No 17R5720 Dell Wireless with an adapter N2230 connections available

I have an Inspiron 17R5720 with a N2230 adapter using Windows 7 laptop. I bought this new 12/2013 and never had a problem with the wireless (of course just after the expiration of the warranty) so far. My problem is I can not connect to wireless internet, I get the message "no connection is available. My other PC connect wirelessly without problem and my 17R connects with the cable, no problem. I've updated all the software. When I ran check diagnostic Dell he only showed 'Test of 20 failed memory Module', when I checked the driver of N2230 card showed (code 52) and uses no resources because it has a problem. My test failure of memory could be causing my problem N2230. I did a lot of reading online and it seems that the N2230 adapter is not the most reliable equipment and nobody knows what is a code 52?

OK, thanks for your help. I'm tired of piece information problem and gritted my teeth. I made a 'clean' of Windows installation and everything now works great, without errors or problems. Before biting the teeth, I did all the updates both Dell and Windows.

Tags: Dell Products

Similar Questions

  • connection my heartbeat in my Dell XPS with Windows 8.1 connects not through they are paired

    Separated from this thread.

    I have a similar problem connecting my beats of my Dell XPS with Windows 8.1. They are matched with my computer, but it does not connect. Whenever I hit the button to connect, it just eventually times out. I made sure that my headphones are on and through this article to make sure that everything was set up properly, but in vain. They work great with all the phones that I've matched with so far.

    Hello

    Please contact Microsoft Community.

    I would like to know the following information so that we can help you further.

    • What is the model of the computer?

    Please follow the method below and check if it helps:

    Please, try the steps in below link by Nirmal S replied on 12 November 2013.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-hardware/after-upgrading-to-Windows-81-my-Bluetooth-device/bf6c7155-65CB-4874-B683-330e8bfbe9c8

    Also I suggest to install the drivers from the manufacturers website, follow the link below.

    http://www.Dell.com/support/home/us/en/04/product-support/product/XPS-12-l221x/drivers

    For your reference

    http://Windows.Microsoft.com/en-CA/Windows-8/why-isn ' t-windows-conclusion-device

    Hope this information was helpful and let us know if you need more assistance. We will be happy to help.

  • Lost my wireless with a lan cable connected

    I have an old Airport Extreme Base Station. Now I connect a LAN cable to connect the German Entertainment TV.

    The TV works and I continue to receive the signal from the airport but without data internet aka.

    If I disconnect the cable internet wireless lan working again?

    Where is my mistake?

    Dirk best

    Give us a screenshot of the configuration of EI when not working WiFi... and when it fails.

    Please click the airport icon so I can see the analytical parameters.

    Like this.

    What model is your AE?

    You can find the number of A1xxx on the basis or you can hold down the option key and double-click the icon in airport utility.

    The actual model will be displayed on the summary page.

    Then

    This modem do you have? Brand and model please.

    Is what type of broadband services?

  • Still problems with the adapter Bluetooth Toshiba Windows 7

    Hey there, it's me again.

    I am referring to my 'Problem Bluetooth on Windows 7' subject:

    I thought after the solution of bluecat that my problem has been resolved. But it isn't really.

    After you install the Windows fix, it worked just a short time. But now the problem is the same.

    When I remove the Toshiba Bluetooth Stack and try to work with Manager Bluetooth of Windows, I see that the Bluetooth icon is to come and one to go on the taskbar. In Device Manager, I said Windows, that it is not closed the device to save power. But I think that the device is on and walk and stop...

    I really absolutely have no idea what is the problem, but I get terribly angry.

    Details:
    Windows 7
    Dell Wireless Bluetooth internal adapter 350 (but it is manufactured by Toshiba)
    Experienced pilots: Vista Pack of profile of the Dell homepage (no battery installed, driver only) / Toshiba Bluetooth Stack (the latest version)

    This is the old thread:

    Hi all

    Just as I installed Windows 7, my keyboard and Bluetooth mouse do not work very well.

    I use the Dell Wireless 350 Bluetooth internal adapter, Toshiba Bluetooth Stack 8.00.02 and the keyboard and mouse Logitech MX1000.

    To connect the devices on my computer, I first have to disconnect the Bluetooth adapter by pressing Fn + F2 on my Dell i9400, after re-login I can search and connect devices correctly. They work fine as long as the laptop is running.

    After restarting the laptop, devices no longer work. They are still in the known, but not connected Bluetooth stack. That's why I have to unplug the adapter Bluetooth, another time and reconnect in order to connect the two devices.

    I first thought, it's a Windows problem. I thought that Windows is able to ask the adapter to save power. But when I go to Device Manager, there is no box for this option, as known from other devices (Te USB Ports). If this isn't the problem. I think the problem is something else, maybe performed by the Bluetooth stack.

    Windows XP it worked perfectly. I used the same hardware and also the battery Bluetooth Toshiba (uploaded on the homepage of Dell).

    Someone at - it ideas?

    Thank you!

    Daevu

    Hey there

    Yesterday I did Format C: and installed Windows 7 news.

    I do not have a bluetooth driver for my Dell Wireless 350 Bluetooth adapt (made by Toshiba).

    And now: the mouse and the keyboard work. I even do not see anywhere in my system, but they work.

    There is no bluetooth adapter in my device manager and I had do not connect the keyboard and mouse with my computer. She simply do nothing.

    I do not understand this...

    What is a backup connection?

    What I tried:
    -> Installation more recent Bluetooth Stack from Toshiba. Problem in the above message. I also installed the MS Hotfix. The same problem.

    -> Installed "Vista profile Pack" on the home page of Dell, recommended for my laptop and Windows Vista. There is no battery installed. So I had to connect the mouse and keyboard via the Windows Bluetooth Manager. But the adapter was performed on and off windows, the icon in the task bar came and went and came and went. Connection is good, 1 minute then a few seconds. Not possible to work with the mouse.

    And now, without having to install a driver, it works. Am I stupid?

    Daevu

  • Driver to wide band Mobile Dell Wireless 5620 for Windows 8

    I recently bought a WAN card broadband for my Alienware M14x.

    Mini-map 5620 wireless Gobi multi-mode mobile broad band for some Dell systems

    Dell reference: 313-9379

    My laptop runs Windows 8. I can't find a correct driver. Does anyone know if there is a Windows 8 driver for this card

    Thank you

    Anish

    Hi Anish,

    Windows 8 drivers for Dell Wireless 5620 Mobile Broadband is not available and you can try to install the drivers for Windows 7 in compatibility mode. The driver can be downloaded from the following link:
    http://Dell.to/VZICvy

    Please follow the steps below to install the driver in compatibility mode:

    1. right click on the program icon and choose Properties.
    2 when appears in the Properties dialog box, click the Compatibility tab, and then click Run Compatibility convenience store.
    3. in Compatibility Mode section, select run this program in Compatibility Mode for box and select the Windows version of the program you want in the drop-down list.
    4. click OK and then try to run your program again.

  • Adapter Dell Wireless 1515 device not found

    I reinstalled just windows vista 32-bit several times that works fine, but when I try to connect to a wireless network there is no current wireless network. I tried to download the drivers for wireless network and I get the error message not found device adapter Dell Wireless 1515, I checked the card connections without wire inside the computer, they are fine. He has also nothing to do with the wireless router, I also tried to activate the transceiver via F2 aswel as Fn + F2 wireless. IM all that ideas, someone at - it a?

    Hello

    Step 1: Check the device status wireless card on Device Manager and after return the same. Also check the Red or yellow fringe for this device.

    Step 2: You can also try the Fix tool running of the article below and check.

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    Step 3: Update the chipset drivers, for this you may need to contact the PC manufacturer.

  • Problems of internet connectivity with Dell Inspiron 7520 (1703 of Dell Wireless 802.11b/g/n 2.4 ghz)

    Hello

    I bought a Dell Inspiron 7520 for a week now, and I had a strange problem with internet connectivity since then. First, wifi takes a lot of time to connect. After, I'm online, every 10 minutes my network access stops working completely. But if I click on the network icon in the toolbar, it starts working again, but it stops in the next 10 minutes, once again, and so on. If I try to fix connectivity problems, he always find and solve some in the network card or wireless, but then point again, after 10 minutes, or so, it happens again.

    My network card is a Wireless Dell 1703 802.11b/g/n 2.4 ghz and I tried to update and to re - download the firmware, but nothing seems to fix.

    What should I do to fix this?

    Hello friends. Recently I came across the same problem identified by many with a Dell Inspiron 15R laptop 7520 with the Dell Wireless 1703 (Atheros chipset). After losing an entire afternoon and looking at forums and their complaints, I think that I found the solution to the problem (at least, here is running).

    The laptop is connected to a router TP-Link TL-WR740N. The router is configured to run with a frequency of 20 or 40 MHz, making the switch automatically in the factory. The mobile card wireless driver is configured to work only with 20 MHz at the factory. But can be configured to work with two frequencies is adapted automatically. To do this, change the configuration (in Windows 7):

    Start > Control Panel > Device Manager > network adapters > Dell Wireless 1703 802.11b/g/n (2,4 GHz) > click the Advanced tab > select 802.11n bandwidth. Change the value of Auto 20 MHz / 40 MHz.

    Press OK and wait for to reconnect you.

    I hope this helps.

    Jeferson Vasconcellos

  • DELL WIRELESS 1450 WIRELESS USB ADAPT - compatibility issue program and that Dell SingleSource 802.11 WLAN

    Hi, is there anyone out there with the answer?

    Someone has already asked this last year, but no response.

    I've connected with TALK TALK yesterday and had to call technical support, for my wireless connection showed upward. With internet settings has changed, I can obviously connect.

    But because I ca using DELL WIRELESS 1450 WIRELESS USB ADAPTER I had TO re - run drive originally came with the adapter. But I'm now getting a message telling me: there is a known program compatibility issue and that Dell SingleSource 802.11 WLAN is not compatible with this version of Windows (Vista). This question-t - is there a compatible version? No solution is found when I select: find the solution online?

    Thanks, Sarah

    Sarah,

    Try to download and install this, I think this should work for 32 Bit and 64 Bit OS.

    Dell Wireless 1450 (802.11a/b/g) USB2.0 adapt

    Let me know if you have any problems.

  • I have a dell laptop with windows XP I want to use a wireless mouse but cannot figure out how to turn off the pc mouse

    I have a dell laptop with windows xp I want to use a wireless mouse but cannot understand how to turn off the pc mouse

    Thank you for your help, I saved it for future use. My computer it turns out that's very smart after all the fourth test of every thing, I turned it on and the mouse remotely worked, thanks again

  • I can't connect to the network wirelessly with my Dell INSPIRON laptop because I get the automatic Wireless Configuration error, see Article 871122

    I can't connect to the network wirelessly with my Dell INSPIRON laptop because I get the automatic Wireless Configuration error, see Article 871122

    Try this below and see if it help you.

    http://support.Microsoft.com/kb/871122

  • Could someone tell me that I have a laptop that is compatible with the adapter wireless Athreos in it and it catches an unsecured, network shown as next (automatic) for the SSID (network name). Please tell me how to connect...

    Could someone tell me that I have a laptop that is compatible with the adapter wireless Athreos in it and it catches an unsecured, network shown as next (automatic) for the SSID (network name). I tried parameter as point of access, AD-hoc, Connect automatticaly etc but will not connect... Please tell me how to connect...

    Hi Sumit and thanks for posting.

    Your Athreos has never connected? If it has connected then it not only connects it to insecure networks? Also after can trying to connect you do the following?

    Start, run, CMD, OK to open a command prompt:

    Type the following command:

    IPCONFIG/ALL

    [Note that there is no space between the oblique and ALL bar].

    Right click in the command window and choose Select all, and then press ENTER.
    Paste the results in a message here.

    I hope this helps. After the back if you have any questions.

    Shawn - Support Engineer - MCP, MCDST
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • ERROR WITH "DELL WIRELESS WLAN CARD WIRELESS NETWORK CONTROLLER.

    GOT AN ERROR MESSAGE SAYING "DELL WIRELESS WLAN CARD WIRELESS NETWORK CONTROLLER STOPPED WORKING AND WAS CLOSED" AND NEED TO FIX. WHAT SHOULD I DO?

    Hello

    Actually try updating your driver and check with Dell Support and Forums if necessary.

    Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
    version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
    Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    Download - SAVE - go where you put it - right click – RUN AS ADMIN.

    Dell - drivers
    http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

    You can download several at once however restart after the installation of each of them.

    After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
    manufacturer of system become your backup policies).

    Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
    updated drivers.

    I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
    are almost always old, and you can search drivers manually as needed.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    Dell support
    http://support.Dell.com/

    Dell forums
    http://en.community.Dell.com/forums/
    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Problem with wireless B USB adapter unable to connect to wireless G router.

    Hi, I had a LInksys Wireless - B 802 adapter. 11B with a computer Win XP and Win 7 Wireless-G Notebook, both to connect to a Linksys Wireless-G Router WRT54G2.

    The Win 7 Wireless - G Notebook no problem to establish the connection to the router. My 802-11b can detect the network Win XP, but cannot establish a connection witht the router. He always acquires IP and then drop out. I re - install the driver and it still the same.

    Originally, I had the WPA-2 personal habit, the 802. 11 b cannot acquire the same IP but you can see the USSID. After that I switched to WPA-Personal, the 802. 11 b try to acquire intellectual property, but fail to connect.

    Pls help. Thank you very much

    If the model number of B-adapter linksys WUSB11 then WPA security does not work as the WUSB11 support only WEP.

  • My Dell V313w stopped printing/scanning mode wireless or with a direct USB connection after working flawlessly for 2 years

    My Dell V313w stopped printing/scanning mode wireless or with a direct USB connection after working flawlessly for 2 years - any changes made on the network wireless to our knowledge.  Printer works fine in USB mode on old Windows 2000 office.  Network sees the devive asked to detect devices.  Wireless to the printer hardware is perhaps not handshaking...?  Please let know us that he is a very curious pnnc.

    Windows 7 is updated as well as the print driver.  Thank you.

    Hello abir.

    Thank you for giving us the opportunity to help you with your concern for Windows.

    From your post, it seems that you cannot print from Windows 7-based computer.

    When you say "no changes made on the network wireless to our knowledge", which is the type of network you're talking about? (Workgroup, domain)

    It is a difficult problem to diagnose because there are many printers on the market and many reasons why it could not work.

    We will try the steps from the following link and check if this solves the problem.

    Why can I not print?

    http://Windows.Microsoft.com/en-in/Windows7/why-cant-i-print

    You can also check this link:

    http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Response with the State of the question, too, let us know if you need help with Windows problems and we will be happy to help you.

  • I have a Dell Alienware with Vista on it. I use a Logitech wireless mouse. How can I disable the touchpad. I can't find information on it. Thanks, Bart long

    I have a Dell Alienware with Vista on it.  I use a Logitech wireless mouse.  How can I disable the touchpad.  I can't find information on it.  Thanks, Bart long

    I have a Dell Alienware with Vista on it.  I use a Logitech wireless mouse.  How can I disable the touchpad.  I can't find information on it.  Thanks, Bart long

    Hello

    Most Dell systems use the Fn + F3 keyboard shortcut to disable the touchpad. Click on the following link.

    Reference DELL disable or activate the touchpad by using access key: http://support.dell.com/support/topics/global.aspx/support/kcs/document?c=us&docid=424135&doclang=en&l=en&s=gen&cs

    Concerning

Maybe you are looking for

  • When I delete an email in the Inbox, it deletes the following, too.

    When I delete an email in the Inbox, not only it removes this one, but it also removes the following in line. It's really frustrating to have to retrieve messages from the trash all the time. Operating system is Windows 7.

  • Windows (vista) Photo Gallery matter duplicates

    Photo Gallery only import new photos and ignore duplicates of those already on the top of the tower. I just inserted a 1 GB card (I used this card for ages and I know it's ok) and he wants to import all content (more than 800) when I know there are o

  • Connectivity of recorder Panasonic RR-$us450 for Windows 7 64 Bit OS.

    I have Windows 7 Home Edition with a 64-bit operating system.  I have a model of recorder panasonic RR-$us450 and was able to transfer voice files for my old computer with windows xp.  If I understand correctly Panasonic that Windows 7 will only host

  • Breach of access blocking reading 0 x 00000000

    Hello guys ' I am facing a problem. When I was tesing using the Simulator BB 8800 - Vodafone, displayed error popup screen do the following: In fact I don't know why this error occurs and what reason have to do that. I saved 8800 - Vodafone.bug and f

  • Windows 7 xp pro using the log in question

    Windows 7 Pro xp mode will allow me is more access. Now, he asks a user name and password. I have never created one or the other. I tried all combinations of my IDs and passwords nothing helps. Can someone aswsist me?