new-tagassignment tag not found with id back

Similar Questions

• I can't open Firefox, but Safari opens fine. Tried to download Firefox, but the new version is not compatible with the iMAC G5

  I use Firefox for several years on my G5 iMAC, running MAC OS 10.5.8. This morning, Firefox does not open. Tried to open it from the icon in the Applications folder, but does not always. Safari opens without difficulty. Tried to download Firefox again, thinking a file might have been corrupted, but new version is not compatible with my hardware of desktop computers. I find a compatible version of Firefox? My NAV for MAC security software is not interfering.

  • Versions of Firefox 4 and later do not run a Mac PowerPC.
  • Firefox 4 and later requires at least OS X 10.5 and an Intel Mac.
  • http://www.Mozilla.com/Firefox/5.0/system-requirements/

  For a non-official Firefox 4 compatible version (TenFourFox) which works on Mac PowerPC with OS X 10.4.11 or OS X 10.5.8, you can consult:

  • http://www.floodgap.com/software/tenfourfox/

  Firefox 3.6.x (Mac OS X 10.4 and later versions) can be found here:

  • http://www.Mozilla.com/en-us/Firefox/all-older.html

• Error: "Tuner not found" with Windows Media Center

  Original title: someone at - there a solution to this problem of Tuner not found with Windows Media Center? I tried for several years to find an answer to this embarrassing problem without success.

  I did just about everything, including a restoration of the complete system without success. It would be nice to be able to use my Windows Media Center to watch live TV and record programs I would like to see later.

  There is a great thread to
  http://h30434.www3.HP.com/T5/desktop-hardware/ViXS-pure-TV-U-48A3-TV-tuner/TD-p/52529
   
  with people have reported this problem with this tuner.
   
  Unfortunately, it looks like the only solution people have found is to replace the
  Tuner with another brand.
   
  I don't know if it's the hardware failure or something else, but looking at this
  wire, if it was ME, I cut my losses and replace the tuner.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• laptop HP pavilion touch 14: replaced defective hard drive with pre installed OS on new HDD - device not found Boot (3F0)

  Hey guys,.

  I have a pc hp pavilion touch laptop 14, which has been having a defective hard disk that the operating system was not start and the system test indicated that the hard drive contained errors.
  
  I replaced the hard drive with a new one and before installing the hard drive I formatted with a win installation 8.1. I thought the laptop would just start normally to win8, but gave me a screen saying:

  boot device not found please install an operating system on drive hard drive (3f0)

  The hard drive is new and I did not not how its gives me this error!

  In addition, this laptop does not seem to boot from a cd to format!

  Any ideas?
  
  Thank you
  Karl

  Hey BHK6,

  I found out what was wrong! It was so simple!

  I just need to make the boot inherited from the bios, like that he started directly from the hard drive and does not need of any software pre installed HP to start.

  Thanks for your help anyway

  Karl

• New iPhone is not compatible with Macbook

  I upgraded my iPhone and found that it is not compatible with my MacBook running 10.6.8. I have a lot of music that I have not bought on the iTunes store I can't transfer it to my phone. Is there a software that I can use it, or I have to buy a new computer for $1000 to work on my iPhone?

  If your old MacBook cannot run at 10.8.5, you will need to either buy a new computer, or you can run Windows using Boot Camp or a virtual machine and synchronize your phone with it. You will need to install Windows 7 or higher. VirtualBox is free and should be able to manage currently running Windows 7 and iTunes well enough to allow you to sync your music with iTunes.

  In the meantime, you can start saving for a new computer. You do not specify which MacBook model, you have, but it must be at least 5 years now.

• New version will not work with the yahoo toolbar. How can I solve this problem?

  I downloaded the new version of Firefox, and it will not work with my yahoo toolbar more. It worked fine until I updated to the new version. I went back to the old version 16.0 and now he repeats to me my version is obsolete. How can I solve this problem and get the new version to work with my yahoo toolbar?

  To start, make sure you have the latest Yahoo toolbar.
  http://help.Yahoo.com/kb/index?page=content & y = PROD_TOOL & local = en_CA & ID = SLN5044 & print = false

• Inspiron 1545 - hard drive replacement, new drive SATA not found 'internal hard drive not found ".

  Hi all

  I'm trying to install Win7 in an Inspiron 1545 with a new SATA hard drive that has been purchased. When I insert the disc, I get "Internal hard drive not found." I checked the drive does not appear in the BIOS, I already tried to reinstall the drive several times. In addition, I tried to load the chipset drivers, drivers SATA, etc. of the Dells, the Reader site still does not appear in the installation of the OS when starting on a DVD or in the bios.

  I do not think that there is a problem with the new drive, I plugged the new drive in another Dell laptop model and it recognizes the drive in the BIOS, also I can always start on the previous in this laptop without problem hard drive when I plug it in.

  Is there a specific driver, etc. should I use for the drive to be recognized or have other thoughts?

  It's strange - either the new HDD has a rare compatibility with your embedded controller problem (I use a 500Gbyte in my 1545 no probs)) or it is a mechanical problem. I look at the physical dimensions and compare your original hdd by the new. Watch the video (even if it's on a 1525 (similar to a 1545) and a SSD hard drive)-go to 02:20

  cs_setInnerHtml ('video_a3a3072d-f294-4bec - 85b 6 - 1eefb7b19e68', ");

• Time of beginning of stream / or server not found with FMIS upgrade

  I recently upgraded from FMS 2 - FMIS 3.5.  Through our videos stream of internal network like a dream!  However, to access them from outside our own network of the ways they take 20 seconds to load, or sometimes just get a message saying that the server is not found.

  It wasn't a problem with the FMS2 and there were no changes to the firewall settings or something like that since the old server was running without problem.  I have new server set to use exaclty the same ports, but wonder if there are a few other parameters that could be the cause?

  Setting in network is not really my area of expertise, and I have no idea where to start looking to improve things.  Can anyone offer some suggestions as to why this is happening?  Would appreciate any help.  Thank you

  This 20 second period makes me suspect and the question with links in the port. It is typical for the Flashplayer to take about 20 seconds for the attempt on port 1935 to exhale and try to use port 80.

  In your fms.ini, you have the adaptor.hostport of the value? Also, is there anything else running on the server that could handle port 80... Maybe a HTTP Server? If so, what is the environment? IIS, apache, windows, Linux, etc.?

  Also, in your event logs, you will see errors of FMS, suggesting that it cannot attach to a specific port? In windows, it will appear in your event viewer... not sure about Linux.

  You could try connecting to the server with a port defined in the url...

  RTMP://mydomain.com:1935/application/instance

  and

  RTMP://mydomain.com:80/application/instance

  If you find that either do not always succeed, he suggested that a port is occupied by another application, or FMS is not mandatory to all IP addresses or ports configured for a reason any.

• 'server not found' with an ip but ok with vpn ip address

  Windows 7 for the last days that I get the message "server not found" when I try to access many sites (including using Mozzilla). This happens with ie also. However, when I use a different IP address (via my VPN) everything is OK.
  What is going on?

  Cannot find server - troubleshooting

  • https://support.Mozilla.org/en-us/KB/server-not-found-connection-problem

• Client Windows Update not found with error 0x80072efe.

  After trying a few update solutions, still cannot update my Windows Vista Home premium.

  ----------------------------------------------------------------------------

  To THE: search updates [CallId = {99E90203-6E7E-48FF-B9F0-434086CD2147}]
  2010-06-11 09:00:12:727 1956 113 c to THE #.
  2010-06-11 09:00:12:729 1956 113 c to THE setting next detection timeout at 2010-06-11 12:00:12
  2010-06-11 09:00:12:729 1956 113 c time of installation to THE adjustment to THE planned at 2010-06-12 01:00
  2010-06-11 09:00:17:726 1956 d88 report REPORT EVENT: 09:00:12:725 2010-06-11 + 0200 1 148 101 {B0A8E80E-6F0D-4000-8775-D52B6B945499} {00000000-0000-0000-0000-000000000000} 0 80072efe AutomaticUpdates outage software to sync Windows Update Client did not detect with error 0x80072efe.
  2010-06-11 09:00:17:743 1956 d88 report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
  2010-06-11 09:00:17:743 1956 d88 WER sent report: 7.4.7600.226 0x80072efe 00000000-0000-0000-0000-000000000000 Scan 101 unmanaged
  2010-06-11 09:00:17:743 1956 d88 report CWERReporter finish event management. (00000000)

  I was able to update windows or windows defender and my sytem restore was kapput too :(

  solved the problem with Kaspersky tdss killer... found here: download and scan can heal everything what he finds.

  http://downloads.PHPNuke.org/en/download-item-view-m-g-n-m-z/Kaspersky%2BTDSSKILLER.htm

  Good luck!!

• Brand new laptop does not come with disks of windows, I need to reinstall windows what/where/how do I?

  I bought 2 new laptops. Both come with Windows already... so, if I need to reinstall windows... How/where/can do?

  Hello

  For future reference, these are VISTA forums you want on the new laptops in.

  I suggest other questions about these laptops you ask in the correct Forums.

  Here are the General options of relocation for you:

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  See you soon.

• causes VIX/vmrun.exe ' error: the specified version is not found "with WS 8.0.1

  vmrun.exe t ws start "Q:\VMware\REG\REG-XP3 (RC2).vmx"
  Unable to connect to the host.
  Error: The specified version is not found

  I installed in this order:

  
  Workstation 8.0.1

  VIX 1.11.0.18997

  On a Win7 x 64 SP1 box.

  There also the vSphere PowerCLI 5.0.0.3501 installed however this seems to need to ESX and vCenter, so it is useless for me.

  
  Long story short, I need vmrun maintenance tasks such as deleting snapshot which through GUI takes a.) ages, b.) pump lock your workstation / takes focus.

  
  How can I get this working again? I checked the vixwrapper - config.txt and it lists the following:

  # Workstation 8.0.0
  vmdb WS 14 8.0.0 Workstation - 8.0.0 - and-vSphere - 5.0.0
  Player vmdb 14 4.0.0 Workstation - 8.0.0 - and-vSphere - 5.0.0
  WS-shared 14 no Workstation 8.0.0 - 8.0.0 - and-vSphere - 5.0.0
  WS 14 vmdb e.x.p Workstation - 8.0.0 - and-vSphere - 5.0.0
  drive 14 vmdb e.x.p Workstation - 8.0.0 - and-vSphere - 5.0.0
  WS-shared 14 no Workstation e.x.p - 8.0.0 - and-vSphere - 5.0.0

  Thank you.

  I just found this same problem with Player 4.01 exaxt... VMware VIX who uses this configuration file and if the gift ' e versions EXACTLY match it flows without any usable information.

  Add this to your config file and it will work...

  # Workstation 8.0.1
  vmdb WS 14 8.0.1 Workstation - 8.0.0 - and-vSphere - 5.0.0
  Player vmdb 14 4.0.1 Workstation - 8.0.0 - and-vSphere - 5.0.0
  WS-shared 14 no Workstation 8.0.1 - 8.0.0 - and-vSphere - 5.0.0
  WS 14 vmdb e.x.p Workstation - 8.0.0 - and-vSphere - 5.0.0
  drive 14 vmdb e.x.p Workstation - 8.0.0 - and-vSphere - 5.0.0
  WS-shared 14 no Workstation e.x.p - 8.0.0 - and-vSphere - 5.0.0

• Extension of class Array, get Error #1069: property 0 not found with indexOf appeal

  I'm using inheritance to extend the Array class to create a class of paths that moves of Sprites/MovieClips around on the screen. I get a weird error on a call to indexOf. Here is the error:

  ReferenceError: Error #1069: property 0 not found on paths and there is no default value.
  to Array$ / _indexOf)
  table / http://Adobe.com/AS3/2006/builtin:IndexOf ()
  to Paths / Next () [D:\Stephen\Documents\Flash\TossGame\TossGameFirstPerson\Paths.as:40]

  Here is the corresponding code in the class of paths:

  SerializableAttribute public class paths extends Array
  {
  private var cCurrentPath:Path;
  
  public function () following: path
  {
  var lArray:Array =;
  var lNextIndex:int is indexOf (cCurrentPath) + 1;.
  If (lNextIndex == length) lNextIndex = 0;
  var lPath:Path = lArray [lNextIndex];
  lPath return;
  }
  } / / class

  I get the error in the highlighted line. cCurrentPath is filled with a trace object that corresponds to the object at position 0 of the this object (paths). I tried the following variants of the Next() function:

  public function () following: path
  {
  var lArray:Array =;
  var lNextIndex:int = lArray. indexOf (cCurrentPath) + 1;
  If (lNextIndex == lArray. length ) lNextIndex = 0;
  var lPath:Path = lArray [lNextIndex];
  lPath return;
  }
  

  public function () following: path
  {
  var lArray:Array =;
  var lNextIndex:int = this . indexOf (cCurrentPath) + 1;
  If (lNextIndex == this. length ) lNextIndex = 0;
  var lPath:Path = lArray [lNextIndex];
  lPath return;
  }
  

  public function () following: path
  {
  var lArray:Array =;
  var lNextIndex:int = super . indexOf (cCurrentPath) + 1;
  If (lNextIndex == super. length ) lNextIndex = 0;
  var lPath:Path = lArray [lNextIndex];
  lPath return;
  }
  

  
  Same product if mistake it I try. Anyone got any ideas?

  Stephen

  Flash CS3 Pro (Version 9.0)

  Mark your dynamic class.

  class dynamic public railways extends from table

• New Chipset is not Compatible with the current installation of Vista

  Had to replace my motherboard with a chipset, G41 vice the G33 chipset (what the computer shipped with). My computer won't start.  I can boot from the DVD - ROM drive using a Windows 7 upgrade disc and install it without losing everything on my hard drive?

  Set of utilities to test for computer HARDWARE manufacturers:

  Note: If you are OverClocking or use any automatic overclocking BIOS features, Intel EIST or Turbo Mode (turn off).
  then back at the speed of stock as a starting point.

  Disconnect the other internal hard drives and external USB devices.

  First try running Memtest86 +:  It runs from a floppy disk or CD, you must remove or
  confirm whether your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test - CD Bootable:
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD)
  and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD
  For Western Digital disks using WdDiag: http://support.wdc.com/product/download.asp?lang=en
  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Once Windows is installed:

  Of device drivers: Have you installed latest device from the manufacturer of the motherboard drivers?
  Check their support site for the latest drivers as the CD that came with the motherboard may have
  older less stable drivers.

  Check the manufacture of graphics card download site: Download and install the latest drivers for Windows 7
  for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
  or equivalent ATI.

  Prime 95:
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the 'stress test' option for 3 hours or more.
  If your PC can pass this test, your memory and CPU
  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:
  The temperature of each core of the processor.
  Note: For the overclockers using stock radiator and cooling fan Intel/AMD, you can expect a temperature range of
  35 to 40 ° C at idle and 60-65 c max when running Prime95.
  http://www.alcpu.com/CoreTemp/

  CPU ID (CPUZ): http://www.CPUID.com/cpuz.php
  Watch the clock speed of the CPU under various conditions of loading
  (when using speed step technology Intel EIST).
  #1 Note:
  CPU - ID has two tabs (memory and SPD) that indicates the actual speed of the memory and 'SPD' tab displays the nominal speeds
  for each memory location is full.
  #2 Note:
  COMPARE the two values, the actual speed should not exceed the rated speed of your memory.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
  voltages, temperatures, fans speed.
  http://www.CPUID.com/HWMonitor.php

  Test of Stress of FurMark GPU (graphics card):
  http://www.oZone3D.NET/benchmarks/fur/

  Pass marks burn in test: http://www.passmark.com/
  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  GPU - Z:
  A utility light, designed for you give information about your video card and GPU.
  http://www.techpowerup.com/GPUZ/

  PC WIZARD:
  A powerful utility designed especially for detection of hardware, also analyses more.
  He is able to identify a large scale of system components and supports the latest technologies
  and standards.
  http://www.CPUID.com/pcwizard.php

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  http://www.partitionwizard.com/Partition-Wizard-bootable-CD.html
  http://www.partitionwizard.com/bootable-Flash-drive.html
  Some of the features and functions include: resize and move partitions, Partition recovery after an accidental deletion,.
  Create partition, Delete partition format partition, convert partition, explore partition, hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  Hiren BootCD
  http://www.Hiren.info/pages/Bootcd
  Hiren BootCD from USB (USB key)
  http://www.Hiren.info/pages/Bootcd-on-USB-disk
  (something more questions)

  UBCD4Win:
  http://www.UBCD4Win.com/index.htm
  UBCD4Win is a recovery CD bootable that contains software used for repairing,
  restoration or diagnose almost any computer problem.

  MyEventViewer - an easy way to display your event logs:
  http://www.NirSoft.NET/utils/my_event_viewer.html

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• My new mouse does not work with my laptop?

  I just bought a new USB mouse and plugged on my laptop, he repeats to me the device is not recognized, but requires no driver, its simple card and its use.

  My windows keep saying that the device is defective, the mouse is brand new.
  My question is... How to solve this?
  or how I turn off my windows and so I can leave my phone manually accept the mouse.
  I need to use it tonight, as its very urgent.
  Many ways
  
  Fazz Shei

  Hi, Fatima.

  Please follow the steps in the methods to solve the material problems and USB question concerning:

  Are you able to connect other USB devices?

  Check the status of the USB device in Device Manager:

  a. go to control panel of configuration-Device Manager,

  b. If you see a yellow exclamation mark next to the device, the driver is disabled and must be updated

  Method 1:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2: Update the USB drivers

  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  Please post back with the result.