OBIEE 11.1.1.6.2 authentication via Shared Services EMP 11.1.2.2 BP1

Similar Questions

• Force the user to change password with the authentication of Shared Services

  Hello world
  
  is there a way to set a property that the user must change his password when he connect is the first web analytics?
  Version is 9.3
  
  Thank you much in advance.
  
  Best regards
  nois

  They will be able to change a password within the workspace, just inform them of their new password and then they can change in the workspace.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• The number of devices (MAB) can be authenticated via the internal identity stores ACS 5.3? ACS 1120 (802.1 x))

  Hello

  I m currently looking for a document that specify the number of MAC addresses can be stored and authenticated via a GBA (1120)? I prefer to use the identity store internal AD or LDAP for authentication of the MAB for 802.1 X project.

  I would like to know what impact the GBA? CPU/MEM?

  What is the impact on the user authentication? delay, delay, etc.

  Please specify any other restrictions or side effect.

  Thanks for your comments

  Concerning

  Torsten Hello,

  I have confirmed on our database as well as this community and the answer is the same

  Refer to:

  https://supportforums.Cisco.com/thread/2101657

  Added additional information:

  Internal Users : 300000 Internal Hosts : 50000

  Best regards.

• Send to user datetime is authenticated via headervar

  Hello
  
  I asked where I should send datetime at which the user is authenticated via headervar in polidy field, OAM?
  
  Can you please guide me which command or funtions returns this value?
  
  Thanking you,
  Prashant

  Can be a technique to do: activate the oblastSuccessFulLogin attribute in the user profile by using the console of the identity and then pass in the headervar in the Policy Manager.

• sensor to recreate the image via the service account?

  Hello, I have the following problem with a JOINT-2 (4.1.5 S211) module:

  I am able to get to the screen to login via SSH. I connect with my login and my password but the following error: cannot communicate with authenticationApp (getUserAccountConfig). Please contact your system administrator.

  You want to run cidDump? [No]: _

  I can, however, enter into the sensor via the service account. I tried to stop and restart the CID as well as restart the sensor, unfortunately without success. At this point, the only thing I know to do is run partition recovery for reimage the sensor - is it possible to do it on the service account?

  -Patrick

  Hello

  You use the set of user name and password? What happened to the sensor through telnet and HTTPS access? Are you facing the same problem with above all?

  If the password is correct then the engine of Authantication could have been corrupted.

  You can rebuild image of the sensor through the service account.

  Start the JOINT-2 to the maintenance partition:

  cat6k # hw - module module reset cf:1 module_number

  Session in the partition maintenance CLI:

  processor cat6k # session slot slot_number 1

  Connect to the partition maintenance CLI:

  Login: guest

  Password: cisco

  If it is possible, then you can recreate the application partition image:

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/csids/csids10/hwguide/hwclipr.htm#wp91045

  After you re-create the image restart us the JOINT-2 for the application partition:

  cat6k # hw - module module reset hdd:1 module_number

  Check that the JOINT-2 is online and that the version of the software is correct and that the status is ok:

  cat6k # see the module_number module

  Connect to the JOINT-2 application partition:

  processor cat6k # session slot slot_number 1

  You have to retrieve your backup configuration.

  Note the post if it helps.

  Ashish

• Client is not authenticated to the Service of the inventory of VMware

  Dear friends,

  I am facing many problems with our vCenter. Its has started with lack material and discovery tab, I am unable to connect using the web client. I tried to dig the cause but could not get anywhere as several articles/discussion found.

  I get the error message saying "The Client is not authenticated at the Service of the inventory of VMware". Something that I found while troubleshooting is in the identity source SSO under the local host, the abbreviated name of the remote vCenter (DC) is added and as default instead of the local name. Is this normal? We also have a MRS. in our infra, FYI.

  I join DS newspapers which is full of information of identification/powers invalid source error no valid/unknown which I'm not quite understood.

  Can someone help me with the problem?

  Thank you!

  Best regards

  Hari.

  Because of studies and solved my problem with the article below.

  Re - around the and the reinstatement of VMware vCenter Server 5.1 / 5.5 and components (2033620) | VMware KB#register vCenter Inventory Service with vCenter Single Sign-On

  
  

  Thank you!
  

• VCSA 5.5 Client is not authenticated to the Service of the inventory of VMware

  NEI miei con test appliance del virtual Center sto con problemi con autenticazione riscontrando Active directory.

  Ho put server it dominio. Misconfigured it dominio nei percorsi di autenticazione, the appliance correctly tutti gli e users vede I gruppi.

  Nella sezione vCenter Users and Groups ho added he mio user AD al gruppo administrator, per cui nel gruppo [email protected] e even he mio account AD

  Provo a collegarmi tramite it customer web e mi loggo, by cui integrazione seems funzionare, da mi my i seguenti if:

  Client is not authenticated at the Service of inventory - VMware https://192.168.0.130:10443

  Nel pannello task:

  Failed to create the object managed - urn: vmomi:TaskManager:TaskManager:14F157BB - DC2B - 4 C 29-87 D 0-CD8351E33092.

  Customer Tramite non mi fa autenticare. MI dice che sono distant credenziali

  Ragazzi, sono riuscito!

  Nella configurazione SSO--> identity source ho injected the prima voce e Active Directory not her seconda voce.

  Avevo injected her seconda voce, perched in molti e post tutorial che ho trovato knew internet used di utilizzare quella.

  

• I have several websites in Muse. Everything was fine until last night. When publishing to Business Catalyst I get a message, teling me the following: unknown authentication problem - shared unknown error: 80. What should do?

  I have several websites in Muse. Everything was fine until last night. When publishing to Business Catalyst I get a message, teling me the following: unknown authentication problem - shared unknown error: 80. What should do?

  Hello

  To resolve this problem, you will need to disconnect muse and connect again.

  Here are the steps to the disconnection of Muse:

  1. help > log out.

  2. Once signed on restart Muse (please sign using Adobe ID if she invites to connect)

  You should be all set.

  Concerning

  Vivek

• Download files via web services

  Hi experts,
  
  We are trying to make the old migration of a set of data in siebel ondemand. There are approximately 1 million records. Don't you think that it is possible to upload files via web services?
  
  (assuming that the profession of oracle service is off option because we don't have the budget)
  
  Thanks in advance, Sab

  SAB, Yes. However, the import file cannot be more than 30 000 records or more than 9 MB for the file size.

• A problem when authentication via Radius ASA

  Hi all

  Please give me a helping hand. I have a problem when through ASA 5520 via Radius Authentication for ACS 4.0 via the VPN device. I need to configure secure authentication and NAC for remote user VPN. It simply does not work, but it works when you use Ganymede so all the connection seems to be ok as ACS succesfully authenticate a remote via MS AD VPN user when you use Ganymede. But I read that I can not use NAC when Ganymede using, I'm good? ASA and ACS journals indicate a problem with the shared key but I already double checked the key on both sides, the IP address is correct on SAA and I also tried all possible methods of RADIUS on SAA. Any idea where might be a problem?

  Hello

  When you use ACS 4.0, then make sure that the AAA Client for ASA entry you created on GBA, if under a NDG, then make sure that there is no key to the NDG level.

  Otherwise, pass entry client ASA as RADIUS ACS in NDG (Unassigned) on ACS.

  Kind regards

  Prem

• ISE Sponsor authentication via RADIUS

  My client demand change us the way the sponsor users are authenticated and authorized to access portal Sponsor of ISE.

  Their similar to the request of the ISE AD via a RADIUS server first. They said "avoid sending credentials of the AD to ISE directly. Under this condition,.

  My research and limited knowledge give to assume I have to define a RADIUS Proxy

  I think I can define an external RADIUS server, but I wonder if this creation, it would be available as a Source of identity for "portal Sponsor sequence.

  If this is not the case, how can I add this? After that, what conditions or attributes should I look for to use in the 'strategy of group sponsor' in order to filter the name of user and password and allow access to employees and deny access to everyone?

  I'd appreciate advice that you can give me to offer the best recommendation to the client.

  Kind regards.

  Daniel Escalante.

  Hi sliman,.

  Unfortunately, this document is not relevant to what Daniel is trying to achieve.  There need to be able to refer to a RADIUS server as part of the Sponsor authentication process, that is not possible today.  The only possibilities are that I have indicated in my original answer.

  Richard

• External authentication via the PHP script failed

  I'm not a PHP genius - in fact I'm not a backend coder so I'm kinda struggeling with the sample scripts - I still hope for a sample of CF....
  
  I'm trying to run and connect to the CAA via the command line (Terminal). I'm not sure what I'm doing wrong - this is what I'm passing:
  PHP f /Applications/MAMP/htdocs/afcs.php args - debug - host = my_pass, http://connectnow.acrobat.com, fcguru, my_login
  
  The username and password I spend are correct. However, I get this response:
  Error: message exception 'AFCSError' with ' < State response 'error' = >
  < error code = "AUTH_FAILED" >
  < msg > failed authorization < / msg >
  < / error >
  < / answer >
  ' in /Applications/MAMP/htdocs/afcs.php:86
  
  Really struggeling with this. Once again I get this working from the command line, I don't know how to call it from a script instead. I use CF on the backend, no PHP.
  
  Kind regards
  
  Stefan
  
  

  Thank you, this is very useful. It seems that I can now connect from the Terminal so that's a good start. Also, I did not see external authentication in PHP for example - I must have been blind.
  I'll see how far I get with that. What I'm trying to do is spawn new rooms based on a template on the fly, and I have some doubts, I'll be able to understand this myself.

• Foglight authentication via a URL

  Hi guys, can I somehow pass the details of authentication (username and password) in the URL?

  A customer asked me to create a dashboard tailored to its environment for Dept. IT can see situation... so I would share link dash at his stuff IT without that users must connect to the Foglight...

  Is this possible?

  It looks that you would like to use the NoLoginUser feature where you available to the user and configure your dashboard to provide an authorized role to NoLogin.

  This way you can share the link to the dashboard and let be accessible.

• Authentication via Active Directory

  Hello

  We got Wireless LAN Controller and 5 Access Point, its still not production.

  Connect to the gateway using WPA2 static, how can authenticate via Active Directory instead of WPA2.

  We got the domain controller Windows 2003 acting as DNS / DHCP

  Thank you

  ST

  Sure... just replied to this thread.

• Cisco ISE 1.1.2.145 Admin authentication via the LDAP protocol

  I have configured the LDAP protocol and able to retrieve our LDAP directory structure. Now, I'm trying to point authentication "Admin Access" Source 'External identity', which is the new LDAP IS I created. But I couldn't find an option to authenticate locally if for some reason the LDAP configuration does not work. I learned that the ISE can automatically return to local auth as external sources Idenitity are inaccessible. How can I test the LDAP authentication with breaking them our Admin Access? I thought to open two parallel sessions, one with Super Admin account Local and one with the domain account. But I noticed that ISE communication is smart enough for the closing session/connection no matter what other sessions in different browsers so, basically, I can't open two parallel sessions the same machine to test. Suggestions? or am I missing something here?

  Thanks in advance.

  Hi Srinivas,

  Even if you configure LDAP as a source of external identity of admin access, you can always internal relief without having locked. According to the ISE user guide:

  During the operation, Cisco ISE is designed to "fall back" and try to perform the internal identity database authentication, if the communication with the external identity store has not been established, or if it fails. In addition, whenever an administrator for which you have configured external authentication launches a browser and initiates a logon session, the administrator must still the option authentication of demand through the local Cisco ISE database by choosing 'Internal' to the Selector drop-down storage of identity in the Connect dialog box.

  http://www.Cisco.com/en/us/docs/security/ISE/1.1/user_guide/ise_man_identities.html#wp1351543

  Please see the attached screenshot by my lab ISE:

  

  I configured the admin authentication against AD, but I still see both 'Internal' and 'AD' at the time of the connection.

  I hope this helps.

  Thank you

  Aastha