NIPXISM port conflict

Similar Questions

• HTTP port conflict detected...

  Hi all
  
  I'm just new to JDeveloper.
  When I try to run the page. XML file in my project... its giving the below the error message in the log file...
  
  HTTP port conflict detected. The HTTP port is reassigned to port 8063.
  Starting of the OC4J was cancelled by the user.
  The return port assignments to: HTTP = 8062, RMI = 23892, RMI - SSL = 24044, JMS = 9228.
  The IIOP return port assignments to: = 5656 IIOP, IIOP-SSL = 5657
  
  
  If I put the HTTP = 8062 value in 'Embedded server OC4J Preferences', his tent to assign the value HTTP = 8063 then my port instance is 8062.
  
  Please suggest me how to go further.
  
  Thank you
  Harish.

  IF you don't have much of a problem, I suggest that you close jdeveloper, delete the folder system and myclasses and try again. Even in this case if the problem is not resolved, I suggest you to unpack a fresh zip for Jdeveloper.

  Concerning
  Sumit

• Essbase Port conflicts

  1) looking for ball Essbase, the only way to determine Port conflicts and the only way to solve will EMP and reconfig?
  (2) if the addition of an external device such as a modem card or services to wide band is there a way to prevent port proactively conflicts?
  
  Published by: user7731932 on May 5, 2009 16:01

  Looking for ball Essbase, the only way to determine Port conflicts and the only way to solve will EMP and reconfig?

  N ° kill the essbase or stop the essbase and then issue a netstat command in cmd prompt and look at this report. For example if you said 33000 to 34000 in the file essbase.cfg if you see profits of this range, it means you have port conflict.

  (2) if the addition of an external device such as a modem card or services to wide band is there a way to prevent port proactively conflicts?

  ACC to me there is no way.

  Mink.
  http://newhyperion-blog.blogspot.com/

  Edited by: Mink2 may 6, 2009 06:26

• Port conflict warning

  Hello
  
  I'm new to OAF and my jdeveloper became very slow this morning.
  Until yesterday it worked fine, and I have not done anything since then.
  
  I get the popup when running the jdev which I've never seen before.
  
  "Port conflicts were detected, and the ports affected were automatically reassigned to available ports... »
  
  and it takes a long time to run the page.
  
  What could be the problem?...

  I think that some jdev double instance is running in the background in your system.

  1 close your jdeveloper and go to Task Manager
  2. check if there is any processes running as "javaw" & "jdevW", then kill them all.
  3 start the jdeveloper and try to run the page.

  Prasanna-

• Satellite A10: modem port conflicts - error: 633

  Hello

  I currently have a laptop satellite A10 but im having trouble to connect to internet via modem, I have installed a new driver for my modem (modem psi) and when I try to dial up right now get error: 633 could not open port due to a conflict of port or its propaly not configured, I downloaded a new driver, but still nothing.

  I checked the ports/Device Manager and there is no port for the modem only a port for a printer of suggestions on how to solve this problem?

  Hi guys

  I ve searched and studied a lot and found this solution provided on the Microsoft Knowledge base.

  Check this document:

  * + Error message: the Modem is not installed or configured for + *.
  http://support.Microsoft.com/kb/q191444/

• Headphone to push port conflict

  Hello

  I'm developing an application with support for push, I have an application that listens to the push requests and a user interface application.

  My application works very well on BES, but I want to give another feature to warn the user if the specified port is available or not. If the port is already linked, then what application has acquired this port. Is there an API to find out the name of the application that listens on a port?

  Waiting for your answer!

  Kind regards

  Pulkit

  No, (yet) there is no such api.

• Passed the port, conflict with VPN

  Hello

  I have a WEB SERVER, I want to share, this bellows port forwarding work well:

  I mean by that:

  The WEB SERVER is 192.168.10.10 on the local network and on the WEB, it's 81.83.XX. YY:8095

  When I try that it works with VPN ON or OFF.

  If I make a VPN TUNNEL, the link above and still work, but I can't see it in its original address: 192.168.10.10

  Here below a small part of the original manuscript and half of the solution:

  IP nat inside source static tcp 192.168.10.68 5800 interface FastEthernet0/0 5800

  overload of IP nat inside source list 170 interface FastEthernet0/0

  IP nat inside source static tcp 192.168.10.10 80 interface FastEthernet0/0 8095

  IP nat inside source static tcp 192.168.10.68 5900 interface FastEthernet0/0 5900

  overload of IP nat inside source list interface FastEthernet0/0.245 NAT1

  !

  access-list 150 permit ip 192.168.10.0 0.0.0.255 172.16.0.0 0.0.0.255

  access-list 170 refuse ip 192.168.10.0 0.0.0.255 172.16.0.0 0.0.0.255

  access-list 170 permit ip 192.168.10.0 0.0.0.255 any

  SOLUTION:
  With this I can access my server VIA VPN, but because of that I removed the forwarded port, the 81.83.XX. YY:8095 no longer works.
  No idea if I can do something in an ACL?
  IP nat inside source static tcp 192.168.10.68 5800 interface FastEthernet0/0 5800

  overload of IP nat inside source list 170 interface FastEthernet0/0

  IP nat inside source static tcp 192.168.10.10 80 interface FastEthernet0/0 8095

  IP nat inside source static tcp 192.168.10.68 5900 interface FastEthernet0/0 5900

  overload of IP nat inside source list interface FastEthernet0/0.245 NAT1

  !

  access-list 150 permit ip 192.168.10.0 0.0.0.255 172.16.0.0 0.0.0.255

  access-list 170 refuse ip 192.168.10.0 0.0.0.255 172.16.0.0 0.0.0.255

  access-list 170 permit ip 192.168.10.0 0.0.0.255 any

  Best regards

  Didier

  Didier,

  I'm sorry for the delay!

  I'll try to help you with this issue until he gets is resolved :-)

  Now... Certainly, I think that the best solution is to have a static IP address so that we can fill with a roadmap, which is an option?

  Federico.

• Detected port conflict

  Hi all
  
  I get this error when you try to run this PG. * simple returns the Compilation complete reconstruction with 0 error, a few warings *.
  
  
  Error
  
  From OC4J uses the following ports: HTTP = 8993, RMI = 23894, JMS = 9235.
  
  D:\jdevbin\jdk\bin\javaw.exe-client - classpath D:\jdevbin\j2ee\home\oc4j.jar;D:\jdevbin\jdev\lib\jdev-oc4j.jar-Xbootclasspath/p:D:\jdevbin\jdev\appslibrt\ojdbc14.jar;D:\jdevbin\jdev\appslibrt\nls_charset12.zip
  -DFND_JDBC_STMT_CACHE_SIZE = 200 - DCACHENODBINIT = true - DRUN_FROM_JDEV = true - mx256m - Dhttp.proxyHost = 172.16.2.166 - Dhttp.proxyPort = 8000 - Xverify: no
  -Doracle.j2ee.dont.use.memory.archive = true - Doracle.j2ee.http.socket.timeout = 500 com.evermind.server.OC4JServer - config D:\jdevhome\jdev\system9.0.3.5.1447\oc4j-config\server.xml
  Wait for the server to complete its initialization...
  
  Fatal error: unable to write to the transaction log
  (/ D:/jdevhome/jdev/system9.0.3.5.1447/oc4j-config/log/transaction.state), the possible reasons are that Orion does not have permission to write to the file, or that another instance of the server is already running with this (more common) configuration: cannot modify the transaction log
  
  Process has finished with exit code 1.
  
  How to overcome this error?
  
  Thank you
  Christelle

  Hi Chase,

  Restart the computer once and then let me know if it still exists...

  Thank you
  Gerard

• Cannot sync. -Com port in use error

  Win7 64 bit, PalmDesk 6.6.6, IR USB dongle. Tungsten E

  Has been able to synchronize the first two times with the new IR USB organization. I ended with triple calendar entries so finally was able to remove old items out of PalmDesk and after doing a hard reset on PDA, could clean the scheduling issues so I thought everything was OK.

  Then tried another HotSync and kept getting an error on the PDA "Cannot start the HotSync operation because the port is currently in use by another application"

  Spent 2-3 hours to get here and other sites for possible solutions. Found none so tried to Soft Reset and then reset hot but neither worked. Finally I did a Hard Reset.

  Was able to do a HotSync.  It took 6:30, but it does not seem complete.  Note that my memory is only half full

  Now, the real problem.  I wanted to see if I could do a HotSync and did not take hours to complete.  But still, I get the port in use message.

  The message comes even if the PDA is not connected to the PC by IR isn't something in the PDA.  He was going to install dbFix, but since I can't synchronize I can't install it.

  I note that after the Hard Reset did only 3 options under connections now, I have 6. There is an IR to a PC/handheld, but the details show that it uses really Cradel/cable. There is an infrared for GSM phone but I can not remove or change it. Also of IR to PC with a speed of 28.8 by default.

  Solutions, ideas or even wild guess appreciated.

  WyreNut

  Thanks for the reply, but you are not the first to suggest not correctly the problem was in the PC.

  I have finally resolved and am posting the investigation and the resolution here in the hope that others can solve the problems of strange synchronization they could find out by doing a similar detailed investigation.

  The error message not being able to sync because the com port has been used pop up would immediately after recording HotSync. I without having to be connected or even close to a PC to get this error message. I have confirmed that being in front of PC with IR, equipped of Vista 32 bit, so it wasn't a problem with Win 7 64 bit either as I had been able to synchronize PC Win 7 approximately 4 weeks earlier.

  I had 4 chat sessions with Palm TREES, where they provided a number of suggestions essentially to tell me that the problem was Win 7 based or 64 - bit based or that I did a Hard Reset if fixed (none of which were correct).

  I tried a number of sweet, hot and hard resets. The only time wherever I could sync was after doing a Hard Reset and synchronization takes then 3.5 HOURS to complete. I could never do a second Hot Sync that I always get the error message.

  I finally discovered that the list of connections is changing and the individual setting for one of the original connections was changed when I did the sync.

  After a Hard Reset, there are three connection options:

  PC Via cable/home station, Modem Via station home/cable and IR for PC/handheld Via infrared

  When I ran the Hot Sync more than two connections have been added to the list

  IR for GSM and GSM BUT phone serial

  The surprise that took a few moments to discover that the PC/handheld Via IR computer had its details changed to home/IR obviously cable station, I could use this connection to synchronize this is to create a custom connection which was the PC Via IR.

  The dropdown under HotSync would present the old PC/Pocket PC Via IR, but it does not work because he didn't was more IR I would choose the custom, but he made the mistake of com Port conflict

  The SOLUTION was to delete all backup and archiving files, install the PC off, do a Hard Reset of the PDA and then do a HotSync.

  This time sync took only 5 minutes, the connection list has not been changed and the settings in detail for PC/handheld Via IR were not changed.

  I don't know when the commands of GSM phone has been added to the list of options on the PDA, I never used the PDA as a phone. I'm not even sure who's App adding the GSM phone files. He could have been there for years I never had problems with synchronization with USB port and a XP machine. Even the first synchronization IR on Win7 64 bit machine worked so I thought everything was OK.

  Thanks for the suggestion anyway.

• Model a block synchronous dual-port RAM with LabVIEW FPGA

  This question caught my attention recently.

  I am trying to model a particular design element called "RAMB4_S8_S8" with the LabVIEW FPGA module. This element is a block synchronous dual-port RAM allowing simultaneous access to two ports independently from each other. That being said, a port can perform read/write operation to this RAM while at the same time, the other port might be able to do the same thing. There are two opportunities of possible port conflict, however. The first is when both ports are trying to write to the same memory cell. The other scenario is when a port writes in a cell memory while at the same time the other port reads from it. Other than that, everything should be a legitimate operation.

  In order to reproduce this I select memory block that is integrated into my FPGA target. An interface is configured to be the playback mode, and the other is set to write fashion. For the option of arbitration, I let the two interfaces to be "arbitrate if several applicants only. Then I got a compiler error when I tried to run my FPGA code for this model in a SCTL. The error message is something like "several objects to request access to a resource through a resource configured with option interface" arbitrate if several applicants only ", which is supported only in the single-cycle Timed loop if there is only a single applicant by interface.

  This error goes away if I replace the SCTL with a simple while loop, but not what I would like to implement. So I wonder if there is a better solution to this problem, or is it just the limitation of the LabVIEW FPGA module.

  Thank you.

  Yes, you can use a form of conduct to perform the operations you want in the generations clock cycles, but all the code is inside a single SCTL. Basically, read the first address and storing in a register in a single cycle and then read the second address in the second clock cycle. This would allow you to two readings of valid memory every clock cycle 2. I have included a crude extract to illustrate the concept. The case selectors are identical with address A being connected to the memory in the true case, B in the case of fake address. Your biggest model memory dual port will be intact, but it will operate at 1/2 rate.

  Take a look at the white paper that provides more details on the construction of memory:

  Data on a target FPGAS (FPGA Module)

  The ball on the memory block indicates that memory block double port cannot be applied in a configuration of reading, which is a double ROM. access read/write port must be imitated with custom code.

• port WRT350N transmission problem

  Setup

  Modem ZyXel 660: 192.168.2.1

  DHCP at startup IP 192.168.2.2

  NAT - all ports forwarded to 192.168.2.2

  Linksys: 192.168.1.1

  DHCP at startup IP 192.168.1.100

  DHCP table:

  Office wired IP: 192.168.1.100

  Xbox wired IP: 192.168.1.101

  Laptop1 IP Wireless: 192.168.1.102

  Laptop2 IP Wireless: 192.168.1.103

  I have IIS works great on the desktop and in the future the two laptops.

  Ive tried from outside the local network, and I can connect the destop and all ports associated with IIS and other apps (RealVNC).

  I can see the site on the computer running IIS, but cannot on any other computer in the local network by using its IP address in the address bar http://192.168.1.103:86 /, or its network name, http://laptop:86 /. So of course it doesn't work outside of the network either.

  I have all the correct ports forwarded to the correct LAN IP. I even tried other ports in the thought of port conflicts. STIL no joy.

  port 81 is Office IIS

  Port 86 is laptop2 IIS

  Any thoughts as to what im doing wrong?

  Surely works of port forwarding for wireless connections, right?

  Problem solved, the problem was with the laptop.  Stupid windows firewall activated, some how. Funny thing is that even the security has been settled yet on unguarded.  I do it just after I turn it off, always. So I know I turned it off once before.

• Listening port

  Hello

  I'm new to the development of Blackberry applications. I create a Java - Push application listens to. I could do the work of application (available with Blackberry JDE) HTTPPushDemo. But one point is not clear for me. In the demo, we use 100: port of push server and listen on client applications. I understand that we can use any port other that the 4 small ones. If I use port: 120 to push server and if there are multiple applications on the phone to listen to port: 120 (my request listening and other applications listening), how to make sure that it will reach my application only? Will there be port conflicts?

  Thank you

  Thomas

  you try to open the designated port grow in your App if it is already in use by another application that you get an exception. you add 1 to your port number and try again. Once you have opened your push port successfully, you call a Web service and save the device with the PIN and the port opened successfully.

• Upgrade HD on Portege 3440CT

  I have improved my portege 3440 hard disk for a Samsung 40 MB hard disk, and now when I try to install Windows XP, I always get a blue screen saying that it has detected a problem.

  Technical information:
  STOP: 0X0000007B (0XFAF7B640, 0XC0000034, 0 0000000 X, 0 X 0000000)

  I do a new install of a cdrom Freecom external pcmcia card.
  I get the blue screen after installation load device files and the message "Setup starts windows" appears in the line at the bottom of the screen.
  Any body can help me solve this problem?

  Hello

  This is the first list of emergency assistance:

  How do I resolve the error "Stop 0x0000007B" in Windows XP

  SUMMARY
  Step by step article describes how to troubleshoot error messages "Stop 0x0000007B" in Windows XP. This article describes the problems that can cause this Stop error, including viruses of boot and driver of device or hardware issues problems area.

  If you cannot resolve the problem after reviewing these issues, use the General troubleshooting steps that appear at the end of the article.

  INTRODUCTION
  When you start your computer, you may receive one of the following error messages:
  STOP: 0x0000007B (parameter1, parameter 2, parameter3, parameter4) INACCESSIBLE_BOOT_DEVICE
  Setup encountered a fatal error that prevents it to continue.

  Contact your product support representative. The following State help diagnose the problem.

  (0 x 0, 4 x 1, 0, 0)

  Setup cannot continue. Turn off or restart your computer now.

  You may also receive an error message "Stop 0x0000007B" during Windows XP installation when Setup restarts during the installation process.

  When you receive a Stop error message while the installation program is running, you receive the second error message. To resolve this problem, read the following four sections to determine if one of the issues apply to you.

  If none of the questions apply to you, use the following general troubleshooting steps at the end of the article.

  Boot sector virus
  You may receive an error message "Stop 0x0000007B" If your computer is infected with a boot sector virus.

  Search your computer for viruses. If you find a virus, also check the diskettes for viruses before you use them again.

  Microsoft provides no software that can detect or remove computer viruses. If you suspect or confirm that your computer is infected with a virus, obtain current antivirus software.

  For a list of antivirus software manufacturers, click the number below to view the article in the Microsoft Knowledge Base: 49500 (list of Antivirus software vendors)

  Note You may need to use more than one brand of antivirus software to detect and remove various viruses.

  Important
  If your computer has been infected, it may be open to other forms of attacks. We recommend that you rebuild infected Internet servers by following the guidelines that are published on the CERT Web site. Connected to the Internet servers are servers that function without a firewall or other protection. It is also a good idea to rebuild any other computers that are at risk because of their proximity to infected computers before that you put them into service.

  If a virus has infected your Windows XP computer and a virus-detection program cannot remove the virus and repair the system, you must repartition and format your hard disk and reinstall Windows XP.
  For more information on partitioning and formatting a hard drive with Windows XP Click on the number below to view the article in the Microsoft Knowledge Base: 313348 (how to partition and format a hard disk in Windows XP)

  For more information on how to help protect the boot sector of viruses in Windows XP, click on the number below to view the article in the Microsoft Knowledge Base: 122221 (how to protect the boot sector of viruses in windows)

  Device driver issues
  You may receive an error message "Stop 0x0000007B" in the following scenarios:
  A device driver that your computer boot controller needs is not configured to start during the startup process.
  A device driver that needs your computer startup controller is damaged.
  Information in the Windows XP registry (information related to the way in which device drivers load during startup) is corrupted.

  Windows XP requires a miniport driver communicate with the hard drive controller that is used to start your computer.
  If Windows XP does not have a device driver for your controller or Windows XP is equipped with a damaged or incompatible driver, you must replace the driver with a valid copy that is compatible with your controller and Windows XP.

  During the first phase of the Windows XP installation, Setup displays the following message is displayed at the bottom of the screen:
  Press F6 if you need to install a third-party RAID or SCSI driver.
  Press F6, and then follow the instructions to install a device driver from your Original Equipment Manufacturer (OEM) mass storage.
  For more information about using F6 to load an OEM device driver to support, click on the number below to view the article in the Microsoft Knowledge Base: 314859 (limited OEM driver support is available with F6 during Windows XP Setup)

  To determine if your hard disk controller is compatible with Windows XP and to obtain information about drivers that are included on the Windows XP CD or available for download, see the last Windows XP compatibility (material) list.
  For more information on the latest Microsoft Windows XP HCL, click on the number below to view the article in the Microsoft Knowledge Base: 314062 (the latest Windows XP hardware compatibility list)

  If your hard disk controller is not listed on the HCL, contact the manufacturer of your computer, System Board, or hard drive controller for more information on the availability of a driver.
  Microsoft does not guarantee that a resolution is available for no HCL HCL. For more information, click on the number below to view the article in the Microsoft Knowledge Base: 315239 (support policy Microsoft for hardware that does not appear in the Windows HCL list)

  If the system in the Windows XP registry hive is corrupted, Windows XP is maybe not able to load the miniport device driver that requires that the controller to start. To resolve this issue, restore a backup of the registry. For more information about restoring a registry backup, click on the number below to view the article in the Microsoft Knowledge Base: 307545 (how to recover from a corrupted registry that prevents Windows XP startup)

  Hardware problems
  You may receive an error message "Stop 0x0000007B" If there is a resource conflict between the boot controller and another controller or between SCSI devices. You can also receive this Stop error message if drive translation is not being performed or if drive translation has been changed. To resolve this problem:
  1. If an IRQ address or i/o port conflict exists between your boot controller and another controller, Windows XP stops responding (hangs) or displays an error message "Stop 0x0000007B" If you have recently added new hardware, remove the new hardware or reconfigure it so that it is not incompatible with any installed controller resources.
  2. If you are using a SCSI drive, check the SCSI chain for correct end. Remove any unused SCSI devices or make sure that each unique SCSI ID.
  3. ensure that this drive translation is turned on (if necessary) and that it has not been changed. For example, if you have recently changed the controller, this problem may occur. For more information about this issue, click on the number below to view the article in the Microsoft Knowledge Base:
  314082 you receive a Stop error 0x0000007b after you move the Windows XP system disk to another computer

  Other questions
  Other possible causes of an error message "Stop 0x0000007B" include:
  The boot volume is corrupted and cannot be initiated by Windows XP. If the file system is corrupted and Windows XP cannot initialize the volume to start during the startup process, move the drive to another computer that is running Windows XP and run the command chkdsk on drive or try to create a parallel installation of Windows XP on the drive (in a separate folder). The Windows XP Setup program checks the integrity of the volume before it copies the files, and it can solve some problems in the process.
  You install Windows XP on a mirrored boot partition that was created by Microsoft Windows NT 4.0. Windows XP does not support the Ftdisk of Windows NT 4.0 volume sets. If you are running Microsoft Windows 2000, you must convert all Ftdisk volume sets to dynamic volumes before you upgrade to Windows XP. If you run Windows NT 4.0, break any mirrors and back up the data on tape, RAID5, or extended volume sets before you upgrade to Windows XP. Games Ftdisk may not be available after the upgrade.

  General troubleshooting
  If none of the issues that have been described in this article apply to you, use the following general troubleshooting steps:

  1. If you receive one of these errors during the installation of Windows XP, update the computer BIOS or obtain Windows XP drivers for your hard drive controller (with the manufacturer of your computer, System Board, or hard disk controller) or do both. For more information about how to update the BIOS of your computer or obtain Windows XP drivers, contact the manufacturer of your computer. For more information about the availability of drivers, see the device driver issues section in this article.

  Note: If Windows NT 4.0 or Windows 2000 has been installed previously on a mirrored boot partition, see the section other issues in this article.

  2. use the known last good Configuration feature. This can solve the problem if you recently installed an incompatible device for your boot controller driver. For more information on using the feature last good known Configuration, click on the number below to view the article in the Microsoft Knowledge Base:
  307852 how to start your computer by using last good known Windows XP Configuration

  3. use the repair option with Windows XP Setup. For more information about repairing Windows XP by using the Setup program, click on the number below to view the article in the Microsoft Knowledge Base: 315341 How to perform an upgrade on place (reinstallation) of Windows XP

  4 restore a backup of the registry. For more information about restoring a registry backup, click on the number below to view the article in the Microsoft Knowledge Base:
  307545 How to recover from a corrupted registry that prevents Windows XP startup.

  Good bye

• Battery Bluetooth Toshiba v Vodafone Remote Access Card

  I have a conflict between the Toshiba Bluetooth stack on my Dell Latitude D410 (Windows XP SP2) installed and My Vodafone Connect Remote Access Card. When I insert the card, I get an error message asking me to verify that the card is inserted. When I uninstall the Bluetooth software, the card works satisfactorily. Disable Bluetooth doesn't have the same effect. Any ideas?

  I assume you are using the USB Toshiba bluetooth adapter

  http://APS.toshiba-tro.de/Bluetooth/redirect.php?page=pages/Toshiba/USB-BT-adapter.html

  Otherwise, the Toshiba Bluetooth stack does not work on your laptop. Follow these steps to make it work.
  Delete Vodafone software and the Toshiba Bluetooth Stack.
  Download the latest battery Bluetooth from the following URL and install it:

  http://APS.toshiba-tro.de/Bluetooth/redirect.php?page=pages/download.php

  Now install the Vodafone card again. Now, it should work.
  Note the order of installation is important as otherwise you will get a COM port conflict

• QMH data dashboard

  Hello

  I did a program using the messages in queue (QMH) Manager based on the continuous measurement and logging example comes with LabVIEW 2013.

  I want to view and control the program using the control panel data with web services (for Ipad). I followed this tutorial;

  https://decibel.NI.com/content/docs/doc-40079

  With the help of this tutorial, I am able to connect my desired and indicators controls on the dashboard of data.

  But when I run the dashboard of data, it does not interact with the program. If however, I have the web resource vi of the program itself if works.

  I made a dummy vi which simply creates a random number and it works fine, using the web services of data dashboard.

  Does anyone know what I am doing wrong?

  Kind regards

  I would try to set up the Web server port for the EXE to a different number; something very far from standard 8080. So make sure you that data dashboard is the port for your EXE and not your project.

  I've never tried defining two Web servers to run on the same port, but I had problems with port conflicts (using the same port for the project and as a result of the EXE) using VI server.