OLIVIER 11.1.1.7.1 problem installing Configuration Manager.

Similar Questions

• Not enough memory RAM for EDU-ICM-1301 - VMware - SAMPLE Training Services - on request in the system class: vSphere install, configure, manage course 5.5

  Hello

  I'm looking for the laboratory "EDU-ICM-1301 - VMware education Services - SAMPLE - in class on request: vSphere install, configure, manage course 5.5" but trying to follow the instructions

  LabFiles\vCenter GA Installer

  3. Double-click autorun.exe , click run.
  4. If the security warning dialog boxes appear, click run to continue.

  the installation does not work with because the memory is not enough.

  Have you ever tried this workshop?

  You have a solution for this problem?

  Thank you

  Hello

  Yes we have seen several times.

  The simple solution is to install ONLY the Client vSphere and not all vCenter Server.  Specified in the manual, but it is up to the user that installation of the client is the option left on the halfway point in the Setup user interface.

  Thank you.

• Fact the VMware vSphere: install, configure, manage [4.0] class eligible for VCP5 prereq?

  Hi all

  Doing some research, but has not been able to confirm.  Also left message with our VMware training rep areas last week, but never heard back, so thought I would try here.

  In 2011, I finished the VMware vSphere: install, configure, manage [4.0] courses.  I never did get my VCP4, but now want to try for my VCP5.  This class would qualify as a prereq so that I can just take the VMware vSphere: What's New (version 5.0) courses?  The web site called specifically need to VMware vSphere: install, configure, manage [V4.1] class so I think not, but I wanted to check.  I would take the shorter, which is the new class rather than a class 4 or 5 days on vSphere 5.0 so I can.

  Can anyone confirm?

  Thank you

  Bob

  No problem, this path has always been available for VCP5.

  And Bob, the counties of 4.0 class, as well as class 4.1 - is only the class 4.1, which is referred to as the class 4.0 retired some time ago and has been removed from the page VCP5 when he retired.

• VMware vSphere: install, configure, manage [V5.1] correct review and practice test

  Dear all,

  Here, I'm a bit confused so I need help to clarify which exam I have to take and what is the matter with this review. I took the course VMware vSphere: install, configure, manage [V5.1] and when I tried to register for the exam, he gave me the review "VCPD510: VMware Certified Professional-Desktop ' and when I tried to find some documents to study, I found two different materials, which relates to the VCP5-DT, which is all about VMware View: install, configure, manage [V5.x] and the other which is VCP - 510. While we should I study.

  Help, please.

  Hi mariusme,

  The review, you have to take is VCP5-VTC. VCPD510 is for desktop, which is entirely different. Please go to the vmware certification page and select VCP5-DCV(vmware certified professional in datacenter virtualization) and you will find the action plan. You can follow it, and since you've followed the required courses, you will be eligible to take the certification. And also sign up for VTC - VCP on Vmware Portal before you book review on PearsonVUE.

• I'm trying to fix CC problem installing application manager, but cannot install after uninstalling

  I had a problem of Update Manager application CC, so completely uninstalled.  Now when I go to the Download Center to download the application, it tells me that I'm running a system that is no longer supported.  System requirements show support for Mac OS X v10.7 and v10.8 - I am running v10.7.  Clues as to why it does not work?  Thank you!

  Hi runningkatze,

  Please try to download from the direct link: http://prodesigntools.com/adobe-cc-direct-download-links.html .

  Please follow the instructions very important before you download...

  Kind regards

  Romit Sinha

• VMware vSphere: install, configure, manage [V4] still applies for VCP 4.1

  Hello everyone

  I took the VMware vSphere: install, configure, and manage 09/09...will the course of the class

  to apply for the exam for VCP certification?  If so how much time I have left with remaining

  eligible with this class to take the test?

  Thanks in advance...

  Your course was based on 4.0 at the time, the current VCP4 exam is not 4.1 specific as such, if your course still qualifies you for certification. VCP4 is specifically "VCP on vSphere 4", not 4.0 or 4.1.

  Get the review plan later, the study of literature 4.1 (in the case where VMware is updated the review of some elements specific to 4.1) and use the convenient software either 4.0 or 4.1.

  Scott.

  -

• different between "VMware vSphere: install, configure, manage [V4]" and "VMware vSphere: Fast Track [V4]" "

  can someone help me understand different between "VMware vSphere: install, configure, and manage "and"VMware vSphere: Fast Track ", first becuse is about $3,000 and another is about $5000. "

  Thank you

  can someone give me some information about the rules of absente, homework and laboratories, in these classes online.

  You must participate in daily.

  You need a good Internet connection and a fixed phone or a headeset.

  Online courses are generally in central time... but in some cases may be different.

  also should I take a test on these classes?

  NO.

  just be present on these days of class?

  Yes

  I mean those class just for learning or at the end of these classes, I have to pass an additional examination for them?

  The VCP410 exam to be held in a centre VIEW (www.vue.com)... for the use of recording the same e-mail that your use of the course.

  André

• Problem installing configuration Multserver: URGENT

  Try to upgrade to CF 9 of 8,01, unstall of 8.01 hung up on records.

  Now, I can't reinstall as the option is greyed out message:

  "This option is disabled because JRun 4 has been detected on this computer."

  I deleted the directory JRun, all instances of the CF, I could of any key
  in Regedit.

  Does anyone know what I need to remove to allow me to reinstall it?

  Thank you

  Gary

  Thanks guys, solved the problem is the registry key that you want to remove

  "Uninstall Adobe ColdFusion 8 (multiserver). I had previously deleted all instances by using the command
  the line: sc delete [instance_name].

  Found the registry key by using the search in the registry with the help of Adobe, but I've never made account fields abobe how it would be.

  Should have sought just ColdFusion that was evident.

  Thanks again

  Gary

• Crash course or install, configure and manage?

  I just spent the VCA - VTC

  Then the top is the VCP course but I'm torn between one to take, through experience I was using VMware for about 2 years now. I have bunches vCenter configuration and administered a reasonably small environment on the grand scheme of things and put things in common ground... I'll take the VCP 6 dishes, so be it, but for comparison I've been watching the VMware 5.5 Fast track vs. ICM here: VMware vSphere training comparison 5.X

  I wouldn't go as far as say I am an experienced administrator, but I wouldn't say that I am a beginner. Obviously the fast lane contains much more information if it would suite me best, but what is your point of view on the 2 different courses?

  The first courses install configure manage short this week, although GA was only last Thursday! These are run on the laboratories using a beta version of the software, but that won't be for a few weeks.

  Fast Track for vSphere 6 is not yet available, but you should not wait for a long time (in weeks rather than months)

• Suggested knowledge to install, configure, and manage class V4 exam VCP

  Hello

  I'm relatively new to the it field, just graduated from College, and I really want to work to become a VCP.

  I'm looking to take the class install, configure, manage V4 some time next month, and I was wondering what do I need in terms of knowledge required to take full advantage of this course.

  Thank you for your help and your insight,

  Bao - Tran

  vSphere documentation is here: http://www.vmware.com/support/pubs/vs_pages/vsp_pubs_esx40_u1_vc40_u1.html

  Evaluation software is here: https://www.vmware.com/tryvmware/?p=vsphere

  And you can be aware of the wider infrastructure (SAN/NAS/network) the best

  Scott.

  -

• Problem installing device a1530n

  Running Win XP Media Center Edition.  Had minor graphical problems at the top of the IE bar periodically endangered.  Decided to remove the Intel (r) 82945G Express Chipset adapter in Device Manager and then do a scan for new hardware.  And now I get the message of the new hardware detected that says.

  Cannot install this hardware

  There was a problem installing this hardware:

  Intel (r) 82945G Express Chipset Family

  An error occurred during the installation of the device

  Access is denied.

  I am connected to the computer as an administrator.  I tried to install this even in safe mode and get the same error above.  Any clues on what do I do?  The computer runs only in VGA mode.

  Thanks in advance.

  Link to screen shot of the error message.

• Satellite P300-133 - problem installing Win Xp

  Hello

  I have a problem installing win xp to Satellite p300-133.
  To resolve this problem, I have tried the solutions:
  switch to ahci mode in bios and incorporating storage drivers compatibility intel to the installation cd xp with nlite, but none of them solved the problem.

  Laptop computer starts from the cd of xp and xp installation says "program Setup inspects your hardware configuration" and then a blank black screen comes.
  After that, the installation does nothing and waits indefinitely.

  Any ideas on this problem? Thank you.

  Hello

  > switch to compatibility ahci mode in the bios and the integration of the storage drivers Intel to xp with nlite installation cd, but none of them solved the problem.

  The two methods are good!
  You can install the Win XP without drivers Intel Storage Manager (SATA drivers) but in this case the SATA mode must be on compatible mode.
  It works for sure!

  The second method is the installation of the SATA drivers with nLite (drivers can be integrated into the new drive Win XP).

  I put t understand why this doesn t work on your laptop. I think it's a problem with your Win XP drive. Contains this Win XP SP2 or SP3?
  If this isn't the case, then you should use nLite to include min the Win XP SP2.

  Check it!

• P1102w: Problem installing P1102w, PC, printer is on does not recognize, Windows 8

  I have problems to install the printer.  Loads of software and extracted, then when I go to wireless network connection, it says he's expecting me turn on the printer when the printer is turned on and connected to the USB port.  I even changed USB ports.  It is still not let me install.

  Hi @gawright59,

  I see that you have problems of configuration of the printer on the wireless network, the printer is not recognized as the USB connection during installation. I will definitely do my best to help you.

  This can occur when the printer is already recognized as the USB connection and windows does not yet detect.

  The best way to solve this problem is to unplug the USB cable, run uninstall and reinstall the printer software again. Do not connect the USB cable until you are prompted during the installation. Select the wireless installation. (do not install the printer as a USB connection and then run the Wireless Setup Wizard)

  The other way to resolve this issue when you receive the message, is to leave the USB cable connected, remove the printer in the devices window and printers and Device Manager.

  Here are the steps for access to the devices and printers and Device Manager.

  From the desktop, hold down the Windows and X. This will bring up a list, open Control Panel and then devices and printers. Right-click on the printer and on the left, click on uninstall.

  To access the Device Manager:

  Press the windows key and press X on the keyboard at the same time in the office.

  Then click on Device Manager in the list.

  Verify that connections in Device Manager for the entries of the printer, under Bus USB controllers look for a USB print media or anything with an exclamation yellow, storage device or an unknown device. Right click and uninstall the device.

  Then reconnect the USB cable and it must be detectable again.

  Feel free to click on the "Thumbs up" button below if it helps.

  If there is anything else I can help you, let me know. Thank you.

• Problem installing PCI-6220

  Hello

  I have problems installing a PCI-6220. The card has been installed a couple of years on a PC and rarely used. I withdrew from the it and connected to a new PC (Intel core i3 2.93 GHz, Windows7). After installing the card on the new PC in a first time, I could read the name of PCI6220 under 'Devices and interfaces' (in the program MAX) but I´d not been able to define it as a device. So I tried to remove the card and plug it in again and now the situation is even worse, I only see an "unidentified PXI system" in the program of MAX.

  Any idea what bad and what can do to make sure that the card does not work properly? As a reference, I need to connect to a CA-1000 enclosure housing a CB-68LPR device.

  Thanks in advance,

  G.

  Install the latest (9.3) DAQmx-drivers for your PCI, which could help.

  http://Joule.NI.com/nidu/CDs/view/p/ID/2337

• Problem installing LAN USB adapter in a new copy of windows 2000

  After having reformatted my hard drive and install a new copy of window 2000, I'm having a problem installing device drivers.  When I enter the correct inf file path, it reports that this window has not found a driver for the device.  Whithout the possibility to connect to internet, I have exhausted all my options and still need to install several other drivers with the same problem.  help help help help

  Everything you try to use (you do not give the brand / model of the LAN USB adapter) made drivers for Windows 2000?