no service in administrative tools Printer Spooler

Similar Questions

• Why is my computer is giving me an error message that says: "cannot start service on Local computer print spooler?

  Why is my computer is giving me an error message that says: "cannot start service on Local computer print spooler?

  When I tried to install my printer, I got an error 1068: the dependency service or group could start. I tried to go into my computer management to enable the print spooler service, but it gave me the same error message each time. What is the dependency service or group and how I put in place?

  Hi SimoneJ,

  Try to replace spoolsv.exe is located in C:\windows\system32 in C:\WINDOWS\ServicePackFiles\i386.

  Starting from printer spooler services (start-> Run-> services.msc-> printer spooler).

  I hope this helps.

• "Windows failed to start the service on Local computer print spooler. Error 1068: the dependency service or group could start. »

  I fiddle with my startup programs and now I have this error message: "Windows could not start service on Local computer print spooler.  Error 1068: the dependency service or group could start. "There is no printer listed everywhere and nothing works.

  Hi Jkoryzna,

  Thank you for choosing the Microsoft Answers forum.

  To solve the problem, fix the dependency for the spooler service information.

  Click Start, run and type the following text:

  CMD /K SC CONFIG SPOOLER DEPEND = RPCSS

  Alternatively, to achieve this by using the Registry Editor:

  Click Start, run and type Regedit.exe

  Navigate to the following branch

  HKEY_LOCAL_MACHINE-SYSTEM-CurrentControlSet-Services-spooler

  In the right pane, double-click the DependOnService value

  Delete existing data and then type RPCSS

  Close Regedit.exe.

  
  REGISTRY WARNING

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Navigate through the steps mentioned in the article below.
  Solve printing problems by resetting the print spooler.

  http://support.Microsoft.com/kb/2000007

  Let us know if this helps

  Concerning
  Anthony.

• From a service under administrative tools

  I have an iphone and when I plug it into my laptop it charges it and my itunes says that it cannot connect to my phone because the device is not started, but when I try to start it in services under administrative tools, he told me he started and then stopped automatically. How can I get to let me firstly the device?

  Hi Jordybug,

  You can try the procedure described at the Apple support link and check if it helps:

  http://support.Apple.com/kb/TS1567

  Hope this information is useful.

  Boumediene. K.
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot start service on local computer print spooler. Error 2 the system could not find the file specified. Please need file spoolsv.exe

  Ould does not start on local print spooler service. Error 2 the system could not find the file specified. Please need file spoolsv.exe

  Hello

  I suggest you try to launch the fixit of this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  It will be useful.

• "Window cannot start service on Local computer print spooler. Error 1053: the service is not responding to demand launch or timely control. »

  I was going to print something my Professor downloaded on the school Web site, but after I click Enable editing button, the printer could not print. I mean, I could not find my printer. He went, and when I try to add a printer, it gave me an error message. I tried troubleshooting of the printer, and I got was that the print spooler was not working. I used office.com and tried to restart the print spooler in the services.msc, and he gave me this: "window on computer Local Print Spooler service cannot be started. Error 1053: the service is not responding to demand launch or timely control. "Help, please!

  Hello

  I suggest you try the steps from the following link:

  Spooler printer Forum FAQ:A error was received while trying to use printer
  http://social.technet.Microsoft.com/forums/en-us/w7itprohardware/thread/2b618d54-854A-4CFD-84F5-f069aad75a9f/

  Method 2
  I suggest you try the steps from the following link:

  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

• Windows could not start the service on Local computer print spooler. Error 1053: The service did not demand launch or timely control.

  My printer was working fine and then today I received this message. Tried to strat as the spooler services but is unresponsive to start and I can stop him either. Heeeelp.

  Hi Slobodan,

  Thank you for posting.

  1 is connected to the domain of the computer?

  Please see the link.

  FIX: You receive an "error 1053: the service has failed to demand launch or control in a timely" error message when you stop or pause a managed Windows service

  http://support.Microsoft.com/kb/839174

• Not in the print spooler service

  Trying to install wireless printer, but cannot load disk from HP software because "Spooler not to the print service. Had problems of virus recently and suspect damaged printer driver. Where am I going to restore the print spooler service?

  Click on the Start button and select Control Panel, administrative tools, Services. Locate the print spooler service in the list and make sure that the startup type is automatic. If it is not set to automatic, right-click and select Properties, general tab. There is a box after the startup type. The options are available in a menu drop-down by clicking on the down arrow to the right of the box. After the change is made click apply and then click OK. Restart the computer and verify if it has started. Hope this helps, Gerry Cornell

• Print Spooler error 1068: the dependency service or group could start. __

  I tried - unsuccessfully - restart the print spooler on a box of XP with SP3.  I read the previous posts for this error and this box refuses to restart the service.

  Is there an easy way to fix this without reverting to a system reset?  Can I run a repair?  If so, it will fix the problem?  I tried to run a restore of the system to a previous date and who could not do anything for me either.

  When you attempt to start the Print Spooler Service, error 1068 means "the dependency service does not exist. the dependency service or group was able to start. »

  Depending on your environment and your type of printer installed, your Print Spooler Service will have other dependent services that must run before the Print Spooler Service starts.  If the dependent services do not work, you will see an error 1068 or a similar message on the dependent services when you try to start the Print Spooler Service.

  Some Lexmark printers add their own XP services and start the Print Spooler Service, lists them as dependencies and that is why these Lexmark Services must run before the print service spooler will begin.  It may be listed as the LexBce Server.

  You now or have you ever have all installed Lexmark printers?  If Yes, do you still use Lexmark printers?

  Depending on your printing environment, if you use another type of printer, you can have other Service listed tab in the Print Spooler Service dependencies.

  Use the Applet of Services XP to check the dependencies of print spooler and options.

  Click Start, run and enter in the box:

  services.msc

  Click OK to open the Services Applet.

  Locate the Print Spooler Service, right-click, choose Properties, and then look at the Dependencies tab.  Services listed there must run before the Print Spooler Service starts.  If they don't, you'll get an error 1068 or a similar message on the dependent services when you try to start the Print Spooler Service.

  You should always see the service remote procedure call (RPC) and maybe a few others depending on the type of printer that you have installed (Lexmark printers can add some dependency Services to your configuration of XP).  All dependent services must run before the Print Spooler Service starts.

  Dependent Services may vary according to the type of printer that you have installed.

  The RPC service is also required for many other things to work properly and is usually still running and the autostart value.

  If the RPC Service does not work and does not start automatically, you can have other problems, but start with the easy stuff first.

  Of the Services Applet, find the service remote procedure call (RPC) and if it does not, right-click and start it and set it to automatic.

  Then find and all the other print spooler dependency services listed in the Print Spooler Service Dependencies tab.  They will be lance automatically the next time you reboot your system (if that is your desire), set the startup type for these Services to automatic.

  When everything works as you want, restart and check your Services again to be sure that they start correctly and solve any addition
  questions.

  If the remote procedure call (RPC) service is not listed as a dependency for your Print Spooler Service, you must inform XP that the print spooler service depends on the RPC service.

  Click Start, run, and in the box type (including important space after the "equal" sign):

  dependent on the spooler of sc config = RPCSS

  Click OK to assign the RPC service for the print spooler service, and then make sure that the RPC Service is running and start your Print Spooler Service.

  If you still can not understand it, react with the items that you see the tab of the Print Spooler Service dependencies.

  Don't forget to restart and check that everything works correctly after each adjustment.

  Please note that using the above command will effectively remove all the current (and perhaps old) Print Spooler dependency assigned for the Print Spooler Service and assign it only dependent on the RPC Service.  It would be 'normal '.

  The dependence of CPP Service would be typical of most facilities, or after you have uninstalled all the time some printers (Lexmark), but your printer may have a few other dependencies.  If it still does not respond, we'll fix it!

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Operation could not be performed. The print spooler service is not running

  I get the error message "operation could not be performed. The print spooler service is not running. "How to start the service on Windows xp print spooler?

  Click Start--->run---> Type ' services.msc"--->OK and scroll down to print spooler entry and right-click, select Properties, set Startup type and in"service status", click the button to start the service."

  Good luck.

• Failed to load printer - clicking Add indicates a Printer Spooler Service does not.

  Upgrade Windows XP to SP3 last night.  Now all in printers and faxes has disappeared.  Click on add a printer indicates the Spooler Service does not.   Went in and forced a start; Add the said printer still does not.

  Deleted old printer drivers (Lexmark).  Downloaded updated.  Execution of Lexmark is set up; said the spooler does not (yet), tries to start.  Then, the installation fails saying "No. valid Ports for the driver.

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  I think that your problem is related to the way that Lexmark install printers, as explained in this excerpt from the article linked in step B below (step numbers refer to article in full):

  If you have a Lexmark printer, these additional steps may be necessary (thanks to Robert Orleth [MSFT] to provide this information).  Sometimes, the Lexmark printer installation process installs a service that makes dependent Print Spooler service itself.  If there is a problem with service Lexmark or a Lexmark printer driver (or you have removed using the procedure above), Print Spooler service does not start (see also http://support.microsoft.com/default.aspx?scid=kb;en-us;324757).  The steps below make Print Spooler service only on service (RPCSS) remote procedure (RPC) call, which is normal.  Print Spooler service dependencies are stored in the registry at

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spooler\DependOnService

  The sc config step 16 command resets the value for this entry.

  1. Open a command prompt window

  2. the control key
            sc config spooler depend = RPCSS
        (Note the space after the = not before)

  3. Restart print spooler (see steps 8 and 9 above)

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• PRINT SPOOLER service does not START, ERROR: 1058 - Service cannot be started.

  OS = XP SP3

  Laptop = Dell D500

  As directed by Microsoft and Dell knowledge base, I deleted the printer spools and pilot; and edited my registry, remove the drivers and monitors printing.  I also followed a process dictated by the KB919750, nothing helped.

  I am unable to add printers, because of this problem.

  I keep getting the same error messages...

  "Cannot start service on Local computer print spooler.

  "ERROR 1058: cannot start Service.

  OS = XP SP3

  Laptop = Dell D500

  As directed by Microsoft and Dell knowledge base, I deleted the printer spools and pilot; and edited my registry, remove the drivers and monitors printing.  I also followed a process dictated by the KB919750, nothing helped.

  I am unable to add printers, because of this problem.

  I keep getting the same error messages...

  "Cannot start service on Local computer print spooler.

  "ERROR 1058: cannot start Service.

  PML: thank you.  Your suggestion to confirm that the device was also PERMITTED did the trick!  I can now and have ADDED a printer.  Thanks again!

• Not able to start the print spooler service

  Cannot start service on Local computer print spooler. Error 1075: The dependency service does not exist or has been marked for deletion.

  OK... so how to fix this?

  I followed the instructions on how to start the print spooler and then got code error or message above... I hope someone else has had experience with this and can tell me what to do about it... I am running windows xp home service pack 3

  Hello

  Will you please download and run doctor impression scanning HP and it will help you solve the problem.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=IM-135116-1&cc=us&DLC=en&LC=en&OS=228&product=3965849&sw_lang=

  Hope this helps

• Error message "Windows can't open add printer." The local print spooler service is not running. Please restat the spooler or restart the machine. "while trying to add printers in Windows 7

  Original title: my laptop has lost all printers and windows & no longer recognizes them. Help! I can't print anything

  I use my laptop computer in a docking station.  I took it out to take for a trip and when I got home I plugged it back (as I always do).  Just before the trip, I have upgraded to Windows 7 and all my printers were working very well.  When I got home and pluged again, Windows does not recognize one of my printers.  When I try to add printers a say8ing error message "Windows can't open add printer."  The local print spooler service is not running.  Please restat the spooler or restart the machine. "I tried to restart and turn off the printer, etc.  Can someone help me?

  Hi RobynGP,
   
  This may occur if the print spooler requires other services, and these services are not running. To resolve this issue, follow these steps:
   
  1. in Services, right-click on print spooler and then click Properties.
  
  2. click the Dependencies tab. The first box list all system services that must work for the print spooler start. These are dependencies.
  
  3 make a note of each service, click OK, and restart each service on which the print spooler is dependent, if the service is not already started. If a service is not started, right-click, click Properties, and then make sure that the startup type is automatic.
   
  Let us know if this helped.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Local print spooler service does not not (Windows 7)

  We bought a new HP PC with Windows 7 in December and the printer worked very well.   Suddenly, he stopped and we get an error Print Spooler Service not working.   I ran troubleshooting, and he said he fixed it, but we try and print to get the error again.

  We thought that we were lucky that our old PC made through the years of Vista and WIndows 7 would be better, but I was wondering if it is still too recent.

  How fix us this so that it remains fixed?

  ETA - PC is an HP, but the printer is a Dell.   Is - this problem is occurring more with certain products?  The printer is of 5 years so not opposed to replace if it will solve the problem but want one that works with Windows 7.

  Can you check it out here:

  Start > type services.msc in the search programs and files, then press 'Enter' > then in the right window, scroll down to the print spooler service, and then double click on "Print spooler" > dependencies

  What is listed under "this service depends on the following system components?

  Then click on the tab "General".

  What is the 'print spooler startup type"set to"automatic "?

  Is the "Service status" of the print spooler "started"?

  If this is not the case, can you "start" the print spooler service?

  BTW, what Dell printer is installed?