OfficeJet 4620: Officejet 4620 2 colorful money of the tension springs located behind the printer cartridges

Similar Questions

• HP Officejet J4580 all-in-One: where the printer cartridges are located

  Where are the cartridges of printers that are located on the HP Oficejet J4580 all-in-One printer

  The ink cartridges are located inside the printer. Go here... http://support.HP.com/us-en/product/HP-OfficeJet-J4000-all-in-one-printer-series/3645081/model/3645099/manuals download the User Guide and read page 10 for see where.

• HP Officejet 8625: AirPrint broken after updating the printer itself

  Our printer has worked successfully with multiple devices i two Macs and a pc.

  My daughter has allowed the printer install an update of last week and it no longer works via the wireless network or via AirPrint (devices does not detect the printer, cannot connect mac).

  If I plug it in with the USB cable, I can print with my Mac. The system is normally with most devices using AirPrint wireless to access the printer (my Mac included; "I think he uses theough Hello AirPrint).

  I have reset the printer by default, it unplugged for a while, restarted several devices. It worked fine until the HP update.

  Hello @spruitts,

  Welcome to the forums of HP.

  I understand that you have a problem printing with your Officejet 8625 after the firmware update.

  I would like to help.

  You cannot print wireless, but you can print via USB. It makes me feel like the question is associated.

  I would just make some network problems, deciding that something is wrong with the printers firmware.

  Try to go through the following documents.

  Cannot print with a Mobile Apple device using Apple Airprint for the HP Officejet Pro 8610, 8620, 8630

  HP printers - printer keeps no connection Wi - Fi

  If you wish, you can always call our technical support at the 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• HP Officejet Pro K550: Software to clean the print head

  I need tool box for old HP printer: HP Officejet Pro K550, for 10-64 bit Windows.
  I need a software tool to clean the print head!

  Hello

  The HP Toolbox software is no longer available for your printer for any later OS such as Windows 7, 8 or 10:

  http://support.HP.com/in-en/document/c03467279

  You can align, clean and calibrate the printhead from the printer itself by using key press combinations.

  See page 33 on its manul below to perform all the tasks of cleaning for the front panel of the printer, such as the cleaning of the printheads:

  http://h10032.www1.HP.com/CTG/manual/c00501024.PDF

  Kind regards

  Shlomi

• OfficeJet 5740 e-all-in-one: the printer display shows 'downloading' message despite no web service implemented

  I got a new Officejet 5740 e-all-in-one and put in place a few days ago. It is implemented in a router which is also a modem.  I've implemented any web service.  My network is password protected, and I'm the only one on this subject.

  A couple of times I arrived in front of the printer and there was a screen that says that there is a current download, and he showed the percent completed. This surprised me because I have not implemented in web services for the printer.

  I cancelled the download, both times.  The second time I accidentally typed the screen again.  I don't know what button I hit, but it has printed a message that says that my printer is now web enabled.  He also says that my printer has an email address.

  I went into the web installer, and it seemed to me that I had not implemented the web.

  1. what could it possibly download?

  2. If it does not complete a download while I'm not looking for, will there be a record of this?

  Hi @Andrew111,

  Thanks for joining the Forums of HP Support for a solution to your printer problem.

  I understand that you use a 5740 Officejet from HP printer e-all-in-one with a computer of Windows 7 and you noticed that the screen of the printer said there was a current download, which you surprised because you but you did not set up web services. I would like to help with that.

  You mentioned that the printer has its own e-mail address. Web services have been enabled for the printer to have an address of mail @hpeprint.com. It is possible to disable the ePrint and printable HP once the HP Web Services has been enabled.

  The download that was underway was probably a printer update, which will come by automatically. Nothing to do with the computer. I don't think there is a record of updates of the printer anywhere.

  Please let me know if that answers your question...

• HP Officejet Pro 8620: iPad connects to the printer

  My iPad 2 Air do not print to my HP Officejet Pro 8620 although my iPhone 6 prints very well so I don't know the connection Internet is good and the printer works

  Hello

  He recently lost connection or is this the first time you tried?
  
  Try to restart your iPad look - it's a simple solution that sometimes allows to restore the connection to the printer.
  
  Other things to check would be that there has been no recent changes to the wifi password.

• OfficeJet 5744: Instant ink sign broke the printer

  Finally got the time to plug my Officejet 5744.

  Signed for ink Hp moment and now the printer is useless! It will not print anything and it won't copy.

  It prints the test page until I signed up for instant ink and had the default printer to check next to it. Now, nada.

  Is not amused with the lack of support either. No cat and a few useless to call it only tells you to go the web. I already checked that, and it wasn't any help either.

  Fixed! Thank you Christina!

• OfficeJet Pro 8625: Question of installing the printer

  I bought a Officejet Pro 8625. It included an accessory "duplex unit". What I have to install the duplexer (which automatically make double-sided printing) if I want to do double sided prints for certain documents only?

  Hello

  You must install the duplex module because it is part of the paper for the printer path.

  You can enable or disable the use of the printer driver the duplexer by changing the print on the both sides option in the driver.

  Kind regards

  Shlomi

• How can I copy Photos from an Officejet 7500 a card inserted in the printer to the computer?

  I have a HP 7500 a all-in-one Officejet.  I have an SD card with photos on it is inserted into the slot of the printer.  I'm under 64-bit Windows.

  I can only view pictures and print on the printer.  It won't let me transfer photos from the printer to the computer.

  All other HP printers I had always let me use the SD card as a mass storage device and I could transfer files back using file manager in Windows.

  What I am doing wrong?

  Thanks for your help.

  Hello

  Yes, you can do so by mapping the SD card as a network storage device. Please follow the instructions below:

  http://support.HP.com/us-en/document/c00149194

  Kind regards.

• OfficeJet Pro 8500 does not accept the new cartridge

  My OfficeJet Pro 8500 has 910g does not accept the new magenta cartridge. It displays replace following used cartridge in the order of printing continues (translated from Swedish). I've done various resets and now to restore the alos an OOB (out of the box), does not help. My weighs 40g 940XL cartridge so I know what it it not empty. I have read a lot about the problems of cartridge maggenta but found no solution. The printer is fine, but this problem is driving me crazy! I have always recommended HP printers and have owned quite a few over the years,

  No problem, I understand.

  I think that could happen is that the oval pin mechanism comes into contact with food has become defective over time. Its supposed to sink to bottom when feeding is complete (on inserting). Over time as the ink level runs the mechanism will expand gradually until you reach full extension on what an ink level alert is triggered. What might happen in your case, is that the mechanism is not entirely depressing even when the new full provision is inserted. This would explain why to apply the tape inside the oval window on the supply allows the new offer be detected. Unfortunately, the fix for this would be to have the machine. If you think it's something you want to do here is a link where you can check the warranty status of the printer and based on this status, you will be presented with relevant options

  http://h10025.www1.HP.com/ewfrf/wc/weInput?cc=us&DLC=en&docName=c01321436&LC=en&product=4116838

  With regard to the branch point the device directly into the wall socket, sometimes for some questions (usually power up/on) the resolution can be plug directly into the wall in the routing through a power bar or surge protector can induce weak variations of the voltage applied to the unit. However, this should not be a factor in the problem you are experiencing, so there should not be any need for you to change your current configuration.

  More sorry that you are having a problem with ink level detection on your device. Please post back with other questions.

  Best.

• My iPad does not recognize not my Officejet 6500 has, unless I turn the printer off and then on again. Why?

  I recently changed my router from BT to Technicolor gateway provided by Utility warehouse.

  Previously, my iPad easily recognized my HP Officejet 6500 printer has (ethernet) but now this isn't unless I have turn the printer off then on again.

  Of course, it is a pain. How can I solve this problem?

  Thank you very much

  Hello

  It seems that the new router may not support multicast or was not configured correctly.

  Networking Hello Zero Configuration Apple is the method of communication used by any Apple device and relies on IP multicast.

  Some routers does not support multicast or maybe this option is disabled by default.

  I wouyld recommend contacting the Technicolor gateway serice provider and check if the access point supports multicasting, or it may require updated firmware or the specific support configuration.

  Kind regards

  Shlomi

• Officejet 4315 slow printing problems after replacing the print cartridge

  my printer was working fine until I replaced my print cartridges. I replaced the black with color with 22 and 21.

  my test page prints fine and sometimes my impression is very good. but often, my impression is extremely slow. can't understand why it is slow sometimes and other times it is nice. do not have this problem until I replaced my print cartridges.

  I found a post on slow printing and I tried the different steps. don't know what the issue is. Thank you

  Real new ink installed HP?

  You could remove the cartridges, reset the printer and turn on without the cartridges, and then reinstall the cartridges. Eliminate any power surge strips or extensions, plug the unit directly into a wall outlet.

  When you mention slow, how to slow down? How long to print from the computer exactly? How long for a print job initiated from the printer exactly?

• HP LaserJet 200 color M251nw: delete the print job?

  This should be very simple, but my grandma brain can't seem to find where to delete a print job from the printer.  Someone at - it help him?

  HP LaserJet 200 color M251nw with Mac OS X 10.10 Yosemite

  Thank you!

  Cindy S.

  There is nothing like you have had on the inkjet.  LaserJet is very fast that so generally they do not need store work as they are printed as they are sent and receive jobs one at a time and sometimes hold jobs in memory according to the size and the number of jobs received at the same time.  Only way to cancel is to hit labour to cancel it or the 'X' button depending on the model.  Storage of the work is available on some LaserJet of top-level with HDD storage, control and retrievel of jobs, but most of the time with the LaserJet you do not have this option.  Printers large format HP also have the possibility to store jobs (location and nesting), change the print order, etc., but again, what are printers with hard and special drivers built into the software to handle these tasks.

• OfficeJet Pro 8620: Locked out of the printer settings

  Good evening

  I was unable to print wireless so I did a network reset the unit. When I rebooted the machine, I proceeded to return to the network settings in order to capture the wireless information however I received the error "function has been locked by the administrator or the person who set up your printer".

  I'm not sure what is the problem with that I'm the one who created this printer. I assign a password to the machine, and with that, I have no option to enter in order to unlock all the features (there is usually an option under 'Tools'.).

  After some searching through the forums, I printed a wireless test and the results were a single FAILURE for Wireless on.

  Any help/suggestions would be greatly appreciated.

  Kind regards

  Mark

  He had a semi full reset, which once preformed resturned unit to its state of semi reset and allowed me to change the settings I made.

• HP OfficeJet 6500 E709n: Strange characters in the printer on Windows 8.1 preferences page

  When I use the printer from native Windows applications such as Notepad, Paint, and Wordpad etc., strange Chinese characters appear in the printer preferences window and no option selection is visible or available.   -No error message.   -J' I disable the device and re-installed the latest HP driver software.   -L' unit operate normally, except for the problem of page preferably.

  Hi @JSvWyk,

  Am I assume it looks something like this?

  

  You may need to change the language of your operating system. Research I've done, it seems that some languages, such as English (United Kingdom), cause this hiccup. Please check or change your language to English ( States- United).

  To check or change your current settings, go to control panel and select clock, language and region, and then select change regions. On the Format tab, select English (United States). On the location tab you have the United States in the current location of falling down and then select apply.

  Please let me know if I indeed understood the question correctly, and if the problem is now resolved. Thank you.