No signal to monitor - HP Pavilion t550.uk

Similar Questions

• My office does not send signal to monitor

  HP Pavilion a6200t and Desktop HP vp17 monitor

  My office does not send signal to monitor. I use the monitor to another computer it works fine.

  Problem 3 months ago.
  I clean the inside of the desktop with the compressed air bottle.

  Very important, I clean the contacts of the RAM with a cloth of cotton soaked in 95% alcohol.

• HP Pavilion DPGEK44 Gaming: HP Pavilion Gaming DPGEK44 connected via the monitor HP Pavilion 24xw - no sound

  The sound on my laptop works fine until I connect it via HDMI to a monitor HP Pavilion 24xw.  Then the sound disappears.  If I disconnect it, the sound comes back.

  I tried to go to the 'Sound' of the control panel section.  There are two options:

  Realtek High Definition Audio speakers

  HP 24xw

  The default value is Realtek speakers.  When I use the test installation my laptop plays the sound test.  I've updated to the latest version of the driver.

  If anyone can help with why where the monitor audio disappears from my laptop?

  Thank you very much!

  Hi @Cat999,

  Welcome to the HP Forums!

  I understand that you have problems with your HP Pavilion Notebook DPGEK44 game, when you connect the HDMI cable to a HP Pavilion 24xw monitor. I'm happy to help you!

  Please try the steps in this guide, Troubleshooting HDMI screen and sound Issues.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this helps!

• Types of POWER connectors required on HP Pavilion t550.uk

  I need to replace the power supply of my HP Pavilion t550.uk to accommodate a new graphics that require 300 Watts. The PSU existing according to me is a BESTEC ATX-250-12Z REC: C.

  Open the machine up there seem to be 5 existing connections:

  (1) CD and DVD - these two players have a rectangular connector with sections of 4 x 1 and 8 wires

  (2) hard - this is very similar to the above but maybe a bit bigger in size.

  (3) motherboard - a large rectangular connector with sections of 10 x 2. Many sons.

  (4) motherboard - a connector 2 x 2 with 4 wire square.

  The new graphics card also requires a 4 pin connection.

  The existing power supply dimensions are 6 inches x 5 1/2 in. x 3 1/2 inches.

  I was considering an Antec E380 or something similar, but I am concerned about the type of connectors that I need. I think that the existing motherboard connectors are compatible with most modern power supplies, but I'm not sure about the others.

  Other http://www.itwinkle.com/be25posuba.html , which is not the same exact model, I can't find any online form describing the connectors on the Bestec. Here, they are described as 4 x PATA.

  -L'Antec has 6 x Molex (4 x SATA, which look completely different from me). http://www.Antec.com/connectors.php?ProdID=04639

  -The Cosair 430CX has 3 x 4 Pin peripheral connectors (4 x SATA).

  Are these Molex or 4 peripheral connectors that I need or do I have to seek alternatives or adapters might be?

  Would appreciate some advice.

  Thank you

  Yes, it's a 4 pin Molex. The same as that used to power the old hard disks IDE/PATA.

• 22fi HP PAVILION monitor: monitor HP PAVILION 22fi

  Hello

  I have a problem with my monitor HP PAVILION 22fi, the display of the monitor changed showing green on the left side with horizontal lines, I cheked it change for vga displays card guard if there is a problem with my graphics card, I found that this graphics card has no problem at all... I believe that the monitor has some display problems, help me to find a solution, but still its guarantee on.

  Product nameAVILION 22fi in monitors

  Serial number: 3CM30203ZF

  Product number: C8H77A7

  Thanks in advance,

  Rafiq.

  Hi Dean associate.

  I've done all these things, but it won ' t work, Nevermind he slipped by fluctuation of power... now its works well

  Congratulations,

  My greetings to you for Alain...

  Kind regards

  Ali

• Loses the signal of monitor

  System:

  CPU: AMD Athlon X 64 Dual Core 2.6 GHz

  Motherboard: ASUSTeK M2N - MX SE Plus

  RAM: 2048 gigabytes

  Graphics card: MSI 7300 initially, then a PNY Geforce GT 520

  Storage: A WD 200 and a WD 500

  DVD: A (unknown model)

  Monitor: LG W2242T

  OS: Windows 7 Home Premium

  Stats:

  04/12/2012, I bought a copy of Windows 8 Pro for my personal system (not above).

  07/12/2012, I bought a 2nd copy of Win 8 Pro for, the above family system.

  12/7, I started to install Windows 8 Pro system above with the MSI 7300. The facility would go to which appeared at the end, but towards the end, he would show graphics on a blue background. Then he would show no signal on the screen, and the lock, I turn off and then restart. Once restarted, I constantly had the installation message failure and loaded windows 7. After several test all resulting in the same situation, I bought the PNY 520 thinking the MSI 7300 GT was the problem. Unfortunately come with the same lock upward and scrambled graphics. I have tried 15 to 20 facilities work my bios, all to nothing does not. Then, in desperation I downloaded the Win 8 Customer Preview and tried and it INSTALLED and RAN PERFECTLY.

  I'm afraid to try the 8 Win pro on my personal system until I get the functioning of the family system and understand what is happening. Any help is greatly appreciated, thanks for posting and email* address email is removed from the privacy *.  I'll give you my cell phone number if you ask in the interest of understanding and solving this frustrating problem.

  Hi glenblaha,

  You can see these links and control which should certainly help u.

  http://www.TechRepublic.com/forum/questions/101-302418/monitor-keeps-losing-signal

  http://www.TomsHardware.com/Forum/115113-13-monitor-losing-signal-playing

  http://www.TechRepublic.com/forum/questions/101-300412/loss-of-signal-to-monitor-but-PC-still-running

  All the best!

• no signal with monitor Acer AL 2216

  I used this monitor acer with 32-bit xp system and upgraded to windows 7 64 bit system. On initial connection everything has worked so I had to get the data on the old computer and hung up and the monitor has then didn't show no signal.  Then I got the old computer with XP and rehooked the new computer windows 7 and it displays no signal as well. Please tell us how I can return signal to monitor, and if it is advisabe to swap computers so I'm having this problem.  I still need to use the former with the data that is on it.

  Most monitors have analog modes and a DVI/digital input at the back of the LCD screen. Try to use the other entry.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Pavilion 500: 6 beeps continuous motherboard when GTX 460 is installed and computer, no signal to monitor

  I recently got a gtx 460 s decision-making and wanted to put it in my computer, I have a different diet that is 700 watts and the two connectors 6-pin at the back of the computer, the card is also sitting (re-sitting several times - not the question) I also I added more than 8 gigabytes of ram to the motherboard, I tried to remove it and start the computer , but it still sounds. Also, I can't access the bios because the monitor receives no signal.

  the question I want to know is, have all the required connectors? because it seems that there is an another slot of tiny psi on the top of the card and also if my motherboard only supports the card.

  Thank you

  Hello:

  If your PC comes with Windows 8, 8.1, or 10 of the plant, you need to change two parameters of the BIOS before installing a video card no HP.

  Please see this link for which parameters to change.

  http://support.HP.com/us-en/document/c03653200/

• Pavilion slimline light turns on but no signal on monitor

  the monitor is of course, but he says no signal when I turn on my pc. The hard drive does not work I think that as long as the light orange not flash or what I mean running. Only the fan runs. On the keyboard flashes only at the point when I push the power button. I use the monitor on the other pc and it works very well. I can eject the DVD tho player, while the indicator light is on. What is the problem, please help!

  I tried the steps. Reset the bios. The light of the keyboard are not after I pressed the power button which would indicate that these components are not running. only 1 blink. I tried all the steps and still no display.

• Don't boot to desktop-Boot computer ups always come with "no input signal" for monitor

  Thanks for the research on this issue.  So first of all, he could start after a few attempts in the end goes to the blue screen error at approx. 5 min. I started this path several times that in "safe mode with network" to try the many suggestions of repair for two days. " At this point, it's freezing just at "windows is loading files", but probably will go to blue screen error. Boot ups always come with "no input signal" for the monitor and signal switching in the Help menu for 5 min periods I've mentioned and then fails or "monitor going to sleep" occurs.

  The error messages rec'vd: corrupted image, corrupted file and header file check sum does not match the sum of computer control. The recommendations of the screen blue: disable the BIOS memory, any material current or drivers and check disk space.

  Some tent to fix: memory diagnostics and it showed 'no problem', checked monitor on another computer and it works, in a session of 5 min a download to 'fix' Microsoft via a USB problem like "search of windows crashes" but was 'unable to set', a few other attempts would show the "windows installer has stopped working" preventing any action.

  At the present time, am unable to start even with advanced at F8 options.  It's HP Pavilion 10/2007, with the help of HP. Its on a wireless network with a netbook, Blu - ray, occasionally a cell phone that works on windows live but none presents as a device.

  Hello

  ·        You did changes to the computer before the show?

  ·        What is the exact error message that you receive?

  Method 1: Remove the external devices except the keyboard and mouse and try to restart the computer in safe mode and check if you can start inside.

  If you are able to boot into safe mode then try a restore of the system it and check if it helps solve the problem:

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Method 2: I suggest you do a system recovery options system restore and see if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 3: If the system restore does not help then do a startup repair and check if this solves the problem.

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

• HP Pavilion 25xw: new monitor - Hp Pavilion 25xw

  Hello

  You just bought a new HP Envy 750-129cb here in the Canada, and it is great... but one thing:

  It came with a HP Pavilion 25xw - Moniotor

  (1) I do not think, but is the touchscreen monitor? It is not currently, but maybe I'm missing something?

  (2) it doesn't seem to be any built-in internal speakers - is this correct?

  Thank you very much.

  It does not have built-in speakers. You're not missing something, this isn't a touchscreen

  The specifications as follows

  http://store.HP.com/us/en/PDP/HP-Pavilion-25xw-25-inch-IPS-led-backlit-monitor

• How to set the resolution of the Viewsonic VX2235wm monitor with Pavilion a420n desktop computer?

  1 HP Pavilion A420N

  2 Win XP

  3 Control Panel-> display, does not have the optimal screen resolution, 1680 x 1050 at 60 Hz. The selections available only for a lower resolution without the proportions appropriate for this monitor and the screen image is severely distorted.

  4. installed latest version of the BIOS, video drivers, drivers latest installed monitor, the monitor is a Viewsonic VX2235WM

  Can someone help me out?

  Thank you

  Here are the specifications of your HP a420n desktop and its card mother A7V8X - LA Kamet2-GL6E. The edge VIA Unichrome graphics adapter is old and does not support the extensions on the big screen. 800 x 600, 1024 x 768 and 1280 x 1024 resolutions are more likely that will support the computer, which are all the 4:3 aspect ratios. Based on the above specifications, I would say that after buying and installing a AGP 8 X / 4 X (1.5V) graphics card, your system must manage a 16:10 ratio width / Monitor wide screen without problem.

  Frank

• w2207h monitor and Pavilion dv6t

  I have a new Pavilion dv6t Select laptop running WIndows 7 64 bit directly connected to a monitor in w2207h 22. It does not preserve the configuration of display resolution when I power it back up again.  Before he turned off had a resolution of 1680 x 1050 configuration, small icons, and other parameters, the first two being those that I am more interested in maintaining.

  I used to have a laptop no HP on a docking station connected to this same screen, the old laptop had no problem to recognize the resolution that I put up on the screen.  In fact, all I had to do was power up and presto.

  My new dv6t does not keep the display setting unless I do the following:

  (1) I opened the lid of the laptop and start it (if it is extended or not standby mode)

  (2) when he us operational, the monitor looks different (large icons, fuzzy fonts, lower resolution).

  (3) I use the F4 key to tell him that I have duplicate monitors.

  (4) the monitor then displays the appropriate resolution.

  If I don't tell her to do with the F4 monitor rest at the wrong resolution (for example (for the larger icons, fuzzy fonts, a lower resolution).

  I'm annnoyed enough I need to power my laptop by opening the cover when it is connected to the monitor, but now I have to do the extra step of the F4 to get the external screen is displayed correctly.

  Any ideas as to why the monitor does not display the appropriate resolution when I turn?

  Thank you!

  Yes.  It's good information. Thank you.

  Try using the latest version of the ATI video driver.  Don't forget to create a system restore point before updating the pilot arrived that something goes wrong.

  Look at the bottom of the laptop.  Do you see a sticky HP label with the model number?

• HDMI / DisplayPort gives no signal on monitor

  Hi, I recently bought an Xbox 360 and I am trying to connect it to my monitor. Everything works fine when I use the HDMI cable to the tv, but not luck, when you use HDMI / DisplayPort on my monitor. I tried to change the source by default to DisplayPort and all I can think, without success. Only thing I get is 'No Signal'

  I have a HP Compaq LA2306x monitor.

  Hello

  Don't forget to use the video output 1080 p for the Xbox.  This resolution may not be possible on some models and specific content, then you might need to go back to 720 p.

  You might want to try a HDMI cable to DVI or use an HDMI to DVI adapter instead of display port.

  Have you tried the Xbox forum for suggestions when your subject?

  If you decide to stick with a display port connection then you might need an active or passive DP to HDMI dongle. I can't say what dongle may or may not work with your particular connection configuration.

• Connect the second VGA monitor to Pavilion HPE

  Hello

  I have a Pavilion HPE h8-1114 PC, that has a DVI and HDMI monitor port. I have a VGA monitor connected to the DVI port with an adapter. I have a second VGA monitor, I want to connect, but I understand that it cannot be connected to the HDMI port. Are there other options besides buying a HDMI monitor? Can I use one of the covered ports which I think is VGA? (I guess not.) Can I add a second graphics card with a VGA port and use both screens? (I saw on another post that adding another graphics card could disable the existing card). Can I opt for a card that supports two VGA or DVI ports?

  Thank you!

  In addition what erico said, there are other options. You can use a video-to-USB adapter of EVGA UV plus + 19 or you can add a x 1 PCIe graphics card. If with a PCIe x 1, using a card Nvidia... results will be the best in this way.

  Frank