OfficeJet Pro 8610: lines when copying

Similar Questions

• OfficeJet Pro 8600 Premium: When copying from the plateau the copier will print only 1/8 of page, then stop.

  Copier is towards the top sometimes & don't print that page of bucket 1/8, Athens he spits as if this one ends. Have unplugged the power cord & reconnected. Ran scans printhead & alignment. Off all night. All the ink levels are good. Still has not corrected it.

  Print an entire page of the screen of the computer without problem. Printing problem just go flat.

  Hi @Wendy-needshelp,.

  Thanks for joining the Forums of HP Support for a solution to your problem copying.

  I understand that you use a HP Officejet Pro 8600 Premium e-all-in-one with a computer and Windows 7 when you copy from sometimes flat it will only copy and print 1/8 of the page. I would like to help.

  You mentioned having unplugged and replugged the power cord. This is something that could be done. If you can, I reset the power and try to connect the printer directly to a wall outlet, if you currently use a protector or electrical surge extention. Sometimes the surge protectors can limit the amout of the power supplied to the printer.

  

  There was an update firmware released in April, which can help your printer. You can download the update of the firmware and run it from your computer to install it on the printer. You can go to the HP Officejet Pro 8600 N911g_n Firmware download page by clicking here.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• How can I change the language on my Officejet pro 8610?

  Today, I got a new Officejet pro 8610. When I walk I accidentally put in place with Arabic as a language. How can I reset it for English - don't forget that everything on the screen is in Arabic. I know that the theory of what to do. I need to go through the Setup and I can recognize the icon for this but what choices to make in the following screens?

  Advice would be welcome.

  p_m_b wrote:

  Today, I got a new Officejet pro 8610. When I walk I accidentally put in place with Arabic as a language. How can I reset it for English - don't forget that everything on the screen is in Arabic. I know that the theory of what to do. I need to go through the Setup and I can recognize the icon for this but what choices to make in the following screens?

  Advice would be welcome.

  I managed to answer my own question. I installed the software on my computer and then connected it by usb. My computer came next with asking me what language and location, I tried - showing the Lebanon and Arabic as the default value. I chose UK and English, and that's the officejet changed language on its screen.

  Panic at the wire. I even beat the HP support counselor who promised to get the Arab Department to advise me!

• HP Officejet Pro 8600 more black vertical line when copy or scan

  HP Officejet Pro 8600 more black vertical line when copy or scan everything in the middle of the page

  Hi Clementstl,

  I understand that you have a 8600 Pro Officejet which puts a black vertical line in the center of your copies/scans. I'm sorry to hear you had to deal with this, but I will certainly do my best to help you solve this problem.

  I recommend the rest of this document of vertical stripes, lines or streaks in the Copies, faxes or Scans as it should be in a position to help to cross that line. The most common cause is a small spot of something on the glass of the scanner, so just make sure that when you're cleaning use you as much elbow grease you can collect

  Just to clarify a little further, if the problem only seems to occur when you use the automatic document feeder, you'll want to focus your attention on the small strip of glass that he uses on the left side. If it only occurs when you use the flat glass, you want to concentrate on the large piece of glass he uses.

  Hope this helps, have a nice day!

• HP Officejet Pro 8600 - black lines when copying, colored scanning lines

  Hello

  I have a HP Officejet Pro 8600. When I try to copy from glass, copy of ADF, I get black lines going the length of the pages. Whenver I scan, once more, the glass or ADF I get lines colored, ranging from the length of the analysis. I called HP customer service and the representative told me clean the glass and part inside of the ADF, but the problem still remains. No idea if this is a common problem? More important still, how fix it.

  Do a hard rest on the printer. Let the printer and unplug the power cord. In doing so, it will remove the lines.

  When a solution is found, please indicate the position that solves your problem.

  If I have solved your problem, please do not hesitate to provide laurels and make sure that you mark this thread as provided solution!
  Although I work for HP, my messages and responses are my own opinion and not of HP

  Valerie, printer Agent

• HP Officejet Pro more than 8600: HP Officejet Pro 8600 more black vertical line when copy or scan with automatic feeding

  HP Officejet Pro 8600 more black vertical line when copying or scanning using auto flow only.  It works very well on the flat.

  It is now resolved.  It seems that there is a strip of glass that is used for the automatic copy of power and research.  The glass has a note on it that I cleaned which solved my problem of vertical line.

• OfficeJet pro 8610: copy question

  I am aware of both a pages facing two options on back page. Now, I'm trying to figure out if I can copy two pages in front of two pages by using the Officejet pro 8610.

  Hello

  The HP Officejet 8610 does not support automatic double-sided copy of a centre but only duplex printing.

  The duplex is only available model 8620 or 8630.

  You can use the HP scanner software to scan document manual duplex print it to work around the problem.

  You can find the specifications of the product below:

  http://store.HP.com/webapp/WCS/stores/servlet/us/en/HP-OfficeJet-Pro-8610-e-all-in-one-printer?JumpID=oc_r1002_usen_c-001_r0002

  Shlomi

• HP OfficeJet Pro 8610: HP settlement 8610 requires Attention, when you try to print 4 x 6 photos

  Good,

  After reading so many others and worth that they have with this issue, I submit to you that this could be a serious problem.

  I have an impression of this printer using any software problem, if I try to select the paper size of 4 x 6 or the "Photo paper" options in the printer settings.

  The best part is the error message I receive Windows 8.1. It is said that the printer "to monitor". There is no pop up n the printer as a mistake and nothing in the screen "Control Panel\All Control Panel Items\Devices and Printers\HP Officejet Pro 8610 (network)" on an error.

  Any help would be greatly appreciated. And do not pull the shit 'check the paper tray' here... I checked about 12 hours of your support help documents and I'm tired of seeing this document as the solution to the problem. This is not it.

  Also, I don't want to hear, which does not support the format of paper. The software driver has several options of stock of photo paper and several sizes...

  What's next? That's what I want to know... What's next?

  Alrighty then...

  I don't know what I did differently, but it seems to be the impression this morning. Totally weird, but happy that he woke up!

  Thanks to all who have offered solutions...

  Laughing out loud

• OfficeJet Pro 8610: When you print on Officejet Pro 8610 envelopes

  I try to print an 8.5 "x 5.25" envelope on an Officejet Pro with the Hallmark Card Studio 8610 but he always says that a paper mismatch.  Help, please!

  Hello

  Did you define and chose the specific size as a custom paper format?

  This isn't a standard envelope size and it is not offered by the default driver.

  Follow these steps to define a custom paper size

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8610-e-all-in-one-printer-series/5367603/model/5367606/document/c03890386/

  Then go to printing options, click Advanced and select the size configured for the pilot.

• HP Officejet Pro 8610: Printer paper mangles

  I bought a HP Officejet Pro 8610 a few months ago to use mainly for scanning and copying for a home business.  I could not get the printer to print a sheet of paper without deformation of paper and printing things on an angle.  I use paper nine of a ream of fees.  I tried to reload the paper, using less paper in the tray, using more paper in the tray, etc.  My main Canon printer has recently died, and now I have to be able to print business documents and controls on my HP printer.  Any suggestions?

  @Suepatpi

  Welcome to the Community Forum of HP.

  A few ideas

  ========================================================

  The printer may need to be aligned after you do not use as a regular printer for a long time.

  Problems print quality for the e-all-in-one printer series HP Officejet Pro 8610, 8620, 8630, 8640 and 8660

  Down 2/3 of the way through the document, find "step 4: calibrate the line break"-you want to complete it!

  ========================================================

  Belle is not usable equal

  The HP 8610 can care for the moisture content of the paper, or maybe the printer doesn't like the weight of the paper you are trying to use.  This is the simpler, more straightforward answer.

  Assuming that you selected correctly before the type of media in the printing preferences for the printer knows what kind of paper to expect and how to react - the printer is maybe not able to manage this particular test.  If this is the case, and regardless of the perception of the quality of the paper, there is no way to force the printer to accept this document.  It is not a question of "bad paper" - it is a question of how the printer sensors respond to the book.

  Beautiful paper is not always equal paper which is printed on each printer.  HP printers are not the only picky ones in the world.  All printers of high quality can respond to the report in this way.  You don't have to use paper HP, is told by the way.   Try different papers.  Place this paper somewhere cool and dry to store and try again later.

  ----------------------------------------------------------------------------

  Printing preferences

  If you have not already done so, you can set the media type in printing preferences.

  Setting the media Type tells the printer what kind of paper be expected; the printer sets the reels and the spring tension to pull the paper into the printer correctly.

  Printing options

  ----------------------------------------------------------------------------

  The case of the order of the missing pages

  You mentioned something in passing that might be important:

  You will use your OfficeJet 8610 to print checks.

  If printing of cheques requires a feature 'Page Order' of the printer, you may be interested in the following:

  Printing options

  See the entitled subject

  • Page order - front to back / back to front
  • • Option 1: Use the OfficeJet Pro 8600 driver

  ----------------------------------------------------------------------------

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• OfficeJet Pro 8610 do not print documents to MS Word

  Hello

  I am owner of an all-in-One 8610 Offijet Pro. It was working fine until this day. Suddenly he stopped printing MS Word 2007 documents. It works fine with other applications (Acrobat, Autocad, etc.).

  I've uninstalled and reinstalled the drivers several times, used HP difficulty application, used the application microsoft Fix, I tried printing on Office 2013, but nothing happens.

  Whenever I try to print a .doc I get a page with a code on it and another filled with dark horizontal lines.

  Hey @Fatalouch,

  Welcome to the Forums of HP Support!

  I would like to help you today to resolve printing problems that you are having with MS Word documents when printing to the printer all-in-one HP Officejet Pro 8610. I understand that you already have many of the recommended troubleshooting steps, and I thank you for all the information, including in your message. I'll suggest a few steps additional troubleshooting here. I know that you have already run uninstall it and reinstall your product several times, but please run the step-by-step instructions below:

  Step 1: Uninstall the drivers:

  Because you have not specified what operating system you use on your computer, I'll provide you with the document on how to uninstall properly. Please click on this support document and simply choose the operating system you are using. If you are unsure about what your operating system, refer to: what is my OS?

  Uninstalling the printer software

  Step 2: Delete the Temp folder:

  1. Open your Start menu and in the box "search programs and files", type %temp% , and then press enter.
  2. When the Temp folder opens, select Ctrl + A at the same time on your keyboard
  3. Once everything is highlighted in the Temp folder select "delete" on your keyboard to delete the files in the Temp folder. No files and folders on your computer will be deleted. This only deletes temporary files. If a file is always be used by a program on your keyboard will rise pop to 'jump' the item.
  4. Once the temporary files are deleted to close the window
  5. On your desktop, right click on the recycling bin and select empty recycling bin

  Step 3: Reinstall the drivers:

  Please select the link below to download the appropriate printer drivers:

  E all-in-one HP Officejet Pro 8610 Printer series full feature software and drivers

  Once you download the driver package allow the download to run.

  1. The installer gets to 100% and then launch the installation screen
  2. Do run installation instructions step by step to reinstall your printer
  3. Once the product is reinstalled correctly, proceed to the next step.

  Step 4: Change of driver:

  Now that the correct driver is reinstalled I'm going you have change the pilot of another driver for the Officejet 8600 series which should solve this problem.

  Please select the following link for the driver: HP Officejet Pro Basic print and scan Driver

  1. Allow the driver to download it and run it
  2. Once extraction is complete the installer can launch, please close the window installation
  3. Go to your Start menu and in the "search programs and files" box type % temp % and click enter
  4. Once the Temp folder opens, click the newer 7z folder. It should include OJ8600 or OJ860 files in what it says.
  5. At the top of this file, you will see the path to the file. It may show something like "computer - local disk c-users appdata - local - Temp - 7z...'.
  6. Make a left click on the right side of the path of file at the top bar and everything should highlight in this bar. Then right click on the bar and copy the path of the selected file.
  7. Close the Temp folder
  8. Click on the start menu, then select devices and printers
  9. In the devices folder and printers, click with the right button on your Officejet 8610 and left click on printer properties
  10. Left click on the Advanced tab
  11. Left-click on new driver
  12. When the new window driver opens just hit 'next' until you see a list of manufacturers on the left and a list of printers on the right.
  13. Click the "disk" button at the bottom right
  14. When the "Browse" window opens, simply right click in the path of the file bar and select "Paste" to paste the path of the file that we copied earlier. Click OK.
  15. When prompted choose the 8600 Officejet printer and click Next until the pilot add windows close.
  16. Under the printer properties window, select 'Apply' but do not hit OK
  17. Select the general tab
  18. Rename your printer in HP Officejet 8610
  19. Click OK

  Now, try to print from MS Word!

  Please let me know if the other pilot solves your printing problems. Should you still be questions be sure to meet with your operating system so that I can further steps offered. Good luck!

• Install OfficeJet Pro 8610 on Windows Server 2012

  Hello

  I'm trying to install the drivers for a Pro OfficeJet 8610 on a system running Windows Server 2012. I installed the drivers from here (after choosing Windows 2012 for the operating system): http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-Pro-8610-e-All-in-One-Printer-series/53...

  First of all, I tried to install using the GUI (Setup.exe) but ran into an error indicating that the operating system was not compatible.

  I did some research and discovered that these drivers must be installed by using the command line and the command msiexec.exe. I tried to do it by using the following command-line (with administrator privileges): msiexec.exe /i PATHTOMSI

  However, when I do that, it gives me ALWAYS an error of incompatible operating system. Don't know what to do here.

  Here is a link to the Post on the HP Forum explaining the need for a command line install: http://h30434.www3.hp.com/t5/LaserJet-Printing/installing-Pro-8610-Windows-server-2008rt-X64/m-p/426...

  Thank you.

  I ended up soliving this problem myself while tinkering around.

  I went through the process of adding a new printer through the devices window and printers.

  I said my printer was not listend so opted to manually configure a printer. I have created a new local port and he just called the name of the printer. He then invited for drivers. I chose the disc and then navigated to the folder where I had extracted the printer drivers. Selected this file and the drivers installed.

  This example gets the drivers installed in the system. Windows should then automatically recognize/install the printer if it is plugged.

  Mind you, I had to do that only for printing on a desktop connection remote. If you need the real HP software installed to print AND scan, this will not work for this.

• OfficeJet Pro 8610: No desktop Windows 7 printing and Officejet Pro 8610

  I bought and installed a new 8610 Officejet Pro about a month ago.  My desktop computer is a unit of HP Windows 7.  The printer is wireless.

  Until a few days ago, everything worked fine, but now I can't print anything from my desktop computer.  Printing from my computer MacBook laptop works very well.  Printing from my iphone is fine.  Digitization of the desktop computer is fine.  Webprinting is fine.  The printer icon has a nice green checkmark in the devices folder.

  I ran printing HP and doctor Scan, which claims to solve a problem of port, but does not solve the problem.

  I use windows to troubleshoot the connection, claiming to make the printer available to my homegroup, but it does not solve the problem.

  I tried to change the security settings for the spooler.  Has not solved the problem.

  I can not manually stop and star the spooler via prompt back.  Said system 5, access denied error.

  It's maddening.  I got rid of my old printer (which must be printed from the office) so that I could have a capacity of wireless printing, and now I have the ability wireless, but impossible to print from my desktop.  Aaaaggghhhhhh!

  Hey @steplaw,

  Thanks for getting back to me on this subject. Now I'll have to charge you another Officejet driver on your product. Because the network connection is fine, and scanning is still fine, I do not think that the problem you are experiencing is connectivity or related software. This driver replacement, I'll have to charge you will work exactly the same way as the e-all-in-one printer driver Officejet Pro 8610. Therefore, you won't lose all the features by this fix. Please, try the following steps.

  Step 1: Clear the temporary files:

  1. Click on the Start menu
  2. In the box "search programs and files" located just above to start after you click on it, type %temp% , and then press enter on your keyboard
  3. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  4. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  5. Close the Temp folder when it is empty
  6. Right-click the recycling bin on your desktop and select empty recycling bin

  Please proceed to the next step.

  Step 2: Load driver replacing:

  1. Please click hereto download the Officejet driver
  2. Once the download is complete, you can get a command prompt to run the download. If you see the prompt run, please let it run.
  3. An extraction should now take place. When the extraction is complete, an install window can jump open. Please close windows install everything. You do not want to run a facility.
  4. Then, click on the Start menu. In the box "search programs and files" type folder and press enter on your keyboard
  5. When the Temp folder opens, find the file 7z. Click this folder to open it. It should include files that say OJ860
  6. At the top of this file, you will see a file path bar. It may show something like "computer - disc Local C - users - AppData - Local - Temp - 7z... " Left click on the right side of this path to file on the top bar. The path should now highlight.
  7. Right click on the highlighted file path and select copy
  8. Close the Temp folder
  9. Click on the Start menu
  10. Select the devices and printers
  11. Right click on your HP Officejet 8610
  12. Left click on printer properties
  13. Left click on the Advanced tab
  14. Left-click on new driver
  15. When the new window opens driver hit please 'Next' until you see a list of manufacturers and Printers
  16. Click the "disk" button at the bottom right
  17. When the "install from disk" window opens, we simply right click on the file path bar and 'Paste' in the path to the copied file previously.
  18. Click OK
  19. When prompted choose the HP Officejet 8600 printer and click "Next" until the driver window add farm
  20. Under printer properties , select apply, but don't hit not OK
  21. Select the general tab
  22. Rename your printer in HP Officejet Pro 8610
  23. Click OK

  Now that the other pilot Officejet was responsible, please test print in order to confirm if the printing problem is resolved.

  Please let me know if the steps I have provided resolve your printing problem. Good luck!

• HP Officejet Pro 8610: HP Officejet pro not connected 8610

  I have a new modem and children router Duel.    Router is Lynksis EA3500 with capacity of 2.4 Ghz and 5 Ghz.   You just bought a new HP Officejet Pro 8610 which I learned now will only work on a 2.4 GHz system.   When I connect the printer to the wireless system, it stops the 5 GHz network.   It starts all other devices.   These devices can join the 2.4 GHz but can see is even more the 5.0 GHz network.   Is not acceptable.

  Do I need another printer, or can it be fixed?   I don't understand why the printer will not run on the 2.4, but allow only laptops, televisions and office use the 5 GHz range.   Ridiculous.

  I spent 1: 30 on the phone with Lynksis first, and they checked the router works perfectly.   Then I spent 2 hours talking to HP in India and they just said sorry we will say HP to make this printer capable of 5.0 in the future.

  Not good - ready to return the printer.   Another option?

  Thanks Eric

  I just got the phone with Lynksis and they fixed the problem caused by the HP support line.  HP support line put me on the wrong channel widths.   Lynksis immediately saw the problem.  So after day LOOOONNNG computers and laptops are back on 5.0 and the printer is on 2.4.   Just surprised that the HP support service was unfamiliar with the issue and so ready to tell me that the computers will simply stay on 2.4 if they wanted to be connected to a printer.

  Thank you Eric student honor.

• OfficeJet Pro 8610 - error setting up Fax Wizard I don't use a proper phone cord

  I have a single line by Time Warner Cable telephone system that is a set which includes the cable TV, internet connection of road runner and digital phone. I use a system of wireless phone with a stand-alone answering machine which works very well.

  I'll just put up my new printer Officejet Pro 8610 and crossed the Fax Setup Wizard to use my voice single line telephone and fax system just as I did with my old HP Multifunction printer it replaces.

  Everything seemed to connect and to work very well when one had the Fax Wizard to perform the test at the end of the installation procedure. As a precaution, I ran the consecutive times to test with the answering machine turned on and turned off and twice he spent in all categories, and once it failed to indicate that the phone cord was not the right kind.

  I used the RJ11 cable supplied with the printer, but it wasn't enough long reach the phone in the wall jack that I connected an additional RJ11 cord so it would reach. So the two cords to have only 2 pods as they should.

  I am trying to determine why I get together and pass and fails with the same set up?  If I need one RJ11 telephone plug cord in the wall to the printer?  Or am I running a subsequent wizard test too soon after a previous?

  I would appreciate any comments or suggestions about the reason that I feel this inconsistency.

  Thank you

  Hi coollx,

  Welcome to the HP Forums!

  I understand that your HP Officejet pro 8610 is indicating that you are using the wrong phone cord. I'm happy to help you with this problem of Fax!

  It is possible that what you need is a cord of unique phone from the telephone jack in the wall to the printer.

  I recommend to read these faxes guides:

  • How to connect your fax HP to a line ISDN, ADSL, PBX or VoIP device.
  • Can't send or receive faxes.

  I hope this information helps and thank you for posting!