Officejet 4500 wireless problem paper jam

Similar Questions

• HP Officejet 6500 Wireless message paper jam

  Message from jam paper HP Officejet 6500 Wireless, no jam, cart moves

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01312792&LC=en&DLC=&cc=us&product=3795406#N666

• Problems of mismatch paper HP Officejet 4500 Wireless

  Hey! I really hope you can help! I have a HP Officejet 4500 Wireless printer connected via my router wireless running on Windows Vista and it will not copy correctly. When I put something on the glass to copy, it says "Error" wrong paper size. Load different media or change the copy paper size settings. "Even using the solution Center HP did not help. When I used the solution Center, the only printed on 1/4 of the book. I'm so frustrated by that and I can't fix it!

  Hey Zaysmom. There are a few different reasons this can happen. First, insert a new stack of paper in the paper tray. If she printer identifies an incorrect paper size or no paper at all, it can cause this message. This only happens when scanning?

  Try to run the doctor printing & scanning HP to see if it is able to solve your problem. If it does not solve the problem, post back with new details and will continue from there.

  Thank you!

  Sean

• Problems installing HP Officejet 4500 Wireless

  I can't install the driver for my printer on a Toshiba laptop

  Hi Ram,

  1. what happens when you try to install the drivers? You receive messages or error codes?

  2 Windows operating system you are using?

  You can see the following HP support article and try to install the latest version of the drivers for the printer and check.

  Software & Driver Downloads - HP Officejet 4500 Wireless All-- One Printer - G510n in

  Also see the following article:

  Wireless Printer Installation troubleshooting

  You can also read the following article and try to run the troubleshooter and check.

  Printer in Windows problems

  If you use Windows 7, then you can consult the following articles:

  Install a printer

  Find and install printer drivers in Windows 7

• HP OfficeJet 4500 Wireless: lack the hpsupportsolutionsframework.msi file may not install/uninstall

  I got caught by the Windows default update from 7 to 10.

  10 was a little bug, but I gave him a few weeks to see if it could be arranged.

  Yesterday, I got a notice from HP that I needed to upgrade my printer software, so I did, which was my mistake, it seems.

  The upgrade process didn't go smoothly and in the end, I had no way to access my printer/scanner, the HP solution Center which I use to make my scanner was gone.

  It's been half a day trying to solve this problem, including downgrading to Windows 7 and to uninstall and reinstall the printer software, but nothing works.

  A critical issue seems to be an error message I get that said file hpsupportsolutionsframework.msi is missing from the temp/local directory.

  So, how do you return this file?

  At this point, I'm pretty disappointed with HP, because I just followed the advice you guys to make a necessary upgrade.  everything worked fine before this.

  Hey @Hermitaño

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the software for your Officejet 4500 Wireless all-in-One Printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Click Start and in the bar look in %Temp%, and then press ENTER.
  2. In this folder, find the folder whose name starts with 7Z.
  3. Open the folder util/ccc.
  4. Run L3_uninstall.bat.
  5. Restart your PC.
  6. Download and install the latest drivers for your printer by clicking on this link.

  Please let me know the results after following the above. If you can print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• I have a HP 620 laptop computer and a printer OfficeJet 4500 wireless. I can print wireless, but when I go to HP for Solutions to scan a document, it tells me that the printer is disconnected.

  I have a HP 620 laptop computer and a printer OfficeJet 4500 wireless.  I can print wireless, but when I go to HP for Solutions to scan a document, it tells me that the printer is disconnected.  There is nothing I can do to Solutions of HP to recognize the printer.  What causes this problem?

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP - OfficeJet 4500 Wireless - drivers<- set="" to="" your="" version="" of="">
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3986399&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP - OfficeJet 4500 Wireless - support and troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=3986399&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Error: The computer cannot communicate with the printer; printers HP officejet 4500 wireless all-in-one

  Original title: hp officejet 4500 wireless all-in-one printer / moved, unplugged and replugged and then in the new House when turned on laptop hp, now it will not find printer

  I need help with getting my hp laptop to communicate with my printer hp officejet 4500 wireless all-in-one, I moved and when I unpluggled everything and moved, when I tried to print something now my computer says it can not communicate with my printer, even if in the control panel it shows my printer has been verified as my default printer I don't know what to do?

  Hello
   
  What is the version of Windows installed on the computer? For example, Windows 7, Vista, XP
   

  Please answer the question above so that we can better guide you.

  For now, you can read the following article.
   

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  Check if it helps.

• Cannot print from broadcast with driver Hp Officejet 4500 wireless

  Original title problems: Hp Officejet

  My Hp Officejet 4500 wireles doen't print from another computer. I ran the diagnostic of the printer and am told that my computer doesn't have the right driver

  for my HP Officejet 4500 wireless.

  Hello

  1. what operating system is installed on the computer?

  You can download the drivers for the printer based on your operating system from the link provided below.

  Software & Driver Downloads HP Officejet 4500 all-in-One printer - G510a

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3919448

  For more information about troubleshooting steps, see:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• My officejet 4500 wireless keeps stopping when I turn it on

  When I turn on my officejet 4500 wireless it starts to warm up and then stops.

  This could be a problem with the power supply for this printer. Check the steps in the document located here, for the procedure to troubleshoot a 4500 which won't turn on.

  I hope this helps.

• HP Officejet 4500: hp officejet 4500 wireless

  I have a HP Officejet 4500 printer, not wireless.  If I wanted to update to make a wireless device would be I just need to add the wireless card and the appropriate wireless control panel or do I need to replace the entire motherboard and then add the wireless card and the appropriate wireless control panel?  If this isn't the case, that would I need?  Thank you!

  Hi @codycubby,

  Welcome to the Forums of HP Support!

  I understand that you're curious, if you can make your HP Officejet 4500 wireless printer. I will definitely do my best to help you and don't forget to come back to this thread and mark "Accept as Solution", if I have successfully helped solve you the problem.

  In order for me to help you better, I will need more information.

  What is the name and the product number of your printer?

  HP Officejet 4500 All - in - One Printer series - K710

• Poster printer constantly turn the power off then on again. OfficeJet 4500 wireless on Windows 7

  New installation of HP Officejet 4500 Wireless on Dell Inspiron running Windows 7 Professional.

  I can't past the message on the printer then "shut off".

  I tried unplugging all the cables on hold and reconnecting repeatedly and in various orders, but without result.

  I find HP help impenetrable to user pages quite a novice.

  Can anyone offer a solution please

  Thank you very much

  Ted

  Hi Tedlngle,

  Remove the cartridges from the printer and then unplug the printer for 1 to 3 minutes, and then plug the printer back. Make sure that the power is connected directly to the wall outlet. Follow the instructions on the screen to the printer to reinstall the ink cartridges and let me know if you have the same problem?

• HP OfficeJet 4500 Wireless - cannot set up wireless (UDP Port 427 related issue)

  I just bought a HP Officejet 4500 Wireless printer... The problem is setting up this printer wireless function is therefore not the case!

  Whenever I go through the set up I get this response:

  "Your computer is unable to communicate with your printer at 192.168.0.8. This can be the result of firewall software. If you use firewall software, make sure that the 427 UDP port is unlocked for the incoming and outgoing traffic. Your PC cannot communicate with your printer at address 192.168.0.8. Check all cable connections. Make sure the printer and the PC and the router are powered on and connected to the network. »

  How can I fix it?

  I am running

  OS - Windows 7

  Windows Firewall, packet of Defender etc.

  My only additional security is a free package of AVG.

  Please help as he rolls me and my dad nuts!

  :(

  Hello

  Method 1:

  I suggest you to go through the steps in the link and check it out.

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Method 2:

  Disable the firewall and check.

  The Windows Firewall is enabled by default in this version of Windows. To make sure that it has not been disabled, follow these steps:

  a. open the Windows Firewall by clicking the Start button, then Control Panel. In the search box, type firewall and then click Windows Firewall.

  b. in the left pane, click turn on or off Windows Firewall. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. under each network location type, click on disable Windows Firewall and then click OK. We recommend that you turn on the firewall for all network location types.

  For more information, visit the following link:

  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-Firewall-settings

  Important: Don't forget to turn on the firewall once the diagnosis is made.

  Method 3:

  NETWORK PRINTING CONFIGURATION PAGE

  
  a. Press setup, then scroll to the bottom and look for network.
  b. press OK on the network, it will give you the first option 'display network settings '.
  c. press OK on it, and it will give you the first option "print network configuration page."
  d. choose who and press OK. It will display the network configuration page. This document, you will be able to see the IP address of the printer

  Print a network configuration page and note the IP address of the printer.

  a. now open the printer folder and check the icon of the printer with a checkmark on it, and the bed ready state.
  b. right-click on the printer icon and select Properties.
  c. select ports tab and click on configure port and enter the same IP address and try to print that would settle the matter.

  See also:

  Manuals for HP Officejet 4500 Wireless all-in-One Printer - G510n

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&LC=en&DLC=en&document=&product=3986399

  Hope this helps and keep us posted.

• OfficeJet 4500 Wireless - MacBook it installs with USB, but can't find it on the network

  Help! I just bought a new MacBook (OS 10.6.4) and try to use the HP Officejet 4500 Wireless with it. I bought the printer a month or two ago and it has been implemented on my wireless (a Netgear - WNR2000 router) and works very well with my old iBook G4 and the Windows PC at home. My new MacBook is connected to the fine of the Internet, but when I went to use the printer, it seems to install ok, make settings IP etc. of the printer on the network, but it's not far past. He says that the printer is "unreachable" or some such nonsense and refuses to see it on the network. I tried both with and without the CD installation, and after you have uninstalled the software HP to uninstall and reinstall in the system of preferences--> Print and Fax settings. But he only sees the printer if I connect it with USB, which goes against the reason for which I bought it.

  I ran the software update and it has found a new version of the software to download to the printer when connected via USB. But there seems to be no way to convince him to find the printer on our network wireless

  Any ideas?

  -Mary

  Wow - I solved the problem. How ridiculous of a solution is that?

  I saw a mention on another Board need to have a SSID for the network of less than 6 characters/letters to get the Mac to work with some other printer/router configuration.

  So I tried here - since I had a network SSID of 7 letters.

  (1) I went in my screen to config the router and changed my SSID to one that was only four letters. I also took the static IP address for the printer, I had just set up (so for those of you watching at home, ignore my comment on this tactic, it was a herring!) leave the settings as they were before I ate with it.

  (2) I then restarted the router, the computer and the printer.

  (3) I first put in place the new SSID on Mac (change the SSID of the router to the old password only left, so it was just a matter of returning the password on Mac, when it entered into the 'new' network). I checked this by seeing in screen config the router if the Netgear now he showed in his list of connected devices (it wasn't before, and I was suspicious that he was some other weird problem, if the Mac has used the Internet very well). He did it!

  (4) then I used the front panel of the printer to go into Options--> Menu Wireless--> Setup Wizard and configure the printer again on the new name of the network SSID. Then I went to the Options--> Print the report--> Config network. It would therefore be to print a page giving the State of the connection confirming that it was the network.

  (5) then I went back for the Mac and use it again the screen of the router config I confirmed that now the printer was also showing up on top of the screen of connected devices (it wasn't before, now she and Mac have been listed!). Then I opened system--> print and fax preferences and tried to add the printer again. This time he finds immediately on the network (using the so-called Hello?), and since I already had the software update (using the steps suggested above) that she already had the correct printer software to use. Wireless printing fine now... After all this noise.

  So, apparently, PrintDoc, you need to add a small little by this spiel you gave me above - to install a printer wireless on a new Mac with a working wireless network (at least one with a Netgear WNR2000 router), the SSID of the network should really be only a couple of long letters (4A worked in this case but not 7). Why, I have no idea. Ridiculous, like I said.

  Thanks anyway.

  I hope this discovery helps someone else too!

  -Mary

• How to print from iPhone / iPad for Officejet 4500 Wireless printer?

  I would like to print from my iPhone / iPad on my Officejet 4500 Wireless printer.  Y at - it an iTunes app I need to download?  My printer works fine print wirelessly from my desktop, just do not know how to print from my iPhone / iPad.  From what I read, it seems that this printer is not enabled for Airprint.

  Hello

  You can print from iOS using HP ePrint home & Biz.

  You can find more details below:

  http://support.HP.com/us-en/document/c02775166

  Kind regards

  Shlomi

• HP officejet 4500 wireless: connecting hp officejet 4500 wireless to my Pavilion

  I had to have my restored computer do to a virus. Now, I need to reconnect my printer wireless? This is where I need help. MY printer is a hp officejet 4500 wireless and my computer is a hp pavilion touchsmart sleekbook. My operating system is windows 8, but I don't know if it's 32 or 64?

  Hi @5839, welcome to the HP community there.

  I read your post about how you had your computer restored and now install your Officejet 4500 Wireless turn it on for your system!

  I can certainly help you!

  Click on this link to get the drivers and download the software you need to run your printer to install again through having: software HP Officejet full feature and driver

  I hope this helps you, if you need help, please let me know!

  If you like my answer to your concern today, click on the thumb upward below!

  Have a wonderful Monday!