No video no audio my cpu fan is on my tower that FAM is in the light of the motherboard is on.

Similar Questions

• Inspiron N7110 - video freezes / audio stutters / CPU use spikes

  Hello

  Recently, I'm having a problem watching videos (on my laptop and internet). The problem is that the video freezes for a second, while the audio stutters. What I also noticed is that with this problem, the resource monitor displays this: http://img834.imageshack.us/img834/7656/freezingr.jpg .

  When he first started I thought it was a cooling problem, because my CPU cooling fan had become very noisy. Well, I changed the fan and the continuous problem bothers me. I did a few other things to try to solve this problem: uninstalled and reinstalled the Intel HD Graphics driver, ran chkdsk - both does not solve the problem. I ran a full diagnosis of Dell in http://www.dell.com/support/Diagnostics/us/en/19/ , but he did not take questions. I googled the problem, but I was not able to find a solution. I'd appreciate any help. My laptop is that 8 months.

  Hi Rolland666,

  Have you installed Dell Intel drivers support site video fron?

  Update the BIOs on the computer.

  Click on the link below to update BIOS:

  http://Dell.to/13kNGMc

  • During the update of the BIOS, check that the computer is connected to an AC adapter.
  • Disconnect all third-party devices connected to the computer before performing the BIOS update.
  • Do not turn off the computer during the BIOS update.
  • Do not restart the computer during the update of the BIOS.

  Note: Plug your computer into a wall socket, work before update you the BIOS. If you experience a loss of power or voltage important sag/tip during the BIOS flash, you will need to either buy a new BIOS chip or buy a new motherboard.

  In addition, run hardware diagnostics on the computer. Restart the computer by pressing the power button FN and at the same time. Let the full diagnosis.

  Waiting for your answer!

• HP Pavilion DV6: at startup BIOS showing CPU fan has stopped working, but I checked the fan is in good condition

  Hello

  I bought my HP Pavilion dv6 laptop 2011 as it starts a is overheating, freezing windows with noisy fan sound etc... but now, on information in BIOS boot indicating that the CPU fan has stopped working so immediately, I checked that I couldn't hear any noise from fan and no symptoms as fan works so I disassembled my laptop and removed CPU cooler fan only. Simply with the help of the battery, I checked the CPU fan it is running perfectly alone. but it does not work with the laptop.

  Please help me and guide what is the cause of this problem and how to solve this problem.

  Gassab

  HI @Kartic

  Welcome to the HP Forums!

  This is a fantastic place to find answers and suggestions!
  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  How can I find my model number or product number?

  I understand that since you had the laptop he had an overheating problem with a loud fan noise that causes freeze it.

  Recently, you have received the message that the CPU fan has stopped working and you couldn't hear the rotation of the fan to the top.

  You have removed the fan and checked, but the fan works.  It is possible that the connection was not safe in Notepad.

  Here is a link to an overheating and Auto Shutdown problem troubleshooting.

  Have you checked for an update of the bios of your laptop. You have provided the series of laptop you have, but not the exact model, so I'm not able to check it for you.

  You can run the Wizard to help HPin order to facilitate this process.

  Like a bios update has the potential to cause damage, you can contact HP technical support using this procedure.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  Here is a link to the guide to maintenance and Service Guide HP Pavilion dv6000 Notebook PC for your laptop.

  You can replace the thermal paste on the processor. Here is a link to a YouTube video on this process.

  How to apply thermal paste

  Good luck!

• 500-210qe Pavilion: Pavilion 500-210qe: cpu fan not detected after update BIOS

  Pavilion 500-210qe started showing ' 511: cpu fan not detected; F1 = boot' message.  I checked the BIOS rev level and set to upgrade to the latest (80.13 FRIEND) but the problem persists.

  At startup, the cpu fan is not running, but after pressing F1.  Please notify.

  From the least expensive option, replace the cpu fan (which comes with the heat sink) has solved the problem.

• Satellite 2410-404: screen is lost and the noisy CPU fan

  Hello

  first: sorry for my bad English.

  Now: I have several problems with my laptop:
  1. the monitor/screen is lost and does not stand up, so when I want to work with my laptop, I need to address something against the monitor, so it does not fall on the side. All the solutions to this?

  2. my Cpu fan is really strong and I have already opened the case and cleaned, but every day the noise comes back (assumed that his doesn't turn not very well and communicating with once in a while a part of the computer) and I have to reopen and touch several times until it works normally.

  3. Furthermore, I lost my CD of Windows Recovery (OEM Version). Do I have to buy a new one if I want resettled windows?

  Thanks for any help

  Hello

  1. I guess the lid can not stay in the right position, because the hinges are a little loose.

  2. it looks like something wrong with the rotation of the fan. In such cases the easiest way is to change the fan.

  3. you can buy the CD recovery form the Toshiba service partner in your country. It s not very expensive.
  But you can also install the original Windows operating system on your laptop and then you can install the drivers of Toshiba and utilities. All Toshiba stuff, you'll be able to download from the Tosh driver page.

• Error: Failure of CPU fan

  The original motherboard was not on my Pavilion a6528p. I got fed up with accidents several blue screen whenever I started to use it. Once he ran for a while (an hour or two), he has generally kept running. Worked to try to eliminate the virus/malware (multiple programs found no no), the memory test (used memtest86 +, ran all night without fault), CPU test (Prime95 torture test used, ran all night without fail) decided to try another motherboard. Not able to find a new, so decided to take a chance on a used.

  The jury used (so far) has never crashed. It is therefore a good thing. However, every startup I get the message "ERROR: CPU fan failure! Press F2 to continue to start. "I believe that this message is incorrect because I ran Prime95 torture for hours test and the temperature of the Processor reported by CPUID HW Monitor program is around 52 degrees c for each carrot. When I run Prime95 torture test, the temperature of the CPU are much lower, around of 38 degrees C.

  The HP support document http://support.hp.com/us-en/document/c00013522 describes in detail by selecting Hardware Monitor in the Advanced BIOS menu. There is no choice in the latest version of the BIOS, I installed on the HP website, which identifies as BIOS Version/Date American Megatrends Inc. 5.43, 10/09/2009.
  
  Because the help document is incorrect and no help, someone has ideas how to eliminate this message CPU Fan has failed, what happens whenever I start the computer?

  JimK Hello,
  
  Not all BIOS versions have the same settings and you're right that your BIOS is not this setting. Looking at what the settings you have (http://goo.gl/1mCvq) there is no parameter, you can change even not to ignore the message.
  
  The motherboard doesn't like not the CPU fan that is currently installed, if the fan is not mounted in quick power enough, do not provide enough cooling, or is simply not sufficiently powered is unknown, nor can it be determined. You can try to unplug the CPU fan and reconnect to ensure a solid connection. Probably, you should be able to say that the CPU fan turns so you can figure out if she has no or not enough quickly.
  
  Your options after that are to
  1. process by pressing F2 at startup to work around the error
  2. try another fan for processor to see if you can get the motherboard like.

• «the cpu fan works not.» Check the fan connections and call for service. »

  I was wondering if a failure of different from 'CPU fan has failed... system in a few seconds will stop. " I have an office of DX - 2000 P4 under XP SP3 that I just changed the motherboard and CPU fan on. All the fans are running at about the same speed. (P/S, chassis and CPU). Not very fast but cannot see the fins. Computer sat for several years. I was wondering what is the real test and how the fan speed is controlled. I suppose that temperature sensors built into the cpu, somehow, there must be a variable voltage applied to the fans to change their speed and/or a measuring device to see what is their RPM. This must be controlled by the BIOS as is any pass/fail test. My next step is to replace the old fan and see what happens. I have a new p/s to install should be here today. Actually used, but cleaned up and tested. Economy of cleanup. Not sure if my older diet could be the cause of the issue with low Volt.

  If the fan is slower than the factory fan, you will have this problem.

• Video and audio staggering

  The video and audio on my Acer Predator GS-605 is staggering and even froze the machine a couple of times.  I've owned the machine for 5 months now and it only started happening last week.

  OK, that is said by the way, I see a lot of discussion on this issue in the course of the last 2 days, all pointing to some windows update.

• CPU fan failure

  I have a Compaq SR5510F and when turn it on, the error message: don't have a CPU fan.  I took off on the side of the processor, and two fans that I see are turning very well and one that is in the box also turns fine.  Is the CPU fan, one upstairs that you can not without disassemble everything?  What should I do?  Anyone else have this problem with this model?

  There are 3 fans in the SR5510F. The PSU (Power Supply) contains an extraction fan. The system fan is also an exhaust fan. The CPU fan is mounted on top of a metal radiator. The message "CPU fan has failed" is triggered by a sensor. The cause can be a dusty fan, or obstruct the fins of the heatsink or a fan that runs too slowly to dust.

  See this document

  

• Noise of Dell Studio XPS 9100 CPU fan failure CPU fan

  My Dell Studio XPS 9100 did a loud intermittent noise for a few months and then last week I got a CPU fan fault message while booting. I blew all the dust from the fan and I always get the CPU fan failure message. I finally got the system starts by placing a small fan blowing air into the funnel will CPU/processor fan.

  Alas, my warranty expired 2 weeks ago. I'm kicking myself contacting technical support a few months ago, when the problem started.

  I need to replace the fan. What parts need me, and where can I get them?

  Thanks much for the reply.

  Thank you. After being tossed a little I transferred to the sales and ordered a new CPU fan for a cost total which includes shipping and taxes of $42.25. Too bad it wasn't 2 weeks ago, then she would have been free.

  The seller said that I would not need thermal paste. Is this correct?

  Best regards

  Them

• CPU fan failure: Dell inspects the expedient to the customer before computers the they?

  After waiting 11 days which includes I believe a week in the production of my Tower, 17/11/2015 I finally received my new Inspiron Desktop Edition Gamer (Intel). I turned on the computer and guess what I saw on the screen "CPU Fan Failure".  So now, I have to return the tower to a Dell for a tech to fix the problem with the fan.

  Here's my question. Fact or not Dell inspect their product before they will deliver to their customers? Well, Dell has not delivered the product if a "CPU Fan Failure" had existed before shipment.

  Unfortunately things can occur in vessels too...

  Before send back you, open the case and check if the cable is correctly connected to the motherboard. The cable may have jumped out of the motherboard.

  Just unplug it and plug it back to the motherboard. If it's totally off the Board, you can go to the Support page for this exact model and look for the link at the top of this page for the manual. Most service manuals show a diagram of components/connectors on motherboard and CPU fan connector must be checked.

  If everything's fine, which solves the problem, so you won't have to send again.

• Video and Audio not connected

  Somehow, I'm away PP CC 2015 in a State where I drag a video clip in the project and then to the timeline, the video and audio are not related?  Below, he thinks they are, but in the timeline I can drag video and audio around as they are not?  This just started happening.  Normally when I drag a video clip on the timeline, the audio and video are linked, and when I drag a he drags both unless I'm going to Clip and separate the.  What I did wrong and how to do go back to the way it worked by default?

  Thank you

  
  Dave

  Try clicking on this button:

  

• a610n - fan error of the system after replacing the motherboard

  Hi all

  I just replaced the motherboard on my system (phone http://h30434.www3.hp.com/t5/Desktop-Hardware/M2N68-LA-Narra-2-Replacement/td-p/3711774) and now I get this error when starting: Fan failure system, PC service to avoid any damage. I thought it was the CPU fan but he was running and after some research, I realized that he could talk a case fan.

  As a side note, the motherboard, I had was a little different and missing 2 connections that seem to be the front mic/headphone and USB ports.

  Now, the case's fan then what really is the problem? Any ideas anyone?

  Thank you

  -Panos

  The rev3.02 of M2N68 - THE Committee a case fan rear 3 poles. See here.

  The CPU fan is a 4 pin cable and attaches to the appropriate header to 4 pins on the motherboard. See the representative schema above.

  As for you, another question, the front USB port attaches to a USB connector on the card.

• Satellite A100-998: Audio of abandonment/glitch when CPU fan starts / stops

  Hi, I have had some problems with my streaming audio, as well as the inputs and outputs. I have read several posts on these forums of users who have the same problems, but the positions were closed without a resolution on an appropriate fix. These posts are also more than 1 year.

  The problem is that I'm an audio glitch when the cpu fan starts and stops. I updated to the latest version of the bios and installed all the latest audio, display and network drivers. and the problem is still there.

  I was my latency of the surveillance system and stop systematically various devices to try to locate the cause, but the problem still persists.

  Previous discussions of the forum on this subject suggest we find a solution by changing drivers processor ACPI to standard PC that will, among other undesirable things, keep the fan on constantly elimiating the seeds. I think that this is not an appropriate solution.

  As all other forum threads have been closed for more than a year, can anyone help me with a solution to this problem.

  Thank you.

  > Previous discussions of the forum on this subject suggest we find a solution by changing drivers processor ACPI to standard PC that will, among other undesirable things, keep the fan on constantly eliminating glitches. I think that this is not an appropriate solution

  As you know, it is only a user forum and you won't encounter technicians Toshiba here. This is why the solutions posted above was provided by individual users and may be true, but who knows if it would satisfy every user unique is only an idea and suggestion.
  I think you should communicate with ASP in your country for a notebook check possibly technicians could provide another solution that would suit everyone

  Greetings and good luck guy

• HP pavilion g6-1304sv: the Hp pavilion g6-1304sv CPU fan replacement.

  Hello I have a hp pavilion 1304sv g6 and I want to replace the cpu fan, please indicate in what spec I write to find one to buy or if you can show me a link to amazon or something. Thanks for your time.

  Here is the Service Manual:

  Manual

  page 24 it's your fan, since you have intel video dedicated and chipset hm65:

  For use in Intel HM65 discrete computer models 641141-001

  I couldn't find one for a reasonable price on amazon or ebay. I can find just the fan and you can reuse the heat sink, but which requires an Assembly and disassembly.

  http://www.eBay.com/ITM/new-for-HP-Pavilion-CPU-cooling-fan-643258-001-641141-001-643364-001-657942-001-/181415497977?hash=item2a3d34d0f9:g:6hAAAOxyBvZTQ

  You can also get just the radiator part:

  http://www.eBay.com/ITM/cooler-for-HP-G4-G6-G7-G4-1000-G6-1000-cooling-heatsink-643257-001-641141-001-/161911751836?hash=item25b2b1449c:g:H8wAAOSwBahVQZQ4

  It must be shipped quite a distance.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.