now my USB is protected, it is not recognized in writing

Similar Questions

• USB 2.0 devices are not recognized on Satellite L

  Hello

  All of the usb 2.0 device is not recognized on my laptop.
  I got a message stating that the driver are not installed. I'm looking for the driver on the support site, but could not find them...
  I've updated the bios and chip set utility, but still nothing.

  Any idea?

  Hello

  What model of laptop do you have?
  What operating system do you use?
  Since when you noticed this problem?
  Did you test all USB ports?

  Have you tested with different devices USB ports?

  Please post a little more information.

• USB printer (Canon MF4150) is not recognized. Please help. __

  USB printer (Canon MF4150) is not recognized.  Help, please.
  What I tried:
  remove the printer
  Uninstall and reinstall the printer drivers
  printer plugged into every usb port, all working with other equipment
  plugged the printer with a different usb cable.
  stop, and then turn on the printer.

  Thanks in advance.

  Hello murrcat,

  Thank you for visiting the Microsoft answers community.

  To ensure that the procedure for this particular model is followed during the installation, please take a look at this .pdf of Cannon under the install/uninstall software.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Nighthawk R8500, USB 3.0 Flash drive not recognized USB 3.0 Port, Port of only 2.0

  My Nighthawk R8500 router with the latest firmware, V1.0.2.54_1.0.56, does not recognize my SanDisk Ultra Fit 128 GB USB 3.0 Flash drive when it is connected to the router USB 3.0 Port. The Ultra Fit is formatted in FAT32 and works fine when plugged into USB Port 2.0 router or my laptop.

  At first, I thought maybe USB 3.0 Port on my router wasn't working at all, but it recognizes my SanDisk 16 GB Cruzer USB 2.0 Flash Drive that is also formatted FAT 32. Unfortunately both my laptop have USB 2.0 Ports, so I don't know if the problem is with the router or the Ultra Fit Flash Drive. Everyone knows about this problem of their Flash 3.0 player is not recognized in USB 3.0 Port their router, especially with a SanDisk Ultra Fit? This problem can be resolved through firmware? I'd really like to take full advantage of the speed of USB 3.0 as I like to share files through my router via ReadyShare and ReadyCloud.

  Thanks in advance for any help, Carlos

  Technical support with me. Installation of a updated firmware, V1.0.2.64_1.0.62, which became available shortly after my post, solved the problem. -Carlos

• When I plug my USB in Iget the message not recognized usb device

  I have a storage device removable I store my files in. Yesterday after saving my work, I closed my laptop and removable storage in as well as my mouse to the left. I came back after several hours and tried to open a file that was on removable storage, but it was not listed. In others, I go to my computer and select the removable disk f for example, but he wasn't there. So I unplugged it and donated to the is when I got the message saying: USB device not recognized one of the usb devices has malfunctioned and windowes dose not recognize it. So I put in my laptop to marry and got the same answer. I have no problem with the wireless mouse.

  Hello

  Once removed the HDD data can't be recovered. However, you can use your favorite search engine to browse third-party data recovery software and use this software to recover data.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can also view the following link to recover lost or deleted files and try the steps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/recover-lost-or-deleted-files

  Hope this information is useful.

• Extermal Toshiba USB 320 GB HARD drive not recognized correctly

  My hard drive does not recognize now them itself as a hard drive just an AT2P RC42 Cypress and is now useless after a few months in use.

  I uninstalled and reinstalled by the Device Manager. I then tried on another computer and I have the same problem, so it's the hard drive and not on the computer.

  It's an external drive USB 320 GB toshiba that previously worked fine, but now think its thing and nothing else.

  What can I do to fix this problem? Please help all my data on this drive...

  Hello

  Check it please this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=17412 topic. You will find similar discussions.

• USB 2.0 Bluetooth DEVICE NOT RECOGNIZED - Equium A100-147

  Hi all!!!

  I have posted b4 about my problems of BT, but still no further forward.

  I have a 2.0 usb toggle universl BT, my last worked well until it broke.

  Since I had xp pro installed, but my USB does not recognize my rocking do not even have a pop up? any ideas.

  When I plug it 3 fast Dong

  Unplug and made 2 Dong

  I tried to install the drivers usb, but nothing.

  do my head now... Please someone help me resolve this issue!

  As far I know Equium A100-147 doesn t support the internal BT module and so if it was not equipped with the BT Toshiba stack.

  If you use an external 3rd party module BT, then you should check if there are drivers designed specially for this external BT dongle.

  Also, check if the BT dongle would be recognized in the Device Manager.
  If there is no dongle BT listed in the list of devices, then remove all controllers and hubs of UBS in the list and restart the device.
  After rebooting again Win XP should initialize the USB ports again and then you try to plug the dongle BT again.

  Good luck

• USB camera olympus fe-170 not recognized by windows 7

  Windows 7 will not recognize the Olympus FE-170 digital camera I have loaded down the soft ware and also updated software adobe reader as requested

  Hello

  1. What is the status of the device in Device Manager?
  2. do you get an error message?
  3A this works much earlier?

  Follow these methods and see if the problem still occurs.
  Method 1: Run the hardware and devices Troubleshooter
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Use Device Manager to search for the hardware changes

  Use Device Manager to find the hardware changes. After your computer search the hardware changes, it can recognize the USB device connected to the USB port so that you can use the device.

  To check the hardware changes, follow these steps:

  a. Click Start, type Manager of devices in the search box of start and press ENTER.
  In Device Manager, click on your computer so that it appears highlighted.
  b. click Action and then click Scan for hardware changes.
  c. check the USB device to see if it works.
  d. restart the computer.

  Method 3:
  
  You can also update your chipset drivers.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Method 4:
  I also suggest you try connecting to the computer or the port of differnet.

• USB SD card reader is not recognized by Windows XP.

  None of the previous posts here helped me. Here, I write again.
  When I plug my SDHC Targus card reader I receive a "USB device" balloon unrecognized in the taskbar.
  So, what are we doing about it? I suspect that the Targus seller should have provided a special driver for that.

  Note that this goes on my IBM laptop and my desktop Dell two very fine model material. Both XP running.

  Thank you
  Mike

  Hello MikeLupo,

  Thank you for your message.  Other USB devices work on your computers?  If so, which can exclude the USB port.  This would lead us to a driver problem.  Your computers are up-to-date on Windows Updates?  Execution of Windows updates can load drivers that may correct this problem.  You can also click HERE and enter your SD card reader model and possibly download a driver.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Wireless USB adapter 3com model # 3CRUSB10075 not recognized by win7

  I connect to the web from my PC using the USB wireless adapter.
  I got a USB wireless adapter, 3Com® OfficeConnect® model product # 3CRUSB10075 Wireless 54 Mbps 11g Compact USB.
  Adapter does not work after that the PC was upgraded to win 7
  Victory cannot regonzie adapter, and I can't access the internet.
  I tried to install the lates 6.3.3.2 driver version, version of the 3.0.0.1x utility - but are not lacking.

  I have not checked on the 3com site any other version of the driver available, and no version to fit with win7 is available.

  Seems I have to go back to XP or buy a new adapter :(

  Anu do knows where to find the driver of fascination?

  If they have a Vista driver, that should work, but if the adapter goes back to the days of XP and no further forward, you will probably need to get something more recent.

• Failure of Windows 8 install, now the Windows 7 product key is not recognized, because it was an upgrade only.

  After several attempts of downloaded installation windows 8, I ended up with a useless and made desktop resettlement using my windows disc 7. Now, the product key for my windows 7 is recognized as a key to upgrade only and does not have to satisfy to MPA.  Where is my satisfaction? I have 30 days to resolve. Either I need a key for my 7, or a facility for my 8. Everything on my end, that I could find online tried. I think this is a Microsoft problem and the solution must come from them.

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• FireWire-usb 2.0 connection "driver not recognized."

  I have a video camera with a firewire connection and I wanted to upload the video via USB, but no luck. Windows 7 does not recognize a driver for a firewire 4 pin to usb 2.0 connection 6-pin. I think that old Bus USB controllers and Ports - OHCI 1394 should do the trick, but not savvy enough to pull the trigger. I'm on the right track? If so, how do I install the cab file?

  Hello

  You receive an error message/code?

  
  Run the process and check if it helps.
   
  Method 1
  Click on the help links and perform the troubleshooting steps.
  Tips for solving problems with USB devices (applies to Windows 7 as well)
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
  My drive does not appear in Windows Explorer
  http://support.Microsoft.com/kb/330140
   
  
  Method 2
  Remove and reinstall all USB controllers
  To remove and reinstall all USB controllers, follow these steps:
  (a) click Start, click run, type sysdm.cpl in the Open box, and then click OK.
  (b) click on the hardware tab.
  (c) click the Device Manager button.
  (d) expand Bus USB controllers.
  (e) right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  (f) restart the computer and reinstall the USB controllers.
  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.
  
  See the link for help:
  Import video from a live DV camera
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-live-video-from-a-DV-camera

  Let us know the status of the issue.

• External USB (NTFS) 2 TB drive not recognized

  Ladies and gentlemen,

  I m a complete beginner of VMWare, who inherited the ESX of my predecessor structure. The server host is installed on Linux and I m accessing it through my virtual Win 2003 Server installation. Hope that I can turn to you with my question:

  I m running an e-mail server on Win2003 and search for backups add a 2 TB external hard drive. I think that I´d be simple add in Win 2003 vm ware config and see the resource in Windows after restart. Of course, this didn t happen.

  I can not even see in available resources. I read some of the similar posts here, and some say that this USB support is not available in ESX Server 3i 3.5.0 and I want to upgrade. Others say it s enough to reconfigure the VMX file to add the USB support. I had a quick glance in the vmware log and he says (see below) that he actually sees, then there might be a glimpse of hope.

  Yes, I have plugged in and out several times in despair :)

  The problem is worse that I cannot access the server host correctly because have no knowledge of Linux and am looking at all this only through the installation of the client Win 2003. So the upgrade to eventuall wouldn be an easy thing as well...

  Can I please ask you to help if West any solution that would solve this? Thank you very much

  

  Infrastructure Client 2.5.0 (build 147633)
  ESX Server 3i 3.5.0 (build 199239)

  Hello

  
  

  The function is not available in 3.x, there is no 4.1.

  
  

  Improve the environment to 4.1 or above, this would help you to use additional features and bug fixes.

  
  

  See you soon,.

  NS

• Any update yet to USB sticks being not recognized?

  I searched for help and found similar problems have yet to see any real solution.  Seems that many face the same problem with key USB cannot be recognized on Windows 7

  Is there any solution yet?  I'm not computer whizzkid so if there is a REAL difficulty (not something dubious Regedit that sounded like he screwed up computers everybodys!) please let me know how to do - it is so frustrating!

  See you soon

  Hello

  Have you checked the player on other computers running Windows 7, Vista or XP?

  Be sure to check forums and with Support of the manufacturer of the Drive, their documentation online.

  It is SanDisk however, these methods can help with other brands of USB keys.

  Cruzer not recognized by the PC
  http://KB.SanDisk.com/app/answers/detail/A_ID/10/kW/Cruzer/r_id/101834

  ===========================================================

  Check with manufacturer's support the system, their drivers and documentation online and ask for their
  Forums (if any) for known issues. Search for updates of BIOS, chipset of low-level drivers and others
  USB drivers on the site of the manufacturer of the system (motherboard for systems custom built manufacturer).

  If a PC remove ALL power and reinstallation of the cards, memory and cables (at both ends where possible)
  -in fact, remove and replace - do not just tight. Remove the dust bunnies and make sure that the ventilation openings
  are clear. For a laptop on everything that can be done is to reinstall the memory and clear the vents.

  If nothing works and it's a PC, you can disable the onboard USB and use a USB add-in card
  is not expensive. Of course for a PC or laptop using a real computer store (one who does in)
  Home service) or system manufacturer support can be requested.

  ============================================================

  Other troubleshooting methods:

  1 reboot to be sure nothing blocks the ports.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - Device Manager - click in the box of white/white - VIEW - show hidden devices

  Look everywhere EXCEPT USB controllers for your device and if find you them (maybe
  plus_d' one of each) under disk drives, you can have several - right CLICK and UNINSTALL
  for all instances

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick the three 1st choice
  to see if one is there. Try to remove all instances and restart then plug the drive.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• iPod nano detected but not recognized, why?

  My wife has an ipod Nano 7 G. We have 10 Windows and iTunes 12.3.3.17. It worked fine for months. But today it has plugged his ipod, and he wiped all the music on the ipod, suffice it to say that she is not happy. She then unplugged, plugged in, and now she is ' ipod detected, but is not recognized.

  I uninstalled / reinstalled iTunes. I followed the process to update the driver. But it still does not work. What else can I do to make it work again. In its current form the ipod (just a few months) is essentially useless.

  If you have already tried to uninstall iTunes, you are probably not completely remove iTunes and software components.  This Apple document lists the components of the installation of iTunes and the precise order to uninstall

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

  Then, reinstall the latest version if iTunes

  https://www.Apple.com/iTunes/