Non-functional wireless

Similar Questions

• Non-functional wireless on Portege M200

  I just got a new laptop Portege M200 to replace my old Portege 3500.

  With my old lappie, I connected automatically and without problems to 3 different wireless networks at work and at home. The new lappie connected to one of the networks right out of the box (after typing the WEP key) but it does not connect to the other 2.

  The main difference I see is that the new lappie has a wifi card 802. 11 g, so that the old lappie 802. 11B. Assembly who works is a new 802.11 g built without thread/router/modem.

  Two other wireless connections are through wireless access points. Connects to broadband via a modem/router and the other via a pc with internet connection sharing active. Both of these connections work with the
  old lappie. At least one of the connections works if I connect via a wired connection.

  The lappie appears to connect to the other 2 networks - it is said that it is connected to the network of xxx and the signal strength is very good, but I get a page not found message when I try to access websites with Firefox. I have
  Verify that the mac address is enabled and that the wep keys are entered correctly is not a problem here.

  I think I have all the properties for the new wireless connection, the same as for the old.

  It is very frustrating carrying 2 round arnut, can someone help me solve the problem please.

  TIA

  Neil

  Hello

  It will be interesting to know if the appliance has INTEL 2200 BG WLAN card. If so, we know that this card hit with some access points.

  Try to install the latest Intel driver http://downloadfinder.intel.com/scripts-df-external/Product_Filter.aspx?ProductID=1637&lang=eng

• T61: cover and non-functioning lights switch problem

  My T61 (type 6465) is coming for three years and has recently developed some minor but annoying flaws. The main problem is that the most reliable laptop will remain suspended: closing the lid does not have to be suspended in the first place and if I use Fn + F4 to suspend, it seems that clutching the back edge of the laptop (that you could do to pick it up and put it in a bag) cause him back on the suspension. Accordingly, I found the cell phone on when you remove it from my backpack, even if I was sure that I had hung before storing.

  The other symptoms, is that some of the green lights have stopped working. Namely, the green lights of power, battery, caps lock num and caps lock seem to have stopped running, but wireless, hard drive and activity to suspend lights continues to work. In addition, the orange battery light works very well.

  Other that the system continues to work perfectly: the battery is still good and maintain the load, the power supply charges the battery and powers the system properly. Power management applications show the correct information about the power status of the system (i.e. on current AC or battery-operated).

  I try to work if this is likely to be a hardware failure or a software problem initially. Has anyone seem to similar symptoms, or may suggest that the problem could be based on my description?

  See you soon,.

  -Mark.

  non-functioning lights is most likely a hardware problem.

• ID/faces of the people in the Sierra pictures, pulling up the non-functional names

  Someone knows how to fix this? Is it a new setting I'm missing? I've already sent feedback to Apple.

  Photos, when I come across a photo of a person without a name, I can click on the field "no name" and a list of names appears. In the Sierra, however, the list includes names of new non-functional based on the e-mail addresses that are causing problems with my library.

  For example, if I type my name, I see three suggestions:

  1. my full name, with the thumbnail associated with my Photos 'face '.

  2. my full name with my email from Apple below address and the photo of my Contacts entry

  3. my full name with a secondary e-mail, which I have also listed in Contacts, with no tile

  If I take 1, everything works as usual.

  If I take 2 or 3, Photos makes a new person with just my name. It does not automatically fill in the rest of my name. I find myself with two entrances of the person, one with my full name and one with my name. I then merge these. This happens with all the people, not just me.

  I have the same problem. When I want to manually add a face without a name/person, I get very often 2 proposals:

  (1) the person sought with the profile photo, the first name and family name. If a picture is displayed, this means that I have already assigned photos to this person.

  (2) the same person, with or without a profile picture, with name, surname and e-mail. This proposal seems to come from my contacts, because it shows the same profile photo and mail the address I have for this person in my contacts.

  If I add the photo to the contact person, the person is added as a person in Photos. But with only the name, not the name, which is a little ridiculous, especially when you are systematically adding people and having many with the same name.

  I merge the two to get back 1 "individual" in photos, with first and last name (first and last).

  So somehow Photos is not capable of matching 'people' in photos to anyone in my contacts list. Even when you merged the two and said Photos this way they need to be put in correspondence.

• Non-functional graphics controller

  Hi, my computer does not start all I get is a white screen, but apparently the caps and the num lights flash a code including mine don't. I get 4 blinks which, according to the site Web of hp is a non-functional graphics controller. No one knows what might be the cause or has had this problem. I really just used to change without having to use through Hp.

  Any help appreciated

  Thank you

  Follow the instructions to the HP support document. to prepare your laptop for shipping.

• Bookmarks completely non functional even after reinstalling Firefox.

  Once more bookmarks became completely non-functional. I tried all the solutions mentioned in the Support site and nothing works. I tried to use Windows restore to a date before the problem occurred. I even tried uninstalling completely and reinstalling Firefox and the problem persists, do not display the same default bookmarks. Import from Internet Explorer does not work even though Firefox says it has. Can anyone provide an answer or I'll have to go back to the use of Internet Explorer which I didn't for years.

  Try a new profile.
  
  http://KB.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows

• Cause of Smartphones Blackberry Desktop 6.0 blackBerry Roxio Creator 2009 to become non-functional

  Dear RIM,

  It seems that for your BB Desktop software to be as functional as we would both, you have integrated some components that cause my Roxio Creator 2009 Suite to become completely non-functional.

  If I uninstall your software and repair the following Roxio, it works well again.

  Reinstall your software breaks the suite Roxio once again, and a repair/reinstall of the suite so that your software is installed cannot be place that Roxio is most recognized as being installed properly or he sees components that prevent the installation happen.

  I tried to uninstall BB Desktop 6, fix Roxio and then return to BB Desktop 5, but after the installation of BB Desktop 6 my ability to synchronize my device (contacts, calendar, Notepad, etc) fails systematically.

  I wouldn't mind, except for the fact that my paid software is ineffective by your free software and the only potential ways that they coexist are for me to purchase and upgrade my Roxio suite.

  I do not expect you to solve my situation, I don't think you can really, but rather I am you advise potential problems that you may want to inform other people who download the software which can have situations similar to mine.

  Thanks for a great, if sometimes frustrating, range of products.

  Trevor Chapman

  Brampton, ON

  p.s. It's rather remote of you to not allow a method for me to send to you directly, but rather use this forum for 'voice' my concerns. Can't really call this committed customer service.

  Hi Ratenef,

  Sorry to hear that you have some difficulties with the BlackBerry Desktop Software. I would recommend the rest of this article and do a clean uninstall of BlackBerry Desktop software and then reinstall the version you prefer. http://bbry.lv/aZw0Yn

  Thank you

• Change to black in the color wall paper and the non-functional start button

  Hi, I am user of ASUS A43E (32-bit, Windows 7 ultimate).
  I can connect to my laptop but the paper change of wall to black in color and all files and programs cannot be opened or click in (just the program of task bar appear n the wall is empty).
  I try many ways already (do not click on, keyboard cannot control, just the mouse arrow can move. same star is also no function)
  that can make some of my important files in this mobile

  Thank you

  Hello

  -Don't you make changes to the computer before this problem?

  Follow these methods.

  Method 1.

  Last good known Configuration is a Windows startup option that uses the most recent system settings that worked correctly.

  Using the last good known Configuration: http://windows.microsoft.com/en-in/windows7/using-last-known-good-configuration

  Method 2.

  If the 1^st method does not help, then try the system restore from safe mode which is in the advanced boot options. The Advanced Boot Options screen lets you start Windows in advanced troubleshooting mode.

  Advanced boot (including safe mode) options: http://windows.microsoft.com/en-in/windows7/advanced-startup-options-including-safe-mode

  You can use the restore points for Windows 7 to return to a previous state, when your computer was working properly.

  System Restore: http://windows.microsoft.com/en-us/windows7/products/features/system-restore

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Method 3.

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft security scanner: http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Response with the State of the question and we will be happy to offer you our help.

• When I opened a second browser window, I get error messages and a non-functional browser window.

  Messages are: ' Exc in ev handl: TypeError: brw is not defined "in a small window labeled" [JavaScript Application] and, after clicking on "OK" in this window, a browser window opens with none of my recorded options with the following: "bitsMarkingCollection.init (): TypeError: this.gBrowser.browsers [i] is undefined" an error box marked "Wired-Marker". " When you click OK, the new window does not work correctly

  If I open a third window, while the other remains open, there is no problem.

  Try Firefox SafeMode to see how it works there.
  
  A way of solving problems, which disables most of the modules.
  
  (If you use it, switch to the default theme).

  • You can open the Firefox 4, 5, 6, 7 SafeMode pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  Do not choose anything at the moment, just use 'continue in safe mode.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox SafeMode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

• Satellite A300 and Vista 64-bit - unknown and non-functional devices

  I have the Satellite A300-1Gn
  Here are some features:

  Technology
  type: technology Intel® Centrino® 2 processor with processor Intel® Core 2 Duo P8400, clock speed of the Intel® PM45 Express and Intel® WiFi Link 5100 chipset: 2.26 GHzFront Side Bus: 1066 MHz2nd level cache: 3 MB
  
  Operating system
  GenuineWindows Vista® Home Premium 32 - bit Edition (pre-installed, Toshiba-HDD recovery)

  
  
  System memory
  standard: 3 072 (2 048 + 1 024) MB
  maximum extension: 8 192 MBtechnology: DDR2 RAM (800 MHz)
  
  Hard drive
  capacity: 320 GB
  Certification: S.M.A.R.T. disc rotation: 5 400 rpm
  
  DVD Super Multi (Double Layer) drive
  Compatibility: CD-ROM, CD - R, CD - RW, DVD-ROM, DVD-R, DVD + R, DVD + R (DL), a DVD-R (DL), DVD - RW, DVD + RW, DVD-RAM
  Maximum speed: read: 24 x CD-ROM, 8 x DVD-ROM / write: 24 x CD - R, 4 x
  CD - RW, 10 x CD - RW, 16 x CD - RW, DVD-R 8 x, 6 x DVD-R (Double Layer), the HS
  6 x DVD - RW, 8 x DVD + R, DVD + R 6 x (dual layer), 8 x 5 x DVD-RAM, DVD + RW
  type: DVD Super Multi (Double Layer) drive
  
  Display
  "size: 15.4"
  type: Toshiba TruBrite® WXGA + TFT high brightness display resolution internal: 1 400 x 900
  
  Graphic adapter
  Manufacturer: ATI
  type: ATI Mobility Radeon™ HD 3650 supporting HyperMemory™ technology memory amount: 512 MB dedicated VRAM (up to a total of 2 302 MB available)
  graphics memory using HyperMemory™ with 4 GB of system memory technology)
  memory type: GDDR2 video (500 MHz) bus RAM (resp. RAM video and system memory combined) connected: 16 x PCI Express...

  I installed windows vista 64-bit to try it, and I started to download all the drivers I could find from Toshiba site... But I still have in my device under 'other devices' management 3xbase system of the device (who report that they do not work) and an unknown device "it works ok same woithout this, but my HD movies are restless...
  Is it posible to thath I missed something... Bluetooth, wireless, sound, games, camera, mic, etc., everything works...

  Thanks in advance guys (or girls);...

  Hello

  Have you installed the right graphics card driver?
  The Sat A300-1GN belongs to the PSAGCE series.
  I checked the page of the Toshiba driver and there are two pilots;
  I think that you should choose the ATI driver 8.477 display because this driver supports the Mobility Radeon HD 34xx/36xx chips.

  Other base system devices could be Bridge Media slot (for SD cards), touchpad, HDMI Control Manager.

  I didn't find these drivers 64-bit on Toshiba page. Maybe you should choose some drivers for Vista 32 bit

• My pc DVD drives non-functional drive

  In it these last daysas my my pc dvd player has stopped working and it appears that the hp DVD-RAM UBBI SATA CD-ROM drive is missing and I tried everyth ing to reinstall disk you required, but nothing works, please help

  Hello:

  Please read the info at the link below.

  Normally one of the resolution - 2, 3 or 5 steps solves the problem.

  http://support.Microsoft.com/kb/314060

  If none of the steps in the article for you work then unfortunately I do not have any other suggestions that you can try.

• A second non-functional progress bar is always visible on the status bar, how do I get rid of him?

  The second bar is inside the handle of resizing on the right side of the status bar. It does nothing, but takes place. The functional progress bar appears only when it is used inside Panel outside panel of authentication on the left side of the status bar and message. I turned the status bar and turn on again - no luck. I also tried to disable all the modules - no luck. I also changed the themes - no luck. I have to re - install the browser?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).

  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.

  You can use "Disable all add-ons" window the startup of Firefox to solve the issues in Safe Mode to disable all extensions.

  You will need to close and restart Firefox after each change via "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

  If you have many extensions then you first activate half test extensions that half the problem.

  Continue to divide the bad half that still has the question until you find that one is causing it.

• display non-functional ati2dvag - Satellite 1900 driver

  Hello everyone: Please help me. When I try to use Windows Media Player, I have no functional error ati2dvag display driver. Everything is distorted and I need to reboot, but the problem persits trying to use WMP. I have a portable Satellite 1900, XP Home SP2 and the display driver's MOBILITY M6.

  Anyone, anyone who knows about which driver replaces MOBILITY M6? I want to be sure one to use. OR anyome knows how to solve my problem?

  Thank you very much!

  Hello

  Maybe the error due to the installed Windows XP with SP2?
  It will happen if you are using the operating system of the Toshiba recover CD?

  I put t know what graphics card you have, but try to use the drivers omega graphics.

• HP 15-p036tx non-visible wireless adapter

  I bought a new HP 15-p036tx and installed a windows 8. The wireless card was not visible in network adapters. I tried to install all the drivers of network, but the Broadcom drivers are give and error and exit.

  Please provide me with the details of the map used in this laptop wireless.

  I've updated to windows 8.1, his work.

• Can the utility Airport automatically adjust a mobile wireless network to a non roaming wireless network?

  Greetings,

  I have expanded my wireless Ethernet (network roaming) cable network.

  The Time Machine (primary base station) and the Airport Extreme (base station #2) lights is green and two base stations work properly when played back via the AirPort Utility.

  I disconnected the cable Cat5 LAN of the time Machine (happening at the WAN on the Airport Extreme connection) assuming that the go-ahead would begin orange flashing on the Airport Extreme.  He did not.  Everything always worked as far as I could tell.  If I had the cable connected or not, everything worked again 'normal' as it should as far as I could tell.

  So here's my question: by disconnecting the ethernet cable from the Airport Extreme, does mean that automatically toggled Airport Airport Extreme for a network utility not travelling?  In other words, rather than extend the network via ethernet, wireless network is expanded wireless?

  What Miss me?

  Return to the configuration with the Ethernet cable connected to AirPort Extreme

  Open AirPort Utility, click on the AirPort Extreme, then click on modify in the window that appears

  Click on the Wireless tab at the top of the screen

  Check the current setting of the network Mode

  He must "create a wireless network.

  Is it?

  If this is not the case, the AirPort Extreme has never configured for a roaming set up in the first place.