Not always have connectivity LAN on my Satellite A300D

Similar Questions

• Could not establish a connection WLAN on my Satellite P100 - 10 p

  A few days ago, I bought Satellite P100 - 10 p:
  -Model No. PSPAGE-01CO1LG3
  -Serial number: 47069869W that came with Vista Home Premium OS.

  I removed Vista because of some problems of incompatibility with some software. Everything works fine except my wireless. Intel 3945ABG wireless card is and I downloaded the latest drivers as the latest version of the software for that, but I'm still not able to connect to any wireless. I get just message "unable to connect".

  Tried to work only on B, G or B/G, strings changed, he recorded on MAC filters in DHCP server, tried to use the automatic configuration of Windows, but still not get any results. Please help me with this problem. I would be very grateful.

  Wireless routers on which I tried to open a session were: SIEMENS SE555 and DLINK DSL G684T.

  Help, please.

  If WLAN is visible for P100 I recommend you reboot the router and try to establish a WLAN connection again. It helped for me several times with Vista preinstalled A200.

  If your WIFI is safe make sure you only use the right password for wireless LAN.

• Could not set the connection Wi - Fi on Satellite click mini L9W

  I just news click on mini L9W
  WiFi connection was created without difficulty editing - it was later lost during the day, perhaps when the integrated anti virus has been activated
  Re-established connection using Windows network & sharing Center - connection maintained until closing down

  next day - impossible to establish connection - "no network found.
  tried troubleshooting without success, even if it worked yesterday-feeling tired & sick - I know, it must be something basic but I'm not in the mood for this

  lap - top & table works fine on the same Wi - Fi system,

  This is my first experience with Windows 8 and Tablet

  Help

  Have you been able to establish the WiFi connection using the new unit click on Mini L9W?

  Feedback would be appreciated.

• My clips do not always have an "end of Clip icon"... is there a reason for this?

  

  

  I'm sure I did this experiment with video clips too, but in my current project I only see with audio clips.

  This is usually the result of the audio track a whole little longer than the video track - unless the length of an image. Keep in mind that the audio and video use different time bases: video use frames, typically 24-60/second, and audio while using samples, most commonly 44 100 or 48 000 per second. When the end of an audio stream falls between frame re - and the timeline works in frames - Premiere Pro adjusts the closest sound to the full frame. Thus, the end of the Clip indicator is not displayed.

  If you pass the timeline to display units of Audio time (via the Panel flyout menu), then you can cut the track element out until the end of the clip

• Re: Satellite A300D - strange keyboard problem

  Hello!

  I have a problem with my Satellite A300D: when I press on 'y' or '5', I get a "y5" and when I press "n" or "b", I get a "nb".
  If I hold down y or 5, it seems y5yyy... and with n and b I get nbnnn...

  What you think could be the problem? Keyboard? Or some other hardware controller?

  Thanks in advance.

  Hello

  It is difficult to say why this happens, but in your case I would like to connect an external keyboard and check this. You may notice the same behavior?

  If not, I think the case is clear: your keyboard internal doesn t work properly and you need a new. Therefore, you can contact a service provider authorized in your country.

  By the way: have you checked the keyboard input language?

• Satellite A300D - 21 d - artifacts in games

  Hello

  I have a problem whit my Satellite A300D - 21(d), every time when I start a game after the appearance of some objects in minutes. I don't know why. I installed the most recent driver and installed HWMonitor to see the temp of my card, and it is never higher than 75 C. What should I do?

  My specs:
  Turion x 2 Ultra ZM82 AMD
  ATI HD3650 512 MB
  4 GB OF RAM
  Windows 7 Professional

  Hello

  > I have a problem whit my satellite A300 - 21(d), every time when I start a game after only a few artifact minutes appeared.

  AFAIK, art objects are caused by overheating of the graphics card, I recommend:

  1 clean the cooling system http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=46
  2. set, high performance, in the management of power supply, maximum cooling method

  I'm not a gamer, but change the resolution in the game, you have already installed the latest driver...

• Connectivity LAN on Satellite L20-205 works sometimes and sometimes not

  Hello

  Well im using ethernet to connect to internet. The thing is, sometimes it works, sometimes not. There are times when I can connect immediately after that I turned on the laptop, there are moments where the connection becomes available after 10 minutes of operation of the laptop, sometimes it doesn't quite work.

  However, sometimes the connection could freeze even after running for some time. Actually, its kind of voodoo magic connection to the net via this phone. It is said that the cable is connected, but there is 0 packets. It frustrates some me... so I'm wondering if anyone has come across a similar behaviour of his satellites?

  Hello

  On this path, it is not easy to say why this is happening. Good and stable connectivity LAN depends on a few different factors. You must know that this laptop can not only peripheral being responsible for this. I put t know what LAN you use (probably DSL at home), but you must also check if the ADSL modem or router is configured correctly.

  If you are free, try to connect to your laptop to some other LAN to check how it works on an independent network. I really can't imagine that LAN card or driver may be responsible for this.

  I use at home of DSL connectivity and if the router is without power for a while, it can takes about 10 minutes before I can use an Internet connection.

• Why my internet continue to say that the internet does not not and takes so long to connect, I have a new computer, I have also a pc clean and do not always help. any suggestions

  Why my internet continue to say that the internet does not not and takes so long to connect, I have a new computer, I have also a pc clean and do not always help. any suggestions

  Hello

  Thanks for posting your question in the Microsoft community.

  I understand that when you try to connect to the Internet, he says at the outset that Internet is not responding and then after some time to connect. Let us know if this is incorrect.

  It would help if you could answer these questions.

  a. what version of Windows is installed on the computer?

  b. don't you make changes to the computer before the show?

  I suggest you check out the link and follow the steps.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-GB/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know if you need more assistance.

• After you have uninstalled McAfee, my Wifi does not work (only works LAN connection)

  After you have uninstalled McAfee, my Wifi does not work (only works LAN connection). Troubleshooting message is "windows could automatically bind the ip Protocol to the ip stack.

  New Aspire E11, Windows 8.1

  Help, please.

  Here is how I fixed it:

  Go to control panel > network and Internet > network sharing Center

  Click on "Change adapter settings" in the left pane.

  Right click on your map. Select "Properties".

  There will be a box titled "this connection uses the following items."

  Uncheck anything that looks like it was installed by a third party (AVG, Avast, ZoneAlarm). In my case, the culprit was 'HTC NDIS Protocol Driver", who was installed by the software of my phone (HTC). Because it's not obvious what to uncheck, here is what I currently have checked in my system of work which should not cause a problem:

  KEEP THESE CHECKED:

  Client for Microsoft networks
  QoS Packet Scheduler
  File and Printer Sharing
  IP v6
  Internet Protocol v4
  Driver Link-Layer Topology Discovery map IO
  Link-Layer Topology Discovery recall

  Uncheck everything else.

  Go to network and sharing, disable and re-enable the adapter.

• Satellite L650-11R - not able to connect to public networks

  Hello.

  Although I am very satisfied with my laptop, I have a problem. I am not able to connect to public networks using ethernet cable to some location (not everywhere) with different laptops users have no problem connecting to networks of same that I can't, so I think that the problem is my laptop.

  I always get the error 'unidentified network '. I tried to replace the cable but the problem still remains.

  Any suggestions?

  It is not easy to tell what the problem may be, but it is certainly related to the firewall and network settings. Try to disable the firewall and check the connectivity.

  Try to compare the LAN settings with others who use the same operating system.

• Satellite 1800-504, doesn't have a LAN port

  I have a friend who has a Satellite 1800-504 he bought 5 years ago. Now, he bought an ADSL modem, what he wants to connect to the computer. The problem is that when the connection (ethernet) is supposed to adapt is closed. I've never seen anything like this and I'm wondering if anyone knows what it is? Is it not possible to connect to this computer to a network (ADSL modem)? or what we can do about it?

  We live in Sweden, hope someone has the answer to my question, so I would be very happy.

  Hello

  I saw several times on the Toshiba notebooks. LAN port on this good old classic is not available, but the solution is LAN PCMCIA card.

• 2000-2314TU HP: not able to connect to the LAN and Wireless network

  Hello

  I have a HP laptop and it had Windows 8 is installed. It was very slow so I installed windows 7. After the downgrade, I am not able to connect to LAn or wireless n/w. I think that there are some missing drivers. Can anyone please suggest what drivers should I use?

  You are the very welcome.

• Satellite A105-4114 will not recognize the connection to the local network

  Whenever I plug my cable ethernet to ethernet port on my laptop, the ethernet port does not recognize my cable, even if the lights are flashing. I updated my LAN driver a week ago, and it has not really helped. My internet service is provided by my apartment complex at the school, but I don't think it has anything to do with it, because I had this problem last year living in dorms and at home. I have to restart my computer everytime for my computer to recognize the connection to the local network. Can someone help me please?

  Driver: Intel (r) PRO/1000 PL Network Connection

  Wireless connection works fune.

  Hello

  First of all, you should check your LAN cable.
  Sometimes the laptop may not be correctly connected to the LAN as a result of a defective cable.
  In addition, you should check if the network card is properly recognized in Device Manager. He should t be a yellow exclamation!
  In addition, you must check the settings for the TCP/IP protocol in the LAN card properties.
  TCP/IP must be set to automatic. I assume that you are connected to a server and the server supports supported a range of IP addresses and assigns it automatically.

  Last but not least check if you are using the latest version of the BIOS.

  Welcome them

• Satellite M40-313 (PSM44E) limited or no connectivity LAN wireless

  I have always been connected to our home wireless network and the connection within the House is still ok, but after the restoration of my factory settings I came to only get limited or no connectivity.
  After a problem with my DCOM Server process Launcher I find completely my laptop, not I can recognoise our network but cannot use internet or access files, after a friend recommended I update my Atheros wireless driver I did, but it has not changed anything.

  Is that what I can do to fix this problem without having to pay someone or buy a new laptop?

  Thanks much for any help.

  Karen

  Have you tried to turn turn off the firewall and other security software?

  Also try to use a static IP instead of DHCP and enable file sharing.

• PCMCIA card does not recognize the connection to the local network on Satellite Pro 4340

  Hello world

  I have 2 Satellite Pro 4340, running Win2K, SP4. I bought a card PCMCIA 10 / 100MB of Ultron (more or less no name :-))

  When you insert the card, Win2k recognizes the card, but when the I plug the network cable, it does not recognize the connection. Cable is fine. It seems there is no power on the PCMCIA card. I read on some forums that there is a problem with the Topic100 Card Bus driver and voltage. I see that many people have the problem but not where to find the driver for the problem :-/ I couldn't find a driver on toshiba support site. A

  ll have an idea, or better a link where I can download this driver? Any help is appreciated and thanks in advance for your help, support and answers.
  Corey

  If this card needs a driver you will not find it on the download page of manufacturer of portable. You must check the card producer site.

  As you know in the world of computers, it has set different standards. Produced very often cheap are not designed for these standards, and you can have different problems. I recommend you to use high quality products.