OfficeJet 6500: stop Setup

Similar Questions

• HP Officejet 6500 stopped scanning documents. Functions of the printer and copier still work

  HP Officejet 6500 stopped scanning documents. Functions of the printer and copier still work

  If HP is unable to repair it, nobody else can either.  Buy yourself a cheap Canon scanner if they cannot make it work.

• OfficeJet 6500 stopped 709n of print, print e-mail messages but does not print silkscreen.

  I deleted and reinstalled the driver software, I run WIN7, but drive is not compatible. I have reset my wireless connection and all the test gives a good result. When I try printing an element, as a recipe that has a print button, printing is no beep, no impression is given. I have this printer for some time and it was working fine until, mysteriously, it stopped and gave to this problem. Nothing will in the queue, at the same time things went in the queue but never printed. Help, please!

  Hi CaptainSteve,

  I'm sorry to hear that you have problems with your Officejet 6500 E709n.

  I have included a link to the driver Windows 7 given that you indicated that your CD is not the driver for Windows 7. HP has a wizard called printer install wizard for Windows 7 and Windows 8.  It will search for the best driver for your printer and your computer, and you went through to install the appropriate driver.

  I have also included a document on what measures to take when print jobs are stuck in the queue in case of problems. HP also has a utility shooting known as the printing and scanning doctor.  It is a diagnostic tool and solves many problems of printing, scanning and connectivity.

  Driver and HP Officejet Full Feature software

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-77752-2&CC=US&DLC=en&LC=en&os=4063&Product=3795406&sw_lang=

  You have problems to find your Windows 7 or Windows 8 print driver? Try the HP printer installation wizard

  http://support.HP.com/us-en/document/c02691615

  Unable to print? Print jobs are stuck in the print queue

  http://support.HP.com/us-en/document/c02205477

  Try printing HP and Scan Doctor for Windows

  http://support.HP.com/us-en/document/c03275041

• HP Officejet 6500 stopped A910 scans e-mail sending

  I saw similar posts to this one, but none with the same conditions.

  I used to be able to scan to e-mail without problems; in fact, I did it hundreds of times.  A few days ago it stopped working.  Now, whenever I try to scan to email I get an error that says: "network connection error. Check the network and try again.  However, the printer is actually on the network; I can even go to the web server built into the printer in my office on the network.

  The printer is configured for a wireless connection via a protected by WPA wireless network.  This configuration has not changed in months.

  A curious thing is that when I try to troubleshoot using the web interface, when I try to test the configuration of the e-mail for example, I get the "Network connection error" message on THE WEB PAGE.  In other words, the printer tells me on the network that there was a network connection error, which is weird when you think about it.

  I really depend on this feature, so I hope that someone who has experienced it before can help me.

  Some clarification: the outgoing smtp server is gmail.  No, I have not recently changed the password to my gmail account.  Not that it matters, my client computers are all Macs.  Yes, my wireless works fine in all other respects.

  Hello

  Try unplugging your router for 30 seconds, plug it back and turn the printer off and then on again.

  Now try scanning to e-mail and check for the difference.

  If the same error persists, try to assign a DNS address manually as follows:

  1. Open the built-in web server, and then click the network tab.
  2. Under the active connection type section, click IPv4 (wired / wireless).
  3. Keep the IP address Configuration because there is, under the address Configuration DNS check the box next to manual DNS server.
  4. Define DNS preferred as 8.8.8.8
  5. Set the auxiliary DNS as 8.8.4.4
  6. Save the changes and try to scan the image to send.

  If there is still no difference ensure your printer firmware is up-to-date:

  http://support.HP.com/us-en/document/c02830943

  If none of the steps does not remember to specify what email provider that you use.

  Shlomi

• My Officejet 6500 more suddenly stopped printing wirelessly from my iPad 2

  After working perfectly for several months, my 6500Plus HP E710n Officejet-z does not print wireless from my iPad2 or my iPhone 4 s. I use version 5.0.1 on these devices and had used this version before that the printing problem. I get the following message: "Officejet 6500 E710n-z [11E2A9] the printer is no longer available." The printer works fine (without thread) of my MacBook Pro in OS X 10.6.8 version. I "think" that there was an update from HP before it started, but I'm not sure of the timing. Any ideas on how I can get these mobile devices wireless print again?

  What router?  Reboot the router by pulling its plug momentarily.

  If this does not work, we will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• HP Officejet 6500 has stopped printing, paper white just came out.

  My Officejet 6500 has just stopped printing.  I use a USB connection and my operating system is Windows XP Home Edition.  At first, it was just the text that Wouln't print but the colors would come by, even on test prints.  On a print document the little box comes up showing the data transferred to printer, printer starts but doesn't work with a blank page.  I have uninstalled/reinstalled program, has gone through the full program of the HP Solutions guided, checked all connections, installed the new driver, and yet do not print anything.  Have never had any previous problems since I bought.  I have not recently installed new programs.  Would appreciate any other suggestions.

  After everything I lived, I finally solved the problem.  Although the ink levels showed ink cartridges, I put a new black in one and it works!

• My HP Officejet 6500 all-in-one wireless suddenly stopped to print black, even if I have a lot I have

  My HP Officejet 6500 all-in-in-one wireless suddenly stopped printing black, even if I have a lot of ink. It prints all other colors. When I try to check the ink levels it tells me that this printer is not available, try again later. I have a lot of ink. Have restarted printer and Mac Book Pro. Driver is up-to-date. Any thoughts?

  Reset the printer.  Turn the power off and then hold the # and 6 keys during and shortly after turning it on.

• OfficeJet 6500: It stop making copies

  Was very good copies and then all of a sudden resignation work.  The original is scanned and copied to the status bar, but the page is empty.  I have tried both a copy of sweep and placing it on the glass.

  Hello MDKAggie79,

  Welcome to the HP Forums.

  I see that you have a problem with the printer print a blank page.

  I have some suggestions that in order to solve this problem, we can try.

  First of all, please make sure that you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  I have also found a document on the printer prints blank Page or does not print black or color ink for the HP Officejet 6500 is e-all-in-One Printer Series.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  If you have any other question or concern for me, please do not hesitate to write again at any time.

  See you soon,.

• OfficeJet 6500 setup

  I'm trying to set up my printer officejet 6500 E709a as a network printer. The printer is connected to my windows 7 a desktop works well.

  I can't get my installation of XP laptop to print to the same printer.

  Hi jerwhitt,

  Looks like you have the printer connected to your desktop computer using an Ethernet cable. What you need to do, that is it connected to a router. The printer hardware and the computers to the router in this way, you can use the printer with several systems. Follow the steps in the link below for installation of network infrastructure.

  http://support.HP.com/us-en/document/c02271484

• HP Officejet 6500 has stopped printing

  For some reason, my HP Officejet 6500 has everything in a printer does not print any more. The document moves through the printer and comes out blank. It does not print anything to a file on the computer, including something as simple as a letter. It won't photocopy. It will only accept faxes. The paper just moves from the status bar if the machine and get out again, blank. When I tell it to do a test print - it will print the boxes and lines and color, but does not print anything else.

  About a week ago I had trouble with my air conditioner, and he got up to 90 degrees F in the House. The printer worked fine before, now it doesn't. The fire to something the printer?

  For some reason, my HP Officejet 6500 has everything in a printer does not print any more. The document moves through the printer and comes out blank. It does not print anything to a file on the computer, including something as simple as a letter. It won't photocopy. It will only accept faxes. The paper just moves from the status bar if the machine and get out again, blank. When I tell it to do a test print - it will print the boxes and lines and color, but does not print anything else.

  About a week ago I had trouble with my air conditioner, and he got up to 90 degrees F in the House. The printer worked fine before, now it doesn't. The fire to something the printer?

  I don't know how all this relates to MS Windows, but maybe you could try HP support regarding problems with your printer, for example.

  http://h30434.www3.HP.com/T5/Web-printing-software/OfficeJet-6500-won-t-print-black/TD-p/462153 the heat in the House can have dried ink cartridges.

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/printer-HP-OfficeJet-6500-E709n-series-doesn-t-print/TD-p/1897459

• IPhone 4 and Iphone 4s, not being not able to pick up officejet 6500 a - 710 to a printer while

  IPhone 4 and Iphone 4s, not being not able to pick up officejet 6500 a - 710 to a printer while

  my mother bought two, one for him and for me, I set his first, then returned to do mine.

  I managed to print ONCE! His works very well.

  I created his exactly the way I created his own. The other difference is our routers.

  I have not hers, not mine wired to the computer.

  I have reset the router, phone, computer, internet, printer box! its on the same WiFi as the computer and phones.

  the software is updated on the phones and the printer.

  I have a linksys router rangeplus wireless model # WRT110<>

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Yours is 192.168.1.100 a.149.  We will use 192.168.1.200 for your printer.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway

  -Enter for the first DNS 8.8.8.8.  Enter to the second DNS 8.8.4.4.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Install HP Officejet 6500 E709n failure - can't see the printer on the network

  My HP Officejet 6500 E709n refuses to acknowledge that he is already on the network a specific IP address and used by other computers in my house. How can I get this software install to work?  I have to let Windows 7 install its own version, which worked (sort of).  I prefer having the center of solutions for scanning, but the HP install software (full version), in contrast to the MS Windows 7 software, can't find the printer on the network, even when I give the software the exact IP address.

  (Yes, I uninstalled all the pieces I had to uninstall in Control Panel by the NSB instructions re-re-re-install software page.)

  Hi rchimes,

  Thank you for the update. If you are unable to get the problem solved after using the doctor print and Scan follow the steps to scrub the software on the computer and then reinstall it.

  First step: clear temp directory

  1. tap folder in the race or search programs and files of field

  2 Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).

  3. proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-77752-2&CC=US&DLC=en&LC=en&os=4063&Product=3795406&sw_lang=

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know what you find?

• Status.msi error with installation of the hp officejet 6500 E709n wireless

  It's frustrating.

  "I tried to install a full print driver software for my portable printer wireless hp officejet 6500 E709n and even if I can complete the process, I get this error message: the component you are trying to use is on a network unavailable resource.

  When I click 'OK', I get a "status: the path..." OK6500vE709_Full_14\setup\status\status.msi could not be found. »

  I then get a third message that appears each time you start to the top of my computer hp laptop dv6871us: "Please wait while Windows configures the status.  And... It's constantly repeated ad nauseam.

  How can I find the status.msi file and stop this endless loop of error messages?

  TX

  Yes, it's very good information.  Thank you to be thorough to me.  I actually had this happen to me personally on my Windows XP and printer Photosmart older (different error message but even constant pop up).  I could easily (but a lot of time, I might add) fix my problem of:

  1. uninstall the printer from Add/Remove programs.

  2. run cleaning disc of all programs > Accessories > system tools > disk cleanup.

  3 restart the PC.

  4 selection of a backup in CCleaner system option and then cleaning the registry using this tool. Click here and carefully read the reviews in CNET and opt to download the tool to see what I mean.

  5. restart the PC again.

  6. can download and install my printer on the site, but in your case, here are the drivers and the software feature full Officejet 6500 Wireless (the link is for the version of Windows 7 32-bit PC U.S.).

  This can become very difficult at times, so I want to provide this very comprehensive document from HP which covers your exact error message and their favorite not to try.  Mine are a little easier but a 'tad - little' more risky because I provided a link to a specific 3rd registry part cleaner that you use at your discretion (there are others out there).  I like it because I can back up my system first in the case where that something else has been removed should not have been.  I don't have that happen, fortunately.  Please read this document as well just to be on the safe side.  I'm here to help (do not do worse) so let me know if I need to explain something better, but I think that you have everything you need here to start.

  -Theresolution of the MSI boot errors-

  Let me know how it goes!

• HP Officejet 6500 a more impossible to connect to the server

  My HP Officejet 6500 a more printer was connected to my wireless network and was attached to the ePrint service; and I had an email address to send prints to my printer. But today, when I go to the ePrint, it shows that my printer is NOT connected to the SERVER!

  He invites me to go to the Setup menu option / Services Web Setup / email address Panel on the printer display. And, when I do that, it shows me: "you can connect the printer to the itenrnet through a proxy server and touch the ENTER PROXY button! I do not know what Proxy Server, he is asked? And when I get soemthing, it then asks a PORT number! Still, I don't know what is the Port! My printer is still connected to my home wireless network.

  Then I went back to HP ePrintCenter page and REMOVED my printer and then tried to ADD a printer, but, now, he asks me to "enter the printing Code.

  When I tried to enter the print code I had on the file, it says that the code was not valid; the codes are ONLY good for 24 hours, and I have to get a new printing code to return to the configuration of the printer menu steps described above!

  Looks like I'm stuck in a vicious circle.

  I would appreciate your help. Thank you.

  To correct the unable to connect to a web server error. I'd start by power cycling the router and the printer. If still we get the error that I will then try to put a static DNS server built-in web printer (EWS).

  To power cycle the router:

  1. unplug the router (most do not have a power button) and then put
  the printer off using the power button
  2. wait 30 seconds
  3 plug in the router, wait until it is completely upward and the operation.
  4 turn on printer
  5. after the printer is completely top and operational reattempt to connect to web services

  If after that, you still get the error message, I had put the static DNS. To do this:
  1 get the IP address of the printer, and then make a browser (IE, Chrome, any browser you want) and enter
  IP address of the printer in the address bar. This will bring up the SEWS
  2. search for the network titled tab and click on it
  3. then click on IPv4 in the left column, wired / wireless depend on the connection, if connected by Ethernet
  Choose wired, wireless select wireless
  4. when loading this page watch the second part entitled 'Configuration of the DNS addresses' change this radio
  Manual button and change the DNS preferred manual to 8.8.8.8 and manual to auxiliary DNS
  8.8.4.4 and then click on apply.
  5. pay particular attention the following screen which appears this message usually is a way to undo changes only
  made by clicking on the OK"" button. Avoid this by clicking another tab
  or just leave it until you close it.
  6 turn the printer of the cycle and then turn it back on
  7. once the printer is back on and retry operation, activate web
  services and reprint information page so that you can get a new code and add your printer back to ePrint Center. You will need to create a new e-mail address for the printer.

• How to connect to the HP Officejet 6500 wireless printer

  I recently bought the printer portable officejet 6500 from costco. Initially, I have it connected via a USB port on my laptop and follow the instructions in the CD. I also activated the wireless to the printer. Now, I'm trying to connect to the printer from my office laptop. I have not installed anything on my office laptop. I went into Control Panel, printers and tried to add this printer. I'm assuming that, given that the printer is already selected for the wireless, I thought that I'll be able to see that when I add a printer. When I tried to add the printer its asking me a URL. I tried to get the printer Network Setup page portable officejet 6500, but the URL does not work. I need to install the CD that came with the printer portable officejet 6500 on my offcelaptop to make it work? Any help would be appreciated.

  Thank you

  @hanleyn, I'd be happy to help you with this problem.

  You will need to go to your settings of the printer.

  1. Select network settings.

  2. Select the wireless configuration wizard

  After perform you these steps, you need to get on the computer and to update the IP address. (It would occur on the printer on the Network Configuration Page).

  Then go to the computer.

  1. click on Start Menu

  2. Select all programs

  3 select the HP folder

  4. Select the name of the computer

  5. click on the IP ADDRESS UPDATE or wireless configuration.

  6. put the new ip address in the place.