http://www.Epson.co.uk/store/Printers-and-All-in-Ones/Epson-Stylus-SX130/drivers-support#.

  For reference, you can check the links below:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  http://support.Microsoft.com/kb/308028

  Hope this information is useful.

• Problem with the new printer print only some word from the quarterdeck documents

  I hope someone can help. I have a Dell Vostro and had 8 happy years print on a Canon printer. I just upgraded to a Canon Pixma iP4600 printer. I think that with some (not all) MS word documents it prints the rear tray (mean't for photo paper) by opposition to the tape before (designated for plain paper), for which I set the properties of the printer.

  Canon tech support say there is a Windows problem. I already reinstalled the printer driver but sill the same problem. Hope someone can advise.
  Happy Days!
  Bryan

  Hello
   
  This phenomenon only occurs with word documents?
  Have you checked if this happens with any other application?
   
  As you have already defined the properties of the printer and the problem is only with a few word documents. The first step would be to check if the word printing settings are defined in law.
  To fix printing on word problems, see the steps mentioned in this link:
  http://Office.Microsoft.com/en-us/Word/HP051887411033.aspx
   
  Sometimes this also happens if the printer settings are ignored when you print a Word document. To check if these settings are correct, try the steps mentioned in this article: http://support.microsoft.com/kb/904805
   
  If you still find difficulties in printing, run the Microsoft Fix it to reset the settings: http://windows.microsoft.com/en-us/windows-vista/Troubleshoot-printer-problems
   
  Post back with the results, so that we can help you better.
   
  I hope this helps.
   
  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.