Office 3522: Not print or copy in true colors

Similar Questions

• C4780 will not print or copy in black; Color looks OK

  HP Photosmart c4780 not print or copy in black. Color seems to print OK. Both cartridges display complete. Problem started after an error message appears that says he has been a failure of the black cartridge. I replaced the black cartridge with a new one.  Alignment printed with only the page surface color - no black areas. Took test page of the HP utility and still printed with surfaces of color only - no black areas. Tried to make a black copy directly on the printer and it acted like it was printing, but just put a page of the Bank. Alignment has tried once again, cleaned heads and a reset (disconnect), but doesn't change anything.  Even after replacing the cartridge completely black again with another new black cartridge, it will still not print from the computer or make a copy of the all-in-one in black.

  I have a Macbook Pro Mac OS X 10.6.8 but these problems occur when you use the HP Photosmart c7180 all-in-one device to make a copy or print a test page.

  Hi SW99.

  The cartridge seems to have a problem. What you can do is to call our technical support at the 800-474-6836 and the agent can determine if the cartridge is defective, and if it is still covered by the warranty date on the cartridge. If defective, and still in warranty, they can then send you a replacement cartridge. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://goo.GL/kQDB

• L7580: HP All In One L7580 - Scans but will not print or copy

  Last problem with the L7580: this machine will scan but not print or copy.  All four color cartridges are good, remaining.  He machine is not used as often as it should be, but copied and printed a few weeks ago.  Any suggestions?  Thanks for any help.

  Hi @kkpb,

  Welcome to the Forums of HP Support!

• F4135 print on screen, but will not print a copy of the glass

  I can not print a copy of a copy, but it can print from the screen image. How can I fix it? He started just after working well for a while.

  I'm glad that you were able to get your printer to start to make a copy once again, Muzzik.  If this proposal does not work, first check all your ink levels.  Black test consists of all colors that come together to make black.  It is a process that occurs when you print from your PC.  The letter 'e' indicates error with your photo in black and.  It could also mean your ink cartridge door is open according to the document below, but then it would print at all if that was the case.

  -Flashing lights-

  Let me know if you have problems with your ink cartridge.  I hope this helps!

• Epson Stylus dx5000 printer/copier/scanner does not print or copy, scan only.

  Original title: epson stylus dx5000 printer/copier/scanner

  This device is not printing or copying.

  This device is only scanning.
  I continue to be told that the spooler does not work, then stop and restart.
  Did it many times.
  Still no results.
  Epson genuine ink in the printer.

  Hi Carolina,.

  1. What is the operating system installed on your computer?

  2. you get any error message?

  Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer. To resolve this problem, use the following methods in the order in which they are presented. If method 1 does not resolve your problem, go to the next method.

  Please follow the methods and check if it works very well.

  Method 1
  Follow the steps from the link:

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2

  Clear printer spooler files and select the spooler service.

  Step 1
  a. Click Start, type "Services.msc" (without the quotation marks) in the Open box and click OK.
  b. double click on "Printer Spooler" in the Services list.
  c. click on stop, and then click OK.
  d. Click Start, type "% WINDIR%\system32\spool\printers" in the opened window and delete all the files in this folder.

  Step 2

  You must be logged on as administrator to perform these steps.
  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. right-click on Print Spooler serviceand then click Properties.
  d. on the general tab, next to startup type, make sure that automatic is selected.
  f. e. the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• My MG6320 will not print a copy.

  My MG6320 will not print a copy.  It will print from my PC and it will scan.  But when I try to print I get an error message telling me that I'm in the paper, but I'm not.  Someone at - it experience something like that or know a solution?

  Thank you

  Hi Rich69427,

  You want to make sure that the size of the page and the type selected in the printer matches the size and type of paper you are trying to copy to try and solve the problem.  To change the size of the page and the type selected when copying, please follow the steps located here.

  I hope this helps!

  It has not responded to your question or problem? Please call or write us using one of the methods on the page contact us for further assistance.

• HP Photosmart C4680 will not print or copy

  Hi all

  My printer does not print (the document is sent to the print queue, but is never printed) and either copy (it just says: "copy" on the screen, but it never does).

  It has been a few months since I use it, but it worked perfectly the last time I did...

  Any suggestions?
  Camy

  Hi Camy_A,

  Thank you for your answer!

  I would try first with our HP print and Scan Doctor .

  So, please take a look at this guide. Printer does not print after upgrading to Windows 7.

  You see another error message when you try to print or copy?

  Hope this information helps and have a great day!

• HP Deskjet 2512: HP Deskjet 2512 not print or copy in black but the color of the works very well

  Help, please. New cartridge. I remove the plastic. It is authentic HP inks. The works of fine color but black wont print or copy and that's what I use most. Aggrivating.

  Sorry it took so long to respond, but whenever I clicked on the link for the doctor to printing and scanning, it says the page has no load but, at random, he began to print in black. I printed the first screen of our conversation, just on the off chance that he himself and it printed fine so I tried a few other documents and all is good-to-go. Thanks a lot for your help! I'll be sure to mark my issue as resolved. Thank you!

  See you soon!

  Patti

• HP wireless all-in-one B110 a: printer will not print or copy, page setting even not

  Less than an hour, printer went from perfect to stop working. Does not print even a correct setting page, this setting is impossible. I swap market several times. How do I return to work?

  Problem solved. It's ink on ink support. After that cleaning printer seems ok.

• Office HP500-590: HP500-590 my office do not print anything until I have restart it.

  I have a HP500 - 590 Energy Star, which I am trying to connect to my old printer HP Officejet 6700. I reinstalled the CD supplied with the printer several times. That did not work. I could not print a test page - until what I restarted the computer. So I tried the printer HP software download. That no longer works. But I could always print everything that I tried to print if I rebooted the computer. To say the least, which is not acceptable. For some reason, the spooler seems to hold the documents without letting go them to the printer until I restart. I don't know if it's an HP computer problem, a problem with printer HP or Microsoft. I don't know what to do to isolate and solve.

  What I see, this is not a problem with the printer itself.

  Run sfc/scannow  in a command prompt to see if that fixes the corruption of the file system as possible.

  When this problem starts after a Windows Update or whatever, and what version of IE are you?

  Go to the Control Panel, Windows Update, updates installed, look for Internet Explorer 11 if it was one of the installed updates. Right-click on Internet Explorer 11, uninstall if it was.

  Restart the computer when you are prompted. Then see if your printer works

• HP Deskjet 3050: deskjet 3050 does not print the JPG files in color - all other documents are printed only in black and white

  Dear all,

  I have a problem with my Printer 3050 Deskjet. (USB connected with my laptop).

  My printer does not print documents colors in color, but only in black and white (with the exception of JPGs (photographs) which are printed in color.

  Word or PDF documents (for example) are always printed in black and white - even if they are in color.

  Copy of pages in color on my printer is not a problem.

  This works perfectly well. The printer is connected to my PC via USB.

  Cartridges (color and black and white) are practically new and original HP cartridges.

  Could the problem be associated I could have changed by accident print settings.

  Thanks in advance for your advice.

  Cheticamp

  Hi Cheticamp,

  In controlling panrl → devices and printers.
  Right-click on the printer and select Printing Preferences.
  Cot the Advanced button and make sure that grayscale printing is set as stop and confirm.

  From within Word, click file > print and click settings.
  You will see the screen Lady printing preferences.
  Press Advanced Options and check the optio grayscale is set as off for Word as well.

  Hope that helps,
  Shlomi

• 5512: 5512 printer will not print black - 3 of all colors print correctly

  Hello

  The 5512 will not print black.  New cartridge installed.  Clean print head run more than 5 times without problem.  There was many 5512 'no black printing problem' not noticed on this forum with many courses of resolution.  I followed the instructions found on so many comments, but unfortunitely, the problem still exist.  I noticed there were some done private view so I don't know that there is a similar problem that needs to be processed offline.  Thanks in advance for any help provided.

  Thank you all for the suggestions.

  Nothing has worked for don't solve the "no black ink.

  So, I took the print head of cart and carefully protected the small circuit board on the back side.  There is a large accumulation of ink on the bottom of the Assembly.  I sat the nozzles at the bottom of the distribution of very hot water and allowed some time to soak.  From there on, I used carefully some fabric material and q-tips to wipe the nozzles.  Then I got very hot water, and he ran to the top of the side of the Assembly to the screens and through the nozzles.  This effort lead to a very large discharge of ink black and color.  I dried the Assembly and reassembled the transport to the printer.  Placed all the cartridges back in, ran clean printhead once and then guess what? the printer now prints black and color inks better than he has in years.

  Total time needed to perform this cleanup was less than 30 minutes from start to finish.

  Good luck to all of you who have this problem.

  Before the rampage of the printer, it is interesting to try this fix.

  Good luck!

• HP 6500 ink cartridge black would not print, now it's the color!

  Had a black cartridge half full, printed the morning very well, does not work in the evening.  Read all the messages on the cleaning of the print head alignment.  Has taken the print head, rinsed off the coast of gunked ink.  Black ink now works great!  But guess what – now the color ink does not print.  Yesterday bought all new cartridges.  Clean the printhead again?  Help!  :-)

  Thus, the color ink levels are good. Could be useful running what a couple of print head clean on the printer and leave it for a few hours.

• My HP Photosmart C5180 all-in-one will not print text correctly in black, color print very well.

  My HP Photosmart C5180 all-in-One does not print black without be eliminated text or streaks in the text. Will print fine text color.

  Have tried all the "patches" you list and much more. The printer prints fine on my old PC Windows XP and worked fine on my

  new PC using Windows 7 until recently.

  Please don't tell me to... Reinstall, download the new driver, install the new cartridge, clean align the print heads, different paper or go to 'solutions '... Etc... Etc.  I HAVE ALREADY BEEN THERE AND DONE THAT!

  Everything you "patches" end with 'the unit of service... " WHAT IN THE WORLD WHAT THAT MEANS!

  This has been a nice printer for more than 5 years, but is somewhat glitch spoil me when using the BLACK INK?

  Gordon,

  Thanks for the reply, expecting not one, but what you say is all that we need to buy another printer if we did all the "fixes", etc... etc. you know that take a printer to a repair shop will cost more

  then buy a new one.

  It was stupid of saying me to check on the warraty of HP page when I already told you that the unit is 5 years old.

  But don't thank you for the reply... even if it was a joke!

• B209-a will not print black, but all other colors, including gray work very well

  When I try to print, all the colors, including gray, print very well, but black does not print.  I tried two new cartridges which do not solve the problem.  Also, I rebooted the computer and the printer and clean the print head.  Printer has two years.  Any ideas for troubleshooting?  I'm on Mac OS X Lion (10.7.5) thank you.

  He has not worked for me, but I thank you for your response.  Looks like it's maybe time for a new printer