FireWire-usb 2.0 connection "driver not recognized."

Similar Questions

• Nighthawk R8500, USB 3.0 Flash drive not recognized USB 3.0 Port, Port of only 2.0

  My Nighthawk R8500 router with the latest firmware, V1.0.2.54_1.0.56, does not recognize my SanDisk Ultra Fit 128 GB USB 3.0 Flash drive when it is connected to the router USB 3.0 Port. The Ultra Fit is formatted in FAT32 and works fine when plugged into USB Port 2.0 router or my laptop.

  At first, I thought maybe USB 3.0 Port on my router wasn't working at all, but it recognizes my SanDisk 16 GB Cruzer USB 2.0 Flash Drive that is also formatted FAT 32. Unfortunately both my laptop have USB 2.0 Ports, so I don't know if the problem is with the router or the Ultra Fit Flash Drive. Everyone knows about this problem of their Flash 3.0 player is not recognized in USB 3.0 Port their router, especially with a SanDisk Ultra Fit? This problem can be resolved through firmware? I'd really like to take full advantage of the speed of USB 3.0 as I like to share files through my router via ReadyShare and ReadyCloud.

  Thanks in advance for any help, Carlos

  Technical support with me. Installation of a updated firmware, V1.0.2.64_1.0.62, which became available shortly after my post, solved the problem. -Carlos

• Extermal Toshiba USB 320 GB HARD drive not recognized correctly

  My hard drive does not recognize now them itself as a hard drive just an AT2P RC42 Cypress and is now useless after a few months in use.

  I uninstalled and reinstalled by the Device Manager. I then tried on another computer and I have the same problem, so it's the hard drive and not on the computer.

  It's an external drive USB 320 GB toshiba that previously worked fine, but now think its thing and nothing else.

  What can I do to fix this problem? Please help all my data on this drive...

  Hello

  Check it please this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=17412 topic. You will find similar discussions.

• External USB (NTFS) 2 TB drive not recognized

  Ladies and gentlemen,

  I m a complete beginner of VMWare, who inherited the ESX of my predecessor structure. The server host is installed on Linux and I m accessing it through my virtual Win 2003 Server installation. Hope that I can turn to you with my question:

  I m running an e-mail server on Win2003 and search for backups add a 2 TB external hard drive. I think that I´d be simple add in Win 2003 vm ware config and see the resource in Windows after restart. Of course, this didn t happen.

  I can not even see in available resources. I read some of the similar posts here, and some say that this USB support is not available in ESX Server 3i 3.5.0 and I want to upgrade. Others say it s enough to reconfigure the VMX file to add the USB support. I had a quick glance in the vmware log and he says (see below) that he actually sees, then there might be a glimpse of hope.

  Yes, I have plugged in and out several times in despair :)

  The problem is worse that I cannot access the server host correctly because have no knowledge of Linux and am looking at all this only through the installation of the client Win 2003. So the upgrade to eventuall wouldn be an easy thing as well...

  Can I please ask you to help if West any solution that would solve this? Thank you very much

  

  Infrastructure Client 2.5.0 (build 147633)
  ESX Server 3i 3.5.0 (build 199239)

  Hello

  
  

  The function is not available in 3.x, there is no 4.1.

  
  

  Improve the environment to 4.1 or above, this would help you to use additional features and bug fixes.

  
  

  See you soon,.

  NS

• I have my camera, a Kodak M1033, connected to the computer by a usb cable. The connection is not recognized. What I can do.

  My laptop with Windows XP does not connect to the camera?  How can I reconnect these?

  I have my camera, a Kodak M1033, connected to the computer by a usb cable.  The connection is not recognized.  What I can do.

  Install the software from the CD provided with the camera. If no CD not supplied with the camera, you can download Easyshare for XP to Kodak support on kodak.co.uk

• USB 2.0 devices are not recognized on Satellite L

  Hello

  All of the usb 2.0 device is not recognized on my laptop.
  I got a message stating that the driver are not installed. I'm looking for the driver on the support site, but could not find them...
  I've updated the bios and chip set utility, but still nothing.

  Any idea?

  Hello

  What model of laptop do you have?
  What operating system do you use?
  Since when you noticed this problem?
  Did you test all USB ports?

  Have you tested with different devices USB ports?

  Please post a little more information.

• USB printer (Canon MF4150) is not recognized. Please help. __

  USB printer (Canon MF4150) is not recognized.  Help, please.
  What I tried:
  remove the printer
  Uninstall and reinstall the printer drivers
  printer plugged into every usb port, all working with other equipment
  plugged the printer with a different usb cable.
  stop, and then turn on the printer.

  Thanks in advance.

  Hello murrcat,

  Thank you for visiting the Microsoft answers community.

  To ensure that the procedure for this particular model is followed during the installation, please take a look at this .pdf of Cannon under the install/uninstall software.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I use windows 7 64-bit edition Home premium and I cannot connect to access database in java program.it shows error database connection driver not installed.

  I am using windows 7 64 bit home premium I installed ms office 2007 and did all the settings.
  but I am unable to connect to the Access database in java program.it shows error database connection driver not installed.
  Please give me the solution...

  Hello

  I suggest you to ask your question about Java programming forums on the subject.

  https://forums.Oracle.com/Forums/Forum.jspa?forumid=922

  You can also ask your question on the forums to access.

  http://answers.Microsoft.com/en-us/Office/forum/access?page=1&tab=all&TM=1349633636662

• External Toshiba HARD drive not recognized on USB 2.0 ports, but only on USB 3.0

  Hello

  I have a Toshiba drive external HARD 750 GB USB2.0/USB3.0
  Now, this HARD drive is not recognized on USB 2.0 ports from my laptop (same thing on my desktop computer) but only on the USB 3.0 port.

  I have try on port USB2.0 computers different (desktop, laptop) but it doesn't work. The LED is the lightning, but the drive does not appear in the file Explorer.

  You have any ideas?

  Thank you

  > Now this HARD drive is not recognized on USB 2.0 ports from my laptop (same thing on my desktop computer) but only on the USB 3.0 port

  USB 3.0 port 900mA feeds. The USB 2.0 port common provides 500mA.
  I think that the HARD drive needs more 500mA power in order to work properly.

  So if you want to use the HARD drive on USB 2.0 ports, I recommend you to use a USB Y cable which allows to connect the HARD drive to two USB 2.0 ports

• external USB drives not recognized under xp pro 64

  I bought a genuine version of XP Pro 64 to load on my computer and because Win 7 froze with drivers nVidia graphics.

  When I plug a recently bought Seagate Goflex or one of the new Western Digital external hard drives, they are not recognized.

  They do not show on my computer or disk management at all.

  They appear in Device Manager with a yellow question mark big under 'other devices '.

  I right click on the hard drive in the Device Manager to update the driver, and it always fails.

  Before ask you, these USB drives work perfectly on my other XP Home 32 System. The cables are good.

  I tried different ports, front and rear... no good.

  My system XP 64 Prp is updated w/Windows update and software chip to the motherboard.

  Strangely, I have a hard drive WD Passport USB 500 Gb one-year-old that works fine on XP 64 system.

  WD technicians say that I am the only one with this problem. PlugNPlay needs no driver, what do say.

  I also have IDE/SATA USB cable w / the power cable, I use to connect my old internal drives.

  Works fine on the XP Home 32, but I get the error "USB to ATA/ATAPI Bridge" in the device with the 64-bit System Manager.

  Yes these devices are all "turned on."

  Something is missing on the XP 64 system.

  Help is very appreciated.

  Been looking for a solution for a week now.

  Thank you.

  Hello

  See the following articles that may help you resolve this problem.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive
  http://support.Microsoft.com/kb/925196
  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?
  http://support.Microsoft.com/kb/314634

• HP TouchSmart 600: External Toshiba USB 3.0 drive not recognized on HP Touchsmart

  I have a desktop HP Touchsmart 600, and I bought a 1 to Toshiba external USB 3.0 drive and when it plug to the USB port, it does not, even tried the other port and restarted, but does not yet recognize, I tried to reload the USB Chipset, but no cigar. I am able to use it on my Sony laptop. I would be grateful for any help or suggestion. Thank you people.

  Hi @StevieB1,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with the external drive not being seen. I'll be happy to help you.

  Please, try the steps in Troubleshooting connections USB (Windows 7).

  I hope this helps. Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Floppy USB drive not recognized when installing WinXP on Satellite Pro L40

  History:

  I bought a Satellite Pro L40, it came with windows vista. I can't stand vista windows for obvious reasons. so I formatted the HARD drive. I have a copy of windows XP.

  IV ' e read on the internet that I need Intel storage driver manager...

  IA´ve got the driver, he got on a floppy, and it does not, because when I start to install XP, it works (after pressing F6 & choose the driver to install). I come to the part of license agreement, press F8 accept...

  I select the partition I want to use (in format completely on vista). It starts to load more stuff... so he said "PLEASE INSERT LABELD - INTEL MATRIX STORAGE MANAGER DRIVER - DISK IN DRIVE A:" "PRESS ENTER WHEN READY."

  The disc that I used in the first place is always in. when I press on enter, nothing NOT to PAST (the USB floppy drive is not yet into action)

  How can I make it work? It is that I can get.

  I DON'T WANT BACK TO VISTA - HELP!

  This could happen if the floppy USB doesn t drive supports the standards of law. Some people have reported on different websites many floppy drives are not recognized.

  However, worry guy. I have a solution ;) (jeaaa: D)

  Try to create a new XP CD using the software called nLite!
  Then, you could include the SATA (Intel Matrix Storage Manager) driver in this new CD and then you could boot from the XP CD again.

  For details and how to use the nLite please Google because there are a lot of useful Web sites.

  Good bye

• Connecting flash drive not recognized

  username and password not recognized by download of update and I don't have access to the original e-mail

  The password that you are asked is YOUR COMPUTER password, as is the operating system that is asking to specify the password.  It is not your password Apple ID.

• HP EliteBook 8730w: replacement of SSD for the boot drive not recognized

  I'm trying to install a Samsung SSD 840 EVO 500 GB instead of the original 500 GB HDD in my Elitebook 8730w (product no. VF889PA #ABG). The 8730w has the latest BIOS (F.20) installed and that is running Windows 7 Professional 32-bit (fully patched).

  When it is connected to the laptop through a USB adapter, to clone the HARD disk image. the SSDS works correctly. Cloning through data Migration Samsung is reported as a success, and the image of the C:\ drive occupies approximately 153 GB. The image of the disc does not include the partition of 1 GB dedicated to HP_TOOLS, due to a known limit of the Samsung software supplied.

  When it is installed in the HARD drive Bay. the SSD is not recognized as a drive and does not appear in the list of startup options. The available boot options only shown are the DVD or a network boot.

  would be very grateful for any advice on the steps required to successfully install the Samsung SSD as boot drive.

  Hmmm.
  Honestly no, I'm not happy with this one. If it was my machine, I'd be a little concerned about whats the corner of the street. In view of the age, is not surprising really, things wear out over time, the mere fact of electronics.
  
  Search through everything you have posted, all photos, pdf, all the text double checking. I am absolutely puzzled as to what happened. If you 100% does not reinstall the hard disk between the posts above where no HARD drive is detected in the menu boot options for the post below that where the HARD drive is detected in the same menu. I would say that you have a problem with either, the ssd, the computer motherboard laptop or the small connector on the sata port, I think on these is integrated on the motherboard, so it seems that your advice is doubtful.
  If his works now, great... but be aware that your machine can fail at some point in the near future. And it looks like a defect of the motherboard, other things are probably waiting to fail.
  
  There is no reason whatsoever your laptop must not have seen this ssd at first startup. A HARD drive is a HARD disk, if its compatible sata, then it will work, no doubt. When he is not on an older machine, its probably a sign of a faulty component.
  
  Looking through your bios options, I recommend the following.
  
  On startup options, get rid of internal nic pxe boot, that will only slow your machine at startup as it will seek for a network bootable device. This is the message that you get at startup saying Media Test Failure, this page is preventable with this option disabled.
  Less built lan/wlan switching on enabled in the options of the terminal, also change. This means that if you use wifi at home for example and you decide to plug in a cable network directly to the router to speed up the connection, it will not pass if it is not defined, you will have to do it manually. I work in a large company and the number of people who have this option is unreal. They all assume when they are docked they will on the wired connection.
  
  Because we are here too, if you ever have problems with a flickering screen, first thing to try, is disable the ambient light sensor which is just below this option of switching. Its fine on normally, but its quite common on 8560p for this causes a flickering screen.
  
  Hope that helped. Good luck in what you decide to do with the machine

• 1.5 TB external DRIVE not recognized on various laptops disk

  Hello

  I was wondering if someone could help me.

  I bought my 1.5 terrabyte toshiba external hard drive just for more than a year. It works fine on my other computer, laptop and cell phone from my boyfriend, but when I joined four other new laptops (all different brands) recently it was not recognized at all on these laptops.

  Is there something wrong with my outside or something on these computers it prevents to be recognized? Do you know how I can fix this problem?

  Thank you very much!

  Hello

  And if you connect the external HARD drive to your boyfriend s computer laptop, everything is always ok? Only problems with new laptops?

  Well that s really strange have you tried another USB cable and different USB ports?

  Maybe on the new laptops the antivirus or firewall blocks access to the external hard drive. Check your security software and to allow external devices.