OfficeJet 4500: officejet 4500 print is blurred

Similar Questions

• HP Officejet 4500 printer problems

  I just installed a HP Officejet 4500 printer and I have lost any link help me plesae usb ports because HP could not?

  Hello

  Make sure you have the latest vista drivers for your computer which you can get your computer manufacturers Web site

  go to their website and look for a driver and software download section

  Enter your model number for the last look drivers vista then download and install

• My HP Officejet 4500 printer install problem

  My HP Officejet 4500 printer keep installation on HP Pavilion dv6 workstation even if it is already installed all day

  The installation process is probably a failure at one point causing an incomplete installation. Have you tried to do a complete uninstall and reinstall process? If you have any software virus protection try disabling the installation just to limit background probably interfere the installation process applications.

• 4500:4500 printer can work for faxes wireless

  My 4500 printer is set up the fax function calls to a wall outlet for a local network without wire-line - I don't have a wall outlet

  all my phones have WiFi in the House - 4500 fax can be defined in wireless or not.

  I have checked the web and have not found an answer - all I need to know if the fax works wirless

  N °

  The fax must be connected to an active telephone line with a work phone cable.

  See the instructions below to connect the fax:

  http://support.HP.com/us-en/product/HP-OfficeJet-4500-all-in-one-printer-series---G5/3919445/model/3919446/document/c01968837/

• HP officejet 6978 all in a single p: hp officejet 6978 printer all in one, appearing to create its own wifi signal

  After I had my printer connected and working properly, I looked in my wireless options to connect to the internet. I have hooked the fine, but in these choices, was a connection option in/with? a hp officejet 6978 printer all-in-one. Before you buy and hanging upwards, connect this option was not there. Now, this is the case and showing a stronger than my router signal. This printer is able to be a wifi connection? Any ideas?

  That's great. I see nothing in the instructions, and the seller does not mention either. It seems to me that this feature would be another selling point. I do not necessarily want to disable it. I like the idea of having him as a backup, if my current one falls down, would only be an option? If so, I tried to connect using pw of my router, but cannot connect. This would have a default PW? is so, how do I find it. So thanks for your help. As I said nothing even alluded to this function...

• HP Officejet 5740: The Officejet 5740 printer is sending a document feeder of error message cannot read original documents

  HP Officejet 5740 printer sends an error message indicating that the document feeder could not recover the original document.

  Hi @angelahouser042,.

  Welcome to the Forums of HP Support!

  I see that you have problems in your ADF on your HP Officejet 5740 e-all-in-one printer. I will definitely do my best to help you and don't forget to come back to this thread and mark "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I recommend that you follow the steps in this guide:

  • "HP ENVY 7640, 5740 Officejet and Officejet 8040 e - all-in - One Printer Series - a Message ' Out of paper ' is displayed on the control panel and the printer doesn't pick up paper

  Please follow: step 3: clean the ADF rollers and separator (optional) buffer.

  Hope that answers your question. Please reply to this message with the results. Thank you for posting!

• 4500 envy: Envy 4500 printer not

  So my Envy 4500 printer worked very well on the network for more than a year, but last week we had our wifi router change and since it does not print. Well, it prints, but you must put the printer off, then put it back and it will print only the first document in the queue (it will not print, you must do the same thing) I tried to make my pc and it says that "a document in the queue block printing" or something like that and it removes the document but if you try to reprint it does the same thing thing. It's really annoying to toggle the printer for each document... Thank you

  Hello
  
  Thank you for using the forum. You can try the following:
  
  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem
  
  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926 & h_lang = on & h_client = s-h-E016-1 & h_keyword = DG - PDU
  
  Hope that helps.

• HP Envy 4500: Print jobs disappear from the print queue and not print (Windows 7).

  I just bought a HP Envy 4500 printer,

  When you attempt to print from a PC with windows 7 OS home pro (64-bit), the print job appears in the queue and then disappears, but the printer does not print anything.

  Everything else seems to work very well know

  • The printer prints the internal test page
  • The printer does print when you use iPad2
  • The printer does print when you use ePrint
  • The PC recognizes and communicates with the printer (tried with USB connections and wireless)
  • Analysis feature works very well - when initiated from the PC and printer

  I tried

  • uninstalling and reinstalling the software (several times using software from different sources)
  • restart the printer queue service
  • Disabling the firewall
  • running printing HP and doctor Scan
  • following the instructions described here (the question is the same but the different operating system):

  Print jobs disappear from the print queue and print (Windows 8)

  • combinations of all of the above

  Absolutely no joy in any of them, and in spite of more than 2 hours of research on Google and forums search I can't find a solution.

  HP... can you give me a solution or is that goes back to the shop?

  Well I finally worked on the fix myself by trial and error.  I changed the security settings for 'All' and 'Creator owner' to 'Print' and "Administer Documents".  Why on earth they were not automatically allowed as part of the installation, I couldn't really say.

  Hope this helps someone else with a similar problem.

• Install HP Officejet 6310, printer all in one

  I loaded and began to run the instalation of the complete software for the HP Officejet 6310 printer all-in-one on my new Dell Inspiron N7110 Notebooks. It runs Windows 7-64 bit. After the end of the excerpt, it stops just running. It should go in the installation process, but it doesn't. Can someone help me?

  See if you can find the folder of extraction of HP that he created, then run the installer in there.

• HP Envy 4500 printer all in one

  My Hp Envy 4500 printer all-in-one lights up not down IT. If I unplug the power cord, then plug it back it then the printer lights for about 14 seconds and then turns off.  Any ideas?

  Open the link: www.hp.com/contacthp/
  Enter your product number or select Auto detection
  Scroll up to "still need help? Fill out the form to select your contact options.
  Scroll down and click on: contact HP options - click Get phone number
  A file number and phone number will be displayed.

• HP Officejet 4355 printer suddenly start very slow printing! HP technician advice needed!

  Hello
  My all-in-one HP Officejet 4355 printer start suddenly feel very very slow! I've had it for 4 years, and God never gave me any problems (maybe minor once, but never really made me mad), as I used it very often at home and at the office. I always buy the HP original ink cartridge (only once, when I wanted to see how works the charging - it's not) and now the last cartridge has been in the printer for a month or two, nothing unusual, and suddenly my printer starts to print very very slow, if normally it took 10-15 sec for a black and white page now it will take 10 to 15 minutes. Could someone suggest help?
  Please don't talk about the computer/Windows/USB settings, they all work very well. I unplugged the printer from the PC and don't "align the print cartridge. First step, the printed area, took 10 minutes, second step, part of scanning, does not pass. It says printer cannot allocate the alignment page...
  Moreover, I did look around for answers and found that some people say it's a fault of the ink cartridge. But I used this cartridge for a few months now, it's almost, but not yet finished, it was perfectly up to printing. Impressions during this issue come out OK, 7 out of 10.
  Anyone have any ideas? If I could attract professional assistance of technicians of HP, it would be perfect.
  
  Thank you.

  © RedStarLimitless ©

  Although they still ink cartridge may fail and give the results you see, where the printer made a bandage and wait 10-15 seconds for the next Strip. This is caused by the failure of one of your cartridges.  Remove each cartridge and clean the contacts on the cartridge and printer can solve the problem.

  I don't remember if the Officejet 4355 reserve mode supports, but try the following: remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

• OfficeJet 4622 prints not Windows 8, but will print from Linux

  Hello world

  I have an OfficeJet-4622 printer set up on my network (wireless) and two computers. The first is a portable computer running Windows 8, and the second is a desktop running Ubuntu Linux. Both have HP (and HP Setup) drivers installed. When I try to print something from the Windows 8, it will start printing and then say that year error has occurred. The print will be print part of a page, nothing or half of employment and a white sheet.

  However, if 'copy' of the printer, or print from the Linux computer, everything works fine. One thing to note is that I'm using remanufactured cartridges, but they should not cause a problem on a single computer only.

  I am at a loss here, so any suggestions on what to do to solve this problem are greatly appreciated.

  Thank you and have a nice day.
  Patrick.

  I think I solved the problem eventually. On one of the posts of post-its, it linked to a page where you can use the automatic installation wizard. I did, and it reinstalled my driver (s). He had said the previous installation was not completed successfully. So I'll try again to print. The print came out fine. If the previous installation must have been the problem.

• HP officejet 6500: HP officejet 6500 printer

  My HP officejet 6500 printer do not print one color... .we just put new ones in... He took command of printing and the paper comes out of the Virgin.

  I went to the HP support team and they had a video to help with "Troubleshooting", they showed me how to reset my printer.  There were several options which I had already tried... so I did the reset partial... .or you unplug and wait 20 min... then hold it at the same time # and number 3 and reconnect the power chord at the same time... It took 7 minutes for the printer run the test of the colours that mine passed... and my printer works now!   Thank you very much.   HP team

  Ma-donna

• OfficeJet 4620: printer keeps going offline

  OfficeJet 4620 - printer keeps going offline.  If I turn it on and turn it on, it's online for a while, but it disconnects again.  My IPad can't print on it. My Windows laptop, 10 shows as offline.  I can open his web page by entering the IP address in a browser and can ping it, but it also shows offline.  It is very annoying to have to reset the printer whenever I want to print to it wireless.  Is this to say that the wireless antenna is going wrong?  Should I buy a new printer?

  I found what caused my problem when troubleshooting the installation of a new printer. I have 2 range Extenders. They had the same ssid as my router. One of the reports of tests of the new printer had a warning about it. I changed the range extenders in order to have all 3 different SSID. Now when the ipad & printer are that both connected using the ssid for the range extender in the room with the printer, there is no problem of ipad impression. My old printer is fine.

• HP Envy 4500: Printer says it has solid network connection, but cannot connect to the internet

  So I have not been able to use my printer wireless lately, so I decided to check if it was connected to my wireless network. It is; I checked, re-connected and checked several times. So I decided to reactivate my web services. I have them turned off, and now whenever I press the button on the printer ePrint, it says connection for a really long time and then displays the message in the sense of "the printer cannot connect to the server. Check the internet connection and proxy settings.

  I have re-connected the printer to my wireless network, I checked that if I use a proxy server (I'm not), I used the HP print and Scan Doctor - just, it won't just matter what I do.

  All I can think about is the fact that I have recently purchsed a new router, but says that its connected which is what really stem me.

  This printer makes me crazy - please help

  Hi @mastersword64,

  Welcome to the HP community!

  I hope you have a pleasant experience with us.

  I want to help you with the connection error, you get on your e-all-in-one of HP ENVY 4500 printer when you try to enable web services.

  Here are some steps, I suggest trying to get your web services up and running it again:

  Network Power Reset:

  We'll leave the router and unplug the power cable (NOTE: do not reset the router.), and then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  Restore the default settings of the network and reconnect:

  1. on the front panel of the printer, press your up wireless icon

  2. Select settings.

  3. Select restore default network settings.

  4 turn on your printer.

  5. once it is initialized to save, press the wireless icon again.

  6. Select settings.

  7. Select Wireless Assistant , and then follow the prompts to enter the details of your wireless network.

  8. try to activate the web services again.

  Configure a manual DNS for your printer:

  1 obtain the IP address of your printer

  a. This can be done by pressing the icon on the printer wireless.

  2. Enter the printer's IP address in a browser on your computer.

  3. Select the tab network at the top of the page.

  4. on the left, select network.

  5. Select network address (IP)

  6. Select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  7. Select apply. You can get a warning simply select OK.

  Please reply to let me know if these steps resolve your issue.

  Good luck!