Satellite A60 - USB ports are not really high speed

Similar Questions

• I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  Wake the computer to your Apple store or Apple authorized service for the service provider. He probably suffered a hardware failure.

• Vista - usb ports are not recognized unknown device

  Vista - usb ports are not recognized unknown device. any usb device it appears unknown. all worked a few days hardly, but after that I connected my Kodak camera - which does not, now, nothing works. Any help would be appreciated.

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  Try to connect USB devices to a different USB port and check if you are able to access.

  Method 2:

  Click on the link below to run Fix it which will help you to solve the problem.

  Tips for solving problems of USB devices

  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx

  Click on the link below and install the update.

  Rollup cumulative update for USB in Windows Vista Basic components

  http://support.Microsoft.com/kb/941600

  Try to connect the camcorder to the other USB port and on the other computer and see if the problem is resolved.

  Method 3:

  Let us try to disable the Antivirus security software and check the number.

  Re-enable the security software after checking the issue.

  You can also try disabling the firewall and check the issue.

  Re-enable the firewall after checking the issue.

  Method 4:

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot

  Step 2: Enable half the services

  Step 3: Determine whether the problem returns

  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns

  Step 6: Resolve the problem

  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode.

  Uninstall or update the program that is causing the problem.

  Check whether the problem is resolved.

  You can also check out the link below.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/6be4581d-8fbd-407F-815E-b475c35ca586

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• My usb ports are not recognized usb storage damage

  Original title: why is my labtop port shows usb not recognized by vista home basic even though it shows a device installed and ready to use software?

  My usb ports are not recognized usb storage damage

  Hello

  · Do you think any yellow exclamation point inDevice Manager under USB devices?

  Windows vista contains several troubleshooting programs can automatically fix some common problems with your computer. One of them is the hardware and peripheral troubleshooting tool. I suggest you to run the troubleshooter as the first step in troubleshooting.

  Method 1:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2: Remove and reinstall USB controllers

  a. Click Start; in the start search type devmgmt.msc and press ENTER.

  b. expand Bus USB controllers.

  c. right-click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  d. restart the computer, and then Windows will reinstall the USB controllers.

  e. plug the removable USB storage device and test to make sure that

• Equium A60: USB Port does not work properly

  Hello

  I recently bought an external hard drive and every time that I plug it into a USB port it says

  'A trendy High - Speed USB device on a non-high speed USB hub'

  I guess I need to download a host controller driver, but I can't seem to find one not where does on have an idea what I can do.

  It is an Equium A60

  No info would be appreciated cheers

  Hello, SK

  I found an interesting technology high speed USB article.
  Please take a look at this site:

  http://www.Microsoft.com/windowsxp/using/networking/learnmore/jones_02august05.mspx

  Good bye

• USB ports are not available

  My host is a laptop Toshiba with Ws 7. The USB ports are fully operational. However, with the players that they are not. for example, XHDD is not on the desktop "XP".

  What to do so I can make use of the USB ports?

  Hi Redoak716,

  You just need to add a USB controller to the hardware of your virtual machine configuration. Make sure VMware tools are installed and running in the comments.

  Once your virtual machine is in place and your USB drive connected to the host, attach it to the guest using the control panel of devices on the lower right part of the screen of the console. It will be detached from the host that it cannot be used by the two systems at the same time.

  It will be useful.

  Concerning

  Franck

• Satellite U400 - two of the three USB ports are not working

  Hello

  I have laptop Satellite U400 who has three USB ports.
  One of these 3 ports does not work correctly and the other two ports do not work.
  Is there anyone to show me any solution?

  Thanks in advance,
  Concerning

  Any solution? You mean a magical solution? :)

  No one knows the configuration of the laptop.
  No one knows what OS you are using.
  Nobody knows what you did last time with your laptop.
  No one knows how long you have this problem.
  No one knows what are the USB devices that you use to test USB functionality.
  What you have already tried to do about it?

  You want to have more questions?
  Maybe you should write more than three short sentences as a description of the problem.

• Satellite 1800: USB Port does not allow the IPod to work

  Hello
  I have a portable Satellite 1800-314
  I bought a new IPod.
  When I connect it to the laptop, it does not work.
  There is a message that says: we need more speed into the USB port and it seems that the port is not the right one for the IPod.

  Do I have to update the Bios as well?

  I need a big help!

  Thank you

  Stef

  Hello

  As far as I know the Satellite 1800-314 uses USB version 1.1.
  It seems that your IPod needs a high performance USB (Version 2.0)
  Unfortunately, the BIOS update help doesn t. You can change t the USB 1.1 to USB 2.0.
  I think that the only way to connect the IPod is to use the PCMCIA card.

  Good bye

• Equium A60 - USB ports do not respond

  Hi guys,.

  Could someone help me please, I got a Toshiba A60 equinum which worked perfectly up until when all the USB ports on the laptop refuses to answer. I tried to bypass the USB by getting a cardbus to be inserted into the pcmcia bus, but still did not respond. I can guess that the chipset may have problem. I'm thinking of the chipset was corrupted software.

  If my guess could be considered nearest, what could you suggsest I wish someone could help profer a solution to this problem.

  Thank you
  Sola

  Hi Sola_2,

  Wait a moment and have a look in Device Manager. Are the USB port which is are listed correctly?
  You should try to remove all the USB ports on the Device Manager, and then restart the laptop. After that the ports will be recognized again.

  Try by also updating the BIOS and chipset driver. Both can be downloaded from the Toshiba site.

• Since the L7680 installation my usb ports are not detected...

  It seems that something in the registry has been changed.  My Western Digital Passport (mass storage device) is not detected is not my SanDisk Micro (2G).  Western Digital will work in the USB from the printer, but don't the SanDisk.  I've lost the use of all of my USB ports on my computer processor and montor.  They used to work before installation.  I uninstalled and reinstalled, I check startup items in MSCONFIG.

  I read on the Microsoft support page which the hkey_local_machine\system\currentControlSet\Control...

  should be set to activate, but I do not have this folder in XP.

  Western Digital does not know what is happening, or not SanDisk.  HP really gave me the run around way to uninstall and reinstall, but I didn't get an answer that solves the problem.

  It seems to me that since it was drivers from HP which caused my other unit to pass unnoticed, HP should be able to tell me how to solve this problem.  I do too much research for a new product.  I know I'm very frustrated, and since this is a new printer I still have time to take it for something that's going to work.  I had a Dell that has worked well, I wanted to just an upgrade.  I guess I could have updated by Dell.

  Just about the evacuation, someone has an idea what the fix is for my USB not detected ports that have been replaced by the reader on this printer?

  I added a new HP printer to my set all my ports no longer works. None of my flash drives or removable hard disks worked. I tried everything and then read "ports must be updated". My computer is older than three years and the ports of origin are 1.1 and are of most new USB 2.0 devices. Long story short, I went to microcenter and bought new ports ($11.00) and add them to my computer. All ports are now functional.

• Satellite C650 USB ports does not work

  Hello

  I have trouble with me laptop C650. USB ports yesterday do not work after you connect USB stick, SD card or some.
  Now I don't know if it's a hardware or software error.
  I tried to restore the system, change the USB drivers, perform the maintenance of PC and check the antivirus, but nothing did not work.

  Laptop computer ads?

  Thank´s for more info...

  Hello

  You can try to refresh the USB ports and the controllers that appear in Device Manager.
  Disconnect all USB devices and go to Device Manager.
  Here, expand USB area controllers.
  Now delete all USB host controllers and hubs root USB in the list.
  After this reboot of the laptop.
  Finally, the Windows operating system should start and should recognise all USB devices once again. Now connect a USB mouse and check if you can use it.

• HP Envy m6 1125dx: USB Ports are not working please help

  Hey all,.

  I had problems with my USB ports on my laptop Hp Envy M6 1125 DX. Only 1 usb port works and the rest do not work. I tried everything to update the BIOS updated the drivers from the site. I don't know if the driver is not installed or if it's just a bad USB port, but I didn't really notice it until recently, when I bought a headset and I couldn't use it as my only working port is used by my mouse.

  In the USB tab in Device Manager, it has the following features;

  Generic USB hub

  Generic USB hub

  Family of chipsets Intel (r) 7 series/C216 USB Enhanced Host Controller - 1E2D

  Family of chipsets Intel (r) 7 series/C216 USB Enhanced Host Controller - 1E26

  Composite USB device

  Composite USB device

  USB root hub

  USB root hub

  None of them have a yellow exclamation point so my best guess would be that is missing the drivers for the rest of the ports, but I have no idea. I'm in for this reason excrutiating pain, I'd appreciate any help.

  Thanks in advance!

  Hello @jgasca23,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I stumbled upon your post on the issue of the USB port and wanted to help!

  First of all, try to review the following document and let me know how it goes:

  HP PC - troubleshooting connections USB (Windows, 10, 8)

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Satellite C660 - USB keys are not mounted

  I have a * Satellite C660 with Windows 7 64 bit *. When I conect a USB stick (2 GB LG or other), Windows install the new USB, but after a few seconds, the USB is disassemble and assemble and disassemble some indefinitely.

  With my old * Toshiba Satellite M50, Windows XP * both sticks work very well.

  Hi mkobets,

  Probably something wrong with USB ports or driver chipset so the glue work with your old Toshiba laptop USB

  Means the simplest would update the chipset in my view driver that you can download here:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• Satellite L750D - USB Ports do not work

  Hello

  a couple of days all three of my USB ports stopped working.

  I tried several USB devices and none make their appearance as being connected at all (check start > computer > devices with removable storage).

  The two on the right side of the laptop have never really worked systematically earlier and there again, but the left hand, we worked more or less all the time.

  If anyone can help that would be great
  Thank you

  Hello

  Have you tried to remove and reinstall the USB host controller driver in the past?
  If this isn't it.

  Go to Device Manager and expand the controllers Universal serial bus tree
  Here, the Generic USB hub and the USB universal host controller.
  Delete all of these devices from the list of devices and reboot the laptop.

  Usually once the system has booted, all devices removal must be found and resettled automatically. Wait until the end of this procedure and connect the USB device (ie the USB mouse) to USB port just to check the functionality.

• Satellite pro A60 com port are not not in modem device manager

  Have a new A 60 pro and cannot connect to the internet via the modem.
  The offer of 'solutions' by help needed to make sure com port 1 was turned on, but only a lpt port has been listed.
  XP pro says that the modem works well.
  How to get com port 1?

  David

  Hey there,

  IM afraid that you do not have a hw to port com on the device. Com ports you have on the laptop are "virtual ports. If you're expriencing diffuculties internet connection, could you please go to Device Manager (by going to the system control panel and choose the Hardware tab) and then access the properties of the Toshiba software modem, go to the diagnostics tab and click the query modem button and display the result.

  See you soon,.

  PS you'll only com port listed in Manager of devices if and only if you have a serial port on the computer.