OMG! iPhone blocked during reset.

Similar Questions

• every time I erase content and settings on my iphone 6 after reset at the start of my phone and after crossing the screen as Hello > select language > Connect wifi > my iphone doesnot ask me activation lock even if my unit is also found on

  every time I erase content and settings on my iphone 6 after reset at the start of my phone and after crossing the screen as Hello > select language > wifi connection > my iphone doesnot ask me lock activation that says that your iphone is connected with the old apple ID, please enter the id and password

  I always reset on find my optional equipment please tell me how to activate locking activation so that whenever I have factory reset my phone with finding my camera so my phone always ask an old apple and password

  I do not understand your question, but let me go with what I believe. Looks like you entered in iCloud and erased all the content and settings on the iPhone, and once you go by assigning back up again, you do not see something that you expect to see, for example, a request for an Apple ID. When you go through the installation process to select the language, etc., it must, at some point, ask you to identify yourself with your Apple ID. are you not see this?

  It would be better if you try to describe exactly what you do again. Also, without the help of any sign of punctuation, it is difficult to track everything you ask. Try providing the steps of what you do, and then what you see when you get to the point that you believe that something is going wrong. You mention both an old and new Apple ID, which is rather confusing.

• Satellite L630-15U - block during the use of the

  I have a L630-15U Windows 7 Professional 64 bit, when I use in battery mode after a few minutes it crashes often. Everything has been frozen, I need to turn it off.

  Hey Buddy,

  What do you think average either it blocks during use?
  This means after a few minutes when you use your laptop with battery only if freezes and has to be restarted, no?

  Well, it's not easy to say which is the reason. You use the original Toshiba battery? Otherwise I recommend the spare parts and test with an original Toshiba battery.

  Also, you could try a BIOS update. Charge the battery up to full East, leave AC connected adapter and start updating the BIOS as an administrator. Close all programs that are running before do you (also antivirus).

  Check this box!

• Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Hello

  Our environment is Essbase 11.1.2.2 and work on Essbase EAS and components of Shared Services. One of our user tried to execute the Script of Cal of a single application and in the face of this error.

  Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  
  

  I did a few Google and found that we need to add something in the Essbase.cfg file as below.

  Dynamics Processor Calc 1012704 fails to more blocks ESM number for the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Possible problems

  Analytical services cannot lock enough blocks to perform the calculation.

  Possible solutions

  Increase the number of blocks of analytical Services can allocate to a calculation:

  1. Set the maximum number of blocks of analytical Services can allocate at least 500.
     1. If you are not a $ARBORPATH/bin/essbase.cfg on the file server computer, create one using a text editor.
     2. In the essbase.cfg folder on the server computer, set CALCLOCKBLOCKHIGH to 500.
     3. Stopping and restarting Analysis server.
  2. Add the command SET LOCKBLOCK STUDENT at the beginning of the calculation script.
  3. Set the cache of data large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH parameter.
     • Determine the size of the block.
     • The size of wrestled data.

  In fact in our queue (essbase.cfg) Config Server we have given below added.

  CalcLockBlockHigh 2000

  CalcLockBlockDefault 200

  CalcLockBlocklow 50

  
  

  So my question is if edit us the file Essbase.cfg and add the above settings restart services will work?  and if yes, why should change us the configuration file of server if the problem concerns a Cal Script application. Please guide me how to do this.

  
  

  Kind regards

  Naveen
  

  Yes it must *.

  Make sure that you have "migrated settings cache of database as well. If the cache is too small, you will have similar problems.

• IPhone locked after reset options.

  I used my Iphone 16 GB 5, for one year. LETER a week I decided to present it to my mother and I reset my default settings. (I was the first user of my camera, it was purchased in the shop). IPhone write - me in your Apple ID to restore (after reset setting, first start). I fill it up but my iphone told me that this ID cannot be used to restore my iphone. And can not pass the system restore, is unable to make the Itunes backup. Someonew can help me? =(

  Hi Vlad2626,

  If your identifier Apple has been locked, take a look at the resource below to solve security problems.

  If your identifier Apple is locked

  If you or someone else enters your password, security or other wrong account information questions too many times, your Apple ID automatically locks to protect your security and you cannot connect to Apple services. You can unlock your Apple ID, after verifying your identity.

  If your identifier Apple is blocked for security reasons, you may experience one of these alerts:

  • "This identifier Apple has been disabled for security reasons".
  • "You cannot sign in because your account has been disabled for security reasons."
  • "This identifier Apple has been locked for security reasons.

  When you see one of these alerts, you can go to iforgot.apple.com to unlock your account with your existing password or reset your password. After several unsuccessful attempts to unlock your account, your identifier Apple will remain locked and you can try again the next day.

  If you use the two-step verification, you must use your recovery key and trust device. And if you use two-factor authentication, you need a trusted device or a reliable phone number to unlock your Apple ID.

  If you see a message which differs by alerts above and you can't reset your password, contact us for assistance.

  To learn more

  After changing your password, you may need to update in your iCloud settings and in all Apple services log in with your Apple ID. Learn more about Apple ID and where you can use it.

  Last modified: 10 December 2015

  Take care

• iPhone instead of resetting screenshots

  Hi all, I have an iPhone 7 that works fine apart from the fact that I try to do a soft reset (hold power + "home" button) it does nothing except when I release the buttons it takes a screenshot.

  Apart from that I have no problem using two buttons and the phone works very well, I can't do a reset (which I think I may need to do iron on some software quirks)-I tried holding it for as long as possible, but after a minute, the screen automatically goes mode sleep If I released before then it's just takes a screenshot.

  Have also tried pressing both buttons in various orders, but same result no matter what.

  Any ideas?

  The iPhone 7 uses the button On / Off and Volume to perform a reset button.

• After updating, my iphone blocked from Iphoto, itunes

  After updating my Iphone 5, it can more interact with Iphoto or Itunes on my laptop (2008 ongoing OSx 10.6.8). Macbook When I open Itunes, the error message reads "Itunes could not connect to the Iphone because an invalid response received from this device". When I run Iphoto, the error that says "Photos cannot be viewed or imported because the Iphone is blocked with an access code...". "but the password is disabled. When I plug the Iphone into the USB I am asked to trust/mistrust the phone, I choose the trust.

  Hello CA 22!

  Thank you for using communities Support from Apple! We see it in your post that you are having problems using your iPhone 5 that has been upgraded to iOS 10 with your Mac running Mac OS X 10.6.8.

  To use your iPhone 5 with iOS 10 with your Mac, you must first Download iTunes 12.5.1 which requires Mac OS X 10.9.5 Mavericks or later to install.

  Please let us know if that answers your question.

  Sincere greetings.

• iPhone disconnected during the software update

  My iPhone 5 has been connected to iTunes on my PC and I started a software update.  The phone disconnected during the update due to a bad cable.  Now my phone is locked to the screen update showing the apple logo.   I can't turn off it normally to reboot and iTunes does not recognize the phone when I plug it back on my PC.   Any ideas?

  Use the recovery mode as described here.  You may try to go into recovery mode more than once to succeed.

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• My Iphone was stolen. How can I find my iphone if someone reset my iphone?

  The first time that my phone was stolen was around the year 2014. I got my phone after that I went to the teacher and Director in this regard. The second time is when I put my phone to my friend because we had ipads at school for schoolwork, but she did not have an iPad, so I let him hold my phone until the end of the school. After school, waiting for her, but she was not outside. The next day, I asked where was my phone?, but she said she's going to give back my phone tomorrow because she has left it home. After this time, only it never gave my phone back to me.  I tried to find my iPhone app, but no response. I think she reset it. How can I locate my phone? Please help me, I want my phone back.

  Follow the instructions here > If your iPhone, iPad or iPod touch is lost or stolen - Apple Support

• iPhone: how to reset Cache Mail?

  I recently browsed and cleaned my gmail account; delete all emails from before 2014. When I open the mail application on my iPhone, I noticed that mail on my phone is a scattered set of dates throughout the different years. I scrolled upward then towards the bottom of the list to try to reload some messages without result. It seems to be a problem with how the iPhone downloads IMAP folders, but unfortunately I can't find a way to clear and reload all my mail.

  I tried to get into the settings and disable my account and reset the phone can turn mail back.

  I tried to delete my e-mail account, reset the phone, then connection back.

  I ran an update software iOS which had stood in line just to see if she could clean up after itself.

  Before each of the foregoing, I checked in use/storage and my "Mail and attachments" was 54MB and was still 54MB after I have supposedly deleted my mail.

  Is there somehow to actually reset the mail files and force them to download so that I can actually see my emails?

  (In addition, Apple, please allow a kind of file or memory management in the next iOS)

  Thank you!!

  iPhone 5 c

  iOS 9.3.2

  Troubleshooting of user is:

  1. reboot, IE power off / on,.

  2 reset http://support.apple.com/kb/HT1430,

  3. restore the backup, restore as a new device. http://support.Apple.com/kb/HT1414

• Find my iPhone-blocked number

  I lost my iPhone last night and I tried to use find my phone feature but unfortunately my phone is off.

  I called Vodafone to block my number to prevent anyone who calls etc. This average feature the 'find my iPhone' does not work?

  Thank you

  Perhaps. If the phone is unable to access the cellular data network, it would show only upward if connected to Wi - Fi. Ask Vodafone if the block also prevented the use of data.

• IPhone lost during Transport

  During transport, the iPhone, that I bought has been lost. The person that I bought and I want to know the current place of residence (or at least the last known location), but it is impossible for us only. We have the imei, serial number and proof of purchase of the phone.

  I would also like to know the e-mail address to which the phone is currently assigned to, so this can help us find the phone, but I think that it is also not possible.

  Can anyone who has any ideas please tell me something that might help.

  Thank you.

  No one here nor Apple itself cannot help you with this. If the phone has find my iPhone activated, is turned on and connected to a cellular data or wifi network, it can be traced in the iCloud account that this be enabled find my iPhone. Otherwise, there is no way to remotely track.

  You should report the loss with the sender since they are responsible for packages that are lost in their system.

• Using an iPhone 6s during charging damage the battery?

  use the 6s during loading iphone damage the battery?

  N °

• my account has been temporarily blocked during an investigation of unauthorized access and now I can't connect to or re: access my account

  I created this account so that I can post this question on my real account associated with xbox live gamertag "kookamango" that is blocked.

  So far, I've dealt with xbox live support, which all have confirmed that this problem is not solvable on their end. My last support Xbox Live call reference number is 1160762648
  My account has unauthorized access and fraudulent charges have been made. The situation has been studied, and my money was refunded to me. The number of service request for the investigation of fraud was 1160762648. My account has been blocked in the investigation and is still blocked even if the investigation is completed and I was sent my email account recovery. Despite the reset my password several times and multiple recovery emails, I couldn't again access to my account, because he always goes to a window saying: "your account has been temporarily blocked."
  Please unblock my account windowslive

  Hello

  By facing the problem with Windows live account, it would be better to post the same question in the Windows Live Solution Center for assistance.

  Windows Live Solution Center: http://windowslivehelp.com/product.aspx?productid=10

  For more information, see the following articles:

  http://support.Xbox.com/en-us/Xbox-Live/how-to/Xbox-Live-account-management/home

  http://support.Xbox.com/en-us/Xbox-Live/how-to/Xbox-Live-account-management/manage-Live-ID

  Hope the information is useful.

• WU is blocked during installation of updates - but does not freeze

  Hello

  I recently installed Windows 7 Professional on my new PC. It worked well; After that, I installed mainboard and video drivers and then some games.

  Then I noticed that I was not activated Windows Update during installation, so I started the update manually. Download worked, but the installer is stuck to the update 10/59. I then tried to cancel the update (the "Cancel" button was clickable, then the program do not freeze) but nothing happened. So I rebooted the computer...

  I tried to update again, but WU is now stuck at 8/59. I don't know what to do; There is no error message or anything. The only way to cancel the update is by restarting the PC.

  FYI: I waited like 2 or 3 hours, but WU did not progress.

  Thank you very much for the help!

  derKeeper

  Please go here, download and Save the Fixit on this page. Ignore the advanced system like the Fixit applies to Windows 7
  How to reset the Windows Update components

  Next, configure the boot system to eliminate interference of software 3rd party-
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  NOTE:  Start-up mode minimum state all the 3rd party firewalls will be disabled. Make sure that the native firewall of Windows 7 is now on by clicking on the start ORB in the field type search programs and files in the firewall .
  Under Control Panel , click on the link to check the status of the firewall .
  Alternatively, simply unplug the system from the internet at the moment.

  Run MicrosoftFixit50202.msi and wait until it has finished running, then Cancel the Clean boot steps and restart the system.
  If you are disconnected from the internet, reconnect the system now.

  When the updates that have not installed are available again, suggests that install you them in groups not exceeding 10. Yes, it will take longer than installing them at the same time, but if a problem is caused by the updates you can identify that one is causing it by uninstalling the one at a time.

  Expert MowGreen Windows IT Pro - consumer safety