No video playback with first 8.1 upgrade

Similar Questions

• Portege R700 - problems with video playback with resolution more 360 p

  I have this problem of video playback on the first day. While for example on YouTube, video resolution than 360 freeze while the sound is ok.

  I contacted Toshiba whereby I had a linke for the bios and latest drivers. After the upgrade question persists. Sometimes I get a green screen by watching the video flash as well. I guess it's a hardware graphics card problem. Any ideas? Thank you! (Portege R700 19 L, win7 pro 64)

  Do you have this problem in full-screen-only mode or in full and normal mode?

• Do not import correctly C300 images, video playback in first is frozen or just a red screen

  After working with C300 sequences for about 6 months now, it's the first time I encountered this problem, and I did not something differently with this project to my knowledge.

  I work with a few sequences C300 (not much, not even a full 32 GB card) and when I bring it in first part, but not all, the clips are not able to read the. In some cases, the video freezes on a frame, while the sound continues to play, in other cases I'll just take a red box during audio playback. In all cases, audio playback is fine, no problem.

  The problem only occurs on more, interview clips. I did have problems with clips less than about 1-2 minutes in length. When I get the screen frozen or red, it will remain frozen or red for a while, more than a minute or two minutes, before the video comes back to the end of the clip. It is quite inconsistent if, I have not noticed a pattern.

  Regardless of whether or not the film is rendered, problem remains the same. Or there is a problem with playing late, if I stop the clip when the red screen comes up and wait never struggling upward, don't thaw never. I tried to import the images in several ways: by dragging in the project of the Finder. navigate through the first media browser; clicking file > import. Same question every time for the same clips.

  If I try to export the clip, the same question. If I try to align the images directly from the Finder on Media Encoder to output a version ProRes422, same question.

  However, if I take the structure of the card and copy it onto a CF card and it pop in my C300, it reads very well. No red images, do not freeze, no problems. This isn't a corrupt card and it's not like I lost all the data in the copy of the card to the computer.

  I work with first CC 2014 on a 2012 Macbook Pro (i7 clocked at 2.6 ghz, 16 GB RAM, 2 GB of VRAM), I tried to use OpenCL, CUDA and software only as the renderer, same problem with everything. I also tried several computers with the same question.

  Any help would be appreciated!

  Sam

  Thank you all for your answers; they led me in the right direction and I managed to find a workaround. In response to the various questions and comments:

  Jude, thank you for your suggestion. I was able to open images in VLC and it played very well so that licences to confirm that he has not been corrupted.

  Robert, I spin 10.9.5 as well, but this is the first time I had no problem with C300 images in any program.

  Kevin, Yes, I'm ingested through the media browser. As I mentioned in the first post, I tried, as well as slip and fall and file > import, which gave me the same result. It is a CC 2014 20141 update project, and it was even a version before the initial release of 2014. I did not rename individual media files, but see below for my work around.

  So, my solution:

  1. I copied the map and structure files on a map see As I mentioned in my first post, I have done this and can read the images very well if I popped the card into my C300.
  2. Open map in the Canon XF Utility. Here the images read very well as well.
  3. Select the relevant clips and choose Edition > export to MXF format...
  4. Then, when I imported the new files MXF (via the media browser) sophomore, clips to read very well. I have not seen any glitching, freezing, red images, etc.

• No video playback in first test CS6

  Hello

  I try to use the trial of Adobe Premiere CS6 on my laptop but I can't get the video playback to display at all. There is just no video audio playback. I can get a frame suspended to show if I double-click on the playback area, but pressing play does not play the video, audio. Stop playback displays the last image current again.

  Plug my laptop is as follows:

  • Toshiba laptop
  • Intel i7 2.40 GHz
  • 8 GB RAM
  • 500 GB of free space
  • Windows 8 64
  • Last installed Intel display drivers

  Video files, I am importing my sequence are .mov files, 1920 x 1088 @ 23 FPS.

  Any help will be appreciated!

  Thanks for your time,

  -Benjamin

  Last installed Intel display drivers

  Unfortunately, Intel made large chips, BUT have ignored the update of video drivers. What is the date of your ' last display driver?

  To work with any version of first, later versions of Photoshop and After Effects, recommend more wrong with an integrated Intel video chip. Check those who work for general computing, such as Web browsing, e-mail, word processing and spreadsheet work. In addition, they fall a lot, a lot, behind with the updates of the video driver.

  Good luck

  Hunt

• Keeping the backlight on during video playback with alarm does not not with OS 4.7 round

  I am developing an app that plays the video using the alarm, like this:

  player_ = Manager.createPlayer(url);
  player_.realize();     
  
  VideoControl_ = (VideoControl) player_.getControl("VideoControl");
                  videoControl_.initDisplayMode(VideoControl.USE_GUI_PRIMITIVE,                 "net.rim.device.api.ui.Field");
  videoControl_.setVisible(true);
  player_.start();
  

  The duration of the video is longer than 2 minutes. On OS 4.6 device such as the curve, the video plays without the screen goes black.

  However, on the circuit of 4.7 OS, screen goes black even if I try to activate the backlight on regularly, like this:

          final Timer t = new Timer();
          TimerTask tt = new TimerTask()
          {
              public void run(){
                  Backlight.enable(true, 240);
              }
          };
  
          t.scheduleAtFixedRate(  tt, 0, 240000 );
  

  The integrated application of Media Player can play the video even without the screen going dark.

  How can I avoid the screen of goes black on device OS 4.7 during video playback using VideoControl?

  Thank you.

  Now works with this change:

  t.scheduleAtFixedRate(  tt, 0, 24 * 1000 );
  

• No video playback in first Pro CS5.5

  Video playback is completely insensitive. show the program monitor through all that is at the origin of the program (for example-, the office or anything that is open). I have a GTX560 Ti graphics card and I've already activated as a CUDA taken in charge for the "Mercury Playback Engine acceleration GPU". I am new to use the forums for help with these issues. Help, please.

  Wow, I've spent a lot of time to go through all these links recommended. I did everything you said and I finally figured it right before I was about to send you a HUGE response. I just need to adjust video Image settings under the control panel of Nvidea NVidea settings rather than the video player settings. A really easy solution. I am happy that it was not something big. Thanks anyway, sorry if I've wasted your time. I learned a lot, however, and not only to set up a post for my problem clear.

• Video playback with the scale is "scrambled" and not

  Hello

  I have been working on it quite widely and could not find a solution. I've seen this thread:

  http://www.BlackBerryForums.com/developer-forum/159304-playing-videos-BlackBerry-J2ME-app.html

  But the presented solution did not help me.

  I am creating a video player using MMAPI I can use the RIM API too if necessary, but given that my request is more focused on canvas I prefer using MMAPI (the application derives from full screen and use the rim API). When I try to play a video the application adapts to the position of the user interface, it works on all devices non - rim with the MMAPI code that I use but the breaks on the RIM.

  Is there a form any workaround on the video scale on RIM devices?

  I am currently using VideoControl.USE_DIRECT_VIDEO, but I tried the USE_GUI_PRIMITIVE sunk to the field with similar results. The only solution that worked for me was to avoid the scaling that is not a solution... Are there examples of code that does something like that with success?

  BTW I use 4.7 and 4.5 simulators and video, I'm playing is of the video sample that comes with the Simulator (EmbeddedMediaDemo: BlackBerry.mp4).

  Thank you.

  If the size of the original video (I mean dimensions) is smaller that you use during playback - video will be blurred.

  It doesn't matter how device, API, regardless.

• Subtitles do not appear when I play my video exported with first Pro CC

  So, I've spent some time cela, but can't seem to get anywhere.  I'm relatively new to Premiere Pro and I created a sequence with captioning.  I tried to export several different ways (Quicktime, H264, etc.).  I was also careful to include a subtitling sidecar file or to incorporate subtitles into the video when you export using Quicktime.  I was also sure that the two files (the film and the SCC file) are in the same place.  I tried different versions of the video exported using Quicktime Player and VLC, but had no chance to get the subtitles to appear.  In Quicktime player I've tried it with active captioning, but this does not seem to make a difference.  In VLC, I tried the Advanced Open option which allows you to select the subtitle file, that you want to load with the film.  Once again, no luck.  I tried to drag / drop the file *. CSC on the movie then it plays.  I tried to select a subtitle track using the drop down below the video.  Once again, no luck.  I tried exporting the file as a .mcc of Premiere Pro and that no longer works.  I even tried to convert the file *. CSC to .srt app file online.

  In any case, I'm stumped.  All I want to do is get my film to play with subtitles with a simple application.  Any help would be appreciated.  Thank you.

  S. @@

  Sorry, Fritz. It's been a while since I really look to the help page of captioning, and I just assumed that the workflow new legend is covered here. And a second apology because the State of this page is at least partly my fault insofar as I promised our technical editor months ago that I would expand this page.

  You don't do something wrong when it comes to set the start and end for legend blocks. In the timeline panel, legend titles are basically only display. The apparent handles are really just indicators; they are not interactive. I think it's our road map to make them interactive, but I have no idea wherever improvement is in the order of precedence.

  I'm not sure what you mean about "each caption track block [being] limited to a little more than 30 seconds. If there is a maximum of a clip of the legend, it is probably 12 or 24 hours. I have worked with many that are more than an hour. With respect to the individual legend within clip blocks, my memory has grown blurred in the months since I worked on the feature, but I think that the program does not impose a limit on the duration, you can give a block. However, there may be a limit on how long a given legend block will be actually are displayed. I thought the limit was 15 seconds, but I just did a test with blocks of 10, 20 and 40 seconds, and each of them had completely given duration in the encoded output. Maybe the limit that I think is a specific standard... Come Monday, I'll have to check with colleagues who remained close to all of the features.

  Note that if you add a caption element in a sequence until you have finished adding blocks, then you will need to cut the clip after increasing its duration by adding blocks.

  Finally, although the first creation of the legends from scratch media feature set was designed mainly to import captions created in a tool of creation of third party and, if necessary, revise the content and control the synchronization.

• How can I turn preview my (90 degrees) video playback with windows media player?

  Some of my videos are shot the wrong sense watching them read (using windows media player) how can I turn / rotate or it is seen (90 degrees) so I can watch them without having to tilt my head sideways?

  Hello

  · Are these recorded videos?

  · What is the format of the video file?

  a. you try the steps and check them off below if it helps:

  b. import the video clip in Movie Maker.

  c. drag any video clip and drop it on the timeline.

  d. on the Tools menu, click Video Effects.

  e. to rotate the clip to the right, drag the Rotate 90' video effect and drop it on the movie in the timeline.

  f. on the file menu, click on the video file and follow the instructions of the wizard movie recording.

• Preview the video in Adobe first Pro CC stutters badly all playing on a portable powerful

  I bought 4 months ago relatively powerful computer laptop specially for my needs of video editing with first Pro CC, but so far it has been very frustrating experience.

  Lenovo Y40-80

  Intel i7-5500U

  16 GB OF RAM

  SSD 512 GB

  AMD Radeon R9 M275 4 GB

  Screen LCD 1920 x 1080

  Play timeline (4K clips without any effect applied) in the window saccade preview so bad that it is almost impossible to use the software. Reading is relatively smooth 3-5 seconds and after that it significantly slows down to 2-3 frames per second (the other images are deleted).

  I tried all the latest AMD Catalyst, including the version beta drivers. Complained about the AMD forum. Reduces the resolution of reading from 1/2 to 1/8 with no visible effect. In fact even the discreet GPU through the BIOS turn off have not declined over the playback speed. Passage of the first CC (2014) to CC (2015) doesn't change anything either.

  Interestingly enough, feature as 4K quality export works well enough, with a speed comparable to my office for 4 years. The office manages very well the process of edition, and based on the specifications of the laptop must have about the same performance as the office.

  Suggestions, please?

  your cpu is one of the scam i7 from intel. It is a core 2 and not 4 core performance is cut in half compared to the 4 core i7 about the same price. for comparison, your cpu is the same speed as an office i3 cpu. You can try to sell the lenovo and get an i7 core 4 with a gtx 970 m or 980 m.

• Problem with WEI: could not measure the performance of video playback.

  Hello, Microsoft

  First of all I'm new to the forum, Please warn me if I posted in the wrong section, or did something wrong.

  I have a laptop, (x 86) Win7 Home Premium. Before posting, I tried everything Microsoft sugguests and nothing will do, as the update of the graphics card, etc. WEI did not work as usual today, I got the problem said: could not measure the performance of video playback.

  Here is the winsat.log

  180337 (1304) - winsat\logging.cpp:0815:-BEGINNING 2014\1\23 20:20:42 -
  180337 (1304) - winsat\main.cpp:4301: command line = "C:\Windows\system32\winsat.exe" formal - CancelEvent 0f602be3-3268-4fb8-be81-0ebe47022e9b
  180337 (1304) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occurred
  180352 (1304) - winsat\main.cpp:4474: > IsFormal is TRUE IsMoobe = FALSE.
  180399 (1304) - 4585: Watch dog system active
  180399 (1304) - winsat\main.cpp:4600: watch dog timer 600.0 seconds hand
  181491 (1304) - winsat\main.cpp:2505: > DWM doesn't work do not.
  181491 (1304) - 2470: > EMD service will be restored to the exit.
  181507 (1304) - 0983: > read the active power as «381b4222-f694-41f0-9685-ff5bb260df2e» mode
  181507 (1304) - 2793: > power policy saved.
  181928 (1304) - winsat\syspowertools.cpp:1015 >: 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c value of the power system active"
  181943 (1304) - winsat\main.cpp:2814: > policy set to maximum power.
  183020 (1304) - winsat\logging.cpp:1763: ERROR: phase enter/leave imballance
  183020 (1304) - winsat\main.cpp:0948: > IsOfficial = TRUE IsFormal = TRUE IsMoobe = FALSE RanOverTs = FALSE RanOnbatteries = FALSE
  183035 (1304) - winsat\main.cpp:1775: > Run Assessment features
  183566 (1304) - winsat\main.cpp:1775: > Run Assessment dwm - aname DWM-time 10 - fbc 10 - disp off - normalw 12 - width 1280 - height 1024 - winwidth C (1144) winheight - C (915) - rendertotex 6 - rtdelta 3 - nolock
  184190 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  184190 (1304) - winsat\processresults.cpp:4018: > wrote bandwidth video memory to register 0
  184190 (1304) - winsat\main.cpp:2037: > DWM Assessment results treatment SUCCESS
  184190 (1304) - winsat\main.cpp:1775: > Run Assessment d3d - aname Batch - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 300 - batchcnt c, point 10 objs - C (26) - rendertotex 6 - rtdelta 3 - texpobj c (1)
  184767 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  184767 (1304) - winsat\main.cpp:1775: > Run Assessment d3d - aname Alpha - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 300 - batchcnt C (75) - C (26) objs - rendertotex 6 - rtdelta 3 - texpobj c (1)
  185344 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  185344 (1304) - winsat\main.cpp:1775: > Run Assessment d3d - aname Tex - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 500 - batchcnt C (125) - C (20) objs - noalpha - texshader - totaltex 10 - texpobj c (4) - rendertotex 6 - rtdelta 3
  185906 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  185906 (1304) - winsat\main.cpp:1775: > Run Assessment d3d - aname ALU - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 500 - batchcnt C (125) - C (20) objs - noalpha - alushader - totaltex 10 - texpobj c (1) - rendertotex 6 - rtdelta 3
  186467 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  186467 (1304) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname Batch - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 300 - batchcnt c, point 10 objs - C (26) - rendertotex 6 - rtdelta 3 - texpobj c (1)
  187013 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  187029 (1304) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname Alpha - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 300 - batchcnt C (75) - C (26) objs - rendertotex 6 - rtdelta 3 - texpobj c (1)
  187591 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  187591 (1304) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname Tex - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 500 - batchcnt C (125) - C (20) objs - noalpha - texshader - totaltex 10 - texpobj c (4) - rendertotex 6 - rtdelta 3
  188168 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  188168 (1304) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname ALU - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 500 - batchcnt C (125) - C (20) objs - noalpha - alushader - totaltex 10 - texpobj c (1) - rendertotex 6 - rtdelta 3
  188730 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  188745 (1304) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname GeomF4-time 7 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 150; 200; 241 - batchcnt C (50); C (200); C (300) - objs C (12); C (26); C (45) - noalpha-geomf4shader - texpobj C (0) - rendertotex 6 - rtdelta 3 - tierframes 60 - tiertime 1
  189291 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  189291 (1304) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname GeomV8-time 7 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 75; 100; 120 - batchcnt C (25); C (100); C (150) - objs C (8); C (17); C (29) - noalpha-geomv8shader - texpobj C (0) - rendertotex 6 - rtdelta 3 - tierframes 60 - tiertime 1
  189868 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  189868 (1304) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname CBuffer - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 75 - batchcnt C (25) - objs C (8) - rendertotex 6 - rtdelta 3 - texpobj c (1) - cbuffershader - cbufa 2 - cbuff 5 - cbufp 6
  190430 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  190430 (1304) - winsat\main.cpp:1775: > Run Assessment mfmedia-input C:\Windows\Performance\WinSAT\winsat.wmv - nopmp
  190804 (1304) - media\mediaerror.cpp:0151: mfmediatest.cpp @ 445: 0 x 80070070 == ERROR_DISK_FULL
  190804 (1304) - media\mediaerror.cpp:0095: error: failed to start NT Kernel Logger.
  190820 (1304) - winsat\main.cpp:2056: > assessment mfmedia FAILED because of an error
  190836 (1304) - winsat\processresults.cpp:4018: > wrote bandwidth video memory to register 0
  190836 (1304) - winsat\processresults.cpp:1274: not limiting DWM Score 1.0 - no DWM performance score
  190836 (1304) - winsat\processresults.cpp:1405: this WDDM, considering D3D score 2.0
  190836 (1304) - winsat\processresults.cpp:1480: > partition disk writes in register 0
  190960 (1304) - winsat\syspowertools.cpp:1015 >: 381b4222-f694-41f0-9685-ff5bb260df2e value of the power system active"
  190960 (1304) - winsat\main.cpp:2855: > state restored power.
  190960 (1304) - winsat\main.cpp:2870: > Successfully reenabled EMD.
  190976 (1304) - winsat\main.cpp:2896: > SystemRoot Composition
  190976 (1304) - winsat\watchdog.cpp:0311: Watch dog system shutdown
  190976 (1304) - 4909: > exit value = 1.

  Please help, THX 1 billion

  Hello Derek,.

  Please keep us updated on the status of the issue.

  I'm sorry for the late reply.

  The IFE can be used to show what part of the system should provide the largest increase in performance when it is upgraded. For example, a computer with the lower under-score in his memory, would benefit more than an upgrade of RAM to add a faster hard drive (or any other component).

  Also see this article:
  What is the Windows experience index?
  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-experience-index#what-is-Windows-experience-index=Windows-7

  I hope this information helps.

  Thank you

• In Movie Maker 6.0 can a video clip (with mute) be spliced in another video clip so it seems to work with the original sound of the first video?

  Hi, I put a video together for my MOM to 70th and one of her friends has provided a video clip of her playing a classical piece on the piano for several minutes.  I would like to cover this clip with other video sequences (landscapes, etc.) whereas the way piano since the main video track in the background.
  I tried to let fall the piano video file directly in the audio editing panel and then cut a second 20 segment in the video editing and insert a 20 second video (mute) images of landscape. However, the piano audio from the first video stops as soon as the strike chronology inserted piece landscape and picks up again when it ends, even if the audio scenario shows the audio piano continuously?  Am I missing a step or is this not possible?   Thank you very much.

  It should work quite as much as you described in Windows Movie Maker 6.0 (WMM 6.0), then maybe there is a step that is missed.  Let me describe how I could do and see if there's something you overlooked.

  First of all, I assume that you have already imported the clip of piano and your other clips of landscape in your collection then you can drag the there where necessary.  First, drag the piano music to the track Audio / Music in the timeline panel.  Note that if you have your video extended timeline, it will show video, Transition & Audio, but you want to get off- below that, to the Audio / Music , to follow.  At this point if you play your 'film', you should not to see any picture but just to hear the sound of the piano.  You should also only see a waveform on the audio / music.

  Now you can put anything you want on the video track.  Let's start by putting another copy of the original video of piano, but this time on the video track.  If you have developed the video track (to see the Vidéo/Audio/Transition) you will see the video piano and its associated audio waveform.  However, in your case, since you already have the audio separated, you want to cut that his partner.  Right-click on the Audio (attached to the video) track and select Muteor use the menus (Clip > Audio > Mute).

  When you preview the project, you have synchronized video browsing with the original copy of the audio piano.  At the point in the video where you want to replace the video with another piano play, making a split (key M).  Make another split at the end of the section.  It is very import that select you the video track when you add new divisions and you have not also be divide the track Audio / Music .

  Important: You want to make sure this divide the part that has the exact duration as well as landscape images, you want to replace.  So if you have 20 seconds to add, you divide 20 seconds piano images.

  Right-click on the part of piano footage (video track) and choose Remove.  Then, insert the part of sequences of landscape (also on the video track) in its place.  Once again, you will have need put this added sequence muted landscape (Clip > Audio > Mute).

  You should now see and hear the piano play.  Without any change in the audio playback in the preview window should implement the landscape images, then returns to piano images.

  If you find that your project is not behaving correctly after these splits, but are you sure that you have followed these steps, it could be a problem with your video file types.  If in doubt, try to convert all your videos to .wmv format using something like Freemake Video Converter (freemake.com)

  In any case, I hope that you are able to achieve, because it is certainly possible.  Good luck and post back with further questions or information, you can have.

• When burning a dvd in media center of vista, video playback is jerky as I watch live TV in media center or play a video file with any player

  When burning a dvd in media center of vista, the video playback is choppy. Time to watch live TV in media center or the playback of a video file with any player. How can I fix this. my display driver allows hardware acceleration settings.

  Hello

  Try to upgrade your graphics card to the latest drivers and check.

  You can also check this link:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If not try running SFC scan.

  http://support.Microsoft.com/kb/929833

  It will be useful.

• Video playback very slow failure with iGPU and dGPU activated simultaneously

  Until a few months ago, my PC has been run with an i5 760 and my current Radeon HD 7850 on items 11-first reading was smooth and I could edit my videos fine.

  However, recently I installed a new processor and motherboard - a 4770K i7. The key thing here is that it has integrated GPU (so called "iGPU") that can operate in tandem with my current dGPU (discrete GPU, the HD 7850) by the presence of jobs such as the rendering of encoding videos and sent to the iGPU in a function called Quick Sync transcode. In order to use this, I had to link a virtual/VGA monitor to my motherboard port (because according to this post by vaesauce on the forums of the OBS), and for all applications that worked perfectly (Handbrake transcode very quickly, and I can listen to with OBS with negligible performance). Except one - first elements 11.

  When I started first elements 11 to edit a short clip yesterday, I was greeted with a screen that informed me that I had incompatible drivers. I went and checked my video drivers for both of my GPU - to both day - the reinstalled and restarted. Tried once more, the same question. Past to try and change just resulted in a complete failure of video playback and audio playback. I found the solution was to disable my iGPU in Device Manager, then it works fine.

  Now, here's my question - how can I have the dGPU and the iGPU active and able to edit videos with Premiere elements 11? It all works in this way, the constant entry in the Device Manager before and after the installation of a video is very annoying (also, I'm sure PrEl 11 would benefit itself from the QuickSync!)

  > found the solution was to disable my iGPU in Device Manager, then it works fine

  As far as I know, it's the only solution, because Premiere Elements is not really designed for double graphics cards

• no option to create a sequence with uncompressed video playback

  
  Hi all!

  I can't find the option in the new CC Pro first "create a sequence with uncompressed video playback.

  The reference (p. 176) of the Adobe website manual reads:

  "...

  1. Choose file > new > sequence.

  2. in the dialog box new sequence, click the general tab.

  3. in the Edit Mode menu, choose the desktop.

  4. in the time menu, choose the desired rate, such as the 24, 25 or 29.97 frames/second.

  5. in the video section, choose the settings you want for the size of the image, the pixel format, fields and display Format. For example, 1920 x 1080,

  Square pixels (1.0), no fields (progressive scan) and offset 30 fps timecode.

  ..."

  I can't find any tab general and according to the editing mode in the dialog box new sequence at all!

  There are only three tabs:

  Sequence of Presets, parameters, tracks

  What I am doing wrong?

  Hello

  You will find what you are looking for on the settings tab.

  1. file > new > sequence

  2. in the dialog box new sequence, click on the settings tab (do not use CS6 or 5.5 in front of me but I think it's an old copy).

  3. in the Edit Mode menu, choose custom

  4. in the preview File Format, click Quicktime

  5. in the Codec menu, choose your /As option

  Screenshot see annex for reference.

  Peter Garaway

  Adobe

  Premiere Pro