OfficeJet Pro 8500 a909: scanning will stop in the middle of a scan

Similar Questions

• HP OfficeJet Pro 8500 A909: Hp Solution Center does not work for Windows 10 installed

  Since windows 10 my HP OfficeJet Pro 8500 A909 will not scan unless I run through the diagnostic tool and then do a test of loading scan. I used to do that through the HP Solution Center, but this doesn't seem to work. His charges and must charge bar but just Flash when you click it. I ran all online and diagnostics Windows, uninstalled and reinstalled on HP website and downloaded new drivers. It still does not work. Windows tells me that all drivers are up-to-date. Out of options.

  Hello

  Could be updated Windows 10 recently. Please check your history of updates of Windows 10 and remove/uninstall kb3132372

  Note: Microsoft is working with Adobe now:

  https://support.Microsoft.com/en-us/KB/3132372
     
  To uninstall this update, click Control Panel, click System and security, click on view installed updates in Windows Update, then select in the list of updates.

  Kind regards.

• HP Solution Center is no longer installed for OfficeJet Pro 8500 A909

  Hi all

  I have a HP OfficeJet Pro 8500 A909 running on a PC with Windows 7 Home Premium (64-bit).

  I can't pinpont when the problem started, but I think it's after a Windows Update.

  For some reason any printer stopped working all together. I downloaded the drivers for the device (OJP8500vA909_Basic_14) and installed them. The printer works now, but the HP Solution Center is no longer on my computer.

  The installation disc for the printer will not work. He said that "the operating system on this computer is not supported. The installation cannot continue until this is resolved. "I guess it's because the computer is much newer than the printer, but I'm not sure.

  Can someone help me install the HP solution on my computer center?

  Thank you!

  Hello!

  You can download the software from our Web site. The software that contains the center of solution would be the full feature software and driver.

  Uninstall the base driver that you have installed and install the drivers you want to download.

  Thank you.

• HP Officejet Pro 8500 a Premium: HP Officejet Pro 8500 a Premium does not print the docs of the computer, but will display a test page.

  HP Officejet Pro 8500 a Premium does not print the docs of the computer, but will display a test page.  I constantly get a message that the computer cannot communicate with the printer.   Not only it will be not be printed docs, it will not print web pages using 11 IE or Google Chrome.

  I used print and Scan of doctor, he always reports there are no questions and print page one same test so I can not print anything else.

  Whenever I want to print, I have to restart the computer.  After the reboot, I have a chance to print.   This problem started on February 15, 2015.

  My operating system is Windows 8.1.   I have unintalled HP, rebooted, and then reinstalled the software software:

  OJ8500_A910_1315 - 1.exe

  HP Print and Scan - HPPSdr.exe doctor

  HPSupportSolutionsFramework - 11.51.0049.msi

  All versions were last uploaded on 4 April 2015.

  I have a home wireless network (router Ubee DDW366).  All other devices in the House will be printed on the printer of 8500 has no problems: 2 Toshiba laptops, 2 Android phones and 1FireHD.

  The desk top is installed with a network card Netgear, I don't know the model, but I had it tested by a PC technology to verify that the card works.   The card and 8.1 of Windows have been installed on January 3, 2015.

  I have run virus scans and analyzes malware.  Whenever they show that there are no problems with my desktop computer.  What kind of desktop? Specially designed for my listing of... without brand computer parts store.  ASUS motherboard P6X580 Premium.  Now I will probably get hacked!

  I'm at my wits end.  And it's frustrating when I need to print something and the system hangs.  I often use screen printing to a word document to save in order to restart... but then I lose all sorts of features when I pick up what I needed.  It is also a time consuming.

  This printer we served well for two years and I have expensive cartridges pending; another two cycles of recharge.

  Help?

  Addendum: can I scan with the HP printer help.  I open the HP printer assistant, he "gets" the printer information, then I select "scan a document or photo" and the printer answers.   I have no problem with the sweep.

  It has been awhile, but I played on something you wrote.  "There could be a software conflict with the HP software" everything worked very well... impression was shifted at best; just didn't know if it would work.  So I would eliminate a program, reboot clean, try to print, and then reinstall the software.  I finally found the culprit.  I had a program running in the background, occasionally.  When it ran, HP does not print.  Stop the program and I was able to print... Do not have a problem since I found it... I do not say that it was a software to share files... so I replaced since this program with something else that doesn't cause problems...  It took a long time and I couldn't work the question every day.... but I can say that I have problems printing for the past 5 days!  I can print with confidence.

• OfficeJet Pro 8500 909 a will not be re - install Mac 10.7.5

  I am very frustrated with this issue, I'll have. Here are the bullets:

  • Running Mac 10.7.5 (Lion).  Printer is connected to this computer through the USB port.
  • Has started to receive messages on my all-in-one HP OfficeJet Pro 8500 909 a scanning would work not and check the documentation for the aid.
  • While looking online and through some troubleshooting, I deleted my print printer to attempt to reinstall fees.

  The main problem I encounter is that I can't seem to re - install this printer no matter what I try.  Here's what I tried...

  • Tried to launch the HP (ver 2.3.15) CONFIGURATION UTILITY and DEVICE MANAGER HP (1.5.8) that was installed on this machine for the printer.  When going through the Setup utility, my device is not seen, so it is considered for a screen and then I invited me with a message that says that my device is not supported by the installer and I had to go to hp.com/support for more help.
  • When I go through SYS PREF > PRINT & FAX and try to click on the '+' to add a PRINTER, the printer never shows in the choice of 'default' as being same / connected.
  • When I go to find help on the support site, the indications only can I find tell me I should use for the Lion, update the Apple software to download the latest update (which I'm sure has already downloaded on this machine in the past).  Tried to restart my Mac, reboot and disconnect all the wires between the printer and Mac, to see if it would work the update of software this printer is connected.
  • I scoured the HP website to try to find the "utility installation hp for lion" install file, but it doesn't seem to be available as a manual download - each direction pointing right back on software updater.

  It is where I am at-I feel like I'm stuck in this small black hole where I can't use the HP Installer on this machine b/c it is too old and I can't download something 'new' of Apple Software Updater.  I did go to the Apple website and download the drivers for Mac OS x Mountain Lion & Lion. I have installed for this machine, restart and still nothing that shows this as a connected USB printer.

  Help, please.

  Chad

  Hi chadkafka,

  Follow the steps below

  1. check that your USB cable is good using a new

  2 open the system preferences and then right-click in the white area open. Select the Reset printing system

  Note: If you have installed other printers this will remove all printers in the print queue.

  3. open utility disk, then on your hard drive. Click on repair disk permissions

  4. connect the USB cable to a Mac and then select now, when it asks you to install the printer

  5. click on the apple icon Mac in the upper left corner and then run software update to reinstall the printer using the ASU.

  Let me know if you get the printer installed successfully?

• HP Officejet Pro 8500 A910 Premium will not send fax from computer with Windows 8

  My printer was working fine on Win XP and I could fax directly from the printer or the computer.  I installed 8 32-bit Windows (I am under an older system that works very well for everything that I use it for - thank you very much) and downloaded the latest driver for HP large & software for Win 8 32-bit.  Everything works perfectly, except for the computer fax.

  If I run the test of the printer fax, the fax test PASSES.  If I run the test fax from the computer, the fax test PASSES.

  If I put documents into the feeder of the printer and use the features of fax printer, it Fax beautifully.

  It's only when I fax from the computer, the screen appears with the status of the queue, then state turns to cancelled each time.

  He has always worked on Win XP.

  The FAX and FAX printer driver for the printer-FAX appeared in Control Panel automatically when I installed the HP drivers/software update.  All the properties of the FAX printer seem good.

  I tried a usb connection and a connection of network ethernet, with the same results.

  Printing and scanning all work fine.  I really like this printer and I love it even more if I could figure out how to get by fax a document from the computer.

  When I say fax from the computer, I mean opening a document saying print, select Fax - HP Officejet Pro 8500 A910, filling the page of information by fax, selecting my cover page options and press send fax.  Everything like I used to do it before I upgraded to Win 8.  When I hit send fax, it is when I get the popup that fax is in queue, then it goes to cancelled.  No error codes are displayed, no clue as to why, no nothing.  If I print the document and put it in the printer tray I can using display printer fax without problem.

  Very weird.

  Well, I spoke with some of the engineers, and they suggested next steps. First of all, here's a thread on a forum of MS on the removal of an alternate driver.

  http://TechNet.Microsoft.com/en-us/library/cc730875.aspx

  Another thing to note is that in Win8, you can easily access the command prompt by pressing the windows key and typing "command prompt".

  In addition, I will PM you walk a few others on the removal of the remains of the software from the back-end of your PC. To be sure, you will need TO follow these instructions to the letter.

  Do these two things and let me know what happens after the installation of the printer again since the direct download link I already provided above.

  Let me know and have a great day!

• HP Officejet Pro 8500 A909a_ Scan with HP Solution Center does not work

  Hallo.

  My name is Michele.

  I can't use the solution Center HP to scan with my HP Officejet Pro 8500 A909a (I have windows 7 O.S.) because when I click on "Scan document", a white error window appears and says "necessary component is unfounded or not properly installed.". Install new software HP Photosmart". I uninstalled and again installed the software, but it does not work. Previously, he worked with XP. Recently, I updated XP with Windows 7 and I found the solution Center HP does not work. Maybe, it does not match with Win 7?

  Thank you to everyone who wants to help me

  Hi people,

  I appreciate the time you took to try to solve this problem. I was able to do more research and found a useful solution, please click on the link below to get started:

  The HP imaging device is not found... - popup error

  Please try the recommendation and let me know the results.

  Thank you

• HP Officejet Pro 8500 A909a scanning install computer

  I have a HP officejet pro 8500. It is installed, and I can easily print to it from my laptop. The scanner works I can scan to a USB device and then manually the port to my computer to download on the internet. However, it the device does not have a target to scan computer.

  (1) the printer is connected via an ethernet cable.

  (2) the printer and my computer are connected for printing, but does not scan.

  (3) I tried to reinstall the drivers for the device (found here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=3752... but it has not solved the problem.)

  I'm looking to bind the scannerwith my computer. I don't know how to do this. I know that it is not currently bound.

  In addition the product user guide (found here: http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lc=en&os=4062&product=3752456&sw_lang... was not helpful for that matter.)

  Help!

  thenextbesthang

  This article can help get back you on track. Give the steps a shot and let me know the results:
  http://goo.GL/FZ5RF

  Good luck!

• HP Officejet Pro 8500 A909n: HP Officejet Pro 8500 A909n - heads will not snap.

  HP Officejet Pro 8500 A909n - heads don't align.

  -replace the heads-get green light in the HP utility on both

  -replace the ink

  -reset printer.

  He's still not the alignment - mires look OK (2 and 3) with the exception of the verticle (focal 1) lines

  second line 3 game are a little out of the middle (vertical)

  Anything else I can try?

  Hey @bgflyer,

  Welcome to the Forums of HP Support!

  I see that you have some problems with the alignment of your Officejet 8500 first all-in-One printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed, this document describes How to solve problems of alignment with your printer.

  If after the above, that you can't always line up, the printer must be replaced. You can contact the HP Support by clicking here and filling out the form below to see what options are available.

  Please let me know the results after following the above. If you are unable to resolve your problem, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• My HP officejet pro 8500 has more - will print from my laptop, but not by the desk top

  It prints my laptop downstairs, but not from the Office superior or smart phone. There is a Wi - Fi connection.  I tried the diagnostic tests and does not issue?

  When was the last time the devices were power cycled?

  I recommend an oil change of the full power of the system:

  Unplug the router when turned on

  * Wait 30 seconds

  * Connect Router and wait for it to reboot completely

  * Reboot the computer after the powers of the router to the top

  Unplug the printer when turned on

  Disconnect the other end of the power cord from the wall outlet

  * Wait 30 seconds

  * Plug the printer back to

  Try to print now that everything has been updated.  If the unit still does not print, then get the IP address of the printer.  This can be achieved in the Setup Menu > wireless Menu.  Check the IP address which seeks the printing software.

  * Click Start menu on PC

  * Select all programs

  * Select the HP folder

  * Select the folder for the HP Officejet Pro 8500 a A910 series

  * Select update the IP address

  Also check the information contained in the document located here.  Let me know how it goes.

• Make the OfficeJet Pro 8500 A909 series printer compatible with Windows 7 (64-bit)

  I was right, but he started from.  Could you please send me the link to make the printer compatible with my computer Windows 7 (64 bit) OJ Pro 8500 A909 series?

  Thank you

  The second link contains the complete driver giving you access to all the features of the printer.

• HP Officejet Pro 8500 A909a USB 3 questions about the configuration of the network - port USB3 problem

  Fujitsu Windows 7 laptop (all USB2)

  used the full software and installed a printer HP Officejet Pro 8500 A909a Series as a network printer.

  The printer installed fine and don't have USB connection

  All the software and scanning twain installed, so I was able to scan the copy etc.

  I could browse and choose my PC from the front panel of the printer

  However, it was Tuesday confirmed to a friend that their printer would work on a new laptop - bought the laptop

  Fujitsu - but more recent model with 3 USB ports

  I have install and then used the same FULL configured driver to be installed (V14)

  selected as a network printer and then, during the installation, I get an error hardware error USB and USB drivers

  All the USB works, that I've used - BUT the printer is networked and no USB used

  tried to download the driver and install it-exactly the same question

  SO I configure using the devices and printers 'add printer' network and installed

  I can print OK

  BUT no analysis facilities

  and on the façade - cannot see the new PC to scan to

  The only real difference, is that this PC has USB3 and only mine has USB2

  DO not know why on a network installation USB even when searching for

  It's a problem because Drivet package not has not been updated for USB3 - y at - it a patch?

  Thanks for any help / advice

  Hi etaf,.

  I guess the short answer is: Yes, the problem with the software and the 3.0 Port.

  The long answer with a possible work around is as follows: first of all, the software looks for minimum requirements. Because the software is older, he doesn't know what a 3.0 port. You are right when you say that it should work since you do not use the USB and use wireless instead, but this is not the case.

  There is something we can try, but I can't guarantee it will work. I thought first we could connect a USB cable and run the software made to force the software to see the USB port, but then the software wouldn't even get far enough because you can't plug the cable to the most later in the installation.

  My second thought and most promising suggestion is to connect the USB cable (although we do normally not until the software prompts us to) and use the installation wizard HP Print to get the insteaad of software to use the CD or download from the printer driver page. Still, I can't say with certainty that it works, but I don't see why it would not be worth a try.

  If it works, and we get the software installed you can convert the USB connection to a wireless connection using the software. Fingers crossed! Download and run the with the following link. Printer HP install wizard for Windows

  If this does not work, or you don't want to bother with it (not worth trying), I might consider getting a new model of the printer. You can even call HP. They might be able to offer a discount on a newer model. If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

• Cyan is not printing on HP Officejet Pro 8500 has more - Air bubbles in the ink tubes

  Hi all

  I know why cyan is not printing.  It is because of the following:

  Ago, I ran out of ink cyan printing ("please replace cyan before continuing").  I live in a remote area and was not able to buy a replacement cyan cartridge, so I read on a hack on the Internet, that was to fool the printer into thinking that the cyan cartridge remained inside ink (just basically restricting the measure gauge so that it read the Full cartridge).  I did it because I had a print document that requires only the black ink, so I knew that this wouldn't be a problem.  Then life happened and I completely forgot my little shortcut, and my wife printed a number of color photos.  I finally had time to cartridges, and I now understood that cyan is not print at all.  I have now opened up the printer and realize that the cyan ink tube is full of bubbles...

  I tried to fix this by printing A4 pages that are for the most part, cyan, but without success.  I even tried to put pressure on the ink cartridge cyan in order to flood the cyan ink tubes - also, it does not work.  I read somewhere that there is a way to actually get some printers to pump tubes with ink, is - it possible on the Officejet Pro 8500 has more?

  Of course, I did all the tools that are pre-set to the arsenal of 8500, but still no luck.

  I know I'm in the situation I am purely because I don't use the device as intended, and people that no one is to blame but me, but I'd appreciate any help you could provide.

  Thank you

  John

  John, looks like you have a problem with the ink system. Unfortunately, what it looks like happened here, is that your ink nozzle, tubing and probably-print head have put dry for cyan. Work around is pretty neat, but it really is only recommended for a very temporary solution. If the ink has dried in the piping, but elsewhere in the printer then can be a decent chance that this printer will be not likely reprint the cyan. You can try to run the automatic cleaning process (up to three times I would say) via the Tools menu in the Setup (the wrench).

  In addition, I'm not sure that this will be a question that has a simple resolution. Apologies, John.

  -Spencer

  PS Hope you have a wonderful day and that your time is as beautiful as she is here!

• OfficeJet Pro 8500: There is no driver for the Officejet Pro 8500 for Windows 10?

  Cannot find a driver for the Officejet Pro 8500 on Windows 10

  Former driver is blocked running.  Where is an updated driver?   Worked very well under Windows 8.1.

  Reinstall the driver of windows 8.

• HP Officejet Pro 8500 a: printers print only after the new cartridges installed

  Whenever I put in new cartridges I have problems with the print head alignment, then it usually printed.  This time, he was sitting with cartridges empty color for awhile and now it does not print at all.  I always use only the new HP cartridges.  It fails the alignment and the blue and yellow and sometimes the magenta show on the sheet alignment.  What is the print heads?  Why would I need to change them whenever I have to add ink cartridges new which makes no sense.  I have never changed them, but they worked very well until I added the new ink.

  Hey @janh1058,

  Welcome to the Forum from HP Support.  I hope you enjoy your experience here.

  I understand that e-all-in-one-HP Officejet Pro 8500 a your printer is printing is no longer.  I would like to work with you on this. I have a few suggestions that might restore your printing capabilities.

  It could be that the long period of inactivity of dormancy has dried the print head, even if you have made the right choice in leaving the cartridges installed in the printer.  I recommend you try the following basic troubleshooting steps before embarking on a manual print head cleaning more intensive:

  • Click here and clean the printhead automatically via the front panel of the printer, as shown in the second Solution.
  • Repeat three times if you still have print quality issues.
  • Remove and reinsert the cartridges once more with the printer to force the printer to print a different allignment page.
  • This to improve the print quality?

  If you use always the same question, I have a few more advanced troubleshooting tips:

  Check the status of print head warranty