: Officejet Pro printer Officejet Pro 6230 6230

Similar Questions

• HP Officejet Pro 6230: validation failed to print on printer HP Officejet Pro x 64 series

  Why I get the message"Validation of the printer failure '? It worked very well, but as soon as my warranty expired, my printer isin can't work, not AT ALL.

  I bought the new ink through the HP online store and it is unusable because of this problem of 'Validation '.

  Can someone help me please?

  HP Officejet Pro 6230 x Series

  Service ID: 25077

  Serial number: [personal information]

  Firmware version: AGP1FN1423AR

  Hi @lowpro50,

  I would uninstall all the software for the printer. Here is a document of support for reference, if needed - uninstalling the software of the printer (Windows).

  Try using the HP printer installation wizard to install the software. This tool with to find the most recent version of the printer software and help with the installation.

  If it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

• OfficeJet Pro 6230: Officejet Pro 6230 continous (not of paper) paper jam error

  As soon as the printer powers on it the ink carrier Wizz backward real quick (as he struggles to move) and then gives me a paper jam error (the resume light flashes and error appears on my screen). He did the same thing when I try to print anything (including the status report page).

  When I up the access panel upward (power on), the carrier of ink isn't even move to ink cartridges which can be changed. I try to move with force, but it does not move (if I use more strength, somethings will break). Ink is a bit new, so I don't know it still has ink in there.

  The steps I've tried:

  plugged the power supply into the wall outlet

  roller cleaning

  THERE IS NO PAPER or PAPER PIECES BETWEEN ROLLERS (I checked like 20 times)

  reset the printer

  There is a large black gear coupled to a white average speed on the left side near the bottom of the printer. I manually drove the speed by pressing (rotation) of North (or forward or to the rear of the printer) for a few seconds and once I did that. the ink carrier was able to move as it's supposed to, and I could see the ink. but once the power is back on, the carrier of ink was in the locked position and fights again and gives me the paper jam error.

  I don't have really any troubleshooting documents on the CV online on how to fix a jammed media of ink and clearing paper jams, so I'm out of options.

  It is plugged into USB

  The main problem is the paper jam error.

  I don't know if the stuck carrier of ink is the cause.

  Hi @Comp-Tech.

  Thank you for joining the HP Forums!

  I noticed your post that your printer HP Officejet pro 6230 receives a constant paper jam error. I'm happy to help you!

  Since you did all the steps already to troubleshooting in this guide, A 'transport Jam' Error Messageand this guide, "Problem of tray or paper jam" Error Message appears, as well as the reset of the printer. The next step is to fix the printer / or replaced.

  Please Contact HP phone support for assistance. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  Best regards!

• HP Officejet Pro 6230: HP Officejet Pro 6230 problem

  My officejet pro 6230 has all the lights above the ink colors flashes way slowly from left to right. The printer will not connect to our wireless network and is not recognized by the computer. This all happened after the replacement of all the ink cartridges. Any help would be greatly appreciated. Thank you

  Hi user,

  It seems that your print head problem.

  HP released the document for that matter. Please follow the document to solve the problem.

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-6230-ePrinter-series/5390318/model/5390319/document/c04839288/

  Hope this will help solve the problem.

• OfficeJet Pro 6230: Officejet Pro 6230

  How can I find what is in Q on my printer?

  Hello

  From the Control Panel, click on devices and printers.

  Right-click the Officejet Pro 6230 ICO and then click on see what's printing.

  The print queue will appear on this screen.

  Shlomi

• HP OFFICEJET PRO 6230: Best way to change the settings WIFI on HP OFFICEJET PRO 6230

  Hi all

  Just after some advice about this printer. It's the printer be mobile , so it can be taken with the Member of staff, connected to wifi where they are and then the group they present to can do impressions of him through their ipads (via AirPrint).

  This all works well 'in House' connected to our wireless network. Have set up the printer wireless via the software installed on their laptop computer (with a USB cable to transfer the settings of the printer), but y at - it an EASY way to change the SSID and password wifi when they are there in the area? I know you can hold down the button "wifi" on the printer for three seconds (until the wireless flashes) then hold down the button "WPS" about to access/reuter and they have a link but it's only if WPS is available and that the staff member can access the reuter/access point.

  They will have their laptops with them and USB cable in order to re - set the SSID and password, but seems a bit lengthy to go by "connect a new printer" for each site they visit. Is the right way to do it or there at - it another way 'over easy' I forgot. I guess also here the printer remembers SSID/passwords so that there be set up a time for a given location and then will be "auto-connect" if they come back? Is this correct?

  Any help on this is much appreciated.

  See you soon,.

  Andy

  Not the printer that you want to do.  Here is the Guide of the user for you to read on your wireless options.

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-6230-ePrinter-series/5390318/model/5390319/manuals/

  You will need to run the configuration each time to connect software.  You could try Direct another wireless to connect to the printer.  You need a printer with a Panel for configuration complete front so you can easily change the SSID.

  Whatever it is, everyone will have to load the software in order to use the printer.  It can automatically connect, but do not count on it.

• DeskJet Pro 6230: double-sided printing

  Recently should a printer 6230. First time I tried duplex printing, it was fine.

  Now just prints individual sheets (no double-sided). Desktop HP printer Assistant does not work that he doesn't show me the pages of help on any topic at all.

  Help appreciated.

  Thanks for letting me know that damienfosseyof information.

  It looks like a software problem.

  You could always restore the printer in when everything worked correctly.

  How to use Windows system restore?

  I suggest to uninstall and then disable all the start up programs and temporarily disable the Antivirus software to see if that is causing the problem. How to use MSCONFIG. Click the Startup tab and click Disable all.

  Reinstall the most recent drivers. Series of HP Officejet Pro 6230 full feature software and drivers ePrinter.

  Ask OKI Print this Long edge of page and print short edge explained.

  I hope this helps. Thank you.

• Office jet pro 6230: office jet pro 6230

  I have a new officejet pro 6230 and the lights indicate a print head problem.  I changed the cartridges, powered it on and off and still get the flashing lights.  I looked up the authorized service centers and there is not less than 1000 miles of Cleveland OH. (go figure).  I bought the printer at Amazon and hoping not to have to return it.  Does anyone have suggestions as to where to fix as it is under warranty or how to solve the problems of flashing light?  Thank you.

  I had a similar problem with a HP 8500 - and I followed the suggestion to replace the print (for a cost of US $130) TWO heads!  Unsurprisingly, after that the HP ALWAYS had the same problem.  I did some research on the problems of print head on this site and found out that in all cases (that I found) was the ONLY way that the problem has been resolved by completely replacing the printer.  Unfortunately, mine was out of warranty.

  But, since yours is still under warranty, my suggestion is to contact HP customer support - they will be able to tell you what they can do for you in respect of the guarantee: Contact HP customer care. HP® customer support

  If you feel that my suggestions helped you, please click on the Thumbs-Up symbol; If they helped to solve your problem, please click "accept as a Solution.
  
  I'm a volunteer and I do not work for, or represent, HP.

• OfficeJet Pro 6230: Print head: missing, defective or Incompatible

  

  I have a 3 month old printer Officejet 6230 Pro who now will not be printed.  I get this message: "print head: missing, defective or Incompatible.

  I tried:

  (1) the printer reset

  (2) I have genuine HP cartridges

  (3) removed, cleaned and replaced cartridges

  (4) Firmware update

  I cannot perform a "print head cleaning" or something like that.  I get the message "printer is busy. Try again later. »

  What else can I try?  How can I get this printer working again?

  This problem has been resolved.  Chat with support.  They ship me a replacement printer

• HP Officejet Pro 6230: Install printer drivers when no internet connection

  I need to install the base for a 6230 OJPro on a PC printer driver that has no Internet connection.

  The HP installation wizard insists to request registration information (e.g., zip code), then try to go online to return it to HP.  While the PC is connected to a network, there is no Internet connection, and the installer crashes.

  I get a Dr. Watson dialog box (I cancel), and then the Setup Wizard tries to go online (new) to find a solution to the accident.

  Is it possible to install the printer driver, but not request registration information and/or jump to go online to register?

  I did find a guide the administrator (or similar) which offers etc command line switches for changing the behavior of the installation wizard to do this.

  Thank you

  @John-Smith,

  Thanks for the clarification. I went ahead and installed the basic printing software on my lab and managed to make some changes in the installer so that it automatically opens the online registration. See below:

  Open the basic software download, click on the next button until you get the facility agreements and settings, here you have to click on the link that I've highlighted for you, see the image below:

  

  Now once here, please uncheck the option I have pointed out, you can also choose to disable the other options here, I'll leave to you. See the image below:

  

  Once you have unchecked the box to register online, click Next and continue with the installation.

  This aid? I look forward to hear from you.

  Thank you once again, if you want to say thanks for my effort to help, click on the "Thumbs up" to give me a "Bravo".

• OfficeJet Pro 6230: Error Message: incompatible print heads

  The printer is not even a month and has worked perfectly, until last week when he simply stopped Mid-print page. There are no jams, no flashing lights, it just stopped printing. I turned it and turn it back on and that's when the ink lights began flashing. First there was black ink, which I changed with a new cartridge (even though I know that the configuration it was not empty). Then each colored ink lights began flashing. I replaced all four cartridges with the new HP ink and the Scan doctor says that the print heads are alternately missing, damaged or incompatible. The message passes whenever I check. I am at a loss and impossible even to contact someone to get this repaired thing (because it is still under warranty).

  None of the troubleshooting techniques worked. I had all the tried before they have been suggested, so I ended up contact HP and receiving a replacement printer. We'll see how it goes.

• OfficeJet pro 6230: officejet pro 6230only print portrait

  Despite the definition of the printer in landscape mode impressions always come out in portrait mode. Any ideas on a solution please

  Hi SubDel3,

  I'm glad that the other pilot has solved your problem!

  Please consider marking 4 Message like "Accept as Solution" so that someone else in the community who may encounter this problem can more easily find the solution.

  Best regards!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

• OfficeJet Pro 6230: Officejet Pro 6230 fault

  I am trying to print and get all the lights of cartridge from in order from left to right.

  What is a print head fault? If so, it's the second fault that I lived on a printer HP inkjet in as many weeks!

  This printer - just like the other who has since been replaced - less than 1 year

  Hello
  Welcome to the HP community @LincolnIBC,
  
  I saw your post on the cartridge on your Officejet 6230 lights and wanted soft hand with my suggestions. Personally, I would try a reset and make sure that the printer is connected directly to a wall outlet, turn on the printer again and try to print.

  If there are errors, let me know and I'll check to see if there is more troubleshooting to try!

  Reset:

  With the printer, unplug the power cord at the back of the unit.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the unit.
  If the printer does not by itself, press the Power button to turn it on.
  
  See the satisfaction for my attempt to help you today, click on the thumbnails below. Click on the 'accept as Solution' If the problem has been resolved, please and thank you!
  
  Have a great day,

• officjet pro 6230: 6230 failing with photos pasted into word

  my new officejetpro 6230 prints the word text OK but loses a part of any image pasted in Word (as if the image were big)

  the 'photos' in question are getting cards

  My Word is the version of MS Office 7

  (everything works fine in my old Deskjet 6520)

  Any suggestions?

  Hi @AylestoneHash,

  I have an idea! After preparing your post, my first instinct is to assume that the problem is somehow related to the driver. Now, I could be wrong, it's happened once or twice before, but I would like to test my theory. We will assign another driver and see if that fixes the problem then.

  Please use the following link to useful instructions to affect other printer drivers in different Versions of Windows.

  If the problem persists, you can also run print HP and the Scan Doctor because it can give us an overview of the issue. Printing HP and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems, including but not limited to:

  • Connectivity:

    USB: Check that the USB connection from your computer to the HP product works properly.

    Network: Verifies that the network connection between your computer and your network is working properly.

  • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

  • Driver: checks the driver missing or corrupt files.

  • Device Manager: check the problems in Device Manager that could prevent printing.

  • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

  • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

  • Port Match: check the port settings for the HP product.

  • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

  • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

  • Print settings: check and adjust the print quality settings.

  • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

  • Scan tests: check the scanning mechanism, drivers, and registry entries.

  Source:try the HP Print and Scan Doctor for Windows

  Click here to download and run the print and Scan Doctor > > www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to identify the key and check mart are in the green circle.

  • If you see only the Green checkmarks (), the tool did not find any problem.

  • If you see green sides (), the utility identified a problem and fix it automatically.

• If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

• If you see a red X (), follow the onscreen instructions to fix the problem.

Thanks, I look forward to hearing back on your part.

I can't wait to hear back on your part.

• Office jet Pro 6230: duplex on mac

  I don't see an option to print duplex from Microsoft Word. I bought this printer recently and I know that I have successfully printed on 2 sides. I don't remember what I was doing before.

  Why I don't see a copy front and back of the Word option?

  Thanks, Jim

  Hi Shlomil,

  Success at last! Thank you very much for your help. It's a bit complicated and I hope that I remember for next time.

  I did not even notice an AirPrint option, but it printed 2 sides of the available option.

  Kind regards

  Jim