Off mode "Eve", computer automatically connects instead of connection

Similar Questions

• How can I take my monitor off mode "Eve"

  How can I take my Q1859 monitor off mode "Eve"

  Hi there @Ally55,

  I hope you find your experience of positive Support Forum! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you are looking for help with a screen go to sleep. I'm happy to give you a helping hand with this.

  Please give this document a try: HP and Compaq monitors flat screen - Flat Panel Monitor display of the Message on no Signal, Signal out of reach, sleep or energy saving.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• No Internet connection when the laptop is off mode "Eve".

  When I close the lid on my laptop (which puts the computer into sleep mode) or he falls asleep with the lid open, there is no internet connection when I wake the computer.  I have to either run the Troubleshooter or perform a reboot to get connectivity.  This problem just started and I got the laptop almost 2 years. It runs on Windows 7.  I don't know much about computers.  Does anyone have any suggestions?

  When out of standby or hibernation, your wireless network connection can not reconnect if power on your wireless adapter options are set to a power saving mode. To check or change your current power options, follow the steps below for your operating system:

  1. Open Power Options by clicking the Start button, click Control Panel, clicking system and security, and then clicking Power Options.
  2. Next to your currently selected power plan, click change plan settings, and then click that to change advanced power settings.
  3. Click to expand wireless adapter settings section, and then click to expand the Energy saving Mode section.
  4. If the setting is currently nothing else that "Maximum Performance", click it, and then select A maximum Performance.

  You can also set the setting on drums on "Maximum Performance". For more information on power management, see the feature page of power management on the Microsoft Web site.

• How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

  How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

  Thank you very much for your help, if necessary.

  Quite a few questions, send, but I will do what I can to answer them.

  I recommend first to buy a router, even if it's one you won't connect to internet and it network with others your PC and printer. This will give you the best features and the results of what you're trying to do.

  In addition, the automatic stop of the printer function can be disabled and is not affected by the type of connection. Usually, you can go through the configuration Menu and select tools to change the options there on the energy saving features.

  Finally, the auto off function on your computer is a Windows question, but one easy answer. If you're on a laptop, you can right click on the battery in the tray (lower right corner) and change the settings for energy conservation.

  You might be better off installing the printer via the USB cord and alternately inspiring when you use it, but which is not optimal if you are printing only a few documents on an irregular basis. A network connection is the easiest to manage across multiple computers, honesty, but you have certain requirements for this connection and limits as well.

  I hope this information is useful!
  

• Unwanted automatic reactivation of the Mode standby mode when it is connected to the Internet

  I have a relatively new home office Pavilion model p6140F, product number NP192AA, version number software 93NAv6PrA2.  Factory installed operating system is Windows Vista Edition Home Premium, 64-bit, Service Pack 2.  I am connected to the internet via a cable modem.  I made energy-saving settings for automatic sleep mode sleep.  Quite often the computer comes out of fashion "sleep" on its own.  What is strange to me, is that when this happens and I click the Start button at bottom left of the screen or any buttons on the Quick Launch bar, nothing happens on the first click.  Only on the second click the computer is what I normally wait until it gets when clicking on the Start button or the quick launch of the first time button.  I tried an experiment by disconnecting the internet cable from the computer modem and the computer behaves as I expect.  He remains in the mode "Eve" from one day to the next day when I unplugged the internet overnight.  It looks like something 'out there' on the internet is somehow take control of the computer, do not let it go in the mode 'sleep' and play with use and function of the 'Start' buttons and the quick launch area.  At the very least, it's embarrassing, if not malicious.  Is occurring with other users?  Wouldn't be some 'normal' functioning of monitoring by HP, Microsoft, providers of security software that I have permission, or is this behavior that should not be expected.  Thanks for any direction on the techniques of 'analysis' on mine could give clues at the origin of this strange behavior.

  Bad Board.  Marking as resolved.

• Suddenly I can put is no longer the computer in standby mode manually or automatically.

  Original title: Control Panel - Power Option

  Suddenly I can put is no longer the computer in standby mode manually or automatically.  I can only turn off or restart.

  Hello

  1. do you mean to say that the Standby button is greyed out?

  2 How long have you been faced with this problem?

  3. don't you make changes on the computer before this problem?

  Check the question in the clean boot State and send the same return. Also, contact the manufacturing of computer for BIOS update.

• Programs can not be started, or no response after the computer was not awake mode "Eve"

  Dear Sir.

  My lap top is under the VISTA system. Now the problem is that all programs can not be started or no response after the computer was not awake mode "Eve". I have to restart the computer to recover the computer to normal state.

  Please please let me have your advice to return to my email address: * email address is removed from the privacy *.

  Thank you very much!

  Eric

  Hi Eric,.

  You can follow these steps:

  Step 1: perform a clean boot to verify if an application or service is causing the problem.

  See this article for more information on the clean boot:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
   http://support.Microsoft.com/kb/929135

  Steps to perform a clean boot:
  a. click the ORB start on your desktop
  b. type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. in the general tab, click Selective startup.
  d. under Selective startup, clear the check box load startup items.
  e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  f. click OK.
  g. When prompted, click on restart.

  NOTE: Please check that you start the computer in normal mode after a repair. Follow step 7 article.

  Step 2: Configure the power settings for keyboard, mouse, and other devices.

  a. Click Start, click Control Panel, hardware and sound, and then click keyboard.
  b. click on the Hardware tab, and then click the properties button.
  c. click Change settings.
  d. click the power management tab and verify that the allow this device to wake the computer is selected.
  e. If "Allow this device to wake the computer" was not selected, select it and click OK.
  Follow the same steps for the mouse as well.

  If the problem persists, disconnect all non-essential devices (printers, scanners, USB drives). Restart the computer with only the original mouse, monitor, and
  connected keyboard. If this solves the problem of sleep/wake, one of the devices was causing the problem. Replace a device at a time and test to see if the
  problem occurs again. Continue adding devices and testing until you find the device that causes the problem.

  Refer to this article for additional troubleshooting steps.

  
  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista:
  http://support.Microsoft.com/kb/950686

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer automatically "wake up" and unable to wake up mode standby when left idle

  original title: screen saver does not work, the computer automatically "wake up". Computer regularly become inactive and cannot be stopped! Forced to pull the plug.

  We have a Vostro 200 with windows vista. The computer still works very well except for two major problems. The first: the screen saver does not work. The screen goes black minute before the screen saver, but when it needs to switch to screen saver mode, the fan in the computer is a thud and the screen turns back on. The second: If the computer is not alone for extended periods of time (hours to end upward in a weird semi-off state). The monitor becomes completely black (the power light goes from green to orange) and the power of the Tower light flashes continuously. If we move the mouse or the keyboard, nothing happens. We are not able to easily to "wake up" the computer. If we hold the power button down for 10 seconds, the round ends. If restart us the breath fan aggressively, but the screen will not display anything. The only way to get the computer working again is to turn off the switch that powers the computer for ~ 1 min and then put it back in again once. After a time abnormally long start-up, the computer goes to the exact same State it was when he went to the black start (the documents are always opened ect.). Does anyone have a similar experience? I am baffled and could use some help. Thank you!

  Hello

  I would guess that you have a hardware driver that is not fully compatible with the sleep mode function. I would check with the manufacturer and system of the various devices for driver updates (do not use Windows Update to do this). If this fails to solve the problem, you can turn off "sleep" (Control Panel/Power Options, check the settings of the engine at idle) or reduce the State of "s" that the system tries to get into the BIOS system (if available).

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Windows 7 to automatically connect to the network after the standby or Hibernate mode

  This just started two days ago after an automatic update Windows 7.  Whenever I wake up my laptop, I have to manually connect to the wireless network.  He used to connect on its own.  Not changed anything with the network or router.  I have the connection to connect automatically, but it doesn't.  He, however, automatically connect when I start the computer.  I tried all the tricks of problems of the past... I see the network and it will connect and works fine after that I have to manually connect.  Just can't understand why, all of a sudden, he stops connection.  Again, this started 2/10 after a Windows automatic update... it seems that all updates have been security patches and I hesitate to uninstall them because I don't really know what one of them is.

  Yes! I think that I fixed it. I tried all this without result. Then it hit me. Turn off the "allow the computer to turn off this device to save power" is fine and good, but what the USB port? They can do this also. "' Go to the Device Manager and do a right click, Yes, the network adapter and uncheck this box, but also do it for the" USB Root Hub "under"controllers of Bus USB.

• My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  Sync your iPhone, iPad or iPod touch with iTunes using a WiFi - Apple...

• How can I get my computer to automatically connect to the internet whenever I turn it on?

  Connect computer to internet automatically switch on

  How can I get my computer to automatically connect to the internet? Currently, I have to press Fn F1 to activate the WLAN - not something huge, but a tad boring. Another computer on the same network will connect automatically in setting in motion.

  It is a 'feature' of the particular computer you are using. Take a look at the manual; It may be a setting in the BIOS to turn on the wireless on startup.

• computer automatically starts in safe mode without prompting, a problem with your computer might be preventing Windows from start normally__

  computer automatically starts in safe mode without prompting, a problem with your computer can prevent Windows to start normally

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  Good luck and I hope this helps. Lorien - a - MCSE/MCSA/network + / A +.

• My continuous HP desktop computer to go to sleep more I use my computer. I have disabled the option to sleep on POWER SETTINGS, but he continues to go to mode "Eve".

  For the past 2 weeks my HP desktop computer has begun to enter the mode "sleep" whenever I use it. As soon as I turn on my computer it goes immediately into mode "Eve". I would leave it alone for a day or to and it won't happen again. More I leave it alone is more of my time. I tried to change my settings on the POWER SETTINGS, but he continues to go to mode "Eve". I don't know if it's a question of a hardware problem software. Help, please.

  Hi MakCalixte,

  Did you recent hardware or changes to the software of the system?

  Method 1:

  You can try to uninstall the graphics card or roll back the graphics card and check if it helps.

  For more information, you can consult the following articles:

  Uninstall a program

  Restore a driver with its previous version

  Method 2:

  You can also consult the following articles and check if the problem occurs in safe mode and let us know the results.

  Start your computer in safe mode

  Hope this information is useful.

• When the computer is connected to the TV, computer screen turns off

  When the computer is connected to the tv (cable 15) the monitor of the computer turns off. the only photo is on the tv screen. I have no idea what happened to cause this

  * original title - tv monitor__ *.

  Hi rwertheim,

  Please see the following articles with additional information and troubleshooting:

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  and:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• start the computer in safe mode and appearing automatically jump to the top of websites

  Original title: appearing automatically jump to the top of websites and to hear the mouse click as sounds radomly
   
   
  Microsoft community.
   
  I have essentially two problems in my computer.
  (1) since almost a month my computer automatically goes into safe mode when I pass it on or restart. So, I have to change the user account to come to normal mode.
  (2) in addition to this since 5 days I noticed pop-up program (exactly which is the site web news.net ) in the right corner of my computer screen and it comes with random noise (similar to a mouse-click) that I mentioned earlier.

  I guess this program automatically installed when I tried to download another program almost a week back.

   

  I tried to remove the program using Control Panel, but it is not in the Panel.
  Then I ran a Kaspersky internet security scan (license and currently updated version) that was installed in my computer and then I ran Microsoft security scanner and none of them could picked up a problem.
  So I ran computer more secure mood.
   
  When I tried to clean the boot. I noticed only with safe mode even if the clean boot dialog box appeared options such as ok or cancel orders are not visible or they are absent (or damaged). Here, because I couldn't do the clean boot function properly.
  And I always get that previously mentioned his pop-up at random.
  So I am worrying because this could be the virus and it can harm my computer or your identity. I really appreciate if you can help me in this regard.
  Thank you
  Kind regards.
  Charef

  Please keep us updated on the issue.

  Glad to know that the issue of pop-up got sorted.

  I suggest you try the steps mentioned in http://answers.microsoft.com/en-us/windows/forum/windows_7-system/computer-randomly-goes-into-safe-mode/15444b39-38f5-4f2c-ae2f-a87501ee72ab?msgId=a2eefafd-93c5-4d13-b63b-0fdad30ea2a5

  Let us know the results after trying the steps mentioned in the link.