OfficeJet Pro 8600: My Chromebook doesn't list my printer settings page

Similar Questions

• HP Officejet Pro 8600 more indicates 'missing or does not print head ". I followed HP 4 instruct. Help

  HP Officejet Pro 8600 more indicates 'missing or does not print head ". I did 4 HP instructions and now I'm #4: contact HP. I cleaned the heads, replaced the 4 cartridges, removed and replaced the unit restarted, everything. Now what?

  There is a document with measures to help address the missing or condition is not the print head.  This document can be found here.

  From your post, I understand that you did some the most of these steps, but run Solution 4: replace the print head.

  If you are still in warranty, HP can replace the printer/printhead without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  HP Technical Support call case form:

  https://h10025.www1.HP.com/ewfrf/wc/phoneInput?cc=us&DLC=en&LC=en&product=5061082

• OfficeJet Pro 8600 Premium head alignment all-in-one printer

  I have a new officejet Pro 8600; everytime I try to align the print head prints four monotube black red lines then there is a noise very loud and I gives me a paper jam error. I checked and double-checked and I'm sure that I removed all packaging. The printer will be page nt a pri at the time very well. But I can't use the feature in advance such as printing on both sides of the paper.

  Any suggestions would be helpful. I can not even find the 800 number in the manual.

  Thank you in advance.

  Hi mrdlf,

  I noticed your post on your Officejet Pro 8600 not align correctly and indicating a paper jam error. I'll make some suggestions for you and publish the links below. Links are to the troubleshooting guides that I hope will help you with this problem.

  I'll also post details of HP. If the steps do not help, I suggest to call the HP Technical Support to see if they have other options for you.

  Paper jam error message

  An "alignment failed" Error Message appears on the all-in-one

  Contact HP worldwide

  Good luck to you,

• After you configure the new printer Hp Officejet Pro 8625 on Windows 7, it will not print the page of 'test' I need help!

  After setting up my new printer Hp Officejet Pro 8625 on Windows 7, it will not print the Page of 'Test '.  I need help!

  Also, when I roll over the image of the printer in the task bar, he says '0' of documents, so that it does not print.

  After setting up my new printer Hp Officejet Pro 8625 on Windows 7, it will not print the Page of 'Test '.  I need help!

  Also, when I roll over the image of the printer in the task bar, he says '0' of documents, so that it does not print.

  Thanks to everyone who responded to my help regarding my Hp OJ Pro 8625.  After all, I ended up doing a clean reinstall of my MS Windows 7, and reinstalling the Hp JO 8625 Pro software and that's all working now.  Some hoe there is a glitch in my Windows 7 that did not leave the Hp software to install correctly.  Once again thank YOU ALL!

• OfficeJet Pro 8600 all-in-One connected as network printer loses connection

  In December 2011, I bought a HP Officejet Pro 8600 all-in-One to replace an Officejet 6500 as my network printer home. The 6500 worked very well on my cable, but his screen did not, I tried some of the features offered by the 8600 and I got a good price on a new warehouse of BJ. I have the 8600 connected via ethernet (not wireless), with a static IP address. All my computers on the network are running Windows XP Pro SP3 and are up-to-date with Microsoft updates. However, from one day to the next my 8600 will lose connectivity scan (Scan of the computer shows it as being disabled on all my computers at the same time, and I can't reconnect), and if I do not have anything he'll (as in a few hours) also lose connectivity impression. The only way to restore connectivity is to uninstall the HP Officejet Pro 8600 device software basis of all computers, and then reinstall the printer. I had a phone conversation and two debates with HP Technical Support; They suggested that the problem is in the firewall on the computers (but if that were the case I don't think that the loss of connectivity would occur on all computers at the same time), the IP address setting (doesn't make sense) and the printer driver is not not the latest version. I tried all the suggestions, and none of them have solved the problem. The last counselor "has raised the issue to the next level", which proved to be a Manager with no technical expertise and his only suggestion was that I have to return the printer to the merchant. I think the problem is the firmware in the printer (which, according to the 'update' on the printer option, is the latest version). Any other suggestions or experience?

  After a lot of research and find the settings that I did not know that Windows XP offered, I found that the following appear to have solved the problem I've known - at least the printer is now operational for more than 48 hours without losing printing or scan connection. Here are the steps I used:

  1. Start Control Panel  connections network and Internet

  2. Choose "network connections."

  3. Right click on "connect to the Local network.

  4. Choose "Properties".

  5. In the top window is the name of the Ethernet computer connection port, select "Configure" next to this window

  6. Select the tab labeled 'Power Management'

  7. Uncheck the box "allow the computer to turn off this device to save power".

  8. Select the "Advanced" tab

  9. Select the entry "power saving Mode".

  10. If this entry is set to change 'On' to 'Off '.

  11. Select 'OK', and then close the windows that were opened

• HP 8600 Pro - default is Fax - HP Officejet Pro 8600, how can I change the ordinary printer

  Running Win 8.  Under control panel, the print device only shown is Fax - HP Officejet Pro 8600.  In specific applications, I choose the HP Officejet Pro 8600 in the drop down menu, but this option in not avialable in the control panel to make the printer regularly by default.

  I hope I am explaining that properly.

  When you right-click on the Fax - HP Officejet Pro 8600 icon and browse to set a default done it gives the choice, if not
  Click on the printer icon and look for the properties of the server printer on the top of the page to go to tab drivers and check if it shows you only officejet Pro listed twice a 8600 8600 series and the other as a Fax.

  If you see the two that could be the problem of installation does not complete successfully. I would uninstall from Add/Remove programs to remove the entry from the server properties and install the lates SW of the website the link is below

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-3&cc=us&DLC=en&LC=en&OS=4132&product=4323659&sw_lang=

• Google cloud print for officejet pro 8600 - could not get information at hp printer.

  I just bought a new of OfficeJet Pro 8600 today. Everything seems to work perfectly except for the Google Cloud Print connector. I can print of AirPrint, as well as e-mails to the address hpeprint.com, but when I try to record using the google site, I get the error message "could not pass information on HP printer.

  The printer is connected by ethernet wireless and it seems to work find out otherwise. I have no restrictions that can send print jobs and I changed the email address for hpeprint.com several times, as suggested in other forum threads, but it can never connect to the Cloud Print service. I'm at the level of the last firmware listed on the HP website. I tried to open the connection of several PC if several web browsers though.

  It was an important factor in the purchase of this printer. Help someone?

  OK, nothing is different tonight, but it just worked. I had just opened a chat to HP support and he gave another chance just to confirm, and I came to the page "registration successful". Prints crossed chrome without any problem. I made no changes to the printer, PC, or network. So, the best advice I can give is - it wait a few days... If all goes well, he continues to work :-)

• HP Officejet Pro 8600 + "there is a problem with the printer or the ink system... »

  I have a HP Officejet Pro 8600 + which is coming up with an error message. This just happened out of the Blue yesterday. The printer is a little older than a year.

  It is said:

  "There is a problem with the printer or ink system. Printhead not missing not detected incorectly installed or incompatible.

  I've deleted and reinstalled ink cartridges, head, unplugged, cleaned up, etc etc.

  HP Officejet Pro 8600 +.

  Product number CM750A
  Sequence number {content removed}
  Not under warranty

  Please notify.

  I'm sorry that you are experiencing this issue. Here is a link that can help you with the ink system.
  http://goo.GL/BXDFf
  
  It seems to be a bad printhead, or it needs manually cleaned with water and lint. If these steps do not resolve the problem, contact HP (1800-474-6836) support.

• OfficeJet Pro 8600. How can I configure default printer 2 faces to avoid the re-creation of each print job?

  You need to change the default value of the print side single 2-sided print OfficeJet Pro 8600 running on iMac OS X 10.6.8? I can print 2 sides but don't know how to do as a default value. Need help.

  Hello

  A preset is an option provided by the OS X print dialog allowing you thus save print settings used.

  1. Open the file that you want to print.
  2. In the menu file , cclick Print. The print dialog box appears.
  3. Change the print settings to perform a duplex print job.
  4. On top of the print just after the name of the printer dialogue box, you will find the menu presets.
  5. Open the presets menu, and then select Save settings as a preset.
  6. Assign any name to save the preset, and then click OK.

  Now the saved preset settings will by default be used until any other preset is selected.

  Hopefully it's clearer now,

  Shlomi

• OfficeJet pro 8600: my two network printers has stopped printing

  I have two printers officejet pro 8600 in my house. All of a sudden both are not available from any laptop or mac on the network. This issue is not isolated to a single laptop or a printer. Printers are online and have an IP address. However, if I type the IP address in a browser, it can not be found. If I use the function "" update IP address"and run a search, it fails. I am certainly on the same network.  I always can email docs to my address hpeprint. Please advise...

  Turn off the printer and router. Turn on the router and wait 3 minutes. Now the power on the printer and wait they connect to your router, check. Try now.

• OfficeJet Pro 8600 wants fax info when asked to print

  OfficeJet Pro 8600 prints test page ok, but do not print anything My Documents or a receipt from a purchase online.  A screen will appear with corner 'Send fax' at the top left, boxes of 'to', 'add a cover page', 'Add scan' and 'settings '.  There is no error message or the number.  Tried to remove and reinstall the printer drivers and.  Worked fine for 2 months, then started it.  It is not connected to a phone line and has never been used for faxing.  It is connected to the wireless computer network.  Tried to connect to the network with cord - also not able to print.  Any help appreciated.

  Hello

  I guess that the fax printer is set as default, download and execute HP Print and Scan the link below Dr utility.

  www.HP.com/go/Tools

• Officeject Pro 8600 Plus: Officejet Pro 8600 will copy in color but not print in color

  I have an Officejet Pro 8600 Plus able to make copies of color, but it will not print in color of my office.  My printer uses the version of the firmware CLP1CN1416AR.  When I go to print a document in color, I go to the properties of the printer and then advanced and set print in grayscale on Off, but I get still only prints in grayscale.

  Thanks for your suggestions Zac.

  1. we have tried using several different programs (paint, Microsoft Word, Adobe Acrobat, a test of the printer properties page, etc.), but all printed only in grayscale.

  2. it's connected via Ethernet cable to our Wi - Fi wireless router and then to our laptop.

  3. the ink levels are all above 40%.

  I had already tried electric bike on the printer several times as well as the computer, which did not help.  I tried to change the printer settings default to print in gray and then changed them back to the color, but that did not help either.  I tried resetting the printer, mentioned in another thread (unplug the power cord at the back of the printer, while he was conducting, then unplug the power transformer in the decision-making, hold button power printer for 60 seconds, then reconnect the), but which did not help either.  Finally, I uninstalled the Windows printer and reinstalled a couple of times, and finally, it started working properly again, so, apparently, there was a problem with the driver who eventually got cleared up by reinstalling the printer/software/drivers.

  Josh

• HP OfficeJet Pro 8600 N911a, no PC Interface to the printer

  Win 7 Home Premium, 32-bit and 64-bit PCs, wireless connection to the printer OfficeJet Pro 8600 N911a.

  When clicking on the icon of the desktop printer, or to access the HP program in the start menu, MS Notepad opens the interface instead of the interface coding. It's a constant problem since the installation of the software in November 2012. The software has been installed on all three 3 PCs with the disc that came with the printer. All three 3 PCs suffer the same problem of no interface, only Noptpad with the code.

  I uninstalled the drivers and firmware (using Revo) completely and reinstalled from the HP Support download site. The problem remains.

  The interface of Scan function works perfectly in the start menu.

  Other than that, the printer works fine when access to it to print from the sites, as well as the printer works perfectly with all functions when using the control panel touchscreen printer.

  Any suggestions or help appreciated.

  Bob

  Hi Bobhist,

  I understand that you have a 8600 Officejet which is not able to open the wizard in the printer on 3 different computers. I'm sorry to hear what is happening, but I'd be happy to help you!

  I would recommend you have a look through this HP Printer Wizard opens with an error in Script or in Notepad and you should then be able to use everything as planned.

  Hope this helps, have a nice week end

• HP Officejet Pro 8600 Plus: I'm trying to troubleshoot printer with Windows 10.

  I removed my original pilot, launched my CD orig who downloaded correctly.  When I go to find in my device Mgr it sees and as to continue through the wizard to add to my HP Pavilion he asks that I add the "WPS" I can't find it anywhere in my manual or my printer.  How can I get my WPS so I continue and restore this printer with Windows 10 settings?  Then I should be able to download your drivers 'full foot' and the laptop talk to the printer (at least I hope it's going to happen).  Currently you can only print via USB then please get back to me with an answer as soon as possible.

  Hello

  The CD may be a little old. Please download and install the software and the following driver on your Windows 10 computers (new or updated):

  http://ftp.HP.com/pub/softlib/software12/COL40120/bi-108858-4/OJ8600_1315-1.exe

  Kind regards.

• HP Officejet Pro 8600 Plus-comment do to stop unwanted printing

  My printer prints daily folded, etc. and I don't want them. What should I do to disable this feature.

  Touch the front panel, touch applications, scroll to find uCrossword click on the checkbox for 'Pause' printing, then press the left arrow to return to the main menu.

  You can also set preferences to the http://www.ePrintCenter.com.