on resetting the device

Similar Questions

• BlackBerry smartphones IS INSTALLING IN BB PROTECT PASSWORD RESET RESET THE DEVICE PASSWORD

  1st post ever.

  BB TORCH 9800 IS RUNNING ON T-MOBILE UK NETWORK PIN PROTECTED

  I started with the BB BOLD in 2009 and moved to BB TORCH 2011 when I had an option of upgrading, so I'm pretty familiar with BB.

  My device is protected by BB and there's the option of password reset on the leg for the identification of BB. What I'm not clear all is if this resets the password to access BB Protect or it can reset the password for the device. I'm on my attempt at entry 9 password, and here's how I got here.

  Summer using the phone as normal through today. I have the protect of spindle of 10 minutes, i.e. whenever the phone is idle, he hangs himself. PIN protection also need to install the software etc, so I must have unlocked the phone at least 12 times or more today.

  As usual, I've unlocked the phone 2 hours ago to send and receive BBM PINES of a couple of friends who have stopped. The only thing that struck me is that one of them used a BB Pearl and the BBM PIN is all non-alphanumeric numbers. After they were gone, thought I'd check on my emails and tried to unlock the phone as usual, and he kept on the return "Incorrect password." I couldn't believe it that's a pin Digital and thought it was a mistake and continued.

  By my 7th attempt, put the sim in a spare handset and called my operator T-Mobile, they said there was nothing they could do, I had to enter in contact with the RIM. Put the sim card in my BB Torch and gave him another chance (at that time it asks you to type in "blackberry" and your password in clear text)

  Fortunately, I had BB protect enabled, I signed the and saved my camera.

  Under the my device tab, you can change the password for the device. T o do you need to enter the existing password (known), enter a new password and then click on the locking device. Done everything that he went and came back to say this device has failed.

  Tried to unlock the unit 9th attempt.

  What are my options?

  robsonjo wrote:

  My device is protected by BB and there's the option of password reset on the leg for the identification of BB. What I'm not clear all is if this resets the password to access BB Protect or it can reset the password for the device. I'm on my attempt at entry 9 password, and here's how I got here.

  The BlackBerryID reset password affects ONLY the password of the BlackBerryID... NO password security of the device itself. Two completely different things.

  robsonjo wrote:

  As usual, I've unlocked the phone 2 hours ago to send and receive BBM PINES of a couple of friends who have stopped. The only thing that struck me is that one of them used a BB Pearl and the BBM PIN is all non-alphanumeric numbers. After they were gone, thought I'd check on my emails and tried to unlock the phone as usual, and he kept on the return "Incorrect password." I couldn't believe it that's a pin Digital and thought it was a mistake and continued.

  It's weird, but not impossible. I've seen a lot of BlackBerry wants a digital-only PIN. Not much.

  It has nothing to do with you the problem.

  I guess it's that you have entered your only security digital password wrong... only not by pressing the ALT key to make the number.

  Often users with more than one digit in their password will only press the ALT key to the first digit and not those who follow, so for example, if your password "1234", you could put pressure on 'Alt 1234 "on the device, making the real password to be"1st".

  Who is? It sounds familiar to your use?

  In order to verify the manner in which you enter your password on the device... do you think that you enter several numbers, but in fact are not?

• reset the error 50002-6533

  Hello

  I use a card PCI-DIO-32HS (NI 6533). An error occurs while writing data to the card, after which I can't reset the map using the tools DAQmx or (reset devic) MAX (DAQmx). I always get "error-50002 occurred to resetting the device. A self-test on the device works. The only way to use the card is to restart the computer, which is quite irritating when you search the bug. Is there another way to reset the map without having to restart the computer.

  Add. Info:

  Windows XP SP 3, LabView 8.0

  See you soon.

  Hi Bernard,.

  I know that you can force windows to delete and detect a usb device, and I wonder if you can do the same with a PCI card.

  http://digital.NI.com/public.nsf/allkb/1D120A90884C25AF862573A700602459?OpenDocument

  I wonder if this is useful. It certainly looks like the way you code. I heard sometimes use the reset device.vi twice in LabVIEW can help, but I've never tried it personally.

  I hope that you manage to tackle the issue of coding you have!

• What happens if the previous owner of ipad forgotten their password and they are not original owner so that they do not have. their system crashed and they reset their device. so they just lost $ 300? It is NOT stolen or lost.

  What happens if the previous owner of ipad forgotten their password and they are not original owner so that they do not have. their system crashed and they reset their device. so they just lost $ 300? It is NOT stolen or lost.

  It requires the Apple ID and password from the previous owner. If you don't have it and can't get it, then the device is useless to you. Return it for a refund if you can.

  Find my iPhone Activation Lock

  Check in the future first before you buy second hand: How to check for Activation lock before buying a second hand iPhone.

  Find my iPhone Activation Lock

  Find my iPhone Activation Lock - remove a device from the account of the previous owner

• BlackBerry Smartphones is App Error: 603 reset the Blackberry Torch device

  I get App error: 603 reset the blackberry torch. And not able to get others on the screen. I tried to reload the OS, but in Office Manager, display of 'Connection', but not able to connect the device correctly. So update and all other options in the Desktop Manager are disabled. How can I reload OS for torch 9800 without Desktop Manager.

  Help, please.

  Thanks in advance.

  Please use the following steps to reload your software:

  Download an application on your computer called BBSAK (BlackBerry Swiss Army Knife). You use it to wipe the operating system of your device. You can get it here: www.bbsak.org

  Download the latest OS for your device, you can get here. https://swdownloads.BlackBerry.com/downloads/entry.do?code=9461CCE28EBE3E76FB4B931C35A169B0

  Connect your device to your PC and start BBSAK. It will ask you a password. If you don't have a game for your device, simply click OK.

  Choose the option to wipe device. Once completed, you will be left with a blank screen and an app 507 error, which means that the wipe has been a success.

  Unplug your unit.

  On your PC, navigate to C:\Program Files\Common research in Motion\AppLoader. Delete the file in the lower part called vendor.xml.

  Connect your device.

  In this same folder as shown above, there is an executable file called Loader (has a small telephone next to him). Double click on that and it will start loading your OS.

• How can I force a reset of the device?

  My code crushes several modules and also makes changes to the Group module that contains these modules.  I then calls CodeModuleManager.promptForResetIfRequired (), but the BB do not think that a reset is required.  (I also called CodeModuleManager.IsResetRequired (), and he returned false.

  However the new modules I've written are not taking effect until after the BB is reset (I've tested by removing the battery).

  How can I force a reset of the device from my Java code?

  Thank you

  Paul

  Take a look at this thread. You might get an idea.

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=13762#M13762

  Concerning

  Bika

• BlackBerry Smartphones how reset the active device in the Desktop Manager?

  Hello

  I lost my old phone blackberry (Curve 8320) and replaced by a new (Bold 9700). I want to put the new phone as the active device for my manager to Desktoip. Whenever I connect the new phone, it is listed as "Device connected" but my old phone still appears as "active Instrument '. When I connect the new phone, it also gives me an option to change to the new company profile. But when I click on 'Yes' it still shows the old phone as 'active Instrument '. How can I reset this setting so that my new phone becomes the active device. I use Desktop Manager version 5.0.1 and I do not wish to move to 6 because I use the Desktop Redirector functionality in version 5.0.1 which is absent from the v6. Thank you.

  John,

  So I figured out how to reset (w/o call my IT dept ). In order to reset the current device:

  1. If you use MS Exchange directly: create a new profile through control-> e-mail settings panel.

  2. If downloading emails from exchange server to local folder, and then add a new pst file and make it the default.

  After making the above, restart the Desktop Manager and follow the instructions.

  Thank you.

• Aspire One speaker/headphone - no sound when the earphone plug unless the defect of the device is reset

  If the speakers are enabled when you connect headphones, headphone does not work unless I go into the control panel playback settings and change the headphones 'by default'.  Then to return to the speakers when headphones are removed, the procedure is reversed to set the speakers 'by default'.  in the Panel of reading the speaker shows option 'speak' not the typical ' speaker/headset '.  The option for headset is "helmet" that is correct.

  Is it true that the desired device should be selected by default every time?  I find it odd and very annoying.  In general the speaker option would show two 'speaker/headset' so that when plugged in or unplugged the headset you can go back between the speakers and the headphones.  In this situation with just listed "speakers" is not possible.  Anyone else having this problem.

  Once chosen as a default value, each device is functioning.  With the help of Windows 10.  Everything else seems ok.

  have you tried to uninstall your audio device from Device Manager and reboot? I know its sounds counter productive, but often, when you uninstall something, then the system recognizes that you have a device installed, it re - installs the default drivers of factorty for device of theat and Voila! It works somehow. A little nutty in how I have described, but try it, simply right click on your audio device from the Device Manager and select uninstall, it will give you a window with something like "You are about to uninstall Yada, Yada Yasda" but follow through, then restart. I have fixed this way before from udio. Don't forget to restart.

• I am trying to use a C-6 Clickfree backup device, but get a message saying: it must be reset to Windows, but when I click to reset the Reset fails.

  I associate this problem with an occasional crash and blue message indicating: detach the attempt to process valid but am not sure that there is a connection.  The computer will restart and run normally after the accident.  Reference Dell informs me that there is no hardware problem, so the problem is probably with the Windows operating system software.  The Clickfree C-6 normally work on another computer.

  Hello

  • Is that the device is detected when you connect the device to Clickfree C-6?

  I suggest you to contact the Clickfree support for the best assistance.

  Here is the link:

  http://www.ClickFree.com/clickfreesupport.php

• EA6350 not accept the password "admin" little matter I have reset the router device.

  Hello

  I just brought a new EA6350 router and it does not accept the 'admin' to connect to the router. I have reset the router and can ping 192.168.1.1. Also able to enter in the login screen. But the default password: admin has not been the success you want to connect.

  Help, please

  Hello Sir,

  I've been using google chrome to run the installation program. It failed and when I use IE and followed the same steps, it has worked well.
  You have so much

• BlackBerry classic help! How to reset the password for the device

  I tried to change my password for the device, and then I pressed cancel. I changed head to change my password.   My phone has allowed me to use my original password. The next morning, I typed my password and the phone kept saying incorrect password.  How I change my password for the device?

  When you get to 5 or 6 incorrect attempts the device prompts you for blackberry. This is a safety feature to avoid wiping the device accidentally, and also so that you can see if you enter characters, you think that you enter.

  See if the device is to invite you to enter blackberry. If so, do it and then you should power try again the password.

  And if you left the password change and that he has not really changed the password, then your password is always the same as before, no different. Be careful and make sure that you enter the characters that you intend to enter.

• iPhone iOS 5 + 10: press the button to unlock home takes 5 seconds to unlock the device

  Hello!

  Yesterday, I did the update to iOS 10 on my iPhone 5.

  Now, it takes 5 seconds to unlock my iPhone 5 after pressing the home button. It is average for a long time! Everyone even experiences?

  Thank you!

  martin_777

  It is normal for the old model of the iPhone 5. in any case, you can try to reset your device and check if it helps.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• Reset the iPhone4

  I need to reset my iphone 4.

  Home button on my iPhone 4 does not work. My screen is black but I can still hear sounds from your phone. The rings of its loading when I plug it but the screen is black. I can't reset it with itunes cause I have to disable find my iphone. What can I do to reset?

  0 following

  Hello, DudeFactions!

  Thank you for using communities Support from Apple. After reading your post, I understand that your iPhone screen 4 is completely black - but you can hear the alert sounds. You want to restore the iPhone using iTunes, but since you cannot disable find my iPhone and your Home button does not work, you are not able to. I rely on my iPhone every day, so I know it is important to get the device working again, and I'd be happy to help you!

  As the Home button does not work, I would recommend getting the iPhone physical inspection. A genius or a technician certified by Apple can fix the Home button, as well as determine what happens with your display and to provide you with an appropriate solution. If you are able to bring the iPhone to an Apple Retail Store or Apple authorized service provider, you can use the following link to find places, find contact information and plan reservations.

  Apple - Find locations

  You can also speak to Apple directly support to consider additional service options, as the service by mail. You can contact Apple support by topic on the following site.

  Contact Apple support

  See you soon!

• Find the device - MacBook Pro stolen-

  find iPhone enabled on the device and sent the lock statement. I had changed my AppleID password immediately (mistakenly?) So far, the unit never came online (3 days).  It is: I will always be able to 'see' and 'communicating' the instruction of lock for the macbook that has the old ApplieID password?  I can not reset old p/w via Apple Automation so any ideas?  Took me half a day to change all passwords app variety and devices in order to identity theft

  It - see If your iPhone, iPad or iPod touch is lost or stolen - Apple Support

• I received an error message on my iPad: the application has lost the device context when I try to open the Jam Cookie

  If someone got the error message: "the application has lost the device context? This appeared on my iPad on the application of jam cookie there is a thin red strip across a black screen with the error message locked in the red band. Help!

  Reset the iPad.  Press and hold the power and home together for 10 seconds until the Apple logo appears.