Newbie on paths question

Similar Questions

• newbie Y560P laptop questions

  Lenovo forums are very informative and I looked for answers to my questions and have found some but not all. I recently (St Patty's day) ordered an ideapad y560P. I should have asked these questions before buying but there was an e-coupon deal that ends the day of St patty, I had wanted a laptop pretty advanced for a while so I jumped. Life is not perfect!

  1. a clean install of windows is possible with recovery disks that Lenovo provides? If this is not the case, what is the best way to do it?

  2. the Y560P can fully utilyze the new SATA 3 SSD as boot drive? Void the warranty?

  3. wait for Lenovo to ship my laptop until the Sandy Bridge sata port questions/reminder are developed?

  4. someone here successfully using imaging software (like Acronis true image} on their laptops?)

  Sorry for the newbie questions. I built my own desktops for years, but this will be my first laptop. Time passes! Thanks in advance for any help.

  Hey, I'll do my best to respond to these:

  (1) actually, no discs are technically provided by Lenovo. Your system comes with a separate, partition that contains a recovery image. That being said, you can create a set of recovery disks by running their usefulness (comes pre-installed). When you use these disks, it basically as a duplication process. So yes, you can do a clean install, if you think it their image pre-built a clean installation

  (2) not sure about the 3 SATA drives, but drives does not cancel your comprehensive guarantee. I would always keep the original drive where the system needs to be sent, but I think that the RAM and CPU are considered as 'evolutionary customer options' and are therefore not guarantee-killers.

  (3) from what I've read, Lenovo has already stopped the lines with questions of Sandy Bridge. None of these units should be delivery to consumers. If I remember correctly, it only affected some of the i7 lines. If you have concerns, you can always call Lenovo with your serial number, and they can check if the unit is affected. However, Lenovo has been very quick to fix this, I just couldn't see their shipping defective units known to customers.

  (4) Acronis and Ghost work quite well, assuming it is a standard drive. I could not find any problems with people using either a product on the readers of the so-called "hybrid".

  Hope that helps a bit!

• Path question

  Fundamental question! When a space is no longer a space at the bottom of the menu path to click out of the way, how can we get the path no longer be visible in the document window?

  If you have any of the selected path tools then you can press the ESC key to hide the path.

  If you have selected another tool like the move tool, you can press A, press and hold the key for a split second and then press ESC, then who should hide the path and to return to the previous tool.

  If the points are selected, then Enter/Return works instead of ESC

• newbie triggered custom question

  Hi gurus of Labview:

  It could be a very simple question for you guys, please provide some tips.

  Here's my scenario measure: I need monitor output of the sensor which is a signal voltage (to AI0), I just need to get the voltage reading when I get a trigger signal to axis to another (PFI0). I would like to save to a file .txt with the news. on the value of the voltage and the time stamp of each measure. With a simple while loop and the DAQ assistant, I can get the measure to start when a trigger is detected on the PFI0, however, the measure will now continue to operate after that. Instead, I want the system to measure a voltage value, then wait for the next trigger signal. I'm pretty new to labview, so it will be very appreciated if someone can point me in the right direction.

  Thank you very much.

  Shao

  OK, after reading this link given above about 1 sample (timed HW) I think that what you really want is continuous samples with the sample on your external clock clock.

  Apparently there is no buffer with the 1SHWT (I'm short hand here).  If you miss one, you get the overflow error.  That tells me your loop is medium to slow or your pendulum goes faster than you think.  By going with continuous samples, you will not have to worry about this.  You can simply take as much data as you want and save the heap in the file.  This will make things work a little easier.

• Newbie BB development question

  Hello eveyone. I hope this is the right place to post this question, but I'm looking for advice. I'm new to the development for BB, but since 3 days I did a lot of reading. The only problem with this is that the more I read more confused I get. I have developed solutions ASP.NET, but never anything like that for mobile devices.

  Here are my thoughts on what I would do:

  -Create a Web page for the BB, which goes to a SQL Server, accessing a view and extracts the data in a data Repeater or a gridview for viewing.

  I have an IIS server running locally and can be viewed on BlackBerry now. I've set up and you can check out. WML and. Pages HTML to it very well.

  My question is this. I read about this plug-in for Visual Studio 2008. I downloaded and installed successfully.

  I do not know the following:

  -Can I do what I would do without BES?

  -What would be the best way to go about this? A few suggestions on what would be the best way to approach this project.

  Any guidance would be greatly appreciated.

  Thanks in advance,

  Bob

  psu99 wrote:

  So I can just use Visual Studio.net 2008 and create a sample page. I use the PlugIn which can be downloaded or can I just without programming?

  From what you say, you just need Notepad, vim, emacs, any other to design a Web page. The fact that You ' l browse this page with a Blackberry or an iPhone or a Samsung is on top of that.

  psu99 wrote:

  And what you say to me that I didn't need BES... my point of view on what it was only used for PUSH applications.

  You use a BES is required if the Web server is not reachable from outside your corporate network. In this case, you need BES just for its web proxy that will allow your browser to reach a machine inside the LAN. BES can also be used for automatic authentication issues based on the PIN code of your device and/or X.509 private keys that can be installed by the IT company.

• CVP newbie on routing questions

  Hello, newbie here in CVP. Got a deployment with UCCE/CVP 9 X and Conn CUCM/Unit 9 X. No Sip Proxy and the current context we have to route calls to CUCM prior routing to ICM/CVP. I know that's not the best Setup, but there is no budget to spend more managers to call for UnityC to CIM at this stage so all calls will be pretty closely from before CUCM hit ICM. That said, I'm getting conflicting information about how to configure routing. Probably more too read things. From my tests, I need 2 PIMS on every PG to cover both CVP servers which means I need 2 labels VRU to account for each customer routing of the CVP (ie. 121212 and 131313)? I have heard however I need one but my call routing will fail if it is not 2. Is this correct? If this is the case, how ICM knows what CVP VRU label to use when a call is initiated of CUCM to ICM? And how is that redundant PVC without proxy SIP or DNS Srv? Any recommendations would be greatly appreciated.

  No, you build the same label for all customers of routing CVP.

  Sent by Cisco Support technique iPhone App

• BlackBerry Smartphones Newbie with 2 questions, need help.

  Hi guys,.

  hope you can help. I recently bought a BB Curve and think it's great.

  However the LED stopped working. I turned off the unit and removed the battery. When I put it in the LED lights up red, so it must work. I checked my profile settings and all say that the LED must be on. I have changed this setting to disabled, backed up, and then put it back on and saved and still no action led.

  The second question is attachments on my emails. I can't open attachments, photos, documents spreadsheets nothing. I use desktop re-Director. Is it possible to have attachments that are sent using this unit or any other bits of software? I have the only BB at work so I'm not so sure, establishment of a BB server is viable.

  Your opinion would be greatly appreciated.

  There is not all the configuration parameters for the Service of the attachment. The following table describes the supported types of attachments on a BlackBerry

  http://www.BlackBerry.com/BTSC/KB03265

  By default the LED flashes green to indicate that you are in a wireless coverage area. I found it annoying and disabled. Check the setting under Options | Screen/keyboard and turn the LED coverage indicator inactive.

• TCS Media Server UNC Path Question

  Hello

  I have a problem that I hope someone on the forum can help me with. I have classes being captured by the TCS. I want to be able to moved the video captured on another system for delivery. I have a setup of server configuration of media that moves the file using FTP, and it works without a problem. But I prefer to use a UNC path for this rather an FTP server. I have a place in the media server configuration to specify the UNC path, but I don't have a place to specify the account to use to put the video on the UNC path. In other words, I don't know what matters to give permission on the UNC path to be able to write the data to the path. Does anyone know how this UNC path is supposed to be used in the TCS interface?

  Thank you.

  -tracy

  Sent by Cisco Support technique iPad App

  Hello Tracy,.

  I guess you hesitate to grant write permission to "everyone" on the shared folder so that you might try is to grant NTFS permission to the computer object type (tcs in your case), is to allow access to services run by the system account, users try to access the resources within this computer will be refused.

  Best regards / / Andrey

• Oracle certification path question

  Hello, for some time I use php\mysql to create small applications and scripts and I feel that I don't have a correct orientation on the structure of a database.

  I want to know how to manage oracle databases and set up the infrastructure, but the question would then become:

  certification DBA 11 g offers these fundamentals? Or is there a place to start?

  answering my own question:

  Database Oracle 12 c: Introduction to SQL Ed 1.1

  These are the basic principles

• newbie JDeveloper Setup question

  Hey people.

  I'm a new ISV SE working to familiarize myself with things.

  Environment:

  Windows7 64 bit

  Java version "1.8.0_60".

  Tries to install:

  Installing Oracle JDeveloper Studio

  jdev_suite_121300_win64.exe

  When I run the installer, it dies on the market 'Prepare' with this message:

  java.io.IOException: C:\.oracleprinters\Middleware\Oracle_Home\inventory\Queries\jdkGeneralQueries\12.1.3.0.0\jdkGeneralQueries.jar (the system cannot find the path specified)

  My machine has a C:\.oracleprinters directory, but this subdirectory is not there.

  Advice would be useful?

  
  Carl

  Have you been asked to a Jdev installation folder in?

  You have another installation of Oracle on this pc?

  I never heard of puff, a folder named .oracleprinters, but it can be created by the installer itself. If it is empty, you can remove it and try again.

  Did you start the installer as an administrator?

  Timo

• Compound path question

  Apart from their use to cut holes in the forms, are there other reasons to create a compound path? They seem to be similar to a grouping of the railways so I was just wondering.

  They are not at all like groups. Transparent tracks get a trace in the layer panel, no container with sub-paths (as a group of the East). You will need desperately transparent trace when you want to make several paths clipping mask. Also for some operations of pathfinder with multiple paths

  There is a chapter in the manual which compared groups for the compound path for compound forms.

• Newbie on MemoryStick question

  I am to evaluate vm workstation for our company and have no real experience with vm workstation.

  I'm hosting on windows 7. I created a machine virtual windows XP without any problem at all. Here is the question, when I'm on windows xp and I insert a USB / flash drive, virtual machine software allows me to connect to it and it displays in the status bar, but I can't see or access in the my computer window.  I really need to be able to copy files from the drive flash on windows xp machine... I read everything I could find, and it seems to me it should work... Sorry if this is a stupid question, but can someone tell me what I'm missing?  Thanks for your help!

  Welcome to the forums!  Do you have the VMware Tools installed in the virtual Windows XP machine?  You should be able to drag-and - drop between your Windows 7 host machine and the virtual machine.  You can disable the removable device (USB key) in the virtual machine to the host o/s.  You should then be able to open the drive, and then drag and drop the files / folders to your Windows XP VM.

  Please keep us informed.

  Good luck... Bruce

• Newbie on permission question

  Hello

  I have an operational 5.0.1 AMS. But I'm a newbie to AMS.

  I want to implement the authorization features for the AMS for streaming (vod) saved mp4 files.

  In a first time, for clients Flash using the RTMP protocol, subsequently for iOS/Android devices using HLS/HDS.

  My plan is that the client sends one identifier internal video to flow and a session id.

  These two parameters should be passed to AMS to another remote server with a PHP API or a SOAP web service. This remote server checks if the video might be listened to (Simplified) and returns true or false to the AMS.

  Now, my problem is that I have no idea where to connect to the communication between the client and the server.

  So far I got the normal way to proceed would be to listen to certain events in the main.asc.

  All the examples I found to date only show how to manage application.onConnect.

  But I would like the AMS to react on the command of NetStream.play (), sent by the Flash client.

  How is that possible?

  And, is it possible to do for HLS streaming that does not rely on Flash clients?

  Thank you very much in advance

  Hyper

  You pass additional arguments to the connect function:

  NC. Connect ("rtmp://myserver.com/test", "12345", "abcdefgh");

  On the media server, definition of the function onConnect to take as many arguments as you expect:

  application.onConnect = function (client, videoID, sessionID) {}

  your code to manage the client connection here, probably to check the values to the remote server

  }

  The customer is always present. You can add additional arguments after her.

  http://help.Adobe.com/en_US/flashmediaserver/ssaslr/WS5b3ccc516d4fbf351e63e3d11a11afc95e-7 edfSSASLR.html #WS5b3ccc516d4fbf351e63e3d11a11afc95e-7fe1SSASLR

  You need to pass arguments in the same order as the onConnect function.

• Newbie on antenna question

  Hi, I got a 2 x 4402 WLC and 25 x 1242AG TOWER to deploy. None of the ROUND came with the antenna. They are to be deployed in an office environment. The absence of antenna would prevent me from editing above the suspended ceiling, or must they go on the inner walls instead? I could not do a poll on the site but as it is still a construction site.

  Hi Brian,.

  You know, I don't think that there is no 1242 with antennas :(

  «The Cisco Aironet 1240AG series Access Point is a fixed configuration access point, dual band IEEE 802.11a/b/g. built in to the access point are two radio stations, each with * dual diversity antenna connectors.»

  http://www.Cisco.com/en/us/prod/collateral/wireless/ps5678/ps6521/product_data_sheet0900aecd8031c968.html

  You would need something like the series 1130 (with integrated antenna).

  http://www.Cisco.com/en/us/products/HW/wireless/products_category_buyers_guide.html#http :// www.cisco.com/en/US/products/hw/wireless/products_category_buyers_guide.html

  This does not mean you will need external antennas for use with the 1242.

  I hope this helps!

  Rob

• Is it still possible... newbie link/photo question

  I know that I can link something to a whole picture. Is it at all possible to have few links located on different spots of a photo? Someone asks me to do it for our site, but I just can't understand it. I touched only in Dreamweaver and I don't know even where to look in the different help pages! If someone can point me in the right direction, it would be great. If it helps, here is the page that they want me to work this way... http://www.hartleynature.org/ecology/1918.html

  Click on your image, open your properties window, bottom left (I'm in CS3 so yours may be different), look for card.  Click the tool you want to use (oval rectangle or polygon) and bet on the section on the image that you want to link.  You should be able to go from there.

  Gary