OfficeJet 4630: 10 windows cannot find my printer wireless

Similar Questions

• OfficeJet 4630: anyone can print reliaby with Officejet 4630 under Windows 10 (64-bit) using wireless?

  I have a couple of PCs.

  Both run Windows 10 (64-bit).

  An upgrade from 8.1 64-bit. The other is Windows 7 ultimate (64 bit).

  I bought Officejet 4630 at the end of September.

  So far I have not been able to print from a reliable PC at all.

  Sometimes maybe a page can be printed, but if I try the next page. The print queue seems to get hung.

  Worse, on a PC (Win7 64-bit upgrade), I can not connect with USB at all.

  Immediately after installing the driver, it fails to "print test page"? What gives?

  (I have not tried the USB connection with other PCs through the situation. He's far away and so connected via radio.)

  Strangely enough, it's the HP printing diagnostic seems to work perfectly. It prints the test page.

  But, after a week of Calvary and see how works the test via the web interface, I now have the feeling that

  HP diagnostics program simply sends a command that causes the printer to print a test page to itself, and not

  through the path of ordinary driver through what print ordinary application data. It can be found.

  Due to the failure of printing with a USB connection, I asked local HP support for replacement t

  hinking that unit was bad.

  However, the replacement arrived today, but the same symptom!

  Agah.

  I'm afraid that HP screwed royally here, but worse yet, it doesn't seem to be aware of the problem in the light of some

  Reviews of so-called unconscious support people!

  If someone has this printer works reliably on windows 10 64 - bit

  Please let us know what you were doing. (although the chance that someone with perfect condition watch Forum HP may be low. You are posting and I read this forum because of problems...)

  -How you installed the driver (from which source)

  -which tweaks you did.

  I tried to install the OJ4630_198 and the driver is updated to Windows.

  Windows Update seems to be a little better, but still stuck print jobs are seen after a few

  tests and unnecessary. (Initially because of this apparent initial success, I thought that the problem was limited

  so a PC, but now I think that both PC evenly suffer failure).

  So far, I tried to change the PORT to a fixed TCP/IP address port (which sometimes seems to be feasible: sometimes not.) I was not able to understand why. Maybe the difference between HP driver or Windows update)

  Sometimes after the Ministry of port, the first printing time works, but the

  next print does not work.  It remains in the queue.

  This has been driving me crazy...

  If person not steps forward with the installation of reliable work (10, 64-bit windows), I think I'm going for it back to HP, although the initial cooling period has expired from a legal point of view, I'll see if I can convince the support contact.

  I bought HP printers only over the years. They lasted well and worked like a charm, and the black ink was really nice.

  After that, I can't printers recomment the HP to my friends more.

  TIA

  [Driver in Deskjet 6980 works for printing with capricious 4630]

  Under improved Windows 10, too!

  I checked it after upgrading my PC under Windows 7 64-bit of Windows 10.

  After a few false starts, however, some programs are missing 'Dropbox' "Norton Internet Security" (?)

  sort: I downloaded the binary Moose and once I let the Installer run again, they picked up the proper

  configuration of the previous installation and started running.

  I needed to tweak 'Register windows' but when I tried to run 'regedit' something 'Extended attributes are '.

  inconsistent"and any program that requires administrative privilege would begin: maybe Dropbox and Norton Internet

  Security has failed because of this issue. Surprisingly, I could fix this by restoring the default Windows theme.

  (In my previous attempt to update, I put it to something Bing, a jazzy theme on the Japanese season, or something.

  Affected and surprising finished showing 'Extended attributes are incompatible' (or you may need to

  reset the sound theme as well. YMMV.) I raised this strange questions after the upgrade just in case

  These problems are related to the Deskjet 6980 under Windows 7 64-bit driver installation before upgrading to Windows 10.

  Somehow, however, the previous installation of the driver instance 4630 seems to have disappeared (maybe I deleted it before

  the upgrade, I don't know.) So I install driver 4630 for * SCANNING * purposes only.

  FAX can wait a while.

  Finally, some working environment for Officejet 4630 with using the Deskjet 6980 driver for printing

  is being created.

  TIA

• Satellite A210-171 cannot find the printer wireless

  I have very recently the satellite A210-171 and I am trying to connect a Lexmark x 4580 wireless printer. I installed the disc from the printer and everything is fine but when I come to print wireless computer can't find the printer.

  I have to do something for the computer other than the installation of the disk of the printer.

  Any help would be good.

  Is your wireless network setup correctly? I mean is your wireless laptop printer and your router configured properly and that you have a connection to the internet router trough wireless?

  Please give a better description that you have, if you have a wireless network with a router etc... and how is your configuration if your network is configured with dynamic IP addresses etc...

  Moreover, a little site here´s how to set up a wireless network:

  http://www.Microsoft.com/athome/moredone/wirelesssetup.mspx

  See you soon

• 8.1 Windows cannot find the printer

  Recently upgraded to windows 7 8.1. Now windows can't even find my Canon pixma mx700 printer. Trying to install printer driver for windows 8 of canon website, but nothing is. Help, please...

  Printer works now. I can't do anything else, he just started to work with compatibility settings.

• MacBook Air cannot find the printer wireless

  My MacBook Air cannot 'see' my wireless printer and will print when connected by USB.  I lived every suggestion troubleshooting support site HP could offer and they sent me here.  I don't think there is a problem with the printer or the network because I can print my husband very well from my phone or MacBook Air.  I can't find the settings on his computer that are different from those settings on mine, and we are both running iOS 10.11.4.  I would like to advice or suggestions.

  Thanks in advance!

  I've lived every troubleshooting suggestion from the HP support site could offer

  And those who have been?

• OfficeJet 4630: Enter password to connect the printer Wireless - out

  I am at my wits end, HOW to enter a password is a combination of capital LETTERS and numbers - the keyboard does not give me the options that have been suggested for me PLEASE HELP - if I do not have the answer within 30 minutes I have to copy and printing urgent documents offline and bring it to the POST OFFICE

  Download you the manual and read it with a blanket as I just told him? Yes, the printer has WPS, simply follow the instructions in the manual (page 82) to see if get you lucky. The blue wireless light flashing means that you are not connected to your SSID, which basically we knew that routers. Follow the manual and try to connect via WPS, if not read all sections on troubleshooting.

• HP Officejet 5740: HP Officejet 5740 printer for laptop connection problem: "cannot find a printer".

  I'm trying to set up my new printer Officejet 5740 and I got to the stage where I need to connect the printer to a laptop computer or mobile device. I went to 123.hp.com and follow-up stages. My printer is correctly connected to the internet, but when I tried to connect it with my laptop via wifi, I got a screen that says "cannot find a printer". Before that, he asked me to put the IP address that appears in the settings of the printer wireless.

  I have a dual band wireless router, and it seems that my printer can connect only to the 2.4 GHz frequency range. My laptop can connect to the scales of 2.4 GHz or 5 GHz. I made sure that the laptop was connected to 2.4 GHz when I did this step. I even Redid the same process on my sister's laptop (she has 10 Windows), but I came across the same problem. In addition, the screen with the error message says what must I make sure that the firewall has not been in the way of the connection. I tried to disable the Windows Firewall, but I still have the same result.

  I am at a loss for what to do here. Any help would be greatly appreciated. I'm positive, I put the correct IP address, and I even tried to use the host name. Also, I know that my laptop and the printer are connected to the same wireless network. Everything I did for this step in the installation process has been with wifi (not ethernet, USB, etc.).

  Good news! I thought about it. I have all my wireless settings to reset to the default factory settings and that fixed the problem. Something about the State of the router must have been extinguished when I put in place the first time. Thank you for helping me!

• I use Windows 7 on a computer to which a printer is connected directly by a USB cable. I am able to print, but cannot find the printer when I run control/devices and printers Control Panel

  I use Windows 7 on a computer to which a printer is connected directly by a USB cable.  I am able to print, but cannot find the printer when I run control/devices and printers Control Panel. In fact, no devices appear at all.

  Can someone help me with this?

  Thank you.

  See http://www.winhelponline.com/blog/fix-devices-and-printers-completely-empty-windows-7/

  If this does not help, there is a very long thread here, which may include other suggestions--> http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/devices-and-printers-dialog-box-empty/353707a4-bcb0-4334-98bc-aab84747fecd?page=1

• printer Brother MFC-J6910DW loaded onto PC Dell 9300, shared on the network, running windows 7 on Toshiba Satellite laptop, it cannot find the printer cannot print. ,

  other home computers can find and print on the Brother MFC-J6910DW, but my Toshiba laptop cannot find or print. How can I fix? Not too much computer.

  Hello

  Thanks for posting your query in the Microsoft community!

  I understand that you can not print on a network share. I will try to help you with this question.

  (1) did you make any changes before the show?
  (2) you receive an error message/code?
  (3) what is a wired or a wireless printer?

  I can't print from my computer over the network. (For Windows®)
  http://welcome.solutions.brother.com/BSC/public/EU/eu_ot/en/FAQ/FAQ/000000/002600/000056/faq002656_003.html?reg=EU&c=eu_ot&lang=en&prod=mfcj6910dw_all&cat=114
   
   
  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.
  We can't wait to hear back on your part.

• "windows cannot find a driver" in the installation package?

  We have a file server and print XP on our network that has a printer Series PCL LaserJet 3330 installed 5th (using the original installation CD and prints from the XP Server). While trying to install the printer on a remote computer, I downloaded the driver package Windows 7 64 bit for the printer on the computer remote and got the error: «Windows cannot find a driver...» "(I don't understand why the pilot was not as it should be in the installation package.) After getting this error - several times, including the re - download the package and re - try - I downloaded the XP Server installation package and I changed the printer driver it as a package to install downloaded for XP. We always get the same error. The installation of the printer worked fine before having to redo our BONES. Anyone know this problem and can help with this?

  This issue is between 64 bit and 32 bit, and there is an easy solution. Once you get back to the way it was before you downloaded the 64-bit package that you go to the machine that you want to load the printer and the printer as a local printer using load say lpt1 port. Auto not detect or print a test page and just finished the installation. Now on the windows 7 computer to join devices and printers and right click on the printer icon and scroll the properties first and left click. Go to the ports, and then add the port and in the box that comes up to put in the name of printserver and the share name of the printer by using the syntax \\printserver\sharename how save and apply and this computer will now be able to print to the printer.

• Windows cannot install your printer driver and / or utility

  I have an Epson SX200 printer all-in-one and I am trying to install the device on a Vista 32 Dell laptop.  I don't have the disk for the printer, so I try to download the drivers for the printer on the epson site.

  I downloaded the drivers scanner and software sucsessfully, trying to download the point of finishing extracing printer driver files, I get an error message saying "Windows cannot install your printer driver and / or public services."

  I tried the support of epson who tried intsalling the pilot from other web sources, bottom of dissabling starting programs, etc.

  I searched the web but cannot find any patches or explanation to the problem...

  Any ideas?

  Hi J Bielawski,

  Thank you for using the Microsoft Windows Vista Forums.

  Method 1:

  Let us try to disable the Antivirus security software and check the number.

  Re-enable the security software after checking the issue.

  You can also try disabling the firewall and check the issue.

  Re-enable the firewall after checking the issue.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Check whether the problem is resolved.

  Method 2:

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot

  Step 2: Enable half the services

  Step 3: Determine whether the problem returns

  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns

  Step 6: Resolve the problem

  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode.

  Uninstall or update the program that is causing the problem.

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Windows cannot find a driver for HP LaserJet 1022 on the network. To locate one manually, click on OK.

  Computer (win xp 32-bit) A located 1020 printer with sharing

  Computer B (win 7 64bits) successful connect through A computer printer share

  Computer C (win 7 64 bit)

  Computer D (win 7 64 bit)

  D C & computer appeared this message: -.

  Windows cannot find a driver for HP LaserJet 1022 on the network. To locate one manually, click on OK.

  When I click OK, I get an error message:

  Required file: INF for HP LaserJet 1022 printer driver
  The file '. INF' (unknown) is needed.
  Type the path where the file is located, and then click OK.

  On the Win 7 computer...

  Devices and printers
  Add a printer
  Add a local printer
  Select create a new port:
  Select Local Port for the port Type:
  Enter the name of the network to the XP computer that is. \\XPcomputername\LJprinterid
  Install the LaserJet 1020 driver when prompted

• Cannot find the printer

  Product) 1 name and number: photosmart Hp 5510, (2) installs operating system: Windows 7 64-bit, (3) error message: cannot find the printer {after you click on the option called NETWORK in the connection Option}.

  Please if I'm quick on the suggestions

• Cannot find the printer on the wireless network

  My new 6500 a 710n-z printer copier copies very well.  Also, it detects the wireless network and is given an address 169.254.182.35.  I have reset the router several times using the WPS button.  But after I installed the software on my netbook ACER Windows XP, the computer cannot find the printer.  I spent three days trying to get the $% # ^ & * to work.  I see in some documents to get a 169.254. IP address, so I'm probably not connected?  But what to do?

  Well Yes, a 169.254 IP address... is auto-assignée when he can't get one from the router.  The WPS button does not reset the router.

  Do this on the printer: Setup > network > Wireless Setup Wizard. Follow the instructions.

• Receive an error message "Windows cannot find"C:\Windows\Program Mozilla Firefox Firefox\firefox.exe"." when launch firefox without the inability to use

  Hello!

  It's happened since I got a virus a months ago who was preventing the computer to start. She came back from the repair shop and it begins again now. But after a few hours of using Firefox, this message pop up at random:
  "Windows cannot find"C:\Windows\Program Mozilla Firefox Firefox\firefox.exe". Make sure you typed the name correctly and then try again. »
  Example: http://www.risingroad.com/foxhound/faq/images/Windows%20cannot%20find%20firefox.jpg

  and Firefox still work after this message appears. I already uninstalled and installed new Firefox completely, and the message still appears upward. What this mean and is it harmful to the computer?

  I'm on Windows 8

  I had the pop up ads sensation can cause the problem and talked about it to the engineer in computer science from my father. It installs Malewarebytes and there was indeed still a maleware by repair men left. The difference was, Chrome to view the full announcement page while Firefox may have in maintaining security to block this kind of page, and the result was the error message. (I didn't know that because it happened to me on my computers to the precedents and even Firefox used to show me the ad then) Thank you for warning me.