OfficeJet Pro 8600 n911a - configuration of the network folder

Similar Questions

• Need help to set up officejet pro 8600 and scanning to the network on OSX Lion folder

  Hello

  I'm trying to implement my Officejet Pro 8600 more scan to a network under OSX Lion folder.  I have correctly set up the printer otherwise (and can scan and flown from my Mac).  I created SMB sharing as described in the documentation.  My only question is what to enter in the Web server of the printer when it asks for the network path of the shared folder.

  For example, I have the following shared folder:

  / Users/me/Documents/scans/Durable goods received

  on my computer that has name is:

  My iMac

  has an IP address:

  172.16.1.4

  wonder web server of the printer a network path (for example: \\mypc\sharedfolder) but I do not know how to translate my way above in the correct format.

  I tried the following:

  AFP://172.16.1.4//users/me/documents/scans/durable------Goods\ recipes

  but he doesn't like it.

  I also tried:

  Recipes of \\172.16.1.4\Users\bvz\Documents\scans\Durable of goods.

  Nothing helps.

  Thanks for any help or ideas!

  Hello

  First of all, make sure to install the latest firmware for the printer.

  SMBX (used by Lion sharing protocol) support added lately, and the device fails to access any forlder Lion shared with an older FW version:

  http://support.HP.com/us-en/document/c02919168

  You have shared the folder durable goods received ?

  If so, I guess the correct path would be as follows:

  \\172.16.1.4\Durable goods received

  Please let me know of any changes,

  Shlomi

• Office Jet Pro 8600 N911g: San to the network folder

  With the help of:

  Office jet 8600Pro N911g

  10.11.5 OS

  Firmware: CKP1CN1545AR (just updated today, Firmware was just posted in the last few weeks)

  Print driver: 4.2.0 (just download today through 'HP Easy Start')

  "Trying to set up' Scan to network folder" and continue to receive "the connection failed". In the past I used SMBUp add on software to scan to folder with the older firmware. After trying all the configurations of the network path, which does not work and receiveing several different reasons does not connect, I turn on the SMBUp and it worked. Turned out and received "the connection failed".

  Installer for the scanning of network:

  Computer name: TGC-IMAC

  Network path: \\TGC-IMAC\HP-SCANS

  It works with SMBUp, but not when it is turned off.

  I tried to set up for a year without the use of SMBUp. I noticed today that the new firmare was available, and he said he would 'improve' Scan to network folder for several versions of the OS 10.

  What Miss me... bad etc.?

  HP you have to work on the development of the configuration software to search for the path to the computer, then 'user guide' in the folder he wants to use. The current guessing game and test has got to go.

  The user community has waited for YEARS for this correction, and now there doesn' t seem to work.

  Any suggestions or comments would be useful, especially from HP.

  Thank you, tom

  Problem solved...

  Came in this AM and I tried the test and it WORKED... The only thing that has changed is the computer and the printer have been turn off and started again. In addition, scanned a document in the affected folder.

• HP Officejet Pro 8600 N911a will not print from Windows 8.1

  I have a HP printer Officejet Pro 8600 N911a that returns the 72234 error code everytime I try to print a document from my Windows 8.1 desktop (HP 1520 t).

  Also, there is a single instance of error code 74899

  The same document prints fine on my Windows 7 Desktop and my Windows 7 Netbook.

  Firmware of the printer is: CLP1CN1416AR

  Firmware from the Support Page of the printer appears as: CLP1CN1322CR (2014-07-18)

  What should I do next to be able to print from my computer Windows 8.1.

  Steve

  Note: This is the first issue I had with this printer that was bought a year ago.

  Hello Steve, I hope you're well

  Thanks for getting back to me with your info!

  Yes, I would first of all, running the wizard of wireless configuration from the front panel of the printer (installation program, Menu, Assistant wireless network), make sure that the printer is connected to your network, then proceed to uninstall the printer, restart the PC and reinstall them both back on your computer.

  I hope that this is the solution!

  Have a great Monday!

• Addressing the memory card SD embarked on my HP Officejet Pro 8600 N911a directly from a PC

  With my 6500APlus the memory card SD has been accessed in my case as http://192.168.0.111 \memory_card but this syntax does not work with the HP Officejet Pro 8600 N911a. Can someone tell me what syntax will work?

  Dean

  Hi deanp,.

  Follow these steps to map the card reader

  1. Insert the memory card into the printer
  2. open my computer
  3. click on network drive mapping
  4 Select the letter of the drive you want and enter the folder \\192.168.0.111\memory_card
  5. click on finish, and the Player opens for access to the files

• HP OfficeJet Pro 8600 N911a, no PC Interface to the printer

  Win 7 Home Premium, 32-bit and 64-bit PCs, wireless connection to the printer OfficeJet Pro 8600 N911a.

  When clicking on the icon of the desktop printer, or to access the HP program in the start menu, MS Notepad opens the interface instead of the interface coding. It's a constant problem since the installation of the software in November 2012. The software has been installed on all three 3 PCs with the disc that came with the printer. All three 3 PCs suffer the same problem of no interface, only Noptpad with the code.

  I uninstalled the drivers and firmware (using Revo) completely and reinstalled from the HP Support download site. The problem remains.

  The interface of Scan function works perfectly in the start menu.

  Other than that, the printer works fine when access to it to print from the sites, as well as the printer works perfectly with all functions when using the control panel touchscreen printer.

  Any suggestions or help appreciated.

  Bob

  Hi Bobhist,

  I understand that you have a 8600 Officejet which is not able to open the wizard in the printer on 3 different computers. I'm sorry to hear what is happening, but I'd be happy to help you!

  I would recommend you have a look through this HP Printer Wizard opens with an error in Script or in Notepad and you should then be able to use everything as planned.

  Hope this helps, have a nice week end

• OfficeJet Pro 8500: Officejet Pro 8500 A910 - unable to access configuration for the network folder screen.

  I can't access my webpage "network folder Setup.

  I can access my page main printer very well using the IP of the printer.   I click on Scan up fine, I then click on "configuration of the network folder" and it tries to load and then goes to a screen "ERR_CONNECTION_TIMED_OUT".

  He warned me the first time that he has been using HTTPS and I approved that.  I currently records on my printer set up awhile back and they work fine but must modify and add a little more.

  I tried multiple computers and devices with the same results.

  Thank you

  Chris Gaines

  MALVERN, AR

  Hello @Cgaines78,

  Thanks for dropping by the HP's Support Forums! I see that you run into issues trying to set up a folder network for your HP Officejet 8500 A910.

  Please continue troubleshooting here: scan to a computer, the e-mail, the device memory or the network folder

  This aid? You are now able to set up a network folder?

  Let me know the results. If this resolves the problem please let others know to mark this message as "accept as Solution".  Just say thank you, please click the ' Thumbs Up ' button. If you need more assistance let me know and I will gladly do whatever I can to help.

• OfficeJet Pro 8600 N911a: N911a of suddenly unable to analyze HP

  I have an Officejet Pro 8600 N911a who, until a few days ago, was fully functional on my home wireless network. I am running Windows 10 on my computer. Out of the blue, the analysis feature has become non-functional 2 days ago, give me a message on the printer that the function computer scanning was enabled on the computer. Unable to solve this problem through managing the digitization of printing software to computer section, I finally uninstalled the HP software and downloaded the full setting software and driver package on the HP site for a new installation and configuration. I have had no problem adding the printer and its connection to the network through devices and printers in Control Panel 10. As before, I can print without problem, but when I try to scan, the printer status screen informs me that the function computer scanning must be enabled via the printer software. My current situation is that when I run the printing software, it goes immediately to the printer configuration screen and then hangs on 'check the network environment,' let me do the software already installed. So it seems to me went from bad to worse, because I have more access to the software is of the other features, such as ink cartridge levels. I looked online for a solution for 2 days now without success, any suggestions would be greatly appreciated. Thank you.

  Good news! Rerun the Print and Scan doctor was a complete and utter success! The printer is now on the network with full functionality restored, as well as for printing, as well as windows. Sunshyn2005, I can't thank you enough for the time and effort that you put into this! Thank you very much!!!

• Cannot update firmware for Officejet Pro 8600 N911a

  I can't upgrade the firmware in my Officejet Pro 8600 N911a.  My current firmware is CKP1CN1416AR.  According to the HP drivers website, the latest firmware is CLP1CN1322CR.  I get the update to run and it identifies my printer, but it won't let me select it.  I use the printer on a wireless network, but I'm trying to run the update of the firmware via USB.  Any help would be appreciated.

  Sunshyn2005,

  Please provide information on this issue.

  Apparently, the problem that your customers have is that they are wasting their time trying to update the firmware on their printers and after a few hours of frustration they finally know that HP has a firmware update file on its Web site that has a date that is much newer than the firmware itself.

  HP should do the following to make the process less frustrating firmware update:

  1. establish dates and version numbers in the file metadata which clearly indicate what firmware file is more recent.

  2. keep the HP web site up-to-date with the latest versions of firmware.

  3 Broudly and transparent announce to the public when an update will be made and why.

  4. establish technology so that firmware can be updated on wireless links so that the networks do not have to be reconfigured to make the firmware updates.

• HP Officejet Pro 8600 N911a: Default community names

  Hello could someody help me know if its possible to change the default community for all the printers?

  This is because it is considered as a vulnerability by CVE

  HP Color LaserJet CPImpresor. 3525

  HP Officejet Pro 8600 N911a

  Thank you very much

  I suspect that @jfba done refers to the SNMP community name, not the name of the printerto Windows .

  I have no idea if this can be changed on the Officejet Pro 8600 printers; LaserJet 400 Pro M475dn, the value can be changed via the Integrated Web server interface:

  

• HP Officejet Pro 8600 N911a: can not save scanned documents

  button to scan save the docs is grayed out after the scan is finished and ready to save the step

  Hi @orthoman,

  Thank you for joining the HP Forums!

  I understand that you cannot save documents scanned with your HP Officejet Pro 8600 N911a printer. I'm happy to help you!

  Please take a look at this guide, the printer Scan fails or impossible to scan allow (macOS Sierra).

  Do not forget to return to this topic and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Hope this guide helps!

• HP Officejet Pro 8600 N911A: firmware

  I have a HP Officejet Pro 8600 N911a

  Serial No. [personal information]

  Product # CN578A

  Service ID: 23174

  Firmware version: CLP1CN1435AR

  QUESTION: Is the original firmware that came pre-installed on this printer purchased on 06/23/13.

  To be honest, I had problems with the operation of the printers over time, successfully resolved.

  I am led to understand that a later version of its Firmware is available. If that is correct, do I need?

  What are its advantages? How I did it acquire? Will receive installation instructions?

  There are further problems with the new Firmware? Thank you in advance for your help!

  ultimately, here's what happens: I had the chance to find a link on the site of "BD" that has allowed to circumvent the 'salary aid Tech' (involved only) help. For linking real chat... I got a tech, explained what was going on, he asked me to open Bitdefender a page says, asked what he's been selected... then instructed me to change about 3 settings. "BD" to close and reopen it... then try to access then asked me to test the "computer scan"... It worked like a charm! Apparently, BD software with the settings of the Moose saw an intrusion unauthorised and killed the linlk from computer to printer/scanner and killed the link.

  Once, I didn't know what to do in the future, everything worked fine... I can't tell you how many hours I spent with other BD technicians and HP is trying to solve this problem.  So, now I can place a document (etc.) on the printer scan window, go back to my computer open the link and the Voirledocument and adjust the scan size, part of the image, size and other graphic possibilities.    Because by sheer luck, I found a link to chat with a technician who knew their product and in a few minutes (not hours) directed me to a resolution that no cost me $ $ no matter what.

  Than k you, Lucien of Bit Defender!

  FORGET THE TECHNICIANS 'FEE' OF THE PHILIPPINES... (FOR REASONS I will not GO IN, I'M FLUENT IN 2 DIALECTS OF THE FILIPINO LANGUAGE - TAGALOG & ILANCANO), EVEN WITH THAT HAVE TOOL, HP 'TECH' could FIND THE TOILET WITH A TORCH!

  Message to MEG WHitman... Unload your stock, sell the House and get out of here before its TOO LATE.

  Even a deaf, dumb and blind person can comprhend this situation... Fill in the blanks...

• HP OfficeJet Pro 8600 N911a - two-sided copies

  I'm eager to take a two originals face and make a copy of both sides.  When I press the ECO button it says that this option is disabled.  I can't understand how to turn it on.

  Hello chogan

  The ADF on the Officejet Pro 8600 N911a doesn't have the possibility to make a double-sided copy. This is because the ADF doesn't have a duplex unit to get the original in paper and flip so that the other side can be copied.

  You can make copies front and back of the dumpster by setting the option and flipping the page once the first side is copied.

• My new HP Officejet Pro 8600 N911a does not allow a webscan

  My new HP Officejet Pro 8600 N911a does not allow a webscan on my laptop Dell Win7, which indicates on its Web page ¨that that the corresponding software is not installed".  I already tried in vain to install all software from the included cd, but did not find the corresponding software.  I was surprised to see that this cd does not start by itself, the single executable that I found was a setupxxx.exe and that did not include the scanning options.

  Anyone has a suggestion to solve this?

  Hello tutoke

  The Webscan must be selected in the tab of the administrator of the Embeded Web Server (EWS). See the screenshot below.

  1. Click settings
  2. Click the administrator settings
  3. Check Webscan
  4. Press on apply downstairs.

  Try to scan the image.

  

• several vertical black lines trying to copy using automatic power HP Officejet Pro 8600 N911a

  30 - 40 randomly spaced verical lines length of page when you try to copy using automatic feeder

  The document here can help solve the black lines to scan using the ADF on your HP Officejet Pro 8600 n911a.