New SSD speed with u410 problem

Similar Questions

• Re: Satellite L855 - max with newer SSD speed

  I am looking to buy this mobile
  + The message was edited: broken link has been removed.

  (Croatian language, but will help)

  I wonder if it is SATA 6 Gbit/s so I can buy newer SSD to use max speed?

  Thank you
  Mario

  Unfortunately, your link does not work, but as far as I know, this kind of info is not available to the specifications of the laptop. In my opinion, it is not important. It is important that you can upgrade this laptop with very fast SSD. I ve done on my old Satellite P500 and it runs very fast. I m really happy now.

  If you want some info on SSD, visit http://storage.toshiba.eu/cms/en/index.html

• OfficeJet 4630: brand new officejet 4630 with the problem of black ink and ok button does not work

  Hello! Today, I bought a new printer, officejet 4630 and it included ink cartridges in the box.

  ISET it upward as the sheet in the box said. After I had filled in date etc, I put in the ink (and Yes, remember to check it was compatible and take the Ribbon), then this message showed on the screen and still doesn't work:

  "Problem of ink cartridges. The following ink cartridges need to be replaced"and a black dot.

  The cartridges were brand new and came in the same area as the printer.

  I tried a reset (taking the power cord, wait 60 s etc) I saw in the Hp support you need to press 'ok' to get rid of the message before restarting. I can't press ok. It sounds right. I press any button.

  Suggestions? Of course, I can try it with a new cartridge, but to pay $20 for a new cartridge, when it was included in the box and should work is not correct.

  Hi @Candykuma,

  Welcome to the HP Forums!

  I understand that you ar get the error, the "problem of ink cartridges. The following ink cartridges need to be replaced"with your black cartridge on your printer HP Officejet 4630. I am pleased to address this error of cartridge for you!

  Please, try the steps in this guide, a "missing cartridge", 'cartridge problem,' or 'not compatible ink cartridges' Message error for HP Officejet 4630 and HP Deskjet Ink Advantage 4640 e-all-in-one printer series.

  If this guide does not solve your problem, please Contact HPtelephone support for further assistance, as the ink cartridges are under warranty. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Good luck!

  "Please click the Thumbs up icon below to thank me for having responded."

• New owner T5i with card problem Sd Card

  Hi, my first post here. I just got a new T5i last weekend and I have a problem with the SD card. Will load pictures into my computer library in good order of the photo being taken of. I'll have the photo number 0ne when in fact it was like the 5th picture I took. Photo 2 could actually be like the 10th photo I took... nothing is in good order. Thanks for your help.

  Problem has been resolved, it was a software problem. Thanks for the help.

• Installed a new game but with some problems.

  I have a compaq with the 945GM card nc6320. I just picked up and installed 18 wheels of steel: extreme trucker and it seems to work expect that when I get to the first page, every thing in the back is blue, but all the rest is fine. So I start a new game and it takes you into the game but but everything is blue, I can still do on some of them, but his blue all. I can pause and go to the menu and everything is all right there, but going back to the game its still blue. I installed the latest driver for the card, but still no luck. Please can someone help me. Thanks for any info.

  Hello Ace94,

  Thank you for your message.  After doing a little research on your game, please check that your video card meets the following criteria.  Everything you mentioned in your post indicates a driver/video card problem.  Please let us know after you have confirmed that you can or cannot run this game with your video card.  Built-in maps more do not have as much RAM.
  256 MB graphics accelerator (GeForce FX or better, ATI 9600 class)
  We look forward to hear from you.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• speed with vista problem

  Hello
  I have internet café, I buy all new computer with process of amd le1661 and ram is 2 GB, but my computer is very slow please tell me what ineed to do
  thanx
  Micheline

  Hi DHILLON007,

  Take a look at this link which describes several things you can try to improve the performance of your system:
  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance
  Let me know if this helps or if you need further assistance!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Equium and other laptops in general and the Usb 2 speed with stuff problems

  Hello

  I use a programmer TOP2049
  I can't use it to program certain types of chips using the laptop.
  Main machine can reduce the speed of the usb to 12mbps but the laptop cannot reduce this in the bios

  Is there a way to do this?
  Does anyone know?

  If so tell us... TIA simeonW

  Hello

  BIOS of laptop computers is different and it does not support the same functions as BIOS for a desktop PC.
  In the BIOS of the laptop, you cannot change the speed of the USB.
  To my knowledge, this is not possible.

  Welcome them

• used norton ghost 15 copy to new ssd SSDS now win7 is coming not authentic, it is more I switched to win7 pro

  Hello

  I have an SSD that I can't seem to stay. He dropped out to have an error message saying: missing Boot Manager

  Two places does not have difficulty, found that the firmware is up to date but cannot challenge or update

  So I bought a new ssd, came with Ghost 15, copied ssd again

  switching to ssd and started, crossed and connected only to mount a non-genuine copy of windows,

  After a very long wait to say loading Office

  This is an update to win7 pro win7 and it's real,

  Type stuck

  Thank you

  I don't see any problem in your report. everything looks good

  I assume that you have installed the technology Intel Rapid Storage Technology driver.

• the upgrade of the disk sata hard to new ssd sata 3 disc 1

  I have Hp m9510 running windows 7 64 bit home edition.  The motherboard is ASUS IPIBL-LB (Benicia), my drive sata hard existing 1 running in raid mode.  I want to add a new SATA of SDS 3 as a new startup disc and leave the player sata 1 existing as a backup.  Insofar as the motherboard is built for sata 1, if I install a sata pci card 3 I will then be able to obtain the transfer of higher data rates of the new ssd without causing other problems?

  If your current configuration has a single disc, then your default would be AHCI.

  RAID stands for redundant array or inexpensive disks and requires two or more physical hard disks for the implementation.

  In this case the preferred configuration would also be AHCI. It's a SATA mode. (Advanced host configuration interface) His replacement is IDE (emulation) mode

• Problem with transfer/install Windows to new SSD 64 GB instead of 1 TB HARD drive

  Hello everyone!  I know that I am not alone with this problem, but until now no effective don't advise have been seen or given!

  Please help get 1 TB of HARD drive for the 64 GB SSD in my Alienware m17 r4!

  Alienware Respawn program is NOT able to cope with this transfer... He said that there is no enough space, must be original 1 TB drive...

  Also, it is strictly recommended that new windows should be installed SSD not transferred again, but how do I do it?

  with the new system UEFI/BIOS it is looks too difficult for me... There is no installation of Alienware Microsoft Windows 8 Disk in the package comes...
  If I can get it? And then, he of course it will work correctly in the UEFI system

  Have tryied: MINI TOOL PARTITION WIZARD, it shows all containing (5 partitions) completely has been copied from 1 TB of disk and mounted on the SSD 64 GB

  but when I put the SSD in the laptop, he says is that some sort of error and the system must be reinstalled.  CD of Acronis not picked up at all with boot...

  Finally, it will be normal Windows 8 installation CD compatiable with UEFI, or it must be special for this system? (average if I leave and through her to the shop)

  Is any body can help?

  Thank you in advance in this area!

  The license of Windows 8, my understanding, is the UEFI. So I recommend that you ask the disc from Dell.

• Problem with the installation of 64-bit on the new SSD

  Hello

  I just bought a new SSD drive, on which I would like to install a new system 64-bit "clean". I've used up to this 32-bit system, but I finally realized that 64-bit is better for today's software.

  There is a problem however, because the installation diskettes (and permits) I are:
  -Windows 7 32-bit OEM
  and
  -Upgrade Windows 8 32/64 - bit

  Unfortunately, I found information that it is impossible to upgrade Windows 7 32-bit to 64-bit Windows 8 on the technical support Web site.

  Is it possible for me to get the 64-bit Windows 7 installation files, even if I have a 32-bit version?
  Can I directly install the updated 64-bit of Windows 8 disk system? How activation works in this case?

  Is there another way, I could solve this problem? :(

  I would appreciate your help.

  Thank you!

  Hello Auunie,

  Thank you for the question to Microsoft Community.
   
  From your problem description, I understand you want to know how to upgrade from 32-bit Windows 7 to 64 - bit Windows 8.
  I suggest you follow the suggestions of Babu V replied on 28 October 2012
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/how-to-upgrade-from-32-bit-Windows-7-to-64-bit/e308d5c1-b8f6-4f47-A303-e36c830b4711

  Note: You can use the same product key for activation.

  Hope this information helps, just reply to the State of the question to get help.

• 2015 Macbook Pro 2.8 GHz > 16GB RAM 1 TB > PCIe SSD > overheating with Thunderbolt Display 27 "> Constant MAX RPM fan speed

  Hello community,

  First of all, I want to congratulate Apple on the construction of such a laptop well. It is a luxury product that is clearly desired by most people, which I understand very well that he's a new owner. But entering the heart of the problem that I face outside this machine being an external engineering masterpiece.

  Professional background:

  I'm a computer engineer / scientist / programmer by profession. I am currently employed at Hewlett Packard Enterprise (HPE) as a Senior Consulting Engineer level IV for their BIG Data Software Division. Yes, I program (Java and c#), scripts (powershell, batch and SQL), solutions architect, design, to test software and debugging, implement large enterprise-level solutions ranging from a cluster of 2 mirrors servers-to-of thousands of servers to multiple clusters (even from a perspective of work station of the missions of deployment from 200 KB - to - 50 jobs in the world) work with SQL databases on a daily basis, working with storage devices (SAN mutli-million dollar NAS and DAS), provide an infrastructure troubleshooting and problem resolution, have 8 international recognised certifications, a degree of master of science and involved with concerts on the side as well as build computers as a hobby. My computer knowledge is vast and my RESUME goes beyond what I have briefly described. It is important that I give this background to demonstrate that my level of computer knowledge is beyond the scope of this post.

  Laptop Usecase:

  Recently I bought mid-2015 Macbook Pro 15 "2.8 GHz Intel i7 quad core, AMD dedicated GPU, 16 GB of RAM, 1 Portable SSD PCIe TB from an authorized Apple dealer. To maximize the beauty of this gem, I also bought a monitor Thunderbolt Apple 27 "due to its ability to offer a dedicated gigabit NIC and additional USB connectors. Basically, the screen acts as a central docking for the laptop and offers additional i/o that does not have the laptop (somewhat a disappointment that it's called a 'PRO' for laptop - this can be discussed in an extra thread).

  I will mostly use the laptop for tasks related to work as operating on dozens of remote servers via RDP, using office 2011 and 2016 Lync, Eclipse for Java programming, access the HPE intranet for related tasks at work, set up conference calls, connection with clients remotely via WebEx or TeamViewer and typical everyday computing. For fun, I'll use the laptop to compose music through Logic Pro X, browsing the Web, doing work with Photoshop/Lightroom/and other products Adobe, Web browsing, Email, Youtube, NetFlix, coding, and other basis for computing tasks.

  Question:

  I am primarily an engineer Windows to the heart and don't work well with Unix/Linux, so forgive me if certain acronyms and terminology is slightly outside when it comes to the OS.

  The question that I am currently facing is how HOT and high cell phone VOICE gets during very little use. It seems that, given the 27 "Apple Thunderbolt connected display cause heating and the fans to be excessive and loud. 'A little' work around the question I unplugged the lightning poster power adapter and have dedicated the trendy laptop adapter. It 'a bit' reduces the amount of heat generated, which reduces the speed of the fan to be a little less quiet. However, the noise level of fans and heat is not reduced enough to convince me!

  After the control process during the time of the laptop being extremely strong and warm, I noticed the only vivid process is the process of "kernel_task". However, I debunked this theory by leaving the unit to return to a normal state, that required me disconnected the Thunderbolt display, and the process ran again without all the negative effects of heat and noise.

  So, why Apple would create a laptop that indicates the external monitor is fully compatible, can support up to 2 external displays with no problems and provides a support for this configuration, if there are any other problems when connecting?

  
  

  * Please do not provide responses that I have received a bad laptop or a bad monitor. Appears not to be the case because when I am doing absolutely nothing on the machine, heat is minimal and the fans are 'enough' quiet, even when connected to the Thunderbolt display. However, even simple web browsing on the Thunderbolt display forces do MAX out fans and heat is generated quickly.

  I love this laptop. His elegant, fun to work on, is luxurious and is a potential item that meets all my needs. But I just can't justify spending more than $4 K on a configuration that will cause problems and significantly reduce the lifetime of the laptop.

  1 should I return the laptop and love at first sight appear and waiting for Skylake edition which will be released in the coming months (energy consumption reduced, rising in power and performance, and (?) one possible different GPU that excels much better than 'crap' AMD GPU?

  2. or should I paste and see if a solution or resolution is proposed to the issues that I am experiencing?

  3. I see the same problems all over the internet. Anyone else here has the same problems?

  4. why Apple would invest in this GPU 'cheap' for such a machine power? AMD? Really? (< (less="" than)="" $150="">

  5. How can I host a Lync call with clients when I hear more the laptop that I can hear them?

  My thoughts:

  I spent $6 000.00 on the construction of an incredible machine at home. It has an Intel i7 5960 X Octa-Core processor, nVidia GTX 980, 64 GB RAM Corsair DDR4, 12 TB of disk 7200 RPM, a 512GB SSD for the OS and temporary storage, power 1200 Watt, card reader 5 in 1, a player Blu Ray optical blazing fast, liquid cooling, a Premium Asus Sound Card, the card mother 'best!' on the market (I finished this statement that fans just went back to MAX RPM0 - maybe) because I'm throwing my personal build an Apple forum?), a mechanical keyboard, mouse laser with 12 K dpi and five monitors 24 ".

  I was willing to spend that money on a laptop of luxury that I can travel with, but is it really worth what I'm going through? Also, others on the Internet said they have returned their Macbook Pro for the same model without the dedicated GPU and no longer meet the problem. BUT why someone would invest $3 K in a machine without a good graphics card? IT MAKES NO SENSE TO ME.

  PLEASE, I BEG YOU! Can someone help APPLE me this question?

  If I am not convinced to the contrary, Apple then lost me as a customer forever and return to Windows, I oppose the $4 500.00 I spent. If I am convinced to stay, then Apple will get $4K out of me at all times every 3-4 years, I invested in most any software.

  Also, if I can post a video showing you what I'm listening to, then you will be in shock. Honestly, I'd like to keep this machine, but I need help to understand what is happening and what can be done to correct the problem.

  Thank you

  mjaestewart

  Everyone from Apple have a preview? I am pretty surprised to have not received a response.

  Please help me out here.

  Thank you

  mjaestewart

• Satellite Pro P300-1ES (PSPCDE) - speed with W - LAN problem

  Hello

  just got my new laptop Toshiba (see subject). Unfortunately, I had a big problem with the W - Lan laptop speed.

  Compared to my old laptop (satellite Pro A120, with a chip of WLAN Intel 3945) the new laptop (with a chip Atheros AR9281) scores only about 10% of the possible Internetspeed (approximately 1.5mbit compared to 0.1mbit!).

  I am running Windows XP Service Pack 3 and tried to install the latest drivers for the card Atheros (7.6.0.200), newest Bios Version (version 2.50) and tried a few things on the forum (like disabling the option 'save energy' in the advanced driver options.) But speed has not improved at all and now I'm all ideas.

  I'd appreciate it if someone could help me with my problem. Many thanks in advance,

  TripleYou

  Hello

  As far as I know the standard WLan card Atheros AR5BXB91 supports the 802.11bgn WLan.

  Check what WLan standard A, B, G or N to have been chosen in the
  * Device Manager-> WLan card properties-> Advanced tab * and set it up again.

• Presario CQ61-110SL: upgrade for laptop Presario CQ61-110SL from XP to Windows 7 with new SSD EVO 840

  In fact on Presario CQ61-110SLI I have XP installed the Vista of origin instead.

  Now I want to upgrade to Windows 7 and contestually get a new SSD Samsung 840 rather original EVO... What is the correct procedure?

  Thank you

  Hello

  Thanks for posting in the Forum from HP Support.

  There is no procedure to upgrade from XP to Win 7, it would be clean installation.

  1. place the SSD drive in the machine instead of the HARD disk

  2. start the installation of Win 7 disc to install Win 7 (best x 64 edition)

  3 install the drivers of the machine, you can download from >here<

  Windows 7 is optimized to work with SSD, there will be no problem.

  If you have important data on your old HDD, you can either save it before (on external support, USB key, Cloud solution, etc.)  or after it (via a USB cable plugged into the laptop as external drive). This is also an option to transfer data.

  Please, let me know if you have any other questions. Happy holidays!

• MacBook pro 2009 with new SSD try to clean install Yosemite or TM disaster restoration.

  Hello.

  I think this is going to be a difficult discussion.

  Unibody MacBook Pro 2009. Original Apple HDD with Yosemite 10.10.5.

  Two months ago, that my HARD disk is dead.

  I installed a new SATA II Toshiba 1 TB HARD drive and through the recovery of TM all went well.

  A couple of weeks, my 'new' SATA II Toshiba 1 TB HDD started to scratch a little (I mean literally zero while reading/writing), so I thought he would die soon again. This time, I decided to buy an SSD in order to have better performance and superior durability.

  So I bought a Toshiba 248 Gb SSD. I'm not a big fan of Toshiba, but where I live, it's the SSD only I found in the store.

  I removed the old HDD, I installed the new SSD and where my nightmare starts.

  First of all, I tried with a new Installation of USB from Yosemite. I followed all the passages and the installation completed in about 9 days. Yes you read that right: 9 days. The progress bar runs for 9 DAYS.

  At the beginning I obviously interrupted the first couple of facilities when the progress bar was like "12 minutes at the end" for three or four hours, but then I read in many articles and support threads that it is quite usual installation seeks stuck for hours or days, but if you open the log console computer is always something. So I gave him his time and the third or the fourth installation I waited my NINE DAYS to be finished.

  Then when the installation ended the restarted mac of himself and is stuck at the loading screen with his beautiful Apple and the progress bar frozen at about 50%.

  I froze for about 4 or 5 hours of average.

  I found a few articles that sometimes happens, and all you have to do is to force the computer to shut down and start again. So I tried to force the shutdown by holding down the power button and after the reboot it just keeps starting with and stuck at first infinite progress bar.

  So I reboot on CMD + R to get a clue, if I got in trouble on the SSD or what. I run disk utility and found that on my SSD were about 290,000 files and many files as the Yosemite was finally installed. I tried to check the permissions, but it says less than a minute and then got stuck at halfway to complete 15 minutes, so I stopped it.

  After that I think 4 or 5 attempts to start new fresh install on my Yosemite and clean, I reset the SSD erase decided to start all over again.

  I died a little inside while doing it. Same as the erasure was so f * king quick to finish! (about 50 seconds, sonofa 'byte').

  Then I tried to not reinstall Yosemite again (the nightmare of 9 DAYS still has me) but I have tried a new way: recovery of TM.

  Just to say my original TM backup was about 340 GB and my new SSD is 248 only while it was quite clear he wasn't.

  I connect my external TM drive to another computer and I worked the ' delete all backups of * file * ' to get a smaller backup TM.

  Now, I moved a lot of things outside the TM backup and the new dimension of the TM backup is about 90 GB (I want to say that the whole folder backups.backup is about 90 GB), in fact I moved the other stuff was also inside the external Western Digital drive and is now free space Go 910 (, hence the content of the WD is just the TM backup folder this weight about 90 GB), but I still have the 'this drive doesn't have enough space to restore your system.', it's totally A LIE.

  Never mind. I accepted the idea that sometimes even computers are ashamed of themselves and begin to tell lies. I can handle. There was a holy man in the history without any sin. So, ok, no problem. I'm not upset or anything. I can get over it (mf you little liar!).

  Think of manually restore the files that I needed once I have a BONE in my new SSD, I used the same external disk to create a new backup from another computer, my Mac Mini TM. Everything went well and I got a new Mac Mini TM backup about 60 GB (it's much less than 248 GB of my new SSD).

  I reboot the Macbook again to try to restore the backup, Time Machine of Mac Mini and everything seems to work, except for:

  -progress initially said about 650 hours needed to complete the restoration ago.

  -I went to sleep and let the machine itself working together on the restoration and when I woke up this morning I found that the rest of the time was "fair" 52 hours.

  -J' was a little happy to see this, until the Rainbow rolling ball appears. Everything got stuck again. I force shutdown and then try to restore it.

  Now it works again and the remaining time is close hours 672 (and growing). I'll give it another chance. We'll see.

  Now, I have four questions to ask you:

  1. you have an idea (with the exception of a curse or a matter of black magic) WHY all this happened? And of course if there is something wrong and I can work to fix it otherwise?

  2 are there special settings to enable/disable/configuration/whatever to create works faster still to understand that it doesn't properly before discovering this NINE DAYS or 672 HOURS right now?

  3. when we agreed that something like that was acceptable? I used to be a project leader in the world of ICT and in 20 years I NEVER, I say NEVER, released a product/app/site Internet/solution that considers that an option taken 9 DAYS to install or something like that. NEVER. Do not forget that we are talking about Apple and an operating system. I think Windows is laughingly taking revenge.

  4. do you think that for me it is time to let Apple and go back WIN + PC? It's quite frustrating and I use the computer to WORK, not to play games video and this is not the kind of operativity expect after paying a little more for material, a little more for software, a little more to be part of what it is supposed to be the one that had the best choice (index not be not it kills me).

  I thank in advance for any help/tip, you can provide.

  Alberto

  This is a fairly long post. What I would say is:

  1. the next time get a hard drive from a company with a good reputation like Samsung (best SSD ever, I have several internal parts and a laptop EVO). I get them shipped.

  2. as you use the Mini, the recovery partition allows you to install a new copy of Mac OS X, and then use the Migration Wizard to move your stuff.