Office Jet Pro 8600 N911g: San to the network folder

Similar Questions

• Office Jet Pro 8600 that printing of the iPad

  I am running Linux Ubuntu 12.04 LTS and have recently have not been able to print from it. My printer is the Office Jet Pro 8600, and on the first week I got it Setup print without problem. Now, I can only print from my iPad and when I try to print from my computer it says that it completed the work.

  Hello frashure11!

  About your problem, I suggest you check if you receive the internet signal or uninstall and reinstall your HP printing software again. The reason of why I tell you to do these is because when you try to print wireless, then you know how much you receive signals. For example, if you do not receive the maximum amount of the signal, then the chances are that printing occurs slowly. Sometimes, you can also try to uninstall the printer software and reinstall it again. But before you do that, re - check that your internet connection is to give a signal properly. I prefer lets you choose a password that has a security code, so that you can receive the maximum signal, somewhat, rather than having several people use it. Thus, your internet will go slowly and your impression will slow down.

  I hope this works!

• Office jet Pro 8600: how to change the folder for the scans on my Apple?

  Hi, I want to know how to change the destination for my scans folder when I scan from the printer.  Currently, the scans go to "documents", and I want him to be in a business case.  Clues?  I tried to watch some instructions on the previous posts, but it seems that they are for windows.

  Thanks for the help!

  Hi @jgossc,

  I'd be happy to help you change your scan destination. I understand that when you scan your Officejet Pro 8600 to your Mac, the file analysis is currently underway to your documents and want to let them instead to a business case.

  To change the destination please follow the steps below and let me know the results of your efforts:

  • Open HP utility
  • Select Scan to the computer
  • Click Scan tasks to change
  • Choose a shortcut to scan
  • Select Edition
  • In the options listed here, you should see scan destination

  If this resolves the issue, please click Accept as Solution button below; If not, let me know and I will do everything I can to help. Thank you.

• Office Jet Pro 8600, how to install the full features of MAC OS x 10.8 software.

  Must be able to use all the features of SCANNING (double-sided), but can't seem to find a COMPLETE package of software for OS 10.8 Mountain Lion

  Hi labsinsc2003,

  You can download the SW of full functionality of your product in Lion mountain from the following link: Driver & Software Downloads - HP Officejet Pro 8600 Premium e-All-in-One - N911n

• Office Jet Pro 8600 can not connect the Web Service server.

  Apparently, I need to enter a proxy address. Where can I find details of proxy? I use Windows 7 and I just installed the printer successfully (wireless)

  Thanks in advance!

  KatiaZon,

  We are pursuing.

  Next would be to put a static IP address on the printer.

  To have the information needed to set the static IP address on the printer, press the right arrow on the front panel of the printer > installation > reports > network configuration.

  B. open internet explore and type the IP address of the printer in the address bar, then press on enter.

  The printer's built-in web server should pull up.

  C. click on the network tab upward.
  On the left side, click IPv4 on your connection type, wired or wireless.

  D. change the IP from automatic to manual.
  Enter the same IP address, the default gateway and the subnet mask.
  Enter for the primary dns 8.8.8.8 and 8.8.4.4 secondary, then click on apply.

  E. after is the button clicked apply to apply the static IP settings, enable Web Services.

• Office jet pro 8600 more: Office jet pro 8600 not available in wired networks and wireless

  Have a 8600 JO Plus (CM750A) (N911G), he worked on the wired connection with a static IP address. Then one day she stopped communicating on the cable network. Don't reset to the default values, but still no connection, no activity lights on the connection on the printer's ethernet port. Configure to use the wireless connection. He worked for a while, and then he stopped too much work, could not see it on the wireless network. Reset to the factory settings, yet could not set the wireless connection. She see the SSID of the wireless and allow to enter the password, but would not connect to the wireless network. Now cable and wireless connectivity will not work. I think that the network adapter is broken. What is the OPINION of the Committee of the network so I can order a new one? Connected to USB at the moment and may have a printing station. So OK for now but need a new Board of Directors network. Or any other suggestions on how to connect to wired or wireless. I set factory defaults may times and set a static wired network IP address (which does not stick).

  Hey @John-G1,.

  Welcome to the Forums of HP Support!

  I understand that you are looking for a replacement of the network card for your Officejet 8600 Plus e-All-In-One Printer. It is not a replaceable part. However, if you contact HP support by clicking on this link you can discuss options based on your printer warranty.

  If you appreciate my help, please click on the thumbs up icon. If phone support is able to provide you with any resolution, click on accept solution. The two icons are located below this post.

• Office Jet Pro 8600: Print and scan the doctor

  Will be to print and scan doctor run on Windows 10?

  Hi Gardener2010,

  Yes, print and Scan Doctor is ready Win10!
  Jean

• OfficeJet Pro 8600 n911a - configuration of the network folder

  Hi all!

  I ran into an interesting issue with my Officejet 8600.

  I wanted to network configuration scan to a folder hosted on our server running SBS 2011. We have a generic scan account that has read/write access to the server share, \\server\scans.

  I've set up the folder via the web interface of the printer.

  The problem is that when I test the connection, it always returns the same error: connection failed.

  I tried to use the IP address of the server instead, but nothing helped. I don't know if that helps any, but I see that it immediately gives me error when I use the IP address. When I use the name of the server, it takes a little longer to return the error.

  We use the account analysis for other printers on our network with no problems. I do not see any of what failure of audits on the server event logs, so I don't know if its still knock on the server.

  Any advice?

  BasikStuff, honestly one of the easiest ways to save the scans is that there is a direct Email to Scan app available via web services, which has streamlined save scans a lot.

  However, I would recommend reading this document:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c02588080&prodSeriesId=4214021

  It is written for LaserJet business, but the process should be similar for your printer as well.

  Let me know!

• Office Jet Pro 8600: office jet pro 8600 clear the display

  I have an Office Jet Pro 8600 and need to know if there is a way to fix the screen faded. You don't see the options like print, scan, fax, tools...  It isn't that I know where they are and who's who for the most part.

  In addition, scanning is not clear.  Everything is faded.  However, it still prints and faxes by a fine.  I hope I don't have to buy a new All In One Printer.  I finally got most of the glitches and tricks when I have a problem with it.  Is it possible that there is a light bulb needs to be changed or something?  I appreciate your help & feed back as soon as possible.  I use in an office on a daily basis.

  Kind regards

  Meredith

  Hey @mere4340,

  Welcome to the Forums of HP's Support.

  I see that you have some problems with the copy and see the display on your Officejet 8600 e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once it is, while the printer is on, remove the power cable at the back of the printer for one minute.

  If after the above, that you can't always see the screen or copy clear, the printer needs to be replaced because it has no replaceable bulbs in the scanner or the display. You can contact the HP Support by clicking here and filling out the form below to see what options are available.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Trouble installing the software and the driver for Office Jet Pro 8600

  I get error that "additional software is necessary to continue' when I try to install the software and drivers for my wireless printer Office Jet Pro 8600. I just got a new laptop and had at first no parameter problem the printer and it prints fine, but now for some reason it is not print at all. I tried to restart my laptop and printer several times, but it keeps saying printer offline even if it is connected to my wireless. I followed the recommendation of an assignment that suggests to abolish the printer and reinstall, which is where I am now. Now, I can not install this printer at all by the above error message. Help, please!

  Thank you!

  Hi HSchulz,

  When you try to install with the CD, try installing the latest Windows 7 driver from the HP website. Restart the computer, turn off the printer, then reboot your router and then launch the installation. Here is a direct link to the driver file:

  http://ftp.HP.com/pub/softlib/software12/COL40120/bi-108858-4/OJ8600_1315-1.exe

  Select the connection Wireless option during installation to get the printer on the network and associated with the laptop. Let me know if this helped at all...

  I work on behalf of HP.

• HP Office Jet Pro 8600 help how do I enlarge the print on an original when it is in copy mode?

  I find it on my help screen how do I enlarge the print on a copy of an original document that I want to copy. I have Windows 7 on my computer and printer is HP Office Jet Pro 8600 wireless. I have a printer HP (3 in 1 officejet) before and it was much more user friendly. Is to use the online mode?

  Here is a link to the user manual. To get the possibility to enlarge the copies, press this option on the display of the printer, then tap SETTINGS and then select resize, use the right arrow key to scroll through the sizing options on the printer. Changing the settings of copy is covered on page 59 and 60 in the manual. I hope this helps.

• HP Office Jet Pro 8600: Error Message: Scan in use - wait until the job is done

  Have used my scan function without problem since the purchase of machine and one year on Microsoft Windows 10.  Last week I did some scans - now this week when I try to use my scan function I get the following error message: Scanner is busy.  The scanner is currently in use.  Wait until your previous task is completed, and then try to scan the image.

  -There is no unfinished business and I can't find anywhere to clear the error or erase any task the scanner thinks he's working on.  Has anyone met and solved this problem?

  Thanks in advance for any help you can provide!

  ritao

  Hello

  Thank you for using the HP forum. You can try the following:

  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

  If this does not work, you need to maybe uninstall and reinstall the software COMPLETE features:

  Please uninstall and reinstall the software COMPLETE features, follow these steps:

  1. download and save the software COMPLETE features (do not install online)

  http://support.HP.com/us-en/drivers/selfservice/identify?q=+HP+Office+Jet+Pro+8600&tool=s-002#Z7_3054ICK0K8UDA0AQC11TA930O2

  Before you download, choose the right model, the operating system and complete software functionality.

  2 uninstall the software from your computer
  3. install the FULL feature software "saved".

  Here are some resources for you scan:

  Quick Guide for scanning needs

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/quick-guide-to-your-scanning-needs/m-p/5625126

  Hope that helps!

• How and where can I load legal size paper on the HP Office Jet Pro 8600 Plus?

  I have just purchsed the HP Office Jet Pro 8600 Plus and I wanted to print on legal size paper, but I can't figure out how to do this.  Can anyone help?

  There is a blue tab at the end of the paper tray.  That push and the plateau extends to the legal size.  Hope that helps.  Now what about this one: I want to charge 11 "legal in Tray 1 and tray 2 and, hopefully, the printer will know what bin to shoot when you print legal documents?

• How to choose a print with black ink only on the Office Jet Pro 8600?

  How to choose a print with black ink only on the Office Jet Pro 8600?

  Please read this post then provide some details.   What operating system? For Windows 7, the setting must be in the Advanced tab as shown below.  Note that color ink may still be necessary to avoid that the print head clogged, see here for more information.

  

• Pavilion Intel Core i3 8 GB of RAM: How can I get my HP Office Jet Pro 8600 printer to work using Windows 10?

  With the help of a Microsoft Windows 10 w / a HP Office Jet Pro 8600. How can I get the printer to operate windows 10?

  Hello

  Please download the software package and the following driver and install on your computer (s) 10 of Windows:

  http://ftp.HP.com/pub/softlib/software12/COL40120/bi-108858-4/OJ8600_1315-1.exe

  Kind regards.