OJ6500A more: 6500 a do not print

Similar Questions

• HP 6500 E709a do not print

  HP 6500 E709a will not print after the blackout. Performed all troubleshooting solutions. Notice to the right of the symbol of black ink on the screen is missing. I work with Mac OS X v. 10.6.8. Allowed me to print the e-mail but not Excel or Word doc.

  I decided to buy a new printer, but thanks anyway.

• HP OfficeJet 6500 wireless do not print because there are 2 days, I changed my wireless router

  Original title: print printer print

  My HP OfficeJet 6500 Wireless will not print because 2 days ago, I changed my wireless router. The printer is no longer under warranty and I'm using Windows 7 OS. I have

  Assuming that there is a wireless connection to the printer, the most likely cause of the problem is that the printer is configured to obtain its IP address automatically, and the new router has assigned to the printer an IP address that is different from that which was initially awarded.

  To check if the above is the question:

  Controls on the front panel of the printer allows you to print a Network Setup page:
  From the home screen, press the right arrow, and then select Setup.
  Touch reports, click Network Configuration Page.

  Find the IP address of the printer on the Network Configuration page.

  On your computer, go to devices and printers

  • Right-click on your printer icon, and then select "printer properties".
  • Click the "Ports" tab
  • WITHOUT clicking anywhere in the list of ports other than the right scroll bar, find the line highlighted (the one with the box in the box)
  • Is the 'Port' the same as the IP address of the printer that you noted on the Network Configuration page?
  • Assuming that the port in the printer properties dialog box is not the same as that shown on the Network Configuration page, click the "Configure Port" button and enter the correct IP address in the box "printer name or IP address.
  • OK your way out

  To avoid this problem does not happen, read the User Guide for the your printer and configure the printer to use a static or fixed IP address.  Choose an address that is in the same subnet as the router but outside the range of addresses used by the DHCP server on the router.  You can find this information on the configuration of your router utility.

  For example, most Linksys/Cisco routers use the IP addresses of the form 192.168.1.x and allocate addresses in the range 192.168.1.100 to 192.168.1.150.  In this case, you should take a static IP as 192.168.1.20 (20 is outside the range of 100 to 150).

• More than 6500: black does not print

  I have a 6500 a more. All of a sudden it won't print black. I have cleaned the printhead several times, put in a new cartridge, etc.

  Suggestions?

  Hello @eamoroso ,

  Welcome to the HP forum.

  I understand that your 6500 has more is not printing black. I would like to help.

  Try to go through the steps described in the following document.

  Printer prints a blank Page or doesn't print black or color ink for the HP Officejet 6500 is e-all-in-One Printer Series

  Please let me know if it helps.

• OfficeJet 6500 intermittently does not print half of the last line in the lower doc

  Using an Officejet 6500 E709a connected to Windows 7 64-bit PC via ethernet LAN.  Intermittently, the printer is unable to print a part of the last line of the document.  A 12 point font for example it does not print the bottom half of the letters on the last line of text.  What software (word, excel, PDF, etc.) and it does not matter hwer on the page of the last line falls.  It occurs only on the last page of multipage documents.

  Try that and see if it helps the question:

  1. In the Windows taskbar, click the Windows icon ( ), type control printers in the Search text box and press ENTER. The Printers window opens.

• My HP 6500 E709A will not print in black.

  My HP Officejet 6500 E709A Series does not print in black. I have put in a new cartridge, made all of the recommended tests, even reset when you unplug the unit for 20 seconds then hold # and 3 and plug it in but it didn't work. Help!

  Unfortunately, all do not have to be fixed, because the black print head w as worn, so I had to get a new one. At least they are cheaper now!

• 6500 a does not print. iMac w/OS 10.6.7. Message says full spool area.

  My 6500 has stopped printing my iMac, although it doesn't thin test.  (Test sheet can be requested OK computer, not only on the 6500 has).  Operating system is 10.6.7.  Problem of thought was a low-ink warning, but install the new cartridges did not print back.  HP utility present receipt of the file and (briefly) a message that printing is 98 percent complete.  Then a few moments later she stops, displays a message indicating that the "spool area" is "full".  The printer starts to "lazy" and no indication of the file disappears.  Rotation off (wait) and then on new printer did not correct problem.  Is it possible to clear this area of spool, so that the 6500 has going to print?  Thanks for any advice.

  Well Yes, we will reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• my hp 6500 has does not print with my laptop running Windows 8.1 (big difference)

  I try to print from a computer running Windows 8.1 to my HP 6500 has everything in a printer. It will not print anything except 6 x 4 photos. If you want to print a document on A4, I get the message of size mismatch. I tried on a second PC (with Windows 8.1) and it still does not print.

  Sorry I don't have a service manual for the 6500 has.

  Try to use compressed air to clean the inside of the 6500 a. (just in case it's dust)

• More recent Photosmart 6520, not printing cyan

  Print stuff now that should be primarily blue & green - outgoing blue gray and stuff that has to be green is dark red. Ran: Tools > Print Quality Report - turned out to be just as it should. Tested another print to... same issues with grey/red instead of blue/green. Ran: Tools > cleaning print head - this second "Print quality diagnostic" printed even better than the first test. But same problem persists with the printing of the original file.

  Please help?

  S

  I found some additional info - it is not the printer, this is the files I tried to print in PDF Viewer that I used!

  1. the records were not print correctly from Apple previewed, but printed fine via Adobe Reader.

  2. I was able to print other PDF files in color at Apple Preview, but not this particular batch of files designed (letterhead, envelopes, business cards, etc.).

  Thus, a). There is a problem with the batch of files, in conjunction with b). using Apple Preview to view & print these files. Strangest thing I've ever seen. :-/  But at least it isn't a problem with my printer. Thanks for the follow-up, Ciara.

• My Printer series most recent HP 6500 Wireless does not print not new laptop Dell Inspiron

  Why my 1 yr old printer wireless HP 6500 series printing my old new Dell Inspiron laptop 1 mos?

  Hi JedsterNL,

  1. what happens when you try to print? You receive messages or error codes?

  2 have you tried to update the printer drivers?

  Method 1:

  You can run the troubleshooter printer and check if it can solve the problem.

  Open the printer Troubleshooter

  Method 2:

  You can also try to update the latest version of the printer from the HP website drivers and check if it helps.

  Software & Driver Downloads - printer all-in-one HP Officejet 6500 - E709a

  For more information, you can also consult the following article:
  Updated a hardware driver that is not working properly

  Hope this information is useful.

• HP Officejet 6500 a is not printing

  I get an error message on my phone that says that my printer is not enabled when it is.  I have plugged and unplugged the printer, turned the printer market, restarted the computer, check the cords and fact the online troubleshooting.  What's next?

  Zoedog7

  Welcome to the Community Forum of HP.

  Try / review

  =======================================================

  Restart all

  • You can try to reboot the router with the computer and the printer; This can help if the problem is simple disconnection between the different parts of the network.

  =======================================================

  Hard reset

  • If you believe that the issue is in the notebook, which is unlikely, but possible, you could try a Hard Reset on the phone.  This type of reset is not, does NOT repeat, erase your data or your software - it's just a way to tell the operating system to read fresh from the disk and get some nice, clean, new instructions to the next startup:
  • Create a Restore Point: create a restore - Win7 Point OR create a restore point Win8

  If you use a laptop:

  • Close all your programs and shut down your computer
  • Unplug everything (little unifying for the keyboard / mouse external can stay)
  • Perform the Hard Reset for your model of laptop
  • Start the computer and connect

  ELSE, if you use a desktop computer:

  • Close all your programs and shut down your computer
  • Disconnect devices USB, speakers, other drives useless
  • Unplug the computer thirty seconds
  • Connect the power supply (plug in)
  • Reconnect the devices
  • Start / start the computer and log in

  Reminder: Hard Reset is just a device to reset.  The procedure do not destroy your files, or it destroys your Windows installation somehow.  It's just "clears the cobwebs".  Depending on the cause of the problem, this kind of "reset" can fix a variety of computer problems.

  ======================================================

  Install the full features software

  • The next step could be to try to install (reinstalling) the printing software full feature software on your computer to see if your computer can re-establish the connection with your elusive printer.

  What follows applies mainly for computers running recent versions of Windows operating system.

  General instructions to install the printer software

  Reminder:

  1. In most cases, the Solution Center has been replaced by the wizard of the printer.
  2. Shortcuts to the printer wizard will be installed on your desktop during the last part of the installation.

  Windows operating system:

  • Create a Restore Point: create a restore - Win7 Point OR create a restore point Win8
  • Open drivers HP & downloads
  • Enter your printer model information
  • Select your printer in the list of the 'results '.

  OR

  • Open HP Officejet 6500 has e-all-in-One Printer series - E710
  • Select your printer in the list of the 'results '.
  • Enter your operating system the menu drop-down
  • Click NEXT and scroll down
  • Find the driver - product Installation software category
  • Select the driver of base, e-print, or full software functionality
  • Save the package *.exe Setup on your computer

  The files will probably save in the "folder"downloads. "

  Don't forget to search for updates as necessary for your installation. If available, you can download print and scan doctor and / or other programs of category - utilities.

  • If you have control of "Admin", you can highlight the package and "double-click" to install it, otherwise just right-click, select run as administrator and install.

  NOTES:

  • Look at the bottom half of the main Web page for your printer for helpful videos help with the installation of the printer software!
  • Scroll through the list of videos back until you find the video that best fits your situation.
  • If you use a USB connection: download and install the driver software before connecting a USB cable.
  • Ethernet: connect the printer to the network and (optional) assign the printer IP address to the router. Once the printer is connected to the network, make sure that the printer is on, and then install the printer software.
  • Once the initial installation is complete and functional, check / install category - updated

  There is valuable information on the support site, including sections for manuals, Troubleshooting > How-to's, Troubleshooting > solving a problem, more alerts and notifications for your printer.  Be sure to take a comprehensive look at what's available.  To bookmark the page.

  ======================================================

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Although I strive to reflect best practices of HP, I do not work for HP.

  Click on accept as Solution when the answer is a good solution or workaround!

• OfficeJet 6500 Wireless will not print black ink. Replaced by the new basket.

  Wagon seems a little different from my previous. I have windows 7 64 bit operating system.

  When you have changed the cartridge, the printer tried to automatic alignment?  How it went? (Success or failure)

  So, you did a printhead cleaning (3 levels is preferable in this case)?

  * Press the key on the front panel of the printer

  * Press the arrow on the right for tools, then press Ok

  * Press the arrow on the right for the clean Printhead and press Ok

  I also remove the black cartridge in the printer and try to clean the electric contacts with a clean, lint cloth and water.  Also wipe the contacts in the printer (make sure it is turned off during this operation).

  There is also a document with the steps to solve a problem of printing such as this one.  The document can be accessed here.

  If you get to step on replacing the printhead, then you have two options.  This being a wireless Officejet 6500 (E709n) it is probably out of warranty.

  (1) we can try the workaround provided by Bob_Headrick in the thread found here.

  (2) you can buy the print head since with CN643a part number HP parts store.  The print head sells currently for about US $70.

  (3) you can buy a new printer because it would be not much more than the printhead and would come with a full factory warranty.

  I hope this helps.

• HP 6500 E709A does not print black

  My model HP Officejet 6500 E709A old two year has stopped printing black ink. I figured it was because of the black cartridge down on ink because the print is very low. So I put in a new jumbo size 920 black inks. Now, I get nothing. I tried a lot of stuff mentioned on these long threads from 15 to 46 page on the site of HP aid without result. These tips included restart while holding the 3 and the sign # etc. (this worked last year and corrected the problem).

  I took all the cartridges and inspected the transport. The grid in stainless steel under the black ink is spotless and shiny silver, so I think no obstruction is a problem. Others have a bit of their visible residual color so it leads me to believe that no ink draw us out of the black cartridge.

  I deleted all my HP programs and reloaded them. The problem persists. Why put in a new cartridge would kill the machine?

  One thing I am is sucking the remaining ink in the other colors making alignments and all that. Add to that, a colossal waste of time.

  Oh yes, the plastic strip is off the air intake.

  Any helpful ideas?

  In all honesty to HP and help others unnecessarily, which would have to buy another printer, I should disclose that I found a viable solution to this maddening problem of black ink print do not. In the last month, I left this problem while I checked around a new printer. I found that practically all non commercial printers (homeowner grade) have some deficit or question, then I tried one last time to fix this and succeeded.

  My first attempt in rinsing / soaking/rinsing of the print head for 15 minutes in a solution of water and wipe carefully failed.

  Others have soaked the print head in a solution of lukewarm water with a bit of added dishwasher detergent. I tried this by placing the print head in a bowl of soup with a little more than an inch of hot water and change the water several times over a period of 24 hours. I then rinsed/soaked in hot water plain to ensure that no soapy residue remained the printhead.

  Later, I took, shook off the remaining water and then dried everything that I could with a paper towel, especially the rear electrical contact area.  However, I do not dry a period extended time and voluntarily left the heads of ink still wet/wet internally (gray color ink screens). This plan did not work, I was going to throw the printer anyway so there was little to lose if it has triggered and shorted.

  But it didn't worked and continued to do so for several days. If this success was due to a prolonged soaking, SOAP, or return the printhead running before tiny remaining bits of black ink can dry and redurcir is uncertain. I think that it is a viable solution for those with no possibility of better.

• I have a HP printer 6500 that do not print. It seems that the rollers do not work.

  Roll the rollers, but the book does not advance in the printer.

  Troubleshooting page here can help.  If this does not resolve the problem that, please indicate what model of printer you have, there are a number of models Officejet 6500 with a few differences.

• Printer HP 6500 E709n will not print full color

  My printer HP 6500 E709n shows all full color cartridges, but is all green print only. I'll try to clean/wipe the head of the cartridge, but I don't see a cleanup on this printer option. And if this isn't the problem, the screen showing all cartridges in full would be incorrect?

  Hi Jan,

  Thank you for visiting Microsoft Community.

  From your description, I understand that the printer only prints in green.

  I suggest you contact HP support for assistance on this issue:

  http://welcome.HP.com/country/us/en/support.html

  It will be useful.