No device USB Driver problem

Similar Questions

• Apple Mobile Device USB Driver has not passed Logo testing for compatibility with Windows XP, I ran the suggestion to "fix" 925196 that it still does not work. What can I do else?

  Bought the iPhone 3 g (not 4) trying to run the material but get the following error: Apple Mobile Device USB Driver no has not passed Windows Logo testing to verify compatibility with Windows XP continues the installation of this software may impair or destabilize the functioning of your system.

  Windows XP Service Pack 3 is running.

  I ran the 'Fix - It' 925196 solution, but the problem could not be solved. What is a malware problem?

  Hi deanie3,

  We will check if the following is useful.

  Method 1: Run the next Fixit and check the issue.

  Hardware devices do not work or are not detected in Windows

  Method 2: Follow the steps in the below article mentioned to see if it helps.

  You cannot install some programs or updates

• The conclusion for M - Audio MobilePre USB driver problem

  The conclusion for M - Audio MobilePre USB driver problem

  Use: iMac

  OS: El Capitan 1011.2

  The latest driver I could find was 1.8.1.

  Error message:

  Installation failed - Setup could not install the software because there was no

  available software

  I would use this hardware with Final Cut ProX 10.2.2 and Garageband 10.1.0.1

  A quick search seems to indicate the latest version of the driver to be 1.2.1 - there was no 1.8.1 I could find. It has been out for more than a year, so no mention of El Capitan, but it could work. I'll make sure that you have the right to download and try again.

• Windows 7 on my laptop, when I plug my apple Ipod classic to a USB port, I get a message that says: I need an Apple mobile device USB driver

  I have windows 7 on my laptop, when I plug my apple Ipod classic to a USB port, I get a message that says: I need an Apple mobile device USB driver. When windows search the driver it says failure of driver to install, I need something mobile apple USB driver. Can someone tell me where to find this driver. I installed Myapple and Itunes.

  Hello

  I recommend that ask you this question on the following support forums.

  iPod: Apple support communities: https://discussions.apple.com/community/ipod

  The experts, it should be able to help.

  Concerning

• Superdrive Apple USB drive problem

  Situation: The internal superdrive on my MacBook 2009 stop working while I bought a new USB Superdrive.  And only after I plugged it in, has indicated that it is incompatible with my computer.  After reviewing the advice here, I said that most of the optical USB drives on the market are compatible with my computer, so it's something to look at.  However, this year I plan to get a new MacBook, date at which I will need an optical drive that works with newer computers.

  Question: Will be one of the current after the market of optical drives work with the new MacBook? Or should I just keep the Apple Superdrive that I currently have to use?

  Thank you in advance.

  No first hand experience, but I think that number of external optical drives from third party works pretty much any computer that has USB (and much less expensive than the Superdrive).  The only glitch, I know is that application Apple DVD Player can bother but there is a harmless hack that gets around that, or you can use an alternative player such as VLC (I never use DVD player).

  You can browse the web site OWC/mac - ventes.com.  If you know exactly what you want and need no support there are many places to watch it's maybe a dollar or two cheaper but every time that I'm not sure I call them and ask and am happy to spend the little extra to support the customer.

• Re: Play Peek-a-Boo with USB - driver problem

  Hello

  So far, I had no problem with my laptop and windows 7 (32 bit), but there was a problem from the start. my system was not able to detect all the drivers, for the moment, I got 2 unidentified "base system devices.

  At least one of them has got to do something with my USBs, when I connect a plug & play carpet dance for my laptop, it plays basically peek-a-boo with me - recognize something was plugged, but without realizing realize that he is.

  One of my friends even phone sex and BONE, he had no such problems.

  When I try to install the utility driver Support page, suitable for my 'edition', it will stop saying that I have not the common module installed on my system.

  Any help possible? As said, some drivers are missing, which are supposed to make my USB hubs identify devices again, but I know who exactly do not exist, or where to get them.

  Thank you for every little trick

  Great! Thanks for letting us share this last info

• XP SP3: "access denied" to \System32 programs command-line, device USB Installer problem

  Hi all

  I recently had some problems with file/folder permissions after the removal of some trojan virus and now it looks like system & user permissions are scrambled for important system files into \Windows.

  The symptoms are:
  -Windows cannot install any driver of all new storable USB device that I connect to my computer, only the previously used one are recognized and properly displayed in the Explorer. For any I get a message saying that Windows cannot find the driver, even if I manually pick up the correct driver to the correct location, it does not install.
  -I can not throw more my computer-> right button Device Manager, I get a message saying that it cannot be launched, but I always open it manually goes \System32 to reach the file.
  -From the command line, I get an "access denied" to any program of system, I try to use, such as SECEDIT to reset as described in file permissions:http://support.microsoft.com/kb/313222

  If someone knows how to fix these on \Windows file/folder permission issues?

  Thanks for any advice,
  Alex

  Hi Alcor,

  I suggest to follow the instructions in this article to create a new profile to see if the problem exists:

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;326688

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• __Vista and external hard USB drive problems. __

  I have an old USB Maxtor attached an external hard drive with vista home premium.  It was working fine until I left for two weeks.  Now, vista starts up with this drive connected.  When I unplug the USB connection, it starts OK.    Second, but related.  I use this drive to Flash the pictures on the box of the gadget.  Works OK for a bit, then the photos appear more.  I redefine the source folder to make it work again.  The two problems are related to the external hard drive.  Is it vista, usb or drive?

  Any help would be appreciated.

  Vinnie

  Hi Vinnie,

  I suggest you try the following steps to refine the question:

  Step 1: connect the USB device to a different USB port and test it.

  When a device is not functioning, Device Manager also typically displays an error message with an error code that comes with it. First, search for errors in the Manager of devices to do this, follow the steps below:

  Step 2: Disconnect the USB device, then on startup, check for the error code in Device Manager

  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, look for the USB device, and then double-click the device name.
  3. under the gaze of general tab for the status of the device for any error code indicated.

  Get-help-with-Device-Manager-errors
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors

  Step 3: Disconnect the USB device and start, run the fixit provided in the link below at the office level.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Thank you, and in what concerns:
  Ajay K
  Microsoft Answers Support Engineer

  --------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Pavilion dv6 - 6123cl: HP Pavilion dv6 - 6123cl - USB driver problems

  Hi all

  I tried to find a way to solve the problem I encounter without success, so I decided to join this community and hope that someone else came across something similar and has been able to solve.

  I have two identical HP notebook computers (HP Pavilion dv6 - 6123cl) and both of these computers have exactly the same problem. After you have reinstalled Windows 7 for some reason any USB ports on the left side of the laptop are not recognized by Windows, leaving me with only 2 USB ports available. I downloaded and installed all the official drivers from the HP site but the problem remains still. Device Manager will not find the drivers and it drives me crazy because all the USB ports on both computers worked very well so far. What am I supposed to do?

  Any help or suggestion is highly appreciated.

  You are the very welcome.

  Download and install both of these drivers and restart.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5098226&swItemId=ob_118744_1&swEnvOid=4058

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5098226&swItemId=ob_123787_1&swEnvOid=4058

  Do you need the SMBus Controller driver too?

  If so, see if it works...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=cp_127691_1

• USB drive problem external 250 GB - entered INI

  Hi all, I would appreciate your help if possible here. I have a shiny new Vista powered laptop and I am trying to copy my files from my XP powered Desktop via an external 250 GB drive. When I put the password in when I put the five USB into the laptop I get the following message: "entered INI in the path F:\ONSPCCDH. INI do not match data from the survey. Make sure that the INI file has the correct entry.

  When I look for this file, it is not here - someone has any ideas?

  THX,

  J

  Hello

  Maybe this thread can help http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=20901

  Check it out!

• Series USB driver problem

  I have a Dell laptop running windows 7 pro and an external piece of hardware and cable that requires a USB to serial, Spplied by making driver to be installed. The pilot is right for w7, but when it is installed there is no connection to any com port, all external equipment works correctly with the driver and the program on a machine of friends also running W7. Is there some file or program that I'm missing? I tried changing usb ports and reinstalled the driver without success. Also, I can't find any reference to com ports on my computer.
  Help

  HS38

  (Former) Will drivers need to be installed in compatibility mode.

  To run in compatibility mode do the following:

  Click with the right button on the installer > properties > compatibility > choose OS

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows?SignedIn=1

• Apple iPhone 4S for windows 8.1 usb driver

  Apple iPhone 4S no usb driver for windows 8.1

  Hello syap_pop,

  It seems that you have the driver installed on Windows 8.1 for iOS devices. Use this section of the following article:

  If iTunes does not recognize your iPhone, iPad, or iPod

  You do not see the Apple Mobile Device USB Driver

  1. Disconnect your device from your computer.
  2. Save a screenshot by pressing the Home button and sleep/wake button of the device button at the same time. The screen should Flash briefly.
  3. Reconnect your device to your computer.
  4. If you see one of these sections in the Device Manager, expand them:
     • Imaging devices
     • Other devices
     • Portable devices
     • USB Bus controllers

  Now, locate the entry that recognizes the device as a camera. You should see 'Apple IPhone', 'Apple iPad' or 'Apple iPod '. Right-click the device entry, and then manually update the Apple Mobile Device USB driver.

  If a single unknown device appears, follow these steps:

  1. Right click on the unknown device entry.
  2. Choose Properties from the context menu, and then click the Details tab.
  3. In the drop-down menu, select hardware IDS.
  4. If the ID begins with something other than USB\VID_0000 & PID_0000, go into the Device Manager and right click on the entry for device unknown, and then manually update the Apple Mobile Device USB driver.
  5. If the ID begins with USB\VID_0000 & PID_0000, then follow the remaining steps.
  6. Unplug the unit and remove all the USB devices on the computer.
  7. Shut down the computer, and then turn it back on.
  8. Reconnect the device, tests of each USB port for about 30 seconds to see if the device is recognized.
  9. Test with a different, checked 30-pins-USB or the lightning-connector-cable-USB, if they are available.

  If you still need help, contact Apple technical support.

  Thank you for using communities of Apple Support.

• Attempt to connect Smart Rugby at DoubleTwist, USB device driver problem

  Original title - mobile phone android

  Try to connect my Smart Rugby to DoubleTwist. USB MTP device has a driver problem. What can I do?

  Hello

  Check with the manufacturer of phone or your support telephone company if they were provided with the phone.

  Rob - SpiritX

• Peripheral Audio USB-Mulit-channel has a driver problem and PnP device problem.

  I try to use the blue ice pre - amp for recording. Under channel-Mulit-USB Audio Device, device status, it displays "this device cannot start. (Code 10) "once I start the troubleshooting process it shows that even after reinstalling the driver it still does not work and that there is a problem with the device PnP I already tried to uninstall the driver and restart my laptop to let windows try again but nothing works.  Please help D:! Thank you all very much! :]
  -Kyle

  Hello

  1. is this problem limited with a specific USB device?

  2. it worked before?

  3. using this unit for the first time on this computer?

  4. the other USB devices work properly?

  Method 1: Run the troubleshooter and see if it helps.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues. You may need to update the chipset drivers and the USB controller

  Follow the given article below for more information.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  In addition, update the driver from the manufacturer's Web site and see if it helps.

  Method 3: Uninstall and reinstall the USB drivers and check if the problem persists

  1 disconnect all USB devices except the USB keyboard and mouse.

  2. click on start and type device manager in the start search box and press ENTER.
  3. Select the Device Manager and a pop-up window will Device Manager.
  4. click the + on controllers USB Bus to develop it.
  5. right click on all controllers USB and USB Root Hub that is listed, and select uninstall.
  6. restart the computer.
  7. plug in the appliance and check if it works.
   
   
   
   
  I hope this helps.

• Video device USB has a driver problem__ __There is a problem with the driver for USB video Device.__Device information __Name: __ID USB video device: USB\VID_05CA & PID_180C & MI_00\6 & 69C3BD0 & 0 & 0000 code __Error: 10 _ _ _

  I hava a dell inspiron 1440 with windows 7 and a a few days ago, my webcam was working just fine but know that it gives me this after troubleshooting

  Has a USB video device driver problem

  Not fixed

  There is a problem with the driver for USB video device. The driver must be reinstalled.

  The device information

  Name: USB video device ID: USB\VID_05CA & PID_180C & MI_00\6 & 69C3BD0 & 0 & 0000 Error code: 10

  Hey laloo.16,

  As the error message states clearly that reinstalling the driver is required, please do the same. You can uninstall the driver that is currently installed from the Device Manager.
  To access Device Manager:
  1. go to start and type Device Manager.
  2. Select Device Manager in the control panel list.
  3. go to your device.
  4. to remove:
  Right-click on it and select Properties.
  5. Select the driver tab and click on uninstall to uninstall the existing driver.
  6. close Device Manager.
  Now go to the link below. Download the Dell WebCam software for your product.

  http://support.Dell.com/support/downloads/DriversList.aspx?OS=W732&CATID=-1&DateID=-1&impid=-1&OSL=en&typeid=-1&FormatID=-1&SERVICETAG=&SystemID=INSPIRON1440&hidos=WLH&hidlang=en&TabIndex =

  Please choose the appropriate version of Windows 7.  Install the driver and see if that brings your webcam to work.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.