Similar Questions

• Satellite A60 - USB ports are not really high speed

  Hello
  It seems to me that the SATELLITE A60-197ITA USB ports aren't really high speed. They are very slow!
  Some diagnose program says that the BIOS supports USB Legacy...

  What is the problem?
  What can I do to have the best performance?

  Hello

  I put t know what external device you use, but in my view it is also the external device power function.

  Legacy support can be enabled in the HW of Toshiba installation tool. You can find it under control panel.

  Good bye

• Working with USB high speed Interface Modul 2.7 in LabVIEW

  Hello

  is there an example works with a USB high speed Interface Modul 2.7 in LabVIEW?

  The EGG is a "Cypress CY7C68013A-56PVXC»

  Thank you

  Best regards, patrick

  Hi patrick,

  I searched on google for the module. The manufacturer is Braintechnology.
  If you need a LabVIEW driver ask them please, maybe it's that they can provide you with a.

  Braintechnology offers a DLL - USB. With a little work, you can include this dll in your LabVIEW project (call library function node).

  The following documents explain how to:

  Integration of external Code with the Shared Library Import Wizard (requires a corresponding header dll)
  http://zone.NI.com/DevZone/CDA/tut/p/ID/2818

  Writing Win32 dynamic link (dll) libraries and qualifying of LabVIEW
  http://zone.NI.com/DevZone/CDA/tut/p/ID/4877

  Example: Passing a variety of Data Types in the DLL for LabVIEW
  http://zone.NI.com/DevZone/CDA/EPD/p/ID/1288

  Kind regards
  N. Ralf
  NIG.

• If you use up your data at high speed can still download apps?

  * O.T. > account Microsoft Family

  If you use up your data at high speed can still download apps?

  You can, just slower (whatever the speed your Internet company service provider provides).

• Portege R930 - 1 d 0 + Replicator port dual monitor supported high speed II - taken

  Hello

  Crossing a Portege R930 - 1 d 0 high speed port replicatior II.
  Is it possible to dual-display output?

  Thank you

  You hear the internal + external display by the dual display or you mean two external monitors?
  Speed Hi II port replicator supports the RGB port and display port and HDMI port but (display port and HDMI) can not be used simultaneously.

  You can use the internal s for computer laptop HDMI port and for example a the Hi speed port replicator II ports to connect an external monitor.

• WiFi Internet high speed why isn't the Comcast speed charge me for? How can I increase my speed subscribed?

  Why my wifi internet speed usually only 6 Mbps when the service that I pay is supposed to be 20mbps high-speed through Comcast/Xfinity, and what I can do to fix this?

  Any suggestions for alternative ISPS for Olympia, Wa this offer affordable quslity connection; s?

  \

  It is a question for Comcast/Xfinity.

  If you are looking for another ISP, Google for them.

• Port Replicator III + very high CPU when you move the usb mouse only in W2k

  Tecra M2 with a port replicator III +.

  It is set to dual boot XP and Windows 2000 (yes I know it is well a bit but I have a bunch of stuff installed in win2k it is difficult to find these days).

  XP is very good at 100%, but with win 2000 if I use my * USB mouse * on the * ports port replicator and waggle the mouse around - the * CPU * jumps from 0 to * 70 + % * use (System process that seems indicatates like IRQ problem). If I plug the mouse into the ports of the laptop (when the laptop is connected) - it's fine, no more than 5% cpu usage. It's a microsoft basic mouse. I really believe that this is a problem of usb any, because the cpu jumps a little if I type quickly on my usb keyboard (only a few %). It comes with the usb ports on all the Replicator.

  Any ideas? I don't really want to plug my mouse in the morning because it beats a little interest to have a docking station in the first place! I have installed mobile extensions. All other aspects of the replicator are fine

  Martin

  Huh it will not be easy to find the right explanation for this.
  At the moment when Tecra M2 has been offered on the market as Replicator port compatible Toshiba offered Toshiba Advanced Port Replicator III (no +) and at that time both supported in operating system has been tested with it.

  Toshiba later designed Toshiba Advanced Port Replicator III + and confirmed the compatibility with Tecra M2, but obviously with more recent WXP (at this time).
  So now, you've been following situation: you use most recent Replicator port, but with much older operating system so I assume that there may be a compatibility issue with W2K.

  I can't imagine use you so often with W2K and if so, may not be so problematic to connect the mouse directly on the cell s USB port.

  Sorry, but I don't think that there is nothing you can do about it.

• COM/LPT ports on Satellite A10 lost and can't use the modem

  My Satellite A10 lost ports, and I can't use my modem.
  What can I do?

  Hello

  I think you should remove the modem from Device Manager. Restart the machine and the operating system should recognize the modem again. Then you can reinstall the modem driver.
  All this should be done automatically and you need t to add all ports.
  The properties must be enabled if you have administrator rights.

  Thanks and good luck

• Ports high speed USB Equium A100

  I installed a webcam Advent (before exchanging it for a better creative). Part of the installation process involves installing a Microsoft's USB controller. (OS is Windows XP Home Edition). I uninstalled the ADVENT software when I got back to the webcam.

  Since then, I started getting messages every time I plug a USB device, on a device high-speed, requiring a port high speed.

  When I look in Device Manager, I have two sets of Bus USB controllers:

  One includes 2 standard OpenHCD USB host controllers, 2 USB, 1 support 2 USB hubs and USB printing composite devices. Their drivers are dated 2001.

  The other includes 1 class PCI USB 2.0 enhanced host controller and USB Root Hub Device 1. Their drivers are dated 2006.

  I have 4 USB ports and all seem to be using the first series of USB controllers. If I disable one of the controllers, then various USB devices stop working.

  As my laptop is only 18 months old, I would have thought that all USB ports are 2.0 version?

  How can I 'forcing' the laptop to use the second set of controllers?

  Hello

  I think that the biggest problem, it is you would waste more time to fix such a driver related issue then just entering the recovery CD and performing a recovery of your entire system.

  Perhaps the fastest way to put little life back to your ports USB 2.0 high-speed. Otherwise, I had suggested to remove all ports from the Device Manager and let windows after a restart re-install all the drivers, but before perform the reboot it would be better to manually remove all THE drivers installed previously.

  Maybe it helps, but if not he would have definitely better to perform the recustomization...

  Concerning

• Message: This device can perform faster if you connect high speed USB

  Hello

  I have a laptop Toshiba Satellite 2009 of Vista.
  I just bought a multimedia design Memup Feel of the disc hard 500 GB.

  My concern is that when I connect to my PC, I have the following message:
  + This device can perform faster. USB devices can be faster if you connect to a USB 2.0 high speed +.
  + To get the list of available ports, click here. +

  Then I have a list of ports in bold, but I don't know what to do with.

  How to solve my problem?

  Thank you

  Hello

  Are you sure that your laptop is Satellite 2009?
  I put t know this model of laptop.

  But I know that this error message; This message appears if you connect a USB 2.0 device to a slower USB port; That is, USB 1.1
  But I think that your laptop supports USB 2.0 ports either TI problem disc external HARD s or the issue of USB drivers
  Try updating the chipset driver you can also delete all the USB controllers and hubs in Device Manager ports. Restart the unit. After restarting again the OS would recognize all USB ports.
  Then try to reconnect the USB HDD

• HP dx2000MT: why fan runs on high speed

  Hello, the fan in this machine works sometimes at high speed, can someone tell me why or what I can do to stop this please?

  The most common cause of a computer running at max speed fan is a processor overheating.

  This can be caused by:

  -Extended heavy load on the processor.

  -Malware can cause this.

  -If you use many programs at the same time as background tasks, who will do as well.

  -Dirty/dusty in the computer heat sinks.

  -Malfunctioning components from the motherboard.

  -Bad placement of the computer.

  -Desktop computers should be placed where they receive lots of air circulation.

  -They should also be placed away from heater vents / air conditioning floor. AC vents may be tempting to cool the machine but will cause condensation and destroy it.

  -Observe the fresh air intakes where on the computer. Generally low and/or front of the chassis. If there is a substantive contribution, move the unit out of the carpet and on a hard surface.

  -Do not keep the Tower in a small enclosed space. Computer Cabinet should never have the door closed with the runinng machine.

  -If it was a laptop, you also to maintain it on a soft surface such as beds and prefer to use it on a desk, or on the binder or other similar when surface into the fold.

  -Vista-era of HP computers are completely garbage as well. (Sorry HP, but it's true). Watch by substituting a newer computer. The new HP machines are not nearly as terrible as those made when Vista was released.

  -Hydranix

• Fault tolerance of CAN 'high speed '.

  There is a lot of information on "Low Speed CAN" being "Fault tolérant."  In other words, every time CAN - H or CAN - L is shorted to either on the ground or + 12v, the other non-court-circuit CAN online will continue to work, but with the problems of timing and reduced immunity to noise.  But there is an absolute lack of information on the high-speed CAN fault tolerance (i.e., 125 kb/s speeds).  And if one wants to face that at high speed is as Fault Tolerant as SLOW, why then isn't high speed MAY also deemed "Fault Tolerant"?

  Can someone point me to an ISO document or other official document that specifically speaks to about high-speed CAN and what happens when lines CAN be is shorted to ground or + 12v?  I need a 'official' source of information on this subject, not only his own personal experience or hear - say.

  Thank you.

  ISO 11898-2: 2003 should be a good source for an official response

  http://www.ISO.org/ISO/catalogue_detail.htm?CSNUMBER=33423

• T3i sync high speed with popup flash?

  When shooting outdoors with a light background, it would be nice to be able to use the flash pop-up as a fill light (to the shadows on a face, etc..). However, the shutter speed is set to 1/200 when the popup flash is in place, overexpose the scene. Is there a reason why the pop-up flash can't sync high speed like an external flash to allow a faster shutter speed and always get a filling?

  Thank you

  David

  It has to do with the amount of energy is available for the flash.  A more powerful flash can more easily manage the sync high speed.

  Sync and sync high speed are related to the work the Shutter curtain on any SLR digital.  There are two doors.  A slides open, and close other slides.  The reason for which there must be two doors (instead of one) is because that if there is only one, then the door would slide open, then reverses to slide.

  Assume the following scenario were true:

  Suppose it takes the shutter a full 1 second door to slide open.  If we set an exposure time of 2 seconds, the following should happen if there was only one door.

  -l' shutter starts to slide open from left to right, allowing light to reach the pixels on the left edge of the sensor.  The right edge is always in the dark.

  -as slides of doors, more and more pixels are eposed to light.

  -a second later reached the opposite end and all the pixels are exposed to light, but the door must immediately reverse and start close because it will take a full second to slide the door closed.

  -the door begins to move and immediately the pixels on the edge of most on the right are in the dark, because they are covered by the shutter, but the pixels on the left edge are still exposed to the light.

  -the door has finally reached the edge against a second later and no pixel is exposed to light.

  Think to what just happened... the pixels on the edge of 'left' of the sensor got a second exhibition 2... but the pixels on the right edge of the probe were barely exposed for a fraction of a second.  You'd have a horrible blow to look.

  To resolve this problem, the camera uses TWO doors... begins a sliding open... the other follows a moment later (based on the selected shutter speed) and starts sliding closed.  Now, all pixels are exposed for the same period of time, regardless of the shutter speed you use.

  But the reality is they are mechanically sliding doors and it takes time to move.  Flash sync speed is shortest possible exposure that can be turned where the first door has enough time to COMPLETELY slide open so that when the flash goes off, the entire sensor is exposed and benefit of lightning.  The second door can slide THEN closed.

  If you do not use flash and you set a very fast shutter speed (say 1/1000th) the second door actually starts closeing long before the end of the first door opening.  In fact the second door is "hunting" the first establishes a "slot" which sweeps the sensor.

  With this in mind... now think just what a flash how to predict sync high speed.

  Assume that your camera has a maximum speed of flash-sync of 1/200th, but you want to shoot at 1/400th.

  This means that the first door must begin to open.  When he reached the midpoint, the flash must trigger to light the subject - but half the sensor did not lightning.  The second door closes as the first door continues to open up.  When the first door reaches the opposite edge, the second door will now be in the middle.  The flash needs to fire AGAIN - this time to expose the pixels on the 2nd half of the sensor.

  This means that the flash should fire TWICE in quick succession and the impulses must be PRECISELY 1/800th second (half or your second 1/400th total exposure times) apartment.    No flash would be able to recycle in just 1/800th dry if she gave a burst of the power of the light.  In other words, that it must reserve at least half of its power for the second round.

  If you increase the shutter speed to 1/800th... now the flash to trigger FOUR times and no single burst may be stronger than 25% of the power of lightning - and gusts must precisely timed occurs 1/1600e seconds, independently of the other.

  You can quickly see how this is going to require a flash with a power or you won't be able to finish the sync high speed on something more than just a few feet.

  For the light of day, the most brilliant exhibition is going to be the sunny 16 rule... f/16 with the shutter speed, the value in contrast to ISO.  So, for 100 ISO, you can use 1/100th sec.  To f/8, you can use 1/200th (and now you are still below the max flash sync speed).

• High speed CD

  I have Windows XP, home edition.  Problem, high speed CD does not work on my computer.  I have sp3 (latest service pack as far as I know).  Y at - there an update I can download to run high speed CD?

  The reason why I asked is I thought it may be a new download to facilitate high speed CD.  If you haven't noticed the standard speed CD is best-selling.  I don't know that I'm not the only owner of the more Windows XP, home edition.   Thank you for your response.

  Hmm, standard speed CD is indeed sold.

• Connection to NOR 9862

  Hey guys,.

  I have problems connecting to my high-speed/FD 9862 NI NI - XNET CAN module.

  I use the 9134 cDAQ chassis, which is compatible with the NI 9862 listed such in the view section of the module CAN set.

  The chassis works very well and is shown in MAX and Device Manager.

  On the other hand, the CAN module is not listed in the Device Manager or MAX and is not detected as interface when I try to create a Session XNET.

  I already checked the forums for the most common errors, but could not find anything that asked my setup, so here's what I have so far:

  My module is plugged into the chassis and hung my frequency inverter, with whom I want to communicate via CAN.

  It is also supplied with a 24 v external supply.

  The essential software that is installed is NOR-DAQmx 15.0.0 NOR-XNET 14.5 and NOR-XNET LENGTH 14.5.

  Thanks in advance for any help!

  Hello

  could you post a screenshot of the message? Do you have the MAX database reset?

  What is the process to reset the database to the MAX? -National Instruments
  http://digital.NI.com/public.nsf/allkb/2C7480E856987FFF862573AE005AB0D9

  For LEDs, see page XNET Hardware and software manual 63:

  NOR-XNET Hardware and manual software - National Instruments
  http://www.NI.com/PDF/manuals/372840h.PDF