New win7 HD data recovery

Similar Questions

• the new Win7 disc replacement does not accept the case key

  Our dv6 - 2173cl end is more the boot, the "freeze" while showing the wallpaper with the taskbar 'framework' as well as the Start button, the HP logo button and the Date/time.  Defective hard drives the check HP tools with 90772-50e656-xd0021(7? wrote down in a bit of a hurry, sorry)-6ou103 error code.  Since the reader would also not 'take' the restoration attepmts (so the HP tools) we thought that a new disc has been a given.  Fast forward...  Now with the new drive in and a new Win7 install (no recovery disk, yes we know) the facility does not accept the key from the sticker on the bottom of the case and Yes Win7 is Home Premium on old and new.  So now, what do we do to get active Windows?

  I found that if you enter the key during installation and enter the key during activation of this always accepts it. Always works for me when I do a clean install of Windows 7 on client computers.

• Pavilion p6537c: Dead Win 7 C drive, should I go direct to 10 for a new disk? Ideas on data recovery?

  Question: Installing an operating system on the new replacement drive:

  750 GB hard drive on my Win 7 Home Premium desktop is completely dead. [See data recovery? below.] With regard to the new replacement unit 1 TB, I don't have recovery discs (my bad) and can get a USB bootable HP for $30 in 5 days.  But if I will Windows 10 in any case, would it not easier to simply direct that, assuming that I can download from the MS site?  Is this possible or do I have a valid Windows installed before 'upgrade '?  I have the serial number of windows etc. since it is a 64-bit licensed machine Win 7 legit bought new at HP.  There cpu: AMD Phenom II X 4 830 (D) 2.8 GHz and 6 Gig of RAM. Tips appreciated!

  DATA RECOVERY question: C drive would not start at all in a local computer store and they refer only to the people of data recovery. Any ideas how I could do this, or at least try, me? Otherwise, any suggestions on the most cost-effective way to get what I can (if any) out of the disc?  I don't have an idea as to why/how it has failed or the status of the Board at this point.

  Thank you very much!!

  Tommy

  From W10 v1511 that you do not have to enter a key when it is stored in the bios, W10 will find that during the installation, so you can just go right to the 10 and spend 8 installation.

  Even if it is not stored in the bios, you can enter a product key valid W7 orW8 during installation of W10 and he will accept it.

• Netflix in Media Center returns a 'there was a problem of data recovery. "Check the works of your internet connection and try again" error instead of loading Netflix data.

  context: a previous thread with an identical title never responded, the problem just disappeared.  Well its been two weeks since then and the problem came back.

  somethings which may or may not apply: internet TV seems to work better in media center.  All updates have been applied to H.P. of Vista SP2. Netflix works fine in ie8 (such as the internet, of course). Tried to delete all the Internet Options, delete browsing history section of Internet Explorer. I get the same error message with my windows 7 professional media center, but netflix seems to play anyway (no game with vista). I recently installed quicktime alternative 2.72 to see what it was and how it worked, then removed and put back in quicktime.

  Tried / symptoms:

  -Remove all the browsing history (econcepts)
  -Same message on Win7pro but works even when (econcepts)
  -Works on Win7 no problem (omegafiler)
  -Works in ie 8 (econcepts)
  -Works in crome (Martin TX)
  -Consensus is that it started around December 30, 2009 (GeoffG1, johnetX, me)
  -Remove and reinstall silverlight (omegafiler)
  -Remove and replace netflix plugin (omegafiler)<- how="" did="" you="" do="" that="">
  -Netflix says: microsoft problem (Nitestalker)
  -Microsoft is silent (this thread - on vacation?)
  -Same problem on 32-bit and 64-bit VMC (JRSMiamiFL)
  -No applied update (johnetx)<- perhaps="" date="" related="" or="" drm="" date="">
  -Disconnect from netflix, you reconnect again - ultimately the same error (chicagokiwi)
  -Tried to reduce the number of items in the queues to well below the limit of 200 (econcepts)
  -Tried the register / unregister the third wire procedure, no joy (does not break anything else however)
  -Disabled the firewall, no change (econcepts)

  related topics:
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/0c154c0a-1fcb-4353-8c5e-b394e885256d

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/aaab24a0-4BB9-42FA-a5ee-46a733d6560f

  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/f05f69c7-6456-4117-B302-27c08886ea1e

  Someone else knows Netflix not being is not able to connect?  It started yesterday (30/12/2009) for me.  I looked fine the day before without problem.  The message I get says "there was a problem of data recovery.  Check the works of your internet connection and try again. Ok.  I make it work with both my VMC - one with the service pack and the other without.  My OS updates have been loaded in early December, so I don't see how this could it be.  I searched and found this problem has come up before, but I have not found a solution.  I made NO changes to my HTPC.

  Those who have and solved this problem.

  UPDATE UPDATE UPDATE UPDATE UPDATE UPDATE *.

  2009-01-05 has attempted to start Netflix this morning and you know, it works on both my VMCs.  That's the good news.  So now the real questions are:

  Only 20 people reported it as a problem and only 6 on the green button.  I believe that it affected all the world with Media Center.  So why not discussed much?

  It already happened, causes a stir and silently slips without known cause or cure.  How can we find out what caused this and how to prevent it from happening again in the future?

  *******************************************************************************************

• Slow response from phone to monitor data recovery

  hhaving problems with my app Apple Watch (watch OS 2.2) of the iPhone data recovery 6 (iOS 9.3.4). When I click on various watch apps - FaceBook Messenger, Messages, etc., they seem to take forever to recover data. I tried to restart watch it and iPhone without any improvement.

  If I remove the applications from the watch and then reinstall them this solves the problem for a short time.

  Ahy suggestions?

  Hello

  For best performance of your devices, make sure that both Bluetooth and Wi - Fi are enabled on your iPhone (and keep them permanently active).

  Also, make sure that you have installed the latest versions of all applications (on your iPhone: App Store > updates). To install updates for the associated Apple Watch applications also automatically, select automatic App install (on your iPhone, in the application of the watch, go to: Watch My > General > App Install).

  It can help to disable the twinning and re - pair your watch. The app shows on your iPhone takes a backup of your watch automatically when the disparity with the app choose to restore from backup during the whole upward. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code):

  • Cancel the twinning of your iPhone - Apple and Apple Watch Support
  • Set up your Apple Watch - Apple Support

  In the future, notes that new arrivals under watch OS 3 - software update that is should be out this fall / Fall - include much faster loading of your favorite applications, including applications to launch immediate up-to-date information.

  More information:

  http://www.Apple.com/Watchos-preview/

• SSHD Toshiba MQ01ABD100H - Firmware / data recovery problem

  Hello!
  I have the mission critical data on a MQ01ABD100H of Toshiba to SSHD which was in a Sony VAIO for less than one year who decided to stop working from one day to the next. All I care about is the data. A professional data recovery company apparently reputable rated player, told me that it was a "mechanical failure", said they could recover the data and gave me a quote of $1500.00. A week later I was told something different; They said the platters and heads seem to agree and the problem seems to be on the circuit board and/or flash drive, and they didn't know how to recover the data. They told me that they have consulted Toshiba too. I asked them if they replaced the pcb Board and they would not tell me or answer questions more. I have the drive in my hands and am looking for options. I really believe that my data is recoverable if the trays are okay, right?

  Here's what I know for sure; the bios of the machine of Sony VAIO Windows 8.1, correctly recognizes the drive. However, it does not start and is not accessible or recognized with cmd prompt Windows 8.1 UEFI options. The drive is not encrypted. After putting the reader into an external enclosure and its connection to another Win8.1 machine, the player starts with no extreme sounds of survey. Slowly, she clicks a few times as if the heads are looking, but then calms down and keeps running quietly. I have installed a Data Rescue PC3 software that recognizes the drive and its attributes correctly but can't read or clone. I have the Partition Wizard software mini tool, which recognizes the drive correctly, but shows the drive as being unreadable.

  That's what I'm trying to do. I'm looking for a donor on mine, with the same model drive, date, firmware, site, number of PCBS, hard drive code.

  Now, here is my unknowns and I appreciate everyone a preview with these. If I change the pcb edge myself, I need still more likely transfer the firmware for the new Board of Directors, even if I try it without doing it. I don't know where the firmware is stored, is there a rom chip or is it stored in the Flash Player. I'm not certain if, with this model of SSHD, if this can be done with replacement of the chip or the software? If it is stored on the Flash drive how is available independent of the HHD part? Must the reader Flash itself be harvested? But what happens if the flash player is bad, how can the firmware ever be recovered? Any ideas anyone? ... other than myself shot in the head, I'm kidding. I think that this may be a common problem that will often not resolved.

  I have the drive in my hands and am looking for options. I really believe that my data is recoverable if the trays are okay, right?

  I am not an expert but if applications cannot access the data and cannot read data from the SSHD then you will need professional help...

  I found the storage Toshiba page where you could get details on this SSHD
  http://Toshiba.SEMICON-storage.com/e...ient-sshd.html

  Mate good luck...

• Question Equium L350 - 10L new HARD drive and recovery

  Hi all.

  My L350 - 10L has a HD death. Just does not start. I tried the HARD drive recovery system, but after it formatted the HD I got a message saying that the image file is corrupted. I removed the HD and connected to my desktop to save personal files (before I tried the recovery) and there were real issues reading the disc. I got most of the documents & E-mail eventually (had to run a lot of check disk runs using a 3rd party disk partition software). I think that the drive is actually physically damaged somehow.

  I'll need to buy a new set of Toshiba recovery disks (too long a story to explain, but it's basically my fault), but my main question is this: if I buy a new HD still recovery disks to restore my system to its original state even if it isn't the original HD? There, I guess I mean will the recovery discs recreate the 3 partitions - WinRE (Hidden), Vista C: and D: data and set the correct boot and information industries? And I suppose that a secondary question who would be the HD should be the same size as the original one (120 GB said / 111GB actually)?

  Thanks in advance.

  Post edited by: GrumpyTrucker

  Hello

  > Over there, I guess I mean will the recovery discs recreate the 3 partitions - WinRE (Hidden), Vista C: and D: data and set the correct boot and information industries?
  The Toshiba Recovery disk will define the laptop (and HARD drive), the factory settings.
  This means that the recovery DVDs will format the whole HARD drive and it will create the partitions and all the rest as on the first day of purchase.

  I hope I could bring a precision...

• Satellite L850: Drive HARD Firmware problem prevent data recovery

  Am a little confused and need a simple explanation
  My HDD L850 died under warranty and was sent to the people of data recovery to recover the data before entering new drive under warranty.

  I am told that my hard drive has a fairly unique combination of firmware and the drive that prevents the recovery until they get this firmware. Now 6 weeks after it happened I stll wait.

  Someone in support could explain to me in simple terms, why this firmware is the problem cause and so far can only be obtained by your partner data recovery company?

  Hello

  I think that you will here get a correct answer, why the people of data recovery needs of these packages since it is a user forum.

  But to my knowledge all the 2.5 hard drives and SSD drive supports various firmware.
  These firmware tells the hardware how to interact with the operating system.

  It seems that people in data recovery needs these packages in order to get access to the HARD drive, and I presume, without the compatible firmware, it is not possible to recover the data.

• Help to remove the partition on a hard drive and data recovery

  I have two hard drives in my PC, the C: drive is 80 GB, and the F: drive is 120 GB.  The second drive (120 GB) is divided into two partitions.  I just deleted the partitions and makes the hard drive again in a single disc, however I had some important files on the F: drive that I thought I had copied to the C: drive but they are not there.  Is there anyway that is using the software I can return the drive to two drives and recover my data, please help

  Hello

  First of all, do not use the hard drive. This can make things sunk. A few things may already be unrecoverable. I would even delete the drive letter to stop inadvertently automated processes to use.

  There are two ways I can think of.

  1. buy a partitioning software disk that supports the undelete partition. On windows XP PartitionMagic was a very good product if symantec will still sell it. Given that Symantec has continued to develop, I had to switch to product partition Paragon. Sound was trash to some things, cloning in particular a double boot with loads of partitions - it has an undelete function which I didn't use. The fact that you have created a new partition could mean that the restoration may not work. You may need to delete the current, probably empty, partition everything first and then perform the restoration.

  2. buy a data recovery software that will scan the hard drives, including the unpartitioned space. I chose R-Studio and it was very good stuff even recovery from hard drives that fail. It was not 100% effective, but it is perhaps down to the severity of failure rather than the product. In situations like yours, it was very effective.

  Please mark this as useful or response if applicable.

  Tricky

• Netflix in WMC «there was a problem of data recovery...» »

  I installed the latest round of updates (Ultimate) of Windows Vista and it apparently burst Netflix in WMC.  Now, I get the error:

  "There was a problem of data recovery. Make sure your internet connection is working and try again. »

  Internet works on the machine.  I reinstalled Silverlight (v4) and Netflix for WIndows Media Center.

  How to diagnose and repair the problem?

  Thank you!

  Keith...

  Sorry for the delay, but I've been busy (in my free time) trying to get this to work.

  I gave up trying to resuscitate MCE and installed a brand new Windows Vista Ultimate Edition with Service Pack 2.  After apply all WIndows patches and installation of Silverlight, I have the "Netflix" element in MCE.  He invites me to install, what I'm doing.  However, every time I start MCE and go to Netflix, he tells me to do reinstall - no login screen.

  I tried all the "mcupdate" article and then supported your steps above, but no go.

  I did this twice, so it wasn't just a fluke.  Apparently, the part of Netflix to MCE is not detect the plug-in that it installed.

  Any thoughts on what to do then?

  Thank you again...

  Keith...

  Later: I ran "mcupdate" after the steps you suggested, and now Netflix is gone again!

  Later: same problem on my other computer running MCE and Vista.  I don't want to mess up this computer so I left as what.

  Later: opening of a new post on problems become Netflix to work with a clean install.

• Help! Data recovery!

  Hi all

  My laptop was working fine when suddenly it became very slow access to the data for a couple of days. The next Win7 has not loaded up. Now I can't even the Dell BIOS screen upwards and the course when I turn it on. Just a black screen (is powered but).

  I thought that it would be a software problem or a virus, so I brought a small repair shop. The guy said that when he connected the HARD drive up to his machine, he makes noises and he couldn't access my data. He said that I should replace the HARD drive and to recover my data, I could send the HARD drive damaged in a laboratory where they could use their spare parts instead of those damaged to perform the data recovery for me, but it would cost around HKD$ 5,000 (USD$ 650).

  This sounds a little expensive. I recently bought an external DRIVE to backup drive and had not saved all my files at this point. My Dell warranty missed just after it happened so I don't have the chance to call on this subject. If anyone knows of any company that will perform the recovery of data on my HARD drive (or Dell will do it for a lower price), please let me know: I am desperate at this point!

  Thanks for taking a peek

  Wes

  Data recovery is very expensive.  The price is relatively cheap compared to the prices I saw here in the United States.

  It's lesson on the conduct of periodic backup on an external device.

  Dell, to my knowledge, offers no service recovery.

• This allows backup, data recovery and AntiVirus Server

  Hello

  Am new to the CWC and I wanted to know if there is an option in the CWC to enable backup, Server data recovery and install Antivirus for commissioning a virtual machine of the CWC. It would really help if someone could share some links for the same or any document available to her.

  Thank you

  Anish

  Anish, don't know if this is related to your original question, but if I understand correctly, you want to know how to configure which models are available for users to order. This first through these images through CloudSync automated discovery. Then, the supplier (CPTA) uses the portlet to manage an Infrastructure of Cloud Computing for review 'Discovered' templates/images and mark them as "Registered" or "ignore". Only "Registered" models can be selected when ordering a virtual machine. "Registered" items can be removed temporarily from the selection by putting in "Maintenance" mode

• Seagate Barracuda 7200.11 failed drive and data recovery

  I own a HP Pavilion Media Center m8350f PC witch came with a 750 GB Seagate Barracuda 7200.11 internal hard drive model #ST3750630AS.  After about 3 months, the system didn't recognize the hard drive.  Having initially contacted HP tech support in December, they told me to send the PC to them for hard drive replacement.  They were unable to diagnose anything other that the drive had failed.  Yet I have to send it, because I know that the drive works, it's just that it is not recognized by my system.  I need a car access.  No replacement drive.

  I discovered recently, Seagate press release that they shipped a defective lot of readers with firmware.  In their initial press release, they stated:

  "We believe that the vast majority of customers are no disruption related to this issue, and that concerned readers can be used as is. But as part of our commitment to the satisfaction of the customer, Seagate offers a free upgrade of the firmware to respond proactively products likely to be affected. This new update fixes compatibility problems that have occurred with the download of the firmware provided on our Web site on 16 January. We regret any inconvenience that firmware problems have caused to our customers... " In the unlikely case where your drive is affected and you can not access your data, the data still resides on the disk and there is no data loss associated with this issue."

  Now that the real problem has been identified, what alternative support is available from HP at this topic?  HP will push their provider, Seagate, to extend this offer to the customers of HP?  Can HP unlock these discs?  The average consumer cannot ' of the Nations United-brick ' these readers with the new firmware and I guess, it's relatively easy for Seagate (i365) data recovery company to manage.

  Bottom line: based on my understanding of the problem, readers have not suffered loss of data, they are stuck in a 'busy' State and must be unlocked.  This is a critical point, because I believe that no one really cares to know if they get a new drive.  They want to only be able to access their data and awaken the drive is all it takes.

  My previous post was the original incorrect announcement of Seagate Barracuda chess.  The message I pasted was monitoring them upward.  The correct statement is below:

  "We offer free data recovery, because the drive information is not deleted. He's just made inaccessible by this suspect firmware,"spokesman of Seagate Michael Hall.

  Seagate said it has reissued the firmware originally proposed last Friday, saying: he has isolated the bug in the firmware in a "limited number of Barracuda 7200.11 hard drives with the SATA drives based on this platform of products, manufactured until December 2008. "In some circumstances, data on hard drives can become inaccessible to the user when the host system is powered on," Hall said.

  "Although we believe that the vast majority of customers are no disruption related to this issue, as part of our commitment to the satisfaction of the customer, Seagate offers a free upgrade of the firmware to respond proactively products likely to be affected", he added.

• Why my Illustrator CC is not so much announced the visible data recovery area for me?

  I just saw that Illustrator CC has the new feature to be able to recover files after the Illustrator crashes but when I go to

  > Preferences

  > file handling and Clipboard

  ... data recovery area I've read about is not there.

  As tone said, what version you are using? Data recovery works in CC2015 (19.X.X).

• Types of backup destination VMware Data Recovery

  IM test VMware Data Recovery and reading it can save to different destinations. Here's a sentence from of the Administrator's guide.

  You can store backups on network, VMDK shares, or RDM.

  The only option I see is the network share and make a folder called VMwareDataRecovery with other files and folders in it. If I backup more 1 VM to this nextwork share looks like it mixes everything together. I was under the impression that you can save in a file single vdmk.

  The only options I have under VMware Data Recovery for Destinations are Refresh, add a share of Nework, Format, Mount, Unmount, Extend and integrity check

  Remove you it from the virtual computer by means of the settings?  If so, have you selected the option to remove the virtual machine and remove the disc?  If you have them removed from the virtual computer through the settings, then you can delete browser data store.  It will come to your space.  Also, see IO errors is because you took the disk to the virtual machine without removing firstly by vDR Console's Configuration.

  That said, I would do the following:

  1. Ensure that the VM vDR does not any VMDK attached other than the VMDK root which is 5 GB in size.

  2. Open the browser of data store and make sure that the former VMDK you created have disappeared.  If not, select them and click on delete.

  3. Go to the Configuration Console for vDR and look at Destinations of backup to make sure there is nothing there.  There should be nothing in the list of destinations, if there are, remove them.

  4. After checking the above, create a new size 15GB VMDK.

  5. Restart your virtual machine of vDR

  6. Go into the Console to Setup vDR and select the disk that you created in the backup Destinations, do a right click and select format.

  7. The size should report something similar to what my screenshot of previous shows.

  I would like to know if that works for you!

  If you have found this helpful at all prices please points using the correct or useful!  Thank you!