Numbers of USB port on P20 - 832

Similar Questions

• Zbook G3 HP: HP Zbook Thunderbolt 3 Dock USB ports not working not

  I have a HP Zbook Thunderbolt 3 dock on my HPZbook G3.  I've recently updated the BIOS and the firmware to the latest version to solve other problems 'dock '.  Am now at the latest for both.  The two monitors and ethernet on the work of lightning 3, but none of the USB ports are active.

  I am sure that the USB ports work, because they used to work before the update BIOS and firmware.  Keyboard, mouse, or USB memory on the dock work.

  I tried to go to the HP support and install the updates with the USB in it, but it didn't work.  I have a workaround - just connect the laptop directly, but I'd like to get my fully functioning dock.

  Device Manager does not display devices with questions.  I'll try to update, but I don't know which one to look at.

  

  Hey people,

  HP is dedicated to providing quality products to meet the needs of our customers. We listen to the customer feedback on our recent Thunderbolt Dock for use with the latest products ZBooks, and Elite Notebook. We continue to work with our customers to solve problems.

  Please find tips and updates to improve your use of the HP Thunderbolt docking station.

  1. The Thunderbolt dock uses the latest technology thunderbolt. To be fully functional, it takes the latest firmware, BIOS, and drivers to work properly. Please follow the step by step process as described below in "The process of updating your device".
  2. Here are links to the user, technical white paper guide helps and guides troubleshooting. Please, use them to help when you have problems after you have fully updated your device and platform by following the instructions above. Please note that you may copy and paste the links in your browser.
  3. If you still have any questions, please call HP support. We're here and eager to help succeed you using the HP docking station new Thunderbolt.

  Useful links

  User Guide: http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=11122586 & docLocale = en_US & docId = emr_na-c05141189

  Technical white paper: http://www8.hp.com/h20195/v2/GetPDF.aspx/4AA6-5088EEW.pdf

  Help & troubleshooting the Dock: www.hp.com \support\thunderbolt3dock

  Process to update your device

  NOTE: Instructions below is found in the User Guide "Getting Started" to "Implementation of the dock" to "step 2: update your computer.

  Before connecting the dock to your computer, update the BIOS, software and drivers on your computer.

  NOTE: If you do not, the wharf may not work. For best performance, keep all software and drivers on your computer up to date. (See table 1)

  Update the BIOS and the software and drivers:

  1. Go to http://www.hp.com/support. Select the drivers and Get software, enter your model of computer (on the computer service tag) number, and then select search for my product.
  2. Click the link for your specific computer, select your operating system and then download the latest version

  BIOS, software and drivers as follows: Intel® Thunderbolt Firmware Update Utility, Intel's Thunderbolt

  Secure Connect Driver, graphics drivers, ASMedia eXtensible Host Controller Driver, Broadcom Ethernet

  Controller and driver Conexant USB driver.

  1. Install the latest version of the BIOS.
  2. Restart the computer.
  3. Install the last stroke of lightning Secure Connect driver Intel.
  4. Restart the computer.
  5. Install the latest Intel Thunderbolt Firmware Update Utility
  6. Restart the computer.
  7. Install any remaining updates in any order. Restart the computer after each update.

  Table 1

  For the products supported Thunderbolt Dock all HP
  Name of the component	Category on the Support Page on hp.com	Where to check (this applies to all laptops)
  BIOS	(BIOS)	BIOS F10 Setup to information system
  Intel's Thunderbolt course connect driver	(Pilot - controller)	Right click on tray icon Thunderbolt to settings for details.

  The Thunderbolt of Intel® firmware update utility

  (Firmware)

  Right click on tray icon Thunderbolt to settings for details. Note that the numbers on the left will not directly reflected. NVM Firmware Version: 16 PD Firmware Version: 1.07.03

  Intel Graphics Driver

  (Driver - graphics)

  Right click on the desktop to graphic properties (icon intel) Options & Information Center Support.

  NVIDIA graphics driver

  (- Graphics - Nvidia driver)

  Right-click on the desktop to NVIDIA control panel to information system at the bottom left.

  AMD graphics driver

  (Driver - graphics)

  Right-click on the desktop to graphic properties (top) to Information to software.

  ASMedia eXtensible Host Controller Driver

  (Driver - Chipset)

  Programs & features or the Device Manager to Universal Serial Bus Controllers (dock of needs to be connected).

  Of Broadcom Ethernet controller driver

  (Driver - network)

  The Device Manager to network adapters (dock of needs to be connected).

  Conexant Audio Driver USB

  (Audio - driver)

  The Manager of devices to sound, video and game controllers (dock of needs to be connected).

  BPPSQ-

  I work on behalf of HP

• Satellite L20 PSL2ZE: Identified as 1.1 instead of 2.0 USB Ports

  Model: L20 - 264 (PSL2ZE)
  OS: Windows XP Home SP2

  For some reason, 2 of the 3 USB ports are identified by the operating system as USB 1.1 devices (Standard OpenHCD USB Host Controller) instead of USB 2.0 (Standard Enhanced PCI to USB Host Controller). Is this as expected?

  User reported this behavior after installing a few webcam drivers (summary details, apparently a Logitech QuickCam Pro).

  Also, I am unable to find a suitable chipset driver package, since for this model, the driver page offers only a package Intel while device ID numbers point to ATI IXP SB400 chipset.

  Any ideas?

  Hello

  The same appears in my device manager!
  I have a Standard Enhanced PCI controller USB host and two inputs OpenHCD USB Host Controller Standard.
  But I put t have problems with the speed of the USB or something like that

  If you wish, you can remove the USB controllers in Device Manager and then restart the laptop again!

  This should load the USB drivers again!

  Check it out

• USB ports not working not not on Satellite Pro C650 - 18 d

  Hello
  I have a Satellite Pro C650 - 18 d on which USB ports are dead.
  So far, I've updated the chipset and BIOS - but they stay dead. It doesn't seem to be a power either. I have a USB key with LED and it does not light.

  Any ideas? It's under warranty and so unable to try something wild!

  Thanks for any help
  Jim

  Hi Jim

  I recommend you to reinstall the OS and test the feature with the factory settings. Please, test it with several different USB devices. If none of them works, you must contact the Toshiba service provider in your country and leave check s portable.

  Do you know how to find the addresses and phone numbers?

• HP Pavilion p7 - 1447c: replacement of HP Pavilion p7 - 1447c USB Port before

  My front USB ports have collapsed.  First of all a =, then the other.  Blue 'key' fell first and without these pins are bent too far to align correctly.  I would like replacement unit part number  I think install should be simple enough.

  Here is the list of partsurfer of part numbers.   Remove the front cover Assembly as shown on Pg 3 and look at the module.  Is this it?   The part number is shown on this page.  HP7-1400 uses the same module, Ebay $ 30

• ENVY of HP dv7-7265er - USB ports on the right side does not

  Test of the UEFI BIOS (after update F.10 F.29)

  Check USB port: FAILURE

  FAILURE ID: QWB664-6GX74K-QFPK0K-8D1W03

  PRODUCT ID: C6D03EA #ACB

  Hello

  Please find the link manual below the part number is USB card (includes cable) 681986-001 & check the page numbers 73 component replacement procedures.

  http://h10032.www1.HP.com/CTG/manual/c03591253.PDF

• USB ports don't work... flash drive, no mouse, do nothing

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  all the USB ports does not work; There is no error message. Have tried to disable/enable, stop and restart and the curse. None of these work:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Is to check the settings/settings (BIOS/CMOS) often F2 as you start so watch the display for
  access key - do well sure edge USB is activated if there is a parameter.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  ++++++++++++++++++++++++++++++++++++++

  Possible hardware USB badly shot - if a PC you can disable the onboard USB and use a
  3rd party card extension that are not expensive. If a laptop then you will need technical assistance
  a real computer store (not the leeks and the glances at a big box BestBuy or othe stores) or system
  Support from the manufacturer.

  Also check with the manufacturer of system and their forums support (as appropriate) for known problems and/or
  solutions.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Driver files that run the parallel port and USB port

  In the system information utility where to look to find the parallel port and the port driver USB, name of file that manages these?

  Know the drivers specific, is only half the story.  Why you looking for these drivers?  You have problems with your parallel port or USB port?  This can be caused by problems with drivers or it could be a hardware problem (hard to diagnose a hardware problem without good parts to swap and test).  If you need to update the drivers, you must use device (not msinfo32) Manager - or maybe clicking on an executable file that loads the drivers automatically (depends on how it is sent by download).

  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need drivers (I assume that you want to the parallel port and USB ports), get the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.  Or run the Setup program of driver provided by the vendor of the computer or the manufacturer of the device.  Be VERY careful get Vista compatible drivers for these devices are difficult to identify (they usually come with the numbers of model or something like that if they can have serial numbers) and using the wrong drivers could make the problem (whatever that is) worse.

  If you update the drivers succerssfully and the problem persists, then it is probably a hardware problem.  In this case, contact the manufacturer of your computer for technical support (hopeully it is still under warranty) or bring it to a professional computer repairman (NOT Geek Squad or one of those big store centers because they don't really know what they're doing and charge a lot for this level of expertise) to have the components tested and possibly replaced.

  I hlpe that aid.

  Good luck! Lorien - MCSA/MCSE/network + / A +.

• USB ports 2

  The product name and number: HP Pavilion Elite HPE-460, XM557AV #ABA

  Windows 7, 64-bit

  How to know which USB ports are USB 2.0?

  Hi FunkyGer,

  Go to this page:

  http://support.HP.com/us-en/document/c01925486

  Then scroll down and click on the + sign of IO Ports, then the sign of return i/o ports.

  You should see this image with an index below:

  

  4 ports numbered 12 (I put a red box around them) are USB 2.0 ports.

  I hope this helps!  If this is not the case let me know and I'll see what I can find for you.

• BlackBerry Classic USB Port disabled

  Hello

  I have a classic BB, he was charging, and came up with an error message "one of your USB ports ended load and has been disabled".  I rebooted, but now have the questions below:

  1. the buttons on the right side (high volume / low etc.) no longer work.

  2 one of the speakers at the button no longer works.

  3. I've lost some data of contact including numbers and photos.

  4. sometimes video will not play saying that the format is not supported, but I wanted the video previously.

  5. to make a call the phone sometimes puts mute / constantly resets the call.

  Y at - there a reset option, I know there is an erasure of data, but the above seems to be more material related.

  At soon Ed

  Agree with your conclusion at the end. Here are my thoughts...

  A hardware reset on BlackBerry is performed by removing the battery. Not an option for devices with non-removable battery.

  There are two ways to do a software reset the BB10. http://support.BlackBerry.com/kb/articleDetail?articleNumber=000002141&language=English

  A reset to the factory on BB10 settings is carried out using link. http://support.BlackBerry.com/kb/articleDetail?articleNumber=000021918

  A security wipe erases all data and user settings and make the data unrecoverable. It can be launched from the handset. http://support.BlackBerry.com/kb/articleDetail?articleNumber=000014058

  I really hesitate to reconnect the device to a power source. I might try a reboot hot first and see if the behavior of the weird software fixes. Then I could try a security wipe. But if the unit is under warranty, my next step would be the point of sale customer service call.

  Just curious, was the error or warning on USB is displayed on the device or the computer?

• USB ports stopped working unexpectedly

  Hi, I am currently on "Toshiba Satellite C655"run"Windows 7 Home Premium". It's a laptop of 2009 model (2 GB). Last night (24/02/14) my USB Ports stopped working, they have been and continue to read anything every time I have to plug my devices. I usually only connect a cooling block and a USB mouse to the computer. They worked perfectly until I disconnected the. When I reconnect them, they work momentarily, and then I hear the beep sounds when you eject a device. I tried to connect several flashdrives, a printer, and one I tried the following hotfixes:

  Note: The order of numbering has nothing to do with the order, I tried to apply each patch unless specified elsewhere. This computer had Windows 7 Home Premium REINSTALLED at some point. Just for your information. This message was made when there are others with the same problem is due to the fact that no solution not specified by Microsoft Technical Support or the Microsoft community were effective.

  1) System Restore to the last known point, where they worked (and still). (Point restoration @ 15/02/24)

  2) Windows Update

  3) turn off the computer, disconnect the battery and the power supply and holding 'On' button for 10seconds.

  (Note: whenever I turn on the computer now they work only for a moment, usually from 60 to 180 seconds.)

  (4) Start > research ' Device Manager '> "De Bus USB controllers" Expand and turn off and restart the computer. They are re - activate automatically but my problem persists.

  (5) download and run "Microsoft FixIt.WinUSB... ", on the 1st, I had a problem with devices not updated. But I actually watch updates by using Windows Update and ""searching for hardware changes "" on USB Bus controllers "." I then did a 'System Restore' and now Microsoft FixIt found no problem but the USB Ports don't always work.

  (6) will ' services.msc"and change the Startup Type of Manual to Automatic for Windows install and restart Windows."

  7) regedit

  8) sfc/scannow

  I am really lost with this problem now. My laptop works and worked perfectly fine until this problem occurred. I have fixed minor problems with computers before, but this is a bad joke for me now. If someone could please help me with this problem I would appreciate it a lot. Thank you very much.

  Thank you for your help, but I discovered something funny on my computer. My cooling package (product name: Laptop Cooling Pad NSB;) HYCF-6181-2 model number) is to disable my USB ports when I plug. If I leave it unplugged and restart my computer, my USB mouse is still working on a port. Also tried using my USB and other devices. The problem is my block of cooling that strangely disables my USB ports, whenever I plug. Thank you very much for your quick response, fortunately the answer might help me in the future. For now, I have solved my problem.

• USB ports not working not not in Windows 10 after update laptop (Vostro 1500)

  I updated an old laptop, Dell Vostro 1500 from Windows 7 to Windows 10. Everything is great, the touch pad works, it is much faster than it used to be, one thing is, none of the USB 4 ports work.

  I went to the dell website, all I get is an alert indicating the device is not compatible with Windows 10 and that everything is up to date. I couldn't find the specific drivers on the website of intel and their program detects that too, everything is up-to-date

  I have google and could not find anything other than sites like pilot scape, which I don't know

  In Device Manager, there are 14 points to USB, there are 7 USB Universal Host Controller family with 2830-2836 A numbers

  Besides, there are 7 USB Root Hub with an error symbol. When I check the properties I have "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged (code 19)"".

  I tried to uninstall and looking for changes, that did not work. I also tried fix registry of CCleaner

  What are my options, is it possible to get USB ports work on my laptop?

  Thank you

  Hi Benny,.

  If please see my previous response to jtrand02 and click on the link for a list of compatible systems.

  The model of your system is not compatible with W10. I advise you to stay with W7/W8.1 unless you want to try your luck with W10.

  Let us know if you have any other questions.

• MacBook Pro USB Ports

  MacBook Pro my keyboard and wireless mouse work in my usb ports but I can't mount drive flash sticks? Do not display in the finder, but will be blink in disk utility then disappears?

  Flash drives show in disk utility?

  In the Finder > Preferences > sidebar > devices is verified external drives?

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• A 'Powered USB Port' does not work on Mac Mini

  I have an external POWERED USB multiport block. When I plug the Superdrive into a Port powered on the unit, which of course is connected to my Mac Mini (2012) the Superdrive not even she acts as if it is connected and will not accept a disc. All ports are USB 3.0. I'm so uncertain that the Superdrive will work on any USB port other than the one on the Mac itself. Any advice? I El Capitan installed, but it has worked that way before the upgrade.

  This specific USB 3 hub? Not all work with the Mini

  Hub USB 3.0, attached to a Mac Mini does not work

  Re: Is there a USB 3.0 Hub that really works with the Mac Mini?

• iPhone 7 will not play audio via the USB port on the car.

  When I plug my iPhone USB port 7 more in my car (15 Jeep Grand Cherokee), the artist/song/podcast information appears on the screen, but the sound plays through the speakers of the phone.  I have confirmed that my settings are all the same as they were on my 6s, who played without any problems via the USB connection.  Bluetooth streaming works fine - no problems at all.  Any ideas, or is this a problem similar to that people have with CarPlay?

  Welcome to Apple Support communities, kevo.mac!

  Congratulations on your new iPhone 7 more! I see that you connect with your Jeep Grand Cherokee using the USB port. Everything seems to work fine, except that the music plays through the phone instead. I'll be happy to help you to get this working.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  If you are using USB playback

  Restart your iOS device and your car.
  Connect your iOS device to another stereo USB port (if you have one).
  Try another USB cable.
  Update your iOS device.
  Install the updates to the firmware of your car radio.
  Test of audio playback from a different application. If you can not play audio from a specific third party application, contact the developer of the app for help.
  If you can not play audio from an app Apple, contact Apple technical support.

  Enjoy your weekend!