OfficeJet j5780

Similar Questions

• All-in-one OfficeJet J5780 printer does not print manual duplex

  Hi all

  first of all, sorry for my bad English; I'm Italian and the Italian Forum, I can't find anything that can help with my problem.

  I use my old (and wise... ;-)) OfficeJet J5780 on my laptop with MS Windows 7 SP1 64 bit for years without any problem. In particular, I use the option to manually print on both sides; This means that, once selected this option, the printer automatically prints odd pages in reverse order, and then a pop up tell me to take the papers printed, rotate and load them again; then I click OK and print even pages in the right orders.

  Suddenly after any event special, for a few months, or even I select this option, the printer prints the odd pages and then nothing happens on my pc, no pop-up window appears, the printing process remains in the coil and I can not the printer to print even pages too. The only way is to remove the process, clean the spooler and restart it.

  I also installed the latest version of the drivers and all of the full package of the HP software, but the problem is still there.

  As a solution, I apply manually print the odd pages in reverse order first, then same pages, but it's really a mess...

  Could someone help me?

  Thank you very much.

  Hi Phoenix69,

  If this is the case then itreally could be drivers.

  You can follow this link to completely uninstall the old software and then use this tool to automatically install the correct software for your computer.

  Thank you!
  IdleHands

  Although I am an employee of HP, I speak for myself and not for HP.

  * Say thank you by clicking on the "Bravo!" Star"located on the left *.
  Make it easier for others to find solutions, marking my answer to "Accept as Solution" if it solves your problem.

• I can scan is no longer for officejet j5780

  Is no longer, I can scan for officejet j5780 after installation Lion Mac software despite 'built in drivers' update is there any help or should I throw the machine?

  Sorry not good on tech stuff: I have just (used) to go to the HP icon on the desktop and select «scan to...» "it's a 3-in-1, but now it says Scanner could not be found or similar. Thank you

• Officejet J5780: Erasing memory Officejet

  My Officejet J5780 is end of life, and I want to recycle. But I fear that his memory may keep some personal information. The model memory specs are: 8 MB ROM, 32 MB of DDR memory. What is the best way to make sure that the memory is erased completely clean? Y at - it an internal hard drive or memory card that must be eliminated physically?

  Hey @Bosco24,

  Welcome to the Forums of HP Support!

  I understand that you're looking to erase the memory of the printer Officejet J5780 all-in-one. This model, like most printers, is unable to store personal information.

  Please let me know if that answers your questions or solve your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• The computers on the LAN cannot print on old HP Officejet j5780 printer.

  HP Pavilion hpe h8 - 1360t 64 - bit, OS Windows 7 Home Premium. Old LAN had computer of Windows Vista 32 - bit OS and computer from Windows Vista 32 - bit OS with the USB printer connected to it. I was able to print on both computers. I bought the computer HP has declared earlier and installed in place of the original. The drivers for the USB Officejet j5780 printer have been updated to 64-bit and works very well with the new computer. The old 32-bit computer connected to the LAN does not print. Both computers recognize the LAN and connected devices. When printing is attempted on the old computer, the print job is sent without error, but does not appear on the computer, this printer is connected to. I created the LAN with Windows network and sharing.

  Thanks for the reply. I discovered in a document of Windoows is you have this problem with computers with different operating systems on the same LAN-in my case vista and windows 7 - change users under the same name on all computers. I did it and my two computers can share files and folders and print.

• two black lines on HP Officejet J5780 all-in-one

  When you print from the ADF of my officejet J5780, two parallel straight lines appear on the right side of the top of the page toward the bottom of the page.  Anyone know of a solution? My research, such as it was, came the voids.

  Since you get only that when you use the ADF and not when using the scanner glass, it tells me it is specific to the region I was explaining.  Please take a closer look, it is possible that something is under glass in this small strip.  Even a small speck of dust, in the analysis of this region will create an output of a line to the bottom of the full page.  If you hold the printed page with the line where the ADF would feed through the scanner glass, you should see where is the problem area.

  Thank you

• Unable to print - Officejet J5780 all-in-One, connected to the laptop USB

  I bought a HP all-in-one Officejet J5780 in 2008 and all this year I started having problems printing. I am a student online so I need to print assignment or documents related to the class of my laptop, or make other personal business which involves an impression. I connect the printer to my laptop with a USB port. I have Windows 7 Edition home premium on my laptop. When I bought the printer, I used it with another laptop with Vista. Last year, I bought a laptop.

  I'm going to open a document, click on print, a box will appear as if sending information to the printer, and then nothing happens. The file is located in the print queue whose status is empty. Sometimes stop the printer and re - start, it would start printing once reconnected. But no more. Sometimes if I start my printer first, let it sit, start my laptop, let it sit a bit, connect the USB cable, let them rest a bit, then try to print it will work. But it is rare now. Sometimes if I am performing a repair online it suddenly started working. But it becomes harder and harder.

  I guess I need to new drivers or something, but I don't know which ones to download from HP. This new laptop does not recognize the printer software disk came with.

  I try to start printing HP and doctor Scan and it detects my printer at the start, but at the next step, it does not, said that it can not be connected. I can print an alignment page or test page.

  Or is it time for a new printer?

  I know that is not the USB port on the laptop, because I used the plug with other types of USB cables and everything works. I was wondering if the printer USB cable is bad or corroded the output on the printer itself. I bought a new USB cable and tried. The printer has been detected, updated drivers, and until now it works fine.

• HP Officejet J5780 all-in-one will print test and diagnostics pages but nothing else

  I tried to install my Officejet J5780 on a Windows 7 machine and install CD does not work for Windows 7.  Downloaded the software and drivers from the HP site and since then the printer prints a test page or a page of diagnosis etc but nothing of MS Office or Notepad.

  Any ideas?

  Hello

  I see that you have a problem with the printer. I would say that runs the print and scan the doctor.

• HP Officejet J5780 all-in-One printing backwards!

  Hello!

  I have a HP Officejet J5780 all-in-one and had no problems at all since I bought it 15 or 16 months ago.

  However, a strange thing is happening out of the blue - today, everything that I try to print print back - very odd!

  Clues as to what this may be? Maybe a virus?

  I checked all the print settings and they are as they are normally.

  Any help you can lend is appreciated, I should use the printer this weekend!

  Thank you!

  woo2u2

  This problem may occur if you installed Windows XP SP3 recently. If you go to one of the tabs under printing options, you will have an option named "Mirror Printing" or "Mirror Image". try turning it off. I think it's under the "Advanced" tab

• All-in-one printer, HP Officejet J5780 problem

  Printer all-in-one HP Officejet J5780 quit recognizing the color cartridge.  It prints only something black.  It is connected to a computer laptop w / Windows 7/64 bit. I downloaded the latest driver on the HP site.  We also made the cleaning process.  The cartridge ink level shows a lot of ink.  Any suggestions to fix this?

  You may have a faulty cartridge.  Since you have manually wiped the contacts of the machine and the printer, the next step would be to try a new cartridge. I understand however do not want to try this immediately. A way to try to clear the error message and restores the printer to a well-known condition, if possible of the to do.

  Here are the directions for a hard reset.

  1. with the printer plugged directly into a wall outlet and turned on, unplug the power cord from the back of the printer.
  2 then unplug the power cord from the wall outlet.
  3. wait at least 30-60 seconds
  4. plug the power cord into the wall outlet first. If a module with the power cord, make sure that the light of the module and then reconnect power cord on the back of the printer
  5. the printer should power back on by itself, but if not use the power button on front panel to turn on machine.

• HP Officejet J5780 All in one will not scan

  My HP Officejet 5780 all-in can't scan it copy, fax, print, but has an error on scanning then someone please help me.

  Hello

  1. What is the accurate and complete error message you get?
  2. do you and changes to the computer before the show?

  If you are using HP software to scan, I suggest you try the steps from the following link:

  I can't scan in Windows using the HP software
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02661093&LC=en&DLC=en&cc=us&product=3301296#n56

• OfficeJet J5780 'ghost' & paper jams printing.

  My J5780 is probably 2 years or older, always worked very well in all aspects.  Today, he has done several print jobs, from one to three pages, as usual.  After the last (single page printing) print job completed successfully, the printer started out of the blue, a page of paper feed, then fed a second page, (both without printing), and then to half way to the two - third through feeding white page 3, he recorded a paper jam.  There is no paper jam; the before food, rear Wireless, scanning area, high flow access, double all the areas checked with a micro-lumiere.  No scraps, corners, Chad, dust etc.  Printer turned off during 10-20 seconds, to bike, same;  Turn off the printer for 3 minutes, even.  Power dropped once or twice for 1 to 5 minutes, without change.  No pending or in process printing, last print job was successful and completed satisfactory.  None of these events seemed to have any printing tried strictly paper RSS, from 1 to 3 sheets, variably interference on the first, second, or third leaves, up to now. Sometimes with feed several sheets of two to six leaves.

  Message "paper jam: clear jam and press OK." continues.

  Occurrences of holding torque after an action of 'Cancel' when the printer appears to be printed, (no power supply of paper), then Jam review occurs again.

  Been to paper/paper jam feed problems, etc. in several different forums, FAQ, etc.  Solutions?

  Thank you!

  Thank you, Rainbowlady23.  I have clean the rolls early in the process.  So.  Went through your hard reset suggested and as soon as voltage, he started the food cycle like the previous, however, he seemed to be a little bit slower, so I thought I could get through the menu of the printer to default settings selection.  Did it, and the cycle food order.  Tried to do a self test report, but he hung up obviously try to generate the report.  I canceled, did a hard reset of the second, has a different selection of menu/factory by default - and Bingo, it is fixed.

  Really appreciate your comments for me - take care and have a great week.

• RE: Software Center of Solution of my printer to an HP Officejet J5780 All in One

  I can't find the Software Solution Center of my printer on my computer. I was rentalling I tried the software using the CD, but it didn't work. Can you please help me. My OS is Windows Vista Home Premium Service Pack 2.

  Hello

  Please use the link below to download the full featured software for your printer.

  Printing software

  Kind regards
  Jabzi
  
  Help the community by marking this post.
  Your question has been answered? Mark it as accepted Solution !
  See a great post? Give a Kudos!
  I work for HP

• printing in black and white only on the all-in-one HP Officejet J5780

  I am trying to print page 2 of an article of web in plain black and white.  However, the upper part of the page is red on the web, the main part is black and white only.  No matter how clearly, I insist that I want simple black and white, what I get is the page, printed in red.    The printer does not do what I ask.  How can I fix this?

  Hi daniel199,

  You get the same problem when you try to print from another internet browser?

• HP Officejet J5780 all-in-One that wont print more.

  The problem is that it does not recognize when the paper is available; It is said we no paper in it even if there is a large stack of paper there.  What can I do to make it work again?

  Hello

  1 have had any changes made on the computer before the show?

  2 Windows operating system you are using?

  3. What is the full and exact error message?

  See the article and check if that helps:

  "Out of paper" Error Message is displayed and the product does not look upward or feeding the paper

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&DLC=en&docName=c00786157&LC=en&product=3301296

  Let us know if it helps.