No wireless connection after using "PC Restore"

Similar Questions

• My laptop lost wireless connection after hibernation I or stop it. Then I have to reset the automatic Wireless Configuration to find my wireless connection

  I just bought a new NetGear wireless router and now my laptop lost wireless connection after hibernation I or stop it.  Then I have to reset the automatic Wireless Configuration to find my wireless connection.  Whenever I stopped him it and I have to choose.  This does not happen on another laptop or desktop that I have.  Is there a safe solution for this?

  Hi Ron,

  1 Windows operating system you are using?

  2. you receive messages or error codes?

  You can read the following article and check.

  Windows wireless and wired network connection problems

  If you use Windows XP, then read the following article:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  This problem can also occur when the power management profile turns off your network card.

  You can try the following steps and check if it helps.

  a. click Start, type device manager in start search and press ENTER.

  (b) in Device Manager, expand network adapter.

  c. now you will see your network adapter or adapters if you have more than one. Right-click on the network component, and then click Properties.

  d. go to the power management tab.

  e. ensure that all check boxes are unchecked (check boxallow the computer to turn off this device to save power is off).

  f. If you have disabled the boxes, click ok and restart your system. Put the computer in Hibernate mode and check if you still have any questions.

• Why do I have to restart my internet wireless connection after restart of Windows Vista?

  why I have to restart my internet wireless connection after restart Vista

  Hello

  Second time to answer that line however initially seems to have disappeared. The message displayed
  upward in my Threads as if there was a response.

  -----------------------------------------------------------------------------------------------------------------------------------

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• No wireless connection after you restart the computer.

  Original title: wireless connection problems

  Hello my name is justin knox my girlfriends computer mobile computer ASUS laptop with windows 7 each time you turn off the laptop and turn it on my wireless connections are not available for me unless I have help it how can I get this laptop to connect instantly without troubleshooting it powers on every time?

  Hi Justin,

  I imagine the inconvenience that you have experienced, but don't worry, we are here to help solve the problem and guide you in the right direction.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. Since when are you facing the issue?

  2. you have any security program installed on the computer?

  3 are you aware of any changes made to the computer before the show?

  If you have any anti-virus program I suggest you disable and check if it helps.

  Note: Don't forget to activate once you have finished troubleshooting.

  You can also go through the steps and check out them.

  Method 1:

  Make sure that if the autoconfiguration WLAN service is set to automatic.

  1. click the Start button, type services.msc and press ENTER.
  2. scroll down to the autoconfiguration WLAN service, right-click on it and select Properties
  3. click on the tab general, select automatic for startup type.
  4. click the Dependencies tab and make sure that all addictions services are set to automatic. Then click on the OK button.

  Method 2:

  
  

  1. open manage wireless networks by clicking the Start button, then Control Panel. In the search box, type Wireless and then click on manage wireless networks.
  2. click on add and then click on manually create a network profile.
  3. Enter the network information.
  4. If you want Windows to automatically connect when the network is in range, select the start this connection automatically check box.
  5 Select the connect even if the network is not broadcasting check box, click Next, and then click Close.

  For more information visit

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

  You can also turn off UAC (User Account Control) and check if the problem persists. After return from the status, so that we can help you better.

  Note: Don't forget to activate the control once you are finished troubleshooting.

  Hope that information was useful and let us know if you need help in the future about Windows. We will be happy to help you.

• Problem with wireless connection after the automatic update of Service Pack 2

  Do not see my wireless modem to connect after that Windows Vista Service pack 2 and the update of security were auto-mis to update last night.  Can see modems of neighbors but not mine.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  Or transfer your question in this forum: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• wireless connection after reinstall

  I just renewed my hard drive on a dell dimension 2350 [11]. I now have XP SP1 installed via disk reinstallationion OS. Now I have two questions.

  More urgent, I can't go back on a wireless connection. I couldn't find any disk that may be coming with my network card so downloaded a driver for my sweex LW053 adapt on the web. Now the computer not regognise my network 02 but despite the network key several times just don't connect. Is it possible that because of my only have SP! at the moment I can't connect why? Only I tried to load a 2008 version of AVG anti virus and it stopped the installation and was informed that my version of the SP1 of windows was not sufficient for the AVG function on. So as not be able to get online to update to SP3 I can not pre load to Project the computer anti-virus software when [if] IO manage to get online! That, s my two questions. Help with either or both would be greatly appreciated. Thanks in advance.

  You don't need to install sp2.  You can go directly from sp1 sp3.  See the second link 'HOW TO' in my previous post.

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

• Wireless connectivity after you install a new LAN modem.

  Installed new DSL modem/wireless router. Using WPA2-AES security for the wireless. All new wl in my local network components reacted very well. 2 units of wl, Sony VAIO TR3 and netbook Acer Aspire One, does not connect to the network. Both use XP svc pk 3. Pswd screen Sony allows WPA2-AES and I entered the pswd. The netbook has entry field for WPA-TKIP. I enter the password anyway. Neither connects via WIFI (both connect via ethernet very well).  Vietnamese to the new modem/router installation, both of these units connected to the local network very well. The previous security with the router was WPA-TKIP. Any ideas?

  Hello

  Different wireless routers treat differently security. Many cannot deal with double level of encryption.

  First of all the stage newspaper with a wire to the router and disable security.

  Make it work temporarily with open connection.

  Spend on wireless security, then to use the WPA - PSK or TKIP - which is in the router to two computers.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Satellite M70: Question on registration after using the restore CD?

  I have reinstalled the OS on my 70 M satellite using the restore CD and now system even once asked me to register with Microsoft and Toshiba. I've already done, so I jumped it. I just want to ask if I use the recovery CD, I have to register again with Toshiba and Microsoft, or is not necessary.

  Hello

  You n t need to save anything when installing Toshiba recovery image.
  The Toshiba recovery image is already out.
  You can register your device on the Toshiba site for more support, but this procedure has nothing to do with the recovery image record.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=000000147a

• Could not get the internet/wireless connection after you installed new hard drive?

  I have a HP Pavilion Entertainment PC (dv6736nr), Windows Vista laptop.  The hard drive crashed and I got a new installed.   I set up my wireless connection, even that is on the other 4 computers in this building (my desktop computer running win7 netbook win7 running 2 computers of the landlord, winVista running - they have comcast modem,? a good router) when I set up the wireless connection, it connects only 'local', no internet.  I researched this some, tried all the places with a parameter that can be a problem, but nothing helped.  What the hell did I miss?  The connection is good because it works on my desk, on which I write, as I said. To my knowledge, the hard disk the the wireless are not connected; or is it? Any help, the concrete steps that I take on my laptop, the settings themselves, would be greatly appreciated.

  Hello:

  If your laptop computer is the Atheros wireless card, you probably just update the driver.

  The symptoms you listed seem to indicate that is the problem.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99068-1&cc=us&DLC=en&LC=en&OS=4062&product=5185745&sw_lang

  Paul

• Internet lost connection after Vista system restore

  Hello

  I've lost the ability to connect to the internet after system restore.  I tried a few different dates, but have the same problem.  I have tried many of the rememdies on the forums, but now luck. I havn't seen all that is exactly what I'm going thru, so I thought that I have that would give a shot.

  The connection is through a wireless router.  No problem before the system restore (other than a virus major that I have my daughter!).  I have another computer I'm on now has been and still works fine.  I tried the following...

  Rounter unplugged for 5 minutes
  reset the network adapter
  reinstalled drivers
  several things through "command window" (do not remember so)
  I tried several dates on the system restore

  I'm so frustrated.

  I would be grateful to anyone who helps!

  Thank you
  Dave

  Hello

  1 you get an error message when trying to connect to the Internet?
  2. what web browser do you use? Is - Internet Explorer or a different browser?
  3. do you have any security software installed on the computer?

  Troubleshooting Internet connection problems can be a challenge because there are so many possible causes. First of all, try this step and check the result.

  Open Network Diagnostics by right-clicking the network icon in the notification area, then click on diagnose and repair.

  For more information on troubleshooting Internet connection problems, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Post back with the results, so that we can help you further.

  Kind regards
  Syed
  Answers from Microsoft supports the engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Printer gives up wireless connection after some time

  Printer HP Laserjet P1102w be. (No serial edition serial number by moderator) (Firmware 20130703)
  Windows 7 (64 bit)
  Wireless printer on network home.

  For a period of time, the printer print wireless and prints of the EPRINT addresses OK.
  Normally wakes up during the impression received.
  After a certain period of time, however, the printer stops in response.
  He did not wake up when the impression received. Normally wakes up during the impression received.

  I manually turn back on (power button on front) and keep to the following points:

  The blue wireless light is turned on.
  Blue error lights indicating that no error.
  the green light is also on.

  Open Control Panel (View devices and printers) on computer and it shows printer error.

  Can restore normal operation by unplugging for a few seconds and back on.
  Can also restore normal operation by turning off and then back on.
  Leave meeting again after a certain period of time when you try to print.
  I tried Windows troubleshooting and HP 'print and Scan Doctor '. Tells me to restart.

  How can I solve this problem?
  Can't reboot unplug or turn off when away from home so impossible to use ePrint to print address.
  Unable to print when you are far away printer when it will stop responding.
  Thanks for any help.

  I'm glad it works again.  Please fix this as accepted Solution so other can search and find the answer more quickly.

• My laptop cannot detect wireless networks after using the Windows Update service. Technical support, very desperate need.

  I tried the direct technical support, but it seemed to have cut. Given that I can no longer connect to the internet on my laptop, I'm with my playstation browser and painfully by typing with the controller.

  My probllem.
  I have an ASUS Intel Core i3 - 2350M CPU @ 2.30 GHZ running Windows 7 home premium. I've selected "Windows Update" in the start menu and proceeded to download and install all updates. Once the updates have been installed, my laptop couldn't detect wireless networks which means that I can't connect to my router and have lost the internet.
  Device Manager indicates 802.11n Wireless LAN Card is working properly.
  Windows did create a restore point before installing the updates, but everytime I try a restore I get the following message
  "System Restore has failed. Your computer's system files and settings were not changed
  Details
  System Restore could not access a file. This is probably because an antivirus program is running on the computer. Temporarily disable your antivirus program and restart System Restore.
  An unspecified error occurred during the restoration of the system (0x80070005)"
  "I disabled anti Virus AVG and COMODO firewall only to receive the same message, and it now appears that the restore point disappeared as if by magic, saying system restore ' no. restore points were created.
  Updating installed Windows the following
  Microsoft .NET Framework 4.5 1 4.5.50938
  Microsoft Office Home and Business 2010...
  Service Pack 2 for Microsoft Office 2010...
  Microsoft driver (keyboard) 21/04/2009
  Microsoft driver (mouse) 21/04/2009
  Driver Microsoft (System) of 21/06/2009...
  Microsoft driver (System) 21/06/2006
  Driver Microsoft (System) of 21/06/2006...
  RALink Technology, Corp. (Net) 02/04/2013 pilot
  Update for Microsoft Windows
  Update for
  Update for
  Well when the restore point was present he says that these things will be deleted that's where I got the list, but as I said the restoration failed and disappeared.
  I have reset my router but my laptop doesn't detect a network and there are usually 10 in the region and it shows nothing. My router is fine, as I use it now with my playstation.
  Please I really need help, how do I get my laptop to detect the wireless network. If someone could give me a few steps to do, please.

  Most laptops have a switch that turns the wifi radio on or off.  Often, it is a combination of the Fn key and one of the F keys.  It may be a physical switch somewhere on the laptop.  See your manual for details.

  If this isn't the problem...

  What is the brand and model of your router?  Almost all wifi routers also have at least one Ethernet port, you can connect your computer to the router with an Ethernet cable and download the right driver for your http://www.asus.com/support wireless card
  Have you tried to "Roll back driver" in the "Driver" tab of your adapter wifi 'properties' in Device Manager?  At the very least, determine which version of the driver is installed, and compare that to the current version on the asus support site.

• R7000, problems with wireless connection after the last firmware update 1.0.6

  I recently updated to the latest firmware available for the R7000...

  The upgrade went well and my Wired PC all connected without any problem, but several of my wireless devices were unable to connect to the WiFi. I have my cell phone Wifi (Android phone) kept gives me an error of authentication, but was able to connect to the network comments... weird...

  I started firmware 1.0.4 and everything worked well again... it seems that the new firmware is buggy.

  The Firmware versions listed above are only for the first three issues, to save typing, but you get the version that I use...

  Nick

  Hello

  I would like to let you know, I've improved in 1.0.6 last night and everything worked. The difference is this time I had to reset my router to the factory settings using the reset hidden at the back button and hold the button for about 7-10 seconds. This resets the router to the factory settings. I then had to re-enter all my IP address reservations and the word block list, but all my wireless devices were able to connect. The last time I did the upgrade, I just restarted the router, and I had read that I had to do a factory reset to operate correctly.

  It would have been nice for Netgear arrive at a way to extract Information form my version last-place back... it would have saved me a lot of time...

  Good luck

• HP Deskjet Ink Advantage 6525: Printer loses the wireless connection after a few hours

  Hi all!

  Printer is connected and I see on the IP address screen. Desktop with Win7 and Ubuntu are used. After passing on the printer is working properly, but a few hours more later his inaccessible from the two systems. Printer indicates connection, I can see it in the router's web access tool, but it is inaccessible. I have to power off the printer, restart the router, then power on the printer - and it works. Not very comfortable.

  Someone knows how to fix this bug?

  Hi varspb and SteveB21.

  Thank you very much for your answers!

  Please take a moment to watch this video:

• How to recover "Favorites" on browser after using "System Restore".

  After problems with the systems updates (update failed), I used 'more than 5 days of system recovery' to return to the time before the problem started. After the recovery of the system, all my "favorite quote" disappeared and I want to get back them.  I have an old backup DVD and wonder if I could use my computer until the back ups. The problem is that I don't know IFI load the DVD into my hard drive would do the job.  I'm afraid I can complicate the issue more before that I don't know what the DVD of loading would.

  Hello

  I suggest you do a system restore to an earlier point and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  It will be useful.